But iDVD missing iTunes in the audio section

Similar Questions

• Power went off looking at the TV Media Center. Now whenever I try to watch live TV, the program starts normally but freezes as soon as the audio starts.

  Original title: Media Center 2005 Edition

  I was watching TV using Media Center on my PC HP Media Center m7367c PC (running Windows XP Professional Version 5.1.2600 Service Pack 3) when the power went off.   Now whenever I try to watch live TV, the program starts normally but freezes as soon as the audio starts.  The audio works fine, but no picture, the small rotating circle of progress hangs and the screen is frozen.  I can click the X (close Box) and the program closes.   I expect there are only one or two corrupt files that need to be cleaned or replaced.

  HP support is to use recovery discs to clear the system and return it to the original configuration.   Given all the software, data and updates, I have to restore, I don't want to go down this road.

  I tried running SFC/scannow but Windows XP system discs are needed and the PC vendors ceased to provide systems with their PC discs there are many moons.  I bought Windows XP Professional with Service Pack 3, but he came on one drive and requests SFC disk #3 while parsing.

  I go back to the original driver TV tuner and then updated to the more recent but not joy.  I think that the problem is with a program or file Media Center.  Now when I try to configure the TV signal my cable box is recognized and then as soon as the audio lights, MCE 2005 hangs and the tiny TV screen remains black.

  I expect a file Media Center must be cleaned or reset but before I realize FUBAR I thought that he better come on this Microsoft forum and see if someone who knows what they are doing can provide the solution.

  Hi, Rudy386MS,

  Sorry for the late reply.  Do you have the problem solved?

  If Sfc/scannow solicits the disks, then you have corrupt or missing files whose analysis cannot replace or repair.  The alternative is a complete recovery of Windows.

  Open the control panel and select Media Center

  Click on uninstall

  Select the repair option

  Click next

  Click Finish when you are prompted

  See if that helps.  If not, then the recovery process will be needed

  Startup of HP systems to screen recovery (repair) when you reboot and start typing the F11 key.  According to me, that it gives you the choice to 'Fix' that leaves your files intact or 'Recover' system that will put you back to 'out of the box' condition.

  There is a Recovery Manager in the folder all the HP programs which includes Disc Creator.  You can create your own recovery discs.  I suggest using DVD instead of CD - R.  They allow more memory space.

• My mx6920 gateway upgraded to windows 7 now headphone works but no delegation cannot find the audio device

  I recently updated my mx6920 gateway for windows 7 and now, for some reason any laptop speakers will not work. The headphone jack works though. I tried to install the Audio drivers high definition on the RealTek site and was unsuccessful because windows has taught me that the driver is not the right one for the type of windows. Even when using the compatibility feature, does the same thing that I tried to use the Sigmatel drivers from the site of the bridge. These drivers ended up with the same problem. I checked Device Manager and it indicates that the audio device works. Who should ask me why do I hear audio from the headphone jack, but not the laptop speakers.

  any help you could give me would be greatly appreciated

  Thank you

  Hello

  We can refer to this article and check if that helps.

  http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=3155

  You can also contact Support technique Gateway here: http://us.gateway.com/gw/en/US/content/contactus

  Thank you.

• Missing Webapp in the admin section tab

  Hi all

  Lack of Webapp tab in the admin section was there at the beginning where we have added a few, but are no longer able to make changes to this. Account administrator rights. Any reason why this can be hidden now.

  Hayden.

  What plan you are. If you don't have the plan of webCommerce that you do not have access to web applications.

• After that I have released a video in windows movie maker and go to to watch, sometimes the video freezes but continues to go to the audio. What happens here?

  I do not understand and it makes me quite Mad... what should I do to remedy this?

  Hello

  ·          What is the operating system installed on your computer?

  ·          The same thing happens with all movies you post?

  ·          The film freezes at the same spot every time?

  ·          He was facing the same issue previously (all changes made to the computer until the problem started)?

  If you are using Windows Vista, you can consult the links below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/movie-settings-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Plays not the media, I installed a Dvd training course but my computer will play the Audio on the Dvd & videos please help solve this problem

  using Win XP Edition sp3 family

  I think that I managed to solve this problem

  I thank you for your help & help for me.

  need help is no longer.  Thank you.

  JohnXN

• Audio section of the calendar does not appear different levels thanks to the song/raw audio.

  When I drag a clip on my new chronology of the sequence it does not display audio levels as the scanner of heartbeat in the movies "beep... beep... beep...". ' lbooking thing.

  
  

  I'm trying to fade in and out on some parts of the clip but it is difficult to identify point specific tasks in the audio track.

  
  

  
  

  
  

  PLEASE HELP ME!

  
  

  
  

  ***********UPDATE********************

  I zoomed in and am now able to see the waves on the audio sections. Is there anyway that I do not need to zoom in all the way to see?

  
  

  Thank you
  

  Looks like I was able to find it! Im guessing this is normal, but I have to zoom in a bit to see, but thanks for your help!

• Impossible to install the audio driver

  Dear MS supports, im bong88

  Not sure whether here or in the Audio section.

  My MB is a Gigabyte GA-EX38-DQ6 with audio built-in - Realtek ALC889A Codec. My audio ran sporadically with win 7 32 installed, but now that I've installed the 64 bit version, I can't load the Realtek audio drivers. Forum to research and read until my eyes hurt. So I hope that someone can lead me at least in the right direction on this. Thank you

  So... you went to the web page of the manufacturer, has chosen your operating system and download the latest drivers?

  http://www.gigabyte.com/products/product-page.aspx?pid=2760#DL

  More precisely - given your current query:
  http://download.Gigabyte.us/filelist/Driver/mb_driver_audio_realtek_azalia.exe

• Help! Cannot save the audio intelligible using AP 10 Audio (Please read for more details)

  I am trying to record audio by using the Audio recording feature in Adobe Presenter 10. I'm using a USB microphone, but when I try to record, all I get is a lot of confusing noise. I tried recording using the parameters of "Mic" both "Line In", but neither yields anything intelligible (although the option of audio product line is just a little more intelligible). When I use the Mic setting and the box to "Check the input level", nothing happens to the "meter" as I read the test sentence - it seems that AP 10 does not recognize that I have even a connected microphone.

  But here, this is where it gets particularly weird... I have no problem recording beautiful acoustic clear using this same microphone when I use the function of video recording of AP 10! Certainly, this does not seem to use some sort of separate component 'Add-on', but, again, if this component can recognize my mic, why not request 'base' of Adobe Presenter? (I also have no problems to import audio files, but it is something else entirely.)

  Unfortunately, my company is not subscribe to an Adobe service contract (they are insanely expensive for what maybe once or twice a year thing) and I'm not allowed to buy a single support call (also very expensive). So, I hope that someone here might be able to help me, how I have helped so many people on similar forums in the past... I hope above all a kind of quick response, I am supposed to do the demonstration of this software to several potential buyers of this software in my organization and they are particularly interested in this specific feature piece (since they use AP to register a nickname-"podcasts" that employees can access from our Adobe server).

  Thanks in advance!

  Laura

  P.S. If it helps, I use a laptop Lenovo running Windows 7 and uses Adobe Presenter 10 with PowerPoint 2010. I use a Plantronics DSP400 USB microphone (which, as I said, works very well with the AP video recording application).

  Okay - problem solved. Here is what happened this morning...

  I started my computer cool (as I do every morning... I always stopped at night). I plugged my microphone before start PowerPoint at all. I started to PowerPoint, grew up in the presentation, I wanted to do the test recording on and you click on the folder option in the Audio section. This time, while the level control came and I talked, it was record green so I thought, "Yay - fixed problem! Not so fast... When in fact I recorded something and played again, it was still confusing and unnecessary. Then I thought: "maybe he's still looking to pick up the audio from the built-in microphone, rather than the USB microphone," so I pressed the button muting the microphone on my laptop (hardware button). I noticed presenter thingy recorder shows the mute symbol, who confirmed that he thought it was the microphone should I use (even if, in the settings, I had the USB microphone than 'active'). So I went to the control panel sound and actually disabled the microphone press the mute mic (that I had supported before) equipment to uncheck the mute. Then when I returned in the presenter and tried to save again, voila!, it actually saved my USB microphone and everything was kitties and rainbows!

  So, if someone else is the same problem and reading this thread (which is the main reason I came here to document all of this), the solution is in fact completely disable the microphone and, possibly, also make sure to connect your USB microphone before launching PowerPoint. (Not 100% sure that the second part is necessary, but it certainly cannot hurt...)

• When I try and add the audio to a button, captivate crashes

  Hello

  I tried several times to add an audio button / click on the box and whenever I do, captivate goes down and I use the Task Manager to terminate the program

  I am using captivate 6 and I run as a normal mode and as administrator and I get the same question at a time.

  I have insert a button / click on the box and then on the property inspector Panel I click Add audio (in the audio section) and then it does not allow me to do anything else. Help, please?

  Ok. Try this.  When you click on the button Add Audio and Captivate freezes, try to hit ESC on your keyboard to computer.  If it seems to bring Captivate in your control, your problem is that the Audio object dialog box which should appear to allow you to specify the audio file is located somewhere off the screen where you can see it or interact with it.  It is a known issue for several versions of Captivate now due to the use of multiple monitors when the user changes their configuration to monitor at any given time.  You must re-create the previous monitor configuration so that you can find the missing dialog box and drag it to the main window.

• What's UP with the audio tracks on the timeline?

  I'm faithful user of Final Cut Pro, but I had to order a Windows compatible software for video editing for work, so I'm Adobe Premiere CS4 (I couldn't download CS5 on my computer because it's apparently a system of 32 bytes, not a 64... go figure). And I add the titles to the audio section of my first project and I noticed that he was going to let me NOT move my pieces anywhere I want on the timeline. He mixes them all the way up to the similar Audio track 5 automatically instead of track 1 (unlike the video that it is connected to is on track 1). I find it's confusing. I've read about it and this is apparently because the tracks automatically arrange them according to the type of audio, they are (mono, stereo, 5.1). So I thought OK, it is illogical, but I'll change them. Alas, I have not yet found a way to change the type of audio tracks to ask here. It's the first buffet. How can I change this?

  The second thing I have is that I have a mono track that only play on a player, of course. In Final Cut Pro, you have a few options to change it and it is easy. This program, I can't find a way to solve this problem either in the program itself or on the web. How can I change a mono, track to a stereo speaker, two channels of the speaker?

  Any help would be better appreciated.

  Q1: http://www.video2brain.com/en/videos-4009.htm

  Q2: I can usually hear mono files on two speakers. Maybe it's a file of two channels with only one filled channel. If so, use the effect of audio complete left or right.

  Welcome to the forum.

• "To drag the Notes" section when the tab 'Edit' does not open

  The arrow button that activates / deactivates the open 'slide notes' & closed does not open when, on the tab 'change '. He moves to point upwards and downwards, but it won't open the box to display the text of the notes! In addition, it works very well on the legs of the table of Storyboard and branching and will appear under the Audio section / recording as well. It worked last week, but not today, when I opened the same Bill... ideas?

  Hello

  I've seen this problem on a number of occasion. In most cases, I found that Captivate closing and opening it again normally are good to go. If this does not work you can try

  a. rename the Captivate.dat file which can be found in the following path:
  C:\Documents and Settings\nom_utilisateur\Application Data\Adobe\Adobe Captivate
  b. loading Captivate again.

  The .dat file contains many of your personal settings, and sometimes can be damaged. Rename the original copy and loading Captivate forces the application to create a new .dat file.

  If it does not yet solve the problem you can either:

  a. re - install Captivate
  b. report the problem using the
  Feature request/Bug Report Form]

  Kind regards
  Mark

• Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

  People,
  I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
  It will read fine data disks, but refuses to play with the audio CD or video DVD.

  I tried to uninstall & Re-Installing DVD - RAM Driver;
  That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
  He now just doesn't see the drive. Someone at - it ideas?

  I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

  I found a thread in this forum that describes a similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

  Sometimes this error is displayed because the player does not support the environment.
  Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

  Maybe the drive is defective and can not calibrate lens in the right position.
  But this laptop is not very old, and I can't imagine that the drive is defective
  However, nothing is impossible.

  What you can do is to carefully clean the lens and see that it will help.

• Cannot access the audio settings

  Hey everybody. Today I plugged my headphones in and waited for chip connect disable audio clear more because it's hurting my ears with headphones... He didn't do it, I tried to turn off manually but I couldn't access the audio settings in the music app... He just wouldn't do anything when I clicked it, then he said this: https://www.dropbox.com/s/c7drv4nf6o0pydg/Screenshot_2015-09-22-13-34-25.png?dl=0 and when I go to settings, audio, audio settings, it still says the same thing... I need help, I restarted my phone like 5 times to no avail... And I checked the running applications, and there is nothing that would make this...

  Thanks in advance

  Hello raul, it seems that you have downloaded an app enchancing equalizer or sound that prevents you from using the audio settings by default. Please check the app and delete it and try again.

• My audio is on the Audio Digital (S/PDIF), and I have NO SOUND.

  The problem is started when installing windows 7 on my desktop, or when installing a new audio or video card I'm not positive exactly when it started to happen. But all of a sudden the audio device only I got was Audio Digital (S/PDIF), which in fact did nothing.

  I figured out how to get the speakers on my monitor to work, I plugged the speaker cable into the port 'in line', blue and stakeholders have worked.  The cord is green light... the port is blue... it doesn't look right, it seems that it should be in the green port right? But it does not work like that.

  Anyway if I plug the monitor or headphones on in blue 'line' port it affects my speakers 'Speakers' "high definition Audio Device".  And I have audio.

  But I need to have a microphone that works as well for a class I have. But when I plug the headphones that it doesn't work, it doesn't recognize the microphone or even acknowledge that I plugged anything.  The helmet part works by plugging in 'line' port, but the microphone does not work.  He said that the recording device is set to Audio Digital (S/PDIF) and nothing else is listed in Device Manager.

  I have seen this problem posted elsewhere and I followed a lot of steps, I tried to download drivers realtek, windows update, update drivers for my Nvidia graphics card, and I even download Everest to be sure of my Audio device. It's what came SigmaTel STAC9220 A1 @ Intel 82801 GB ICH7 - High Definition Audio Controller [a-1].  The link to update the drivers was useless, but I looked online and found one on the site of Dell, he said it was for Sigma Tel STAC92XX... which should include mine.  I downloaded it, rebooted, and all of a sudden I got no. AUDIO DEVICE AT ALL.  Windows said I had no sound, and he tried to install the drivers, although I'm sure that I had done that we found my Sigma Tel Audio Controller.  Windows cannot install the, then suddenly he tried again and said it was successful.  But I'm right back where I started, still consider the Audio Digital (S/PDIF) is my recorder, speakers do not work unless it is plugged into the blue port in 'line '.   Nothing has changed...

  If anyone can help please let me know. I appreciate it.

  It happened to me, I just unplug and reconnect the plug and she is back to normal