Help! Cannot save the audio intelligible using AP 10 Audio (Please read for more details)

Similar Questions

• The difficulty to do a clean install of windows 7 Professional. Please read for more details.

  Well, here's my situation...

  (1) purchased a computer with windows vista (32-bit) on it earlier

  • Did not get a recovery disk.
  • There is no 'sticker' on the computer indicating the type of vista (home etc.) or the product key.

  (2) used my student account at Microsoft to buy Windows 7 Professional 32 bit

  • I have the product id and product key.
  • I burned the ISO image to a disc (the disc has now lost) and ran it by restarting.
  • I chose the upgrade instead of the fresh start option since I wanted to keep my files.
  • Everything worked well.

  (3) my computer is slow because this year, I had downloaded a lot of software. Instead of uninstalling stuff, I recorded all important files on a disc and completely erased from my hard drive to a new beginning. I took measures

  • Created a system repair disc.
  • Downloaded the software used to wipe my hard drive - Boot and Nuke.
  • Engraved Boot and Nuke on a disc.
  • Ran the disc by restarting.
  • Boot and Nuke wiped the hard drive successfully.
  • Inserted the repair disc Windows 7 that I created earlier and rebooted.
  • Went through steps, nothing not arrived and began to receive an error message.
  • Learned that I needed more than the floppy disk repair.

  (4) my troubleshooting and what I tried

  • On another computer, I downloaded the iso image of Windows 7 Professional SP1 32 bit and it burned.
  • Ran the disc by restarting.
  • I got to the screen to enter the product key and I did it, but he said that "the product key is invalid.
  • Discovered that I have a key for Windows 7 Professional 32-bit (but not the SP1 version). So I downloaded the iso for the RTM of Windows 7 Professional.
  • Ran the disc by restarting.
  • I got to the screen to enter the product key and I did it, but he said that "the product key is invalid.

  Quick review:

  (1) I have the product id and the product key for Windows 7, I bought with my student account.
  (2) I do not have the version of Vista that was installed at the factory and did I not the id product or the product key.
  (3) I tried the product key Windows 7 Professional 32 bit I have with the SP1 and RTM version without success.
  (4) I am 100% sure that I'm in the keys properly. Without typos.
  I don't know what I can do. What I am doing wrong? Is there hope for my situation? I don't want to spend money so please do not suggest buying another copy.
  An explanation I can find is that I actually purchased the Windows 7 Professional 32 Bit update.  If this is the case, what are my options?  I recently explored microsoftstore and recently found a Windows 7 Professional Upgrade sold to students it might be what I bought.  So, what should I do?
  Edit:
  I remember that one of the reasons why I want to get Windows 7 Professional was because of Aero and the only Windows Vista who have not Aero has Windows Vista Home Basic is the type of the operating system has been installed at that time, but I still have not the product id or the product key for this factory installed OS. Personally, I removed the sticker at the rear of the laptop thinking hey what I need at the moment? I don't have Vista any more I have the product key for Windows 7 that I just bought.  But now I need it. :/ I hope someone has a solution out there.
  Thanks in advance for any suggestions and help.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I AM USING WITH MY HP DV9500/9650US screen problem READ FOR more DETAILS

  I thought that posting this here because my response was the way down on page 63 of the original post for those of us with problems screen with dv9500/9600 models.  Mine has 2 stickers, 9500 and 9650u, so I don't know who to call, that did not matter because I have had contact with the best guy, as far as I am concerned HP!  Mathew Camden offered a solution that I could live with and not let me for the full price of the repairs.  In addition, I got a full extended warranty for a year!  Slow to come, but I could tell that Mathew "has me" when I tried to explain what is happening here.  Apparently, HE's the guy (or one of) talk while HP understands that there is a big problem.  I give more information on how to get help below.  The drop box must be here in 2 days.  I am happy that I was seriously looking at new laptops.  My thought was that Dell has some laptops starting at $ 500 and, although not as nice as the model that we have, at least, it would be in working condition.  Not that I want to spend this money right now, but I was running short of choice.  I'm happy that I don't have a car, the truth is, I LIKE really this laptop until he started running slow and finally 'crapped' as my husband says.

  "Ok, I had some success.  I hope this helps the rest of you.  Here is what happened:

  First of all, I called 1-866-671-7362.  No good resolution.  Was transferred to the "Mark", who refused to give me any help or even transfer me to anyone who could possibly.  He kept repeating that my laptop was out of warranty.  Well, I know that, we all do!  I told him about what was happening on this forum, and he continued to be indifferent to issues that these customers have.  I called back, thinking I could get a new person.  I asked to speak with a case manager once again, I specifically said the person that I didn't "Mark" once again because the conversation was not good.  Well, guess who I had once again, "Mark."  You don't have to bother with them, he does not support it.  I don't think that the Center to this number is still here in the USA, but in India, it's why THEY don't CARE, that many find.

  After some research, I called 1-800-756-0608, option 7.  They ARE in the custody of the United States and ILS DON'T.  I was greeted by a very nice lady, I forgot her name but she was in the Executive Service.  I was transferred to Mathew Camden and he HELPED me!  I told her about this forum and everyone here having the same problem right about 18 months after the purchase.  He presented a very reasonable and fair offer.  He offered to sell me an extended warranty for a total of $162,29 and then dealt with a free repair under this warranty.  This warranty is for 1 full year.  I am satisfied.  If only I had taken this answer at first.  It took me over a month to get the right answer, but I'm glad that I stuck to it.  Because I have a full warranty for one year from today, I am happy with the price tag of $162,29.  If she died this year here, I can get it fixed.  It covers ANY matter coming more than telephone support!

  Apparently, you must be able to get to the right person.  Problem is that people of "other number" don't give me that information and I felt "stuck" and extremely frustrated, angry to be honest.  I guess this is my next question, how the average person knows "good number" to get their issue handled.  Fortunately, I came across it.  I'm writing it here for all people in the same situation to get help.

  MATHEW THANKS! He gave me his direct number and let me know he will personally supervise this repair and make sure that it goes as it should!  It does not help redeem HP slightly.  HP is a great company and it's just a guy.  To bad, they no longer have 'Matthews' at the end of the phone.  I'll just make sure to cling to this department number, in case I decide to buy HP in the future.  Wow, what a difference a single appeal filed. »

  Message edited by mommaK 07/28/2009 23:52
  K

  Great to hear that you have a resolution! I hope that others will benefit from your sharing of this experience.

• Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

  Had sent the message about the Blue error screen.

  Has been asked for more details.

  I hope this helps.

  BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

  BCP3: BF90DB41 BCP4: 00000000

  OSVer: 5_1_2600 SP: 3_0 product: 768_1

  Hi VASANTHFERNANDES,

  ·         You did changes to the computer before the show?

  ·         When exactly you receive the blue screen error?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Disconnect all external devices and check if the problem persists.

  Method 2: Start the computer in last known good configuration and check.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  Demystifying the 'Blue Screen of Death'

  http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

• users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  I am the Director of technical support for more than 1000 computers. Recently in some computers (windows based) users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  Hi MASPAdministrator,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Errro: Cannot save the Terminal Server when he tried to use the program Sony Vegas

  Original title: cannot save the Terminal Server.

  I'm having a problem using my program "Sony Vegas". It worked OK. But now gives me an error. "Cannot save the Terminal Server. I don't know if this a problem of Windows, or Sony Vegas. Please tell us how to solve this problem. Thank you.

  Hi barnstable,.

  Try these steps and check the result.
  Step 1: Check if the Terminal Services service is disabled
  a. Click Start, click Run.
  b. type services.msc, and then click ok.
  c. in the list of services, double-click Terminal Server Services.
  d. change the startup type to automatic and start the service.
  e. click ok to apply the changes.
  f. check if the problem persists.

  Step 2: If the problem persists, uninstall and reinstall the program Sony Vegas
  see How to change or remove a program in Windows XP .
  b. Once you have deleted the program, restart the computer.
  c. reinstall the program.

  For additional support, get in touch with Sony support team.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot save the schema using the client - crashes ' start record contour.

  All,

  I use version 9.3.1 (yes I know we should be upgraded) and EAS installed on my machine (not web-based version).  For some reason, my computer crashed last week so I had to reinstall EAS.  After I did, I started having the problem of not being able to save a scheme and it gets stuck on the "start record sketch."

  It is not a java problem, that I'm not using the web browser.  In addition, a colleague has the same version of java and isn't in trouble. Also, I got this version of java (1.6) on my machine for months.

  Any ideas.

  Thank you

  Check: Cannot save the schema with Essbase Administration Services and Version Java JRE 1.6 (Doc ID 847487.1)

  It indicates that the client computer does not have the supported JRE versions.

• Movie Maker error: cannot save the movie to the specified location.

  When I wanted to save my movie on my computer, I received an error at 0%, it is said:

  "Windows Movie Maker cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again. »

  There is nothing about it, I even 20 GB of free space, the video is only 1.24 MB. and files original source is always available.

  Someone HELP me please! I use Windows Vista Home Basic.

  original title: Windows Movie Maker 2.6 problems during the recording of movie files

  There are to many free converters that you can
  downloaded on the net, but for a few
  MP3 files... There are free converters online.

  The following site may be worth a try:

  Convert online
  http://www.online-convert.com/

  Open the drop window in the field of Audio Converter.

  Select... WMA

  In the next screen, left click on the Browse button and
  Navigate to the MP3 you want to convert

  Left, click Convert.

  When the file is converted will prompt you to
  download it.

• Cannot save the attachments

  Original title: RECORDING of the parts JOINED IN VISTA

  WE CANNOT SAVE THE ATTACHMENTS. DOWNLOAD THE MESSAGE ERROR SAVING ATTACHMENTS. CHECK DISK SPACE. FILE IS NOT EVEN 80KO. These are PDF files.

  Thank you

  JO

  Try to compact and repair the database with this tool.
   
  
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx
   
   
  If this does not help, what security program do you use? Norton & McAfee are known to cause this problem. Restart and turn off your security program. Open WinMail and see if the attachment opens in your PDF reader.
   
   
   

• Cannot save the settings of e-mail from SAN HQ

  I used to be able to turn the notifications specific to the HQ of SAN.  I've updated a few times and had not tried for a while but now I can do it no longer.  When I try to disable an alert I say pop-up error: "cannot save the e-mail settings.  The SAN HQ was unable to save the message view recent changes.  Unable to save changes made to the Group (group name) because of insufficient access permissions or administrative credentials.  Verify that your account has all required permissions and administrator-level access to update the selected group. "Then I me it is a question of perm but don't know where.  SAN HQ connects very well to all my reports and datasets, etc.  Where would this leave?  Any help would be greatly appreciated, thank you!

  Your user and group must have all the permissions for the install directory where SANHQ has been installed.

  I'll try again with a local administrator account vs account domain.

• CS6 flash cannot save the document

  I post a new discussion of that since I couldn't find an answer for this in a Windows computer. I use Windows 8.1 and Flash CS6 using creative Application of cloud.

  Whenever I try to save a FLA document, it gives an error saying it "cannot save the document as [name of file] try to change the file location or file name.

  I do not work on a network, but have been save the file to my desktop and it back to my network file when I am done Edit. But now its happening even with the local files on my desk. Did anyone else encounter this problem or found a fix?

  Hey mediachic,

  We did a lot of troubleshooting for this issue, and WITHOUT help from Adobe, which support so that never. They just repeat what they don't support networks and advise to do not open or modify files on a network because he may / will cause corrupted files and not allow you to save. Try to save the file to a local drive or a flash drive and work on the project from there. So far, it is the only work around that we found for this but it isn't bulletproof. We have still a few users who are breaking in flash but not as often. In addition, make sure that there are no updates waiting for Flash if it is updated to Flash and reboot. Hope that helps. Good luck!

• Cannot save the file photoshop cs6

  Cannot save the resolution 1024 x 600 pls help this is a trial version.

  Hello! In view of the fact that you say that it is a trial version, I think you're using CS6.

  I think that somewhere, you entered a dimension with the bad units: If you type in 1024 x 600 inches, but select, your document may be huge (it is 1024 * 600 * [the ppi you selected] pixels, instead of 1024 * 600pixels.)

  

  Beware, if you select the size option and the resolution in the crop tool, to use pixels as value if you need a document of this size (to crop to a certain size, you can use the size option and the resolution in the drop-down list in the Crop tool options bar):

  

  In case you are using an older version of Photoshop, be sure to type in the correct unit in the crop tool options bar, it will give you a fixed pixel amount, even if the resolution is set at 72 or 300 ppi:

  

  Here is a useful Photoshop Elements Help file on resolution: http://helpx.adobe.com/photoshop-elements/using/resizing.html

  Or the equivalent support for Photoshop file: http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7945a.h tml

  I hope this helps!

• Cannot save the no http bookmarks in firefox

  Cannot save the no http bookmarks in firefox

  Among the Favorites of standard Web sites registered on my IE toolbar, I have several of my own making html documents/pages. These start obviously by a non-http address.

  Include pages that contain an array of webcams on one page or a page that opens several sports venues each in their own tab, or strip of video covering windows live tabs stormchasing chase, weather radar, scanners of emergency etc etc.

  An address would take the format on the lines of
  'C:\Documents and Settings\All Documents\Football results and Tables\UK.html'

  Firefox insists on adding "http" before the C:\ (and unlike IE, it also adds the %20 for space.)

  Can someone help get FF to accept a favorite that is not a Web site.

  It's ok I just solved it me, waived the need to type %20 for each space.

  Need to add before c: the following

  file:\\\

  So a sample address

  file:\\\C:\Documents and Settings\All Documents\Football results and Tables\UK.html

• HPDM 4.6 SP4 cannot save the files deploy subtask

  Recently, when you create a new task to deploy a file and try saving it I get:

  "Cannot save the subtask to deploy files.

  If I create another type of task it saves without problem. The only time where there is a problem, is if I am trying to add files to my task. If I try to add a file to an existing template, I get the unable to merge the error of the model.

  I have checked the permissions in the main repository, run the test, all come back fine. I even tried manually adding files to the repository and that's ok too. I can't find something as interesting in the newspaper. I should mention that we did a database migration recently, but I test all features and managed to save a task of deployment without problem.

  Try to get out of the individual tasks that contains files (in this case the msi Hotkey filter) I get the following:

  2015-07-03 14:08:21 [error code: 5260288] [Module: MasterController] [category: input/output disc] 2015-07-03 14:08:21 [error details]:.\SyncTask.cpp@91: failed to sync files. .\port_layer\ftpclient\fileclient.cpp@816: failed to get the data from the file. .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : D:\HPDM/Repository/Files/ToDeploy\Hotkey filtre.\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  In the masterrepository log:

  2015-07-03 15:14:28 ERROR could not remove the package: Test. \port_layer\ftpclient\fileclient.cpp@235: has no file stat, RemoteDir: / files/repository/ToDeploy, name: Test.
  .\port_layer\ftpclient\fileclient.cpp@390: could not get the file stat, RemoteFile:\\10.7.1.29\HPDM$/Repository/Files/ToDeploy.
  .\port_layer\ftpclient\ShareFolderClient.cpp@424: has no file stat data.
  .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : \\10.7.1.29\HPDM$/Repository/Files/ToDeploy\Test
  .\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  2015-07-06 09:11:44 CTaskReceiverThread::recvTask() of ERROR: unable to receive data from ssl server.
  2015-07-06 09:11:44 CTaskReceiverThread::recvTask ERROR failed. Returns the value-1.
  2015-07-06 09:12:10 sendReoprt() of ERROR: unable to send data to the server.
  2015-07-06 09:12:10 CReportSenderThread ERROR::recvTask(): could not receive data from ssl server.
  2015-07-06 09:12:10 ERROR CReportSenderThread::recvTask failed. return value = - 1

  10.7.1.29 refers to a repository of the child, I have about 30 repositories of the child.

  I have not changed any configuration, I don't really understand how this happened, I can't even create my first Contact rules, scheduled tasks or create new tasks/templates. We are in the midst of a large-scale deployment so that any help ASAP that would be most appreciated!

  Thank you

  Luke

  This has been resolved with the help of Chen_HPDM by e-mail.

  We changed the console.conf to:

  HPDM. NEWSPAPER. LEVEL = DEBUG

  (console.conf can be found in C:\ProgramData\Hewlett-Packard\HP device Manager\Console\conf)

  I ran the task to deploy the files again and had the following in the log:

  2015 07-09 09:43:41 [WT-EventQueue-0] DEBUG Console - Request (20201): add templates

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20201): Add models [true]: 86

  2015-07-09 09:43:42 [WT-EventQueue-0] TemplateManager DEBUG - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015 07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - Request (20202): update of model

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20202): update model [true]: 142

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:45 [Thread-43] DEBUG MPFactory - Call TemplateMP.

  2015-07-09 09:43:45 [Thread-49] DEBUG TemplateManager - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015-07-09 09:43:45 [Thread-49] TemplateManager DEBUG - processUpdateTemplate OS = HPWE8_64, name = New Test, category = files and the registry, status = failure, tip =

  The Console could not delete a temporary file created previously called HPDM_Temp. I renamed the file and was able to create the task.

  I can't wait to find my question on the forums, and someone didn't post the solution so I hope this helps and thanks again Chen!

  Luke

• Cannot display the page XML cannot display the input XML using the stylesheet XSL, how to fix?

  How can I fix this error code:

  The XML page cannot be displayed

  Cannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.

  System error:-2146697211. Error during processing of resources "file:///C:/Documents and Settings/a/desktop/SMART.xslt.

  The operating system is Windows XP Home Edition.  I use browsers IE 8, Safari and Mozilla Firefox.

  I'd never see this error until I installed HDDScan (http://hddscan.com/), a diagnostic utility, to check my hard drive.   The test is a S.M.A.R.T. analysis and produces this error message when you use this software.
  A web site indicates that installing Microsoft. NET Framework can solve this problem.  I already have this class in Add Remove Programs: Microsoft .NET Framework 1.1, Microsoft .NET Framework 2.0 Service Pack 2, Microsoft. NET Framework 3.0 Service Pack 2, Microsoft .NET Framework 3.5 SP1, Microsoft. NET Framework 4 Client Profile.
  Is the problem, a missing software program or a corrupted file?  What is Microsoft. NET Framework?  I use selective with most of the disabled items in the services (except hide all Microsoft) and start more disabled under Startup.  Is there something that needs to be checked to activate a service or start to correct this error message?
  How to solve system 2146697211 errors: cannot display page XML cannot display the XML input using the XSL stylesheet?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. Please post your question in the MSDN forum. You can follow the link for your question.

  http://social.msdn.Microsoft.com/forums/en-us/iewebdevelopment/threads

  Hope the helps of information.