Button as a switch with logic gates.

Similar Questions

• This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switchi

  This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switching autour.

  If you have symbols of button on the stage to the next and previous, each of these symbols has an instance name with a listener event attached to it. The event listener is linked to a mandate. You can have a single event point to a function. So for example, if you have a next button and a click event that points to a function that says something like nextFrame(); and then you want to use the next button to point to a function that says something like nextScene(); you will need to use another instance of this next button and have this different instance to use a different event handler to point to a different function. Who help me?

• Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)

  Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)?  I contemplate moving to Sierra, but not if it comes into conflict with Logic Pro.  Can someone advise?

  Thank you!

  Matt

  It was reported a number of not being able to save or to new projects with the title of the Sierra.

  I would conclude some time if I were you, especially if everything is working well at the moment.

• can I use a mixer speedboat with logic?

  I use an interface Apollo Twin Duo, two only puts them don't monitor and output two lines, with Logic Pro X, no problem.

  However, from time to time, I would like to mix on a real mixer, so I can stop watching the screen both for my eyes.

  I'm not interested in a DAW controller, I had one and it comes back.

  I just want to know if he is in any case that I can connect to an office of channel 24 or 32 for my Duo Apollo mix since the projects that I have already recorded in logic?

  I know that PreSonus have published a number of new desks, these would work? or any other recommendation to office?

  Hello

  kerochan wrote:

  I just want to know if he is in any case that I can connect to an office of channel 24 or 32 for my Duo Apollo mix since the projects that I have already recorded in logic?

  To do this, you need an audio interface with more than 2 line & 2 outputs to monitor that has your current interface.

  TDC

• My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  Is there another way to start the IPAD?

  Try the steps here:

  https://support.Apple.com/en-us/HT201412

• Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe can be done if anything.

  Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe

  What can be done if anything.

  Pages that use "mixed content" (parts of the use of the HTTP page and some use HTTPS) are not secure against tampering, they will not display the site identity button. To resolve this problem, make sure that external resources you are incorporation are available over HTTPS and you use HTTPS to nest them.

  For example, to iframe widgets like the Facebook 'Like' buttons, make sure that your iframe use src = "https://192.168.1.20 /...". »

  See also discussion here: http://stackoverflow.com/questions/3587021/facebook-like-button-breaks-https-ssl

• VMware Distributed Switch with VLAN

  Hi again,

  A lot of work with VLAN now.

  But just a quick Questions. Is there a documentation or HowTo Guides how to set up vSphare VMware Distributed Switch with several VLANS on a Switch GS724Tv4?

  

  But soon, I try to add a host or network, it is empty.

  This is probably an easy problem of VMware, but I try here first to see if someone has document guide HowTo so I can start with.

  Thank you

  Christian

  Never mind about this,

  I found the problem on my own, but perhaps a documentation would be great to have. But it's a good start to have the right license of VMware, before you start.

  * I was just out of luck when I thought *.

  / Christian

• How to sync the button in the mainVI with a Subvi round?

  (1) son?

  (2) global variable?

  ================

  I want to stop some programs in Subvi execution by pressing the button in the mainVI. How to connect the button in the mainVI with a Subvi round?

  (1) son?

  It does work if I connect the button with the cycle via cables and connectors (from mainVI Subvi). That's because by the time press the button, Subvi has already asked the value (and it's remaining = FALSE until the Subvi ends).

  (2) global variable?

  I basically got same result.

  The position of the button is transferred to mainVI Subvi, but delayed.

  (3) the only solution I've found so far is to completely remove the Subvi and paste its code in the mainVI.But is not a good solution, because the code of the Subvi runs several times in a different parts of the mainVI.

  Thank you

  Solution: use a reference.

  Create a reference to the button in the main vi (right click on the button and select Create - reference).  Create a control on the front (Refnum palette - Refnum control) reference in your Subvi.  Connect refnum to a terminal.  In the main block diagram, wiring in the control reference at the entrance of reference Subvi you just created.  Subvi block, use node property to get the value of the order.  This will be a Variant, but you can use the variant data to convert it to a Boolean value.

  What is happening is that the reference that you pass to the Subvi is in fact an address (pointer) at its location in memory where the value is stored.  For example, when you click the home button, the value at this address gets changed.  Subvi, the property node can read the value at the same address because it is the address that you have spent in the Subvi.  If an instant change at hand is read by the Subvi.  Similarly, you can display an indicator of the Subvi for the most part, and it will update without having to wait until the end of the Subvi.

• Configure BEFSR41 V.2.1. to use as switch with ADSL ZTE Modem in Bridged mode

  I found a thread of 2009 who has a link that could help me with this configuration, but the link does not work.

  I have a Linksys BEFSR41 V.2.1 and need to set it up, so I can use it as a switch with our ZTE 831 ADSL Modem, which is in bridged Mode.

  The IP address of the BEFSR41 changed to avoid a conflict with the address IP of Modem ZTE ADSL, which is 192.168.1.1 to 192.168.2.1.

  If the PC is connected directly to the ZTE ADSL Modem, I can access the Internet and I can access the Menu of Configuration of Modem ZTE.

  If the PC is directly connected to the Linksys BEFSR41, I can access the Menu of Configuration Linksys.

  If the PC is connected to the Linksys BEFSR41, and which is connected to the ZTE ADSL Modem, I can't access the Internet, and I cannot Ping the ZTE ADSL Modem.

  Please give me a URL that indicates how the Linksys BEFSR41 should be configured to use as a switch with my ADSL Modem from ZTE in bridged Mode.

  My belief is that after I have the Linksys set up, I then plug the ZTE ADSL modem in the Linksys unit and use it to DHCP.

  DRM for your time and help! Lanny

  1. I never told of any change on the Advanced Routing page.

  2 do not connect the internet port for ZTE with this kind of configuration. You cannot use the internet port.

  3. Once you set that you can use the remaining LAN for ethernet devices ports in your local network.

• The icon on the desktop next to the Start button and the switch between the windows on my Quick Launch bar key are missing

  Original title: Millagail

  Hello

  The desktop next to the Start button icon & him switch between windows button on my quicklaunch taskbar disappeared, how I find it & put it out there so I can see the desktop between the screens.

  Thank you very much

  There are a few tips here.

  http://www.petermartinconsult.supanet.com/computer/Windows/ShowIcon.htm

  First check the trash.

• What are the bare minimum commands to get a stack of PC6825 3 - switch with inter switch Link Aggregation?

  I am brand new to PowerConnect switches, even though I am familiar with the concepts of VLANS, aggregation of links and spanning tree.

  I am on a deadline to get some new ones installed 6248 in our baskets and get them functioning as a stack. What are the bare minimum commands for:

  • Three switches in a stack (master/Eve/member)
  • 2 ports grouped between each (total redundancy) switch with loops WITHOUT switching

  All the switches are running firmware v3.3.9.1 (January 2014).

  Thank you

  The range of interface Ethernet 1/g1-1 / g2 allows you to select the ports you want in the channel of the port. Page 293

  Channel-group 1 Auto mode to create 440 lacp lag page

  Select the Group of channels with interface port-channel 1

  Switchport page 601 in trunk mode

  Switchport trunk allowed vlan [VLAN you use]

  http://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/PowerConnect-6248_Reference%20Guide_en-us.PDF

• dedicated on microsoft 4000 keyboard back button does not work with firefox

  Hello-

  I have a microsoft 4000 keyboard.

  He dedicated the buttons back and next to the navigation of the browser: http://xahlee.info/kbd/ms_keyboard/i/ms_n4000_keyboard_LED.jpg

  the back button does not work with firefox

  other info: the next button does not work with firefox. buttons next and previous works with IE, tor and chrome. the keyboard shortcut for back in firefox (alt + left arrow) does not work.

  I've tried clearing cache and cookies and start firefox in safe mode.

  advice?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions only by using the back button in the Firefox browser.

  But I would like more information on this topic in order to help you.

  (1) the back button worked before with Firefox?

  (2) don't you make changes before this problem?

  According to your description, there is no problem with the material since it works with Internet Explorer and Google Chrome. Previous key does not only work with Firefox. Therefore, I would advice you to check with Firefox and see if that helps, because they have more expertise on products here to help you better.

  Support for Firefox

  https://support.Mozilla.org/en-us/products/Firefox

  Hope this information is useful. Please write us back for assistance.

• Operating a SG200-08 switch with case removed.

  I'll put a SG200-08 (8 port switch) within a 2U rack mount chassis.

  To improve cooling I thought I'd take off the outer case.

  Is there or are there problems with the help of the switch with the cover removed?

  Thank you

  Glen

  Hi Glen, the first question would be, the warranty is voided and you are not entitled to any help. The second question is static electricity and environmental concerns. The third question would probably be your property insurance.

  He is strongly against the recommendation to alter or change these units.

  -Tom
  Please mark replied messages useful

• Are there plans for the new ESW 500 models switch with PoE capability?

  I know that current models of ESW 500 switch don't have enough capacity to power all the switchports to 15.4, even if the ESW-540-8 p model has almost enough capacity to power all the switchports to 15.4.

  Reasons why new ESW 500 switch with PoE capacity are necessary:

  • The existing PoE 500 ESW switches have not always enough when these devices are deployed with the UC500:
    • 7945, 7965 and 797 x phones
    • series phones (not yet supported with the SBCS solution) 9900 and 8900
    • PVC2300 Surveillance Cameras
    • AP541N access points
  • The UC560 comes with all the PoE ports and requires at least an ESW switch be deployed
  • Version 48 ports gigabit switch ESW is currently available only in the version not PoE, and we need a version of 48 gigabit ports for users of the UC560 solution.

  Existing ESW 500 switch PoE capabilities are:

  • ESW-520-8 P: 60W
  • ESW-540-8 P: 120W
  • ESW-520-24 P: 180W
  • ESW-540-48P: 380W
  • ESW-540-24 P: 280W

  PoE of ESW 500 switch capabilities supporting 15.4 full power on all PoE PoE ports are:

  • 8 port: 123.2W
  • 24 port: 369.6W
  • 48 port: 739.2W

  Are there plans to release the new ESW 500 switch models increased capacity, enough to supply the full 15.4 to all PoE ports with PoE?

  Hi John - Thank you for your participation in the small community of business support. I talked to our switch product manager and want to share his response.

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  We have taken the conscious decision to deliver PoE as ESW and other switches for small businesses for several reasons:

  • Endpoints PoE more attract a lot less than the 15.4 W maximum power. Most IP phones are below the range of 7W.
  • A typical deployment would most PoE devices connect to a switch.
  • For these reasons, the ESW is not burdened cost with the PoE feature which would not be used most of the time.
  • All ports are still able to PoE you can connect up to 24 devices PoE Switch 24 ports to any point in time, as long as the handset is in the title of the budget.
  • Therefore, given that these products are intended for small business and the price is an important factor, we opted for this approach.

  We do not have a product at full power on all ports in the Cisco Small Business portfolio, except in the arena of 8 channels. Within Cisco, Cisco Catalyst products support this today.

  Thanks again for the question,

  Stephanie Reaves

  Cisco Small Business

• / close the switch with the media player 12 on windows 7 32-bit o/s

  I try to use the /close switch with media player 12 on windows 7 32-bit o/s, the media player opens and plays the file but does not close after the reading of the file.

  I expect that the /close should work when used in conjunctino with the /play after reading the site--> http://support.microsoft.com/KB/241422

  Some commands I tried:

  Start/min Mplayer2.exe /play/c:\alert.wav nearby

  Start/min /play/c:\alert.wav nearby wmplayer.exe

  This same exact command is currently working on Windows XP. Appreciate any help on this.

  Thank you

  Kalyan

  Hi Kalyan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/iTCG/threads/

  I hope this helps.