Button changes only not to frame 3

Similar Questions

• value of radio button shows only not in the mysql table

  This looks like a small problem, but I can't seem to find the solution. I created a form on a web page. After the form is completed, a confirmation is sent to the person who filled out the form and a mysql table is populated with the information from the form. Everything works well except for one small thing: the value of the radio button does not appear in the table.

  Here is the form: http://www.webdevpractice.com/genoptix/CE/register.php

  Here is the table on the Web page: http://www.webdevpractice.com/genoptix/CE/admin/index.php you will see that the Contact Me column does not.

  Here insert the php code in the registration form page:

  if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "registration")) {
    $insertSQL = sprintf("INSERT INTO registrants (registrant_id, first_name, last_name, medtech_id, job_title, company, city, `state`, email, phone, contact) VALUES (%s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s)",
                         GetSQLValueString($_POST['registrant_id'], "int"),
                         GetSQLValueString($_POST['first_name'], "text"),
                         GetSQLValueString($_POST['last_name'], "text"),
                         GetSQLValueString($_POST['medtech_id'], "text"),
                         GetSQLValueString($_POST['job_title'], "text"),
                         GetSQLValueString($_POST['company'], "text"),
                         GetSQLValueString($_POST['city'], "text"),
                         GetSQLValueString($_POST['state'], "text"),
                         GetSQLValueString($_POST['email'], "text"),
                         GetSQLValueString($_POST['phone'], "text"),
                         GetSQLValueString(isset($_POST['contact']) ? "true" : "", "defined","'Y'","'N'"));
  

  I used phpMyAdmin to create the db and table. I put the field contact as follows:

  Type: ENUM

  Length/values: ', 'y '.

  Default: no

  Ranking: utf8_unicode_ci

  Can you find the problem?

  I found the problem. I don't broadcast my stupidity, but I have a time I changed the last field of contact_me contact and I forgot to download the change on one of the files (I thought I had downloaded it). In any case, thanks for responding to my message. It is good to know that altruistic GRAMPS remains!

• BlackBerry Help 10: Lock screen Image changes only not :(

  It's so boring... even when I change the wallpaper, LockScreen image stays in place. I tried installed factory reset a wallpaper but still does not change. How can I go about this pls? Or is there a way it can be changed without changing the wallpaper? Help guyz... Thank you!

  I use v10.1.0.4181 Q10. Although I had to reset to the carrier which has removed all substantive records screen + reset positions of my icons and I used a theme software to change the background. It's back to normal now.

  Thanks ViciousFerret for your effort.

• not reflecting changes only not in user created through the responsibility of sysadmin

  Hello
  
  Our Oracle Apps Version is R12.0.4
  
  We have a problem with users every time whenever the user attached to employee in HRMS modified details. HR people accustomed to change emailids in employee info a few times, so that the employee details in particular is bound to the user created by sysadmin is not getting updated with the e-mail address has changed... we do manually again by reassigning the same employee to the user, so that it's getting changed with the new email address...
  
  In fact whenever any change emailid HRMS automatically mean that change or passed on to the linked user that was created by sysadmin responsibility... This isn't the case... is it a bug or problem in our applications? Please help me on this with any solution...
  
  Thank you...

  Hello

  Our Oracle Apps Version is R12.0.4

  We have a problem with users every time whenever the user attached to employee in HRMS modified details. HR people accustomed to change emailids in employee info a few times, so that the employee details in particular is bound to the user created by sysadmin is not getting updated with the e-mail address has changed... we do manually again by reassigning the same employee to the user, so that it's getting changed with the new email address...

  In fact whenever any change emailid HRMS automatically mean that change or passed on to the linked user that was created by sysadmin responsibility... This isn't the case... is it a bug or problem in our applications? Please help me on this with any solution...

  Please see these documents.

  PERWSHRG update used Email Does not change Email on registration of the user [763484.1 ID] - for R12
  Synchronization data Email FND_USER and email HR [ID 463770.1] - for 11i data

  Thank you
  Hussein

• the Random var button works only not with the switch statement

  I have a button randomly on the erasure of the scene in. I'm testing button that fades in, because I have different URL according to the button it is on. Here is the code that I use, and which generates no errors... just does not work. I am unable to find the correct key, but do not work my switch statements. I don't know if it's one thing to syntax or another problem. Thank you!!

  var currentImage:MovieClip;

  var arrGrowing:Array = new Array (resume_mc, magazine_mc, suitcase_mc, monopoly_mc, superhero_mc, hat_mc,

  chair_mc, books_mc, lightbulb_mc);

  for (var i = 0; i < arrGrowing.length; i ++) {}

  arrGrowing [i] .alpha = 0;

  arrGrowing [i] .buttonMode = true;

  arrGrowing [i] .addEventListener (MouseEvent.CLICK, onButtonClick);

  }

  function initLoop (): void {}

  currentImage = arrGrowing [Math.floor (Math.random () * arrGrowing.length)];

  var exitTween:Tween = new Tween(currentImage,"alpha",Regular.easeOut,0,1,12,false);

  }

  function onButtonClick(e:MouseEvent):void {}

  switch (currentImage) {}

  case resumes:

  var url: String = "http://www.yahoo.com"; ""

  var req:URLRequest = new URLRequest (url);

  navigateToURL (req, "_self");

  break;
  }

  I don't see where CV refers to any thing implied by your code.  There is a resume_mc if that's what you're trying to test.

• Invisible button plays only not movieclip on turnover

  I have an invisible button that the reversal is expected to play a clip. In this movie clip, I need to play the 33 frame. However, when I use the following code it does absolutely nothing. Name of the instance of the clip is "flavorIcons".

  on {(overview)
  flavorIcons.gotoandPlay (33);
  }

  It looks like a syntax/fault typing error.  Try to use gotoAndPlay

• all the buttons work only not on the monitor source except the space bar

  I just downloaded a trial of adobe first cc 2015 but unable to do all the regular stuff in my source window. all buttons are unresponsive except the space bar (it will play the file). I can also drag the video in the timeline, but still unable to make other edits using the buttons... any ideas anyone?

  Try this:

  Restart your computer, hold down the shift + alt key while opening the first up to the Welcome screen.

• OIM11gR2: Introduce the button Edit user not to become active on change UDF

  Hello
  
  IOM 11 GR 2, claim button Edit user not active on change only UDF, it becomes active only when at least one of the STANDARD attributes is changed. Is there a solution for this problem?
  
  Thanks in advance,
  
  Published by: 983568 on 8 April 2013 22:00

  find the solution to the link below
  http://docs.Oracle.com/CD/E27559_01/Relnotes.1112/e35820/id_mgr.htm#CACIAFFE

• Buttons that do not change subtitles are turn on subtitles

  As the subject says, my blu - ray CS5 has a drop down where the buttons that are not supposed to change the subtitles change subtitles.  Until this problem is corrected, I can't send my project, so I hope someone here will know what is happening or has a workaround solution.  (If this workaround is to Blustreak Premaster or plotter, feel free to suggest because I purchashed both.)

  The pop-up menu of my project has review power and subtitle buttons off/English/french/German/Spanish subtitles.  The comment 'off' button is set to link to itself, but change the audio track to A1 (audio main without comment).  On the other hand, the comment button 'on' is set to link to itself, but change the audio track to A2, which is the commentary track.  These buttons work fine to change the audio track * BUT * they also reset the subtitle track to S1 (English), even if the buttons are on subtitle: no change in the dialog box specify the link... .

  To help in the diagnosis, I have provided two screenshots that show the pop-up menu and what it is defined on, and the timeline he manipulates so you can see the audio tracks and all the tracks of four subtitles.

  

  

  I could really use some help here, I have worked on this project for months and I really need to ship it.

  Hello

  The bugs of audio and subtitles are not fixed in CS5.5. There are some limited cases which cannot function properly, but none that still require recalled a stream of data selection and a link to another button on the same page and other cases also fail. Our "12 Tangos" tutorial shows how to fix errant orders with tracer BluStreak:

  http://rivergatesoftware.com/Tutorial-12tangos

  It has long been a practice common on almost any DVD with audio tracks or subtitles of camps to have a configuration menu, where the user can choose 5.1 audio stereo vs and to play a subtitle or not. The user is allowed to make their choice, and then back to a main menu, or to play the movie directly. It has never been possible in yet for Blu - ray.

  There are still two major flaws in the navigation code still 5.1. The worst is trying to link to another button on the same page. The command still includes the page number by mistake. The specifications of the Blu - ray indicates that the page number should not be changed, even to himself. In other words, the command button/page must only call button. The result of this error is that the button order flow is abandoned, and all the following commands are never executed.

  The second flaw is that all orders of stream still selection always specify all the parameters of control flow, including audio, subtitle, angle, and menu (IG). Because does not yet support multiple angles, or change the menu to another stream flow, and flows of given numbers are 0, which do not exist, most players ignore these errors. But it's just bad programming. And in the case of the subtitle stream selection, which is why still "no change" preference for subtitles does not work. He will always try to select the subtitle 0 that does not exist, and most of the players will play subtitle 1.

  We have offered to help Adobe in fixing these and other errors of navigation still Blu - ray, including reading the chapter and many others, but so far they have not shown an interest in working with us.

  Kind regards

  Larry Applegate

  Rivergate Software Inc..

• When I put a poster on my calendar frame, why this change does not appear in my "palette."

  I figured out you can drag and drop only a poster frame on the placeholder in the menu, but this process needs to be automated should it not?  When you set a poster frame, this image should not represent this scenario in the menu?

  Make sure that you have selected the marker for the first chapter of the timeline when you set the poster frame.  This assumes that the button links to the chapter in the timeline.

• Change button color doesn't change is not in the State

  I'm learning how to use flash CS5.5 and I am unable to continue a lesson because my Edit button seems to not work properly.

  -When I double click or right click and click on change my button, I go to the symbol-editing screen, where I can see the basic button indicates "upward, more bottom, & Hit" but when I try to change the button's appearance in each State of the color and any kind of editing done to it is not It is red in the picture-key 'up' and when I try to change to gray in the keyframe "over" there is red.

  -J' found that a double click on the button in the Edit screen goes into another screen labeled 'symbol 1' edition and I can change the color of the button, but all changes in this screen are ineffectuall to the actuall on the main screen button.

  I don't know what the problem is with him, or if I'm missing something, I tried in the two script action 2 and 3 and both have the same results.

  Looks like you have a different symbol inside the key.  Try just of drawing in the chassis and see if that helps.

• Boolean button changes color briefly when you press

  Hi, I use Boolean button is a toggle, so I want only text changes when pressed without changing the appearance of the button.

  I am able to change the color on properties to match the color Off (I use the silver palette so normally is yellow), but when the Boolean button changes to, there is a brief change of color again. Is there a way I can get rid of him?

  In fact, some of my buttons Flash black while others are flashing yellow. I have no idea where this is defined.

  Thak you very much.

  There are 4 colors for Boolean values ON and OFF more past of WE OFF and goes off to WE

  You see only the color of transition when you have the locking set of 'locking' Mech by releasing

  Set on "lock when you press on" and you will not see the colors of transition

  You can set all 4 colors by using the Colors property [4]

  Colors [4] property

  Short name: color [4]

  Request: Development of database system

  Class: Boolean properties

  Usage: Create a property.

  Table of up to 4 (foreground color, background color) pairs, where foreground color is the color of Boolean control foreground and background color is the background color of the Boolean control. Color pairs include False, True, true to False and false to True.

  You can set the color of the object of the façade by plugging in a hexadecimal number with the form RRGGBB or by plugging in the constant color box in the property.

  This property is similar to the option of colors on the page of the appearance of the Boolean properties dialog box.

  If the Boolean control has four (foreground color, background color) pairs for four States, this property always returns an array of four (foreground color), background color pairs during playback. When you write, you can pass an array of length 1, 2 or 4. If you pass in a single element, this property uses the value of the element for all four States. If you pass in two elements, this property uses the first value of the element to false and true false States. Similarly, this property uses the second element for the real and the fake in real States.

  If the Boolean control has one pair (foreground color, background color) for all four States, this property returns an array of pair (foreground color, background color) during playback, and uses the first element of the array when writing. You cannot change a Boolean control with (foreground color, background color) pair to a Boolean control with multiple (foreground color, background color) pairs.

  This property uses only the True to False and False to True States when you set the Boolean control to latch or switch when released. You can get and set these (foreground color, background color) pairs even if you do not have the control latch or switch value when released. they are not used.

  Because this property does not change the Boolean control data, you can set it at any time.

  You can use this property to Boolean control on the Classic, Expresspallets, modernand silver . You cannot use this property for Boolean controls in the System palette.

• modelsupport2.dll changes do not take effect

  Current enforcement TestStand 4.0 and LabWindows/CVI 9.0.1.

  Followed the instructions by http://digital.ni.com/public.nsf/allkb/A6D0EF1F4FE5EC94862570AE000CE374 to change my numbers taken test as based treatment model for batch not zero.  Also changed paralleluutdlg.c to increase the MAX_NUM_TEST_SOCKETS_VISIBLE (used 5) 6.

  The modelsupport2.dll compiled successfully, but the changes do not occur when I run my movie file using the batch processing model; for example, intakes test always starts from 0 instead of 1, and the number of visible sockets is 5 and not 6.

  I checked the configured search directories and directory of user components (containing my modified files) ahead of the default directory of the components OR as you wish.

  I missed a mandatory step here?

  Thank you!

  Hi George,.

  Section of the knowledge base that you are talking about is for the parallel model, not the model of batch processing. However, if you open the batchuutdlg.c and search for the same test line as described in the KB and add '+ 1', it should work. I have confirmed that it works on my end... just to make sure it's clear, this only changes the dialog box and will not change the numbering in the process template. This numbering being modified requires a much broader effort.

  Regarding change of MAX_NUM_TEST_SOCKETS_VISIBLE 6, I did it too and it shows 6 visible lots in the dialog box. Please do not forget that you just need to replace the number without changing the spacing on the line. You will also need to go in Configure-> model Options and change the number of Sockets of Test 6 to ensure that you see the 6 visible lots. This change will cause the window to expand on the 'Go' and 'Stop' buttons then it should be more changes down these buttons. I hope this helps answer your question!

  Kind regards
  Jackie

• Windows Explorer button shows only libraries

  A few days in a new pc with new to me Windows 7 and the Windows Explorer button suddenly only shows 'Libraries' records and files recently viewed. How do I show the full c: / drive once again, with my Photos, etc., and usb drive E when you use)?

  1. first of all, you will need to open Windows Explorer shortcut properties. If you want to change the folder target of the shortcut in Explorer Windows that is pinned to the taskbar in Windows 7, press the 'SHIFT' key and right-click on the icon in the taskbar. It will open the Windows XP/Vista old style context menu where you should select the option "Properties".

  Alternatively, you can right-click on the icon that will show the jumplist. Now, even once with the right button on the entry of "Windows Explorer" presents in the jumplist and select the properties option:

  For the other shortcuts in Windows Explorer as a shortcut in all programs menu or in the office, you do not have to press the SHIFT key. Just right click on the shortcut and select Properties.

  2 once you open the properties of the shortcut, you will see %windir%\explorer.exe written text in the targettext box. You just need to change this text string to customize the destination for the Windows Explorer shortcut folder.

  To open the my computer when you click on the Windows Explorer shortcut, just add an blank space, and double quotes ("'") at the end of the text in the text box target as shown in the following screenshot:

  

  If the entire text string would become %windir%\explorer.exe ""

  That's all. Now whenever you click on the Windows Explorer shortcut, it will open the my computer window instead of displaying the default libraries.

  3 if you want to set the target to a drive or folder, do not add double quotes. Just add the path to the end. By example, if you want to open the C: drive on the target%windir%\explorer.exe C: text string or if you want to open a folder e.g. D:\Setup, then set the text string target on %windir%\explorer.exe D:\Setup

  You can see its very simple and easy to change the shortcut to Windows Explorer startup folder in Windows 7.

  NOTE: You can also use environment variables to change the folder target to the Documents folder, profile folder, etc. You can get the complete list of all the variables of environment here.

  PS: If you want to restore the functionality of Windows Explorer shortcut and want to open libraries once again, simply remove newly added text in the target text box strings and assign %windir%\explorer.exe again.

• Freezes in Windows 8, "material changes may not have been detected.

  A few days ago my laptop speakers have not worked or stopped working suddenly, although it reinstall the drivers. Last night, I installed a group of updates (not counting the 8.1) to my computer and that seemed to solve the problem of speaker but ever since then it has been freezing. First regardless of the application I have open (google chrome, my antivirus software, whatever it is) suddenly doesn't respond. Then, the entire computer freezes - the clock to stop, I can't click on anything whether or get into the Task Manager but the mouse still moves. This stage lasts 30 minutes and arrives at least once every two hours - usually, I pressed the power button to turn off, but last night I just closed the lid and went to sleep. This morning, I ran the hardware and devices Troubleshooter and received the message that "material changes may not have been detected. I don't know what to do.

  Hello, Léa,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause.

  The error message you get may be due to a service that is not running or if the race is not defined as automatic.

  You can try the steps below to check the status of service.

  1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
  2. Look for Windows Installer service.
  3. Check if it is started, if not, right click on the service and click Start.
  4. Right-click on the Windows Installer service and select Properties.
  5. In startup type, select Automatic.
  6. Then click on apply and OK.

  If the problem persists, you can follow the steps in the Microsoft article provided below and check if that helps.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.