button new design in labview

Hello

I wonder if it is possible for the button new drawing in labview. in fact, I don't want to change the functionality of the button, but I want to have the new button with new graphics. for example, I have a button with a particular image at its Center is desired (as a uniqe object).

concerning

Herea video how to achieve this.

Herea control that allows you to set the image.

Herea set of defines custom buttons (look for packages of user interface tool).

Tone

Tags: NI Software

Similar Questions

  • Embedded audio player doesn't work with Firefox in a laptop computer, but works fine on a PC. How can I fix? It started with the new design of Firefox.

    This problem apparently only occurs with the audio player built into http://www.theskepticsguide.org/ . I tried other embedded audio players from other websites and they work fine. In the Firefox installed in my laptop, no matter what I do it does not play the SGU podcast. When I try to click on the download option it says "Video cannot be read because the file is corrupted. However, I can play and download the podcast without any problem with Firefox installed in my PC, which is the exact same version that is in my laptop, so I don't really know what could be the cause.

    I remember that this was not the case before the new design of Firefox. I tried the solutions proposed on this problem before asking this question. I checked that the plugins are up-to-date. I removed all the addons and plugins, and this did not help either. Firefox reset with no luck. Also tried a fresh install of Firefox and it didn't work. I used the laptop without synchronization first, and then synchronize with no difference. Flash is up to date and there is no apparent problems there.

    Maybe it's a codec missing or damaged? I wouldn't trust codecs from sources other than Microsoft for this purpose, since Firefox tries to use Windows to read the file.

    If you decide to give up and around the native player for a plugin, these changes of settings usually work for this:

    (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

    (2) in the filter box, type or paste media and make a pause so that the list is filtered

    (3) [except XP], double-click on media.windows - media - foundation.enabled to change its value from true to false.

    (4) double click on media.directshow.enabled to change its value from true to false.

  • I can't capture scrolling screenshots of Web pages more since the new design of the tab.

    Since the launch of the new design label in Firefox, I can't use the scrolling screenshot of page in standalone clients or modules. I can capture scrolling web pages in other browsers, but Firefox is my main browser and I don't want to switch to Chrome. Is there another medium or that I have to wait for the next version of Firefox that solves this problem.

    Window capture for 2 different stand-alone clients place the box above the tabs that seems to prevent any scrolling. All the advice that can get this working again? I tried using SnagIT and PicPick Portable. Does not work for the latest version of FireFox. Thank you.

    Shows details of the system;

    Plug-ins installed

    Shockwave Flash 14.0 r0
    Shockwave Flash 13.0 r0

    and

    Adobe PDF plugin for Firefox and Netscape 11.0.07
    Adobe PDF plugin for Firefox and Netscape "9.5.5.

    Having multiple versions of a program can cause problems.

    Update your Shockwave Flash v14. http://get.Adobe.com/Shockwave/

  • With the new version of firefox I was supposed to have the new design, but is up to having the old man. How can I activate a new?

    With the new version of firefox I was supposed to have the new design, but is up to having the old man. How can I activate a new?

    Click next to the item of help on the top menu, and then deselect menu bar.

  • This may be a very stupid question, but I don't have the "button new tab" displayed on my tab bar. Can you advise me how can I enable this feature? I've searched around, but I am unable to find any ifo. on that. Thank you, Terry

    I just want to know how to get the "button new tab" displayed on the tab bar.

    Try this:

    View > toolbars > customize

    and see if the 'New tab' button is there. If this is the case, make it slide and put it anywhere you want.

  • Customization of the user interface in 4beta2: hide the button new tab

    Question

    I have another type of problem with Firefox

    Description

    I want to know how to hide the button new tab especially when (be precise)
    tabs [[overflow = "true"]
    I tried to change this code:

    .tabs-newtab-button {
    display: none
    }
    but during overflow the new tab button appears again.
    Maybe this isn't the right place for these issues, I still need a solution

    Version of Firefox

    4.0b1

    Operating system

    Windows 7

    User Agent

    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; B 1 RV:2.0) Gecko/Firefox/4.0b1 20100630

    Plugins installed

    • -Shockwave Flash 10.1 r53
    • 4.0.50524.0
    • Adobe PDF plugin for Firefox and Netscape "9.3.3.

    Try:
    #new-tab-button, .tabs-newtab-button {
    display: none;
    }
    You can also drag the new tab button in the window customize (view > toolbars > customize)

  • Is it possible to open the file on communication to labview design in labview?

    Is it possible to open the file on design Communication Labview in Labview? If yes how.

    Thank you

    No, unfortunately it is not possible.

  • Need Suggestions on design of Labview

    Hello

    I'm designing a labview interface to communicate with a system of complicated House that involves pressure, temperature regulators, valves, Renault and units under test. Finally, this House system will be installed on the production workshop where there should be minimum entries required for operators to run. A desktop PC is purchased by the end of the operation, but it is meaningless for me to leave a $7000 on a PC software that is on the manufacturing plant where there is minimal use. I intend to buy the version of Labview Suits. Also, I have a laptop of additional work to the budget as well.

    I intend to buy a license, LV interface desktop design and transfer the license to the work laptop after completion. Only the excutables LV will be installed on the desktop for the manufacturing operation.

    Please let me know if this plan might work for the purchase of a license and sensible idea excutables LV. If you have any better suggestions please share with me.

    Thank you very much

    ffl3883

    It seems ok to me, I often develop on a single laptop and deploy Setup or target use EXE on the computer. Just be aware of the possible screen resolution difference, so carefully plan your sizes of façade and test on-screen target during dev.

    You said that you will buy the dev version. costume. What are the additional modules you will not need to use? I just ask, since the Pro version is much cheaper...

  • convert the VI from the old version to the new version of Labview

    Hello

    I have a huge VI which was created on the version 6 on an old PC with Windows 95, and I am required to transfer it on a new computer with LABVIEW 8.6 or similar running on XP. Could someone guide me in the process of transfer of the code please. Moreover, it would be useful if someone can give me a link to a Web page that shows how to do the same. If necessary I can post on this message VI.

    See you soon

    Hi epoch09,

    You should be able to open it without problem.

    http://zone.NI.com/DevZone/CDA/tut/p/ID/8387

    Mike

  • Problems with the new version of LabVIEW font size...

    LabVIEW 2013, version 13.0 (64-bit), 15pt police Application.

    There it is again.  Load a new version of LabVIEW and either forget to change fonts by default or default in this case, font change does not block spread chart by default in (Tools > Options > environment > fonts).  Yes, you can use the (Drop Down Menu fonts > police dialog box > set and select the default Panel) and it will take.

    But now you have loaded your old code made too many changes to recharge under your chosen font settings, and the new 15pt font replaced many of your old 14pt font to the point that your code function entries that have been sized to 14pt are now misalligned / overlapping and it takes a long time to fix.

    Does anyone know how to reallocate the global level different fonts in your code without having to reset them manually one at a time?

    Thank you

    HLB

    Yet another reason to copy your labview.ini file and place it with every new installation...

  • My client has an operational Web site. He had me he recast in Muse. What do need me and how to publish the new design of its host/server?

    My client has an operational Web site. He had me he recast in Muse. What do need me and how to publish the new design of its host/server?

    Hi Jefffrey

    I think that your request is answered by live chat.

    Please do not hesitate to contact us again.

    Thank you

    Sanjit

  • I am trying to add a new design for a site!

    Help, please! So I'm still trying to understand exactly how dreamweaver works, but I know my way around the block at least.

    I created a site in dreamweaver and I have added to my godaddy FTP server and successfully launched and it worked perfectly!

    Long story short: I'm just recently re-designed the design of the site with new images and a new index.png from a model that I used. I'm trying to repalce design that I had with the new design here. I'm not sure what I'm doing wrong! It will not work, I tried everything!

    Please tell me what I am doing wrong:

    I created a new site and a new name and new root folder also pointed out with my new design. I deleted the old site and I even deleted the root files on my computer even the index.html file and I've connected my new site on the server remote and "put" everything there and it is leaving my site with the old design. There are more NO TRACE of this drawing on my computer.

    ALL I want is to update this site for the new design and to get rid of old, outdated one I had before. Help!

    There is always a file (with the old design) root named "index.html" in the folder on the remote server.

    This file will always be displayed when you point your browser to the site

    In other words http://www.ovtliers.com = http://www.ovtliers.com/index.html

    The new design is at http://www.ovtliers.com/index3.html

    1. Visit the remote site for index.html (old design) in the root folder and delete it.
    2. Rename "index3.html" (in DW) to 'index.html' (click Yes to update the links), upload all changed files and then test again.

  • The new design in v.29 is terrible. Why on earth would you remove the navigation buttons? How can I reinstall v.28?

    Restorer of classic theme does not solve the problem. Mozilla is usually so good at the test users, it was a real blunder.

    The buttons that are you referring?

    You can check the problems caused by a corrupt localstore.rdf file.

  • I can not open a new tab anyway... by clicking on the button new tab bar tabs, or ctrl/T or file/new tab, or by clicking on the link on the current page.

    On Windows7 Home Premium Edition, I can't get a new tab to open no matter what I try. Occasionally, if I click on a link on the current page, a second tab opens, but 99% of the time I'm stuck using the first tab for everything and using the back button. I tried ctrl/T, tab file/new, right mouse click / New tab and the new button tab in the tab to the right of the current tab bar.

    Uninstall the Ask Toolbar. It can cause this problem.

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • The button new tab does not appear. How can I activate it...?

    Just updated to the 6.0.2 o Firefox version and found that the new tab button does not appear... Please advise...

    The morphs of button tab depending on where you place it. In the tab bar, it is a large Plus sign ('+'). in an another toolbar, this is a black silhouette tab file with a white sign. If you have tabs on the top you have to be careful where you place - try the far right of the tab bar, or if you have a button close the simple tab on the far right, you can place the new tab button just to the left of the button to close the tab.

    To learn more about the changes, toolbars, including how to put them back to see items #1-10,

    You can make Firefox 6.0.2 look to Firefox 3.6. *, see numbered items 1-10 of the next topic difficulty Firefox 4.0 UI toolbar, problems (make Firefox 4.0 to 8.0, resemble 3.6). If you make changes, you must be aware of what has changed and what it takes to use changed or missing features.

    Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

Maybe you are looking for