By clicking on the file and print preview is no longer gives a preview before printing.

Similar Questions

• I can't view and print details in the Windows experience index, when I click on the display and printing of details.

  When I click on the button check printing details and it appears a message saying not able to create Details page.
  How can I solve this problem? for those who want the truth revealed open their hearts and their secrets unseal right now until the now from now who complete memories for those who are now in this House only truth will be heard from the mouth

  Hi Alex,

  Thank you for using the Microsoft answers Forum!

  From my research, I suggest you try the following steps.

  Method I - execute a System File Checker tool.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your

  password or click on continue.

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  Once the completed scan, a test to see if the problem you are experiencing is resolved

  See this link for more information about the System File Checker tool.

  http://support.Microsoft.com/default.aspx/KB/936212

  Let me know if it worked

   

  Kind regards

  Karena a: MICROSOFT SUPPORT

  ------------------------------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect two computers windows 7 for the file and printer sharing

  Original title: trying to share files and printers on two computers and seem to have a firewall problem! Windows 7 is on both computers.

  I went through the setup procedures, I think, but still actually will not connect.

  Hello

  ·        How are you trying to share files and printer through the group home or workgroup?

  ·        What is put in place procedures have you tried?

  ·        How do you know that there is a problem with the firewall?

   

  Step 1:

  Temporarily, you can try disabling the firewall on the system and check. See the article mentioned below.

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  I also suggest you to disable the security software and check if you are able to establish a connection between the two systems.

  Note: Activate the wall and fire safety software once the scans.

   

  Step 2:

  I suggest you follow the steps mentioned in the articles below.

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I click on the file and click on print, no printing occurs by using kodak esp7

  I have the ability to print when you use internet explorer, but cannot get anything it either happens on firefox.

  This printer is selected?

  See the screenshot below.

• All of a sudden, I can't open a mov.file with quicktime player. The file has had 14G I click on the file and the answer is that I can not open with qtp try other wit

  All of a sudden I can't open a file with 14 g movie mov. When I click the icon QuickTime Player the answer is to try other versions but to no help t nt.

  He opened before? Whence this file?

  Try to open this file with VLC. If she is playing, press command-I, click on Codecs and post a screenshot.

• Windows 2008 can not access the file and print is online but isn´t answer

  I am trying to connect from one server to another server located in another domain, but I got the error above.  My operating system is Windows 2008 server R2. When I try to connect to my pc (windows 7 proffesional), I can do it without problem.

  Than you for your help.

  Kind regards

  OScar

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Satellite A100 - 02 M: cannot open the local area network to share files and printer - LAN Unplugged

  I have an office of another manufacturer which was connected by a wireless network via a Belkin router for a laptop another manufacturers - both running XP.

  I have now replaced the other laptop with a laptop Toshiba Satellite A100 - 02 M under Vista Home Premium. While I can still access the Internet from both machines, I can't open the LAN to share files and printers. The laptop shows 'LAN Unplugged' all the time. Any ideas would be accepted with gratitude.

  Ray Freeman

  Hello

  I have no general solution, but I'll try to give some advice solution;
  If you want to connect laptop with LAN cable both please make sure that you use a crossover ethernet cable.
  In addition, check if the network card is properly recognized in Device Manager.

  You could try updating the LAN driver and remove the NIC in Device Manager to update the installed driver.
  After restarting again the operating system should recognize the new (Lan) device and should install it automatically.

  I also studied a bit in this forum and found a similar thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14852&MessageID=54037

  Check the proposals contained in this message.

  By the way; Microsoft provides a very useful page on Vista and how to configure the network, the file and printer sharing and troubleshooting
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

• Sharing files and printing turn off the coast

  I have a thinkpad SL510 with Win Pro installed and for some reason, the file and print sharing checkbox for the Ethernet card turns off after that I have restart or restart the computer... What you have to do to prevent this?

  Thanks Andy... in fact I found this response during a search in an another forem to Lenovo for the T60... but I appreciate it... This has been really puzzled for a while now, since I didn't know that this option was in the login to... but so far seems to have done the trick.

• Right-click on the file properties does not not work or opening

  When I right click on a file or folder and then drag the cursor to the "Properties" section, nothing happens when a click to open it.  What can I do to fix this?

  Hello

  ·        This happens with some files or all files?

  ·        What kind of file is it?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What happens when you click on the file properties? You get the error message?

  ·        You are able to access the propertied file in safe mode?

   

  Method 1:

  Step 1:

  I suggest you to check in safe mode if you are able to access properties of files. Follow the steps mentioned below to start in safe mode.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the boot menu and press ENTER.

  c. right-click on the file and check if you're able to access the properties.

  If you are able to access the properties then I suggest you do a clean boot and check. Follow step 2.

   

  Step 2:

  Perform a clean boot and see if the problem is resolved.

  Follow the steps mentioned in the article given below to configure the system to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start the normal start

  Method 2:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  e. audit % complete.

  f. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 3:

  Check in the new user account, you are able to open the file properties. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Wonder about file and printer sharing (existing home network)

  Before you start what are the risks and problems with the file for example, virus,.

   

  So should I use the Windows Wizard or the menu of Linksys to enable files and printers shared on my Inspiron 2200 and my 4600 (Desktop) dimension. I use a HP PSC 1210 all in One (Wired to desktop), pilots have been implemented on the two compositions and I use McAfee Security Center without the Protection of privacy on the two compositions. So, how do this.

   

  Do I have to install the file and printer for MS Networks sharing? What is it?

   

  Router information
  Linksys Wireless-G 2.4 GHz
  Firmware Version: v3.03.6, January 6, 2005
  Current time: Tuesday, November 6, 2007 21:57:23
  MAC address: 00:07:E9:26:4F:5 has
  Router name: WRT54G
  Host name: D3DD5G31
  Domain name: phub.net.cable.rogers.com
  Internet

  Type of configuration
  Connection type: Automatic Configuration - DHCP
  MTU: 1500

   

  Message edited by Kenster102.5 on 11/06/2007 22:28

  Message edited by Kenster102.5 on 11/06/2007 22:29

  Message edited by Kenster102.5 on 11/06/2007 22:32

  
  

• 'PC' is not set up to establish a connection on port "file and printer sharing (SMB)" with this computer - I get this after enabling access to public folders and then trying to access (another pc on the network cannot connect to this pc but see).

  • Tried to reconfigure the firewall
  • Tried to change files and printers, sharing options
  • Restarted other computers trying to connect to my public folder
  • Tried to adjust the network discovery
  • Do all computers on the network among the same workgroup
  • I can access public folders from the other computer and their content
  • Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
  • Other computers can see my computer, but can not access: error code: 0 x 80070035.

  Can't access: 'Public' and 'Users' in the title:

  -Network
  MyName-PC

  Please don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.

  Hi Katmandu774,

   

  Welcome to Microsoft Answers Forums.

  The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.

  If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to password protected sharing, and then click one of the following options:

  ·         Turn on password protected sharing

  ·         Turn off password protected sharing

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To control the level of access to the Public folder

   

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to public folder sharing, and then click one of the following options:

  ·         Turn on sharing so anyone with network access can open files

  ·         Turn on sharing so anyone with network access can open, change and create files

  ·         Turn off sharing (people logged on to this computer can still access this folder)

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, make sure you add everyone to the public folder and give the necessary permissions to access it.

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I reinstalled adobe CS6. my other macs, I had a printer named 'Adobe PDF', that I could choose that as my printer and a dialogue box came up, I named the file and the location.  I can't figure out how to get this done on my new mac.  Help

  I reinstalled adobe CS6. my other macs, I had a printer named 'Adobe PDF', that I could choose that as my printer and a dialogue box came up, I named the file and the location.  I can't figure out how to get this done on my new mac.  Help

  There are two ways to create a PDF on a Mac:

  (1) you can use the default method, which is to choose file > print. Click on the PDF menu below on the left, then click on save as PDF. This lets you name and save the PDF file using the mechanism of OS X to create PDF files.

  (2) in the same menu, you can save in Adobe PDF format. It runs a script (a little slow) that lets choose you what PDF settings file you want to use. This is the Adobe-developed mechanism that replaces the old Virtual PDF printer.

• using the '+' I'm unable to open additional tabs. If I use the file and click New tab it will open. I don't have the Ask toolbar. How can this be corrected?

  Before today, when I clicked on the '+' opens a new tab. She is no longer doing this. However, when I open the file and click on 'New tab' it opens fine. I don't have the "Ask Toolbar" as far as I know (this has been mentioned as a problem before). What can be done to fix this? Thank you.

  Can't really tell if it was useful or not. Before I had the answer, I rebooted and the problem disappeared. I appreciate the quick response and it will keep on file for future reference if the problem happens again.

• Right mouse click when the file name of MS Explorer results saying that he has encountered a problem and will stop, and it stops quickly.

  Right mouse click when the file name of MS Explorer results saying that he has encountered a problem and will stop, and it stops quickly.

  Right click issues are usually caused by a third-party software that put an entry in the context menu. You can solve this with the free ShellExView.

  http://www.nirsoft.net/utils/shexview.html - ShellExView

  Make a right-click is slow or weird behavior caused by context menus management - http://windowsxp.mvps.org/slowrightclick.htm
  Manage the entries in context menu for folders, readers, and the Namespace objects - http://windowsxp.mvps.org/context_folders.htm MS - MVP - Elephant Boy computers - Don ' t Panic!

• Error 0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  Original title: "home network".

  0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  That's what I get on my ThinkPad when I try to do the networking. I placed all the parameters correctly: all 3 of my computers are set the same. 2 workstations work perfectly. They can even see the laptop but not to open all files. The laptop can, open same network t itself file. But he can see the whole of the network (including a printer, is told by the way). I, ve gone through all parameters twice. I've even set the C drives to share via the menus of context on each computer. I have visited many forums with none even come close to this problem (they all will tell you how to set the network parameters or they get very technical and over my head).

  I tried with & without a firewall.

  No password.

  I use a wired network.

  Laptop & 1 desktop computer running vista - 1 desktop computer running xp.

  They have all the latest service packs ms & udates.

  Any help will be appreciated.

  These files can be opened by norton or lenovo network setting apps. The settings do not work only in the application of network of vista. Nor can I work norton or lenovo from other computers.

  PS how can I ensure these settings effect may just lan and do not extend to the internet?

  Thank you bb

  I tried new drivers & returned through sharing & permissions, according to Jack, but he was not good. At the level of experience of my computer I can miss something obvious, but I doubt it because I've been very careful in following the instructions. I am experencing other problems with this laptop as well and I'll just get all. I am planing to get back anyway, that's why I needed network. I wanted to Exchange files over the network to avoid having to ' wait & swap "usb drives. Thanks anyway. Thank you BB bb