By pressing SCAN on display gives the error message, NO FOUND COMPUTER.

Similar Questions

• Whenever I try to connect to the internet, it gives the error message 651 windows 7

  Original title - windows 7 651 error

  I recently installed windows 7 and I use a broadband connection... Whenever I try to connect to the internet, it gives the error message 651 while I had no problem with this broadband connection in windows 8.1... How to fix this error, please help me...

  Hi Alexandra,.

  Please contact Microsoft Community.

  • You use a wired connection or wireless?

  Method 1: I suggest you use the resolution of the problems of the article below Internet connection and check if it helps.

  In Windows network connection issues

  https://support.Microsoft.com/en-us/KB/313242

  Method 2: Try disabling your antivirus software and then try to connect again and check if the problem persists or not.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

   

• I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message

  I used a password reset disk to access the Password Wizard, whenever I have propose a new password, it gives the error message "" an error occurred while the wizard attempted to set the password for this user account". I can't pass this screen and am virtually blocked the computer phone iam trying to access. What can I do? It comes to Windowns 7 Home Premium

  This probably means that your password disk drive is not up-to-date. Here are the other options built into Windows to help you get out of this situation:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• 8600 premium print and then gives the error message that it cannot print the document that it just printed.

  It isn't really a problem, just a nuisance.

  Last week I printed several documents from PDF files and print documents.  Once printing has been completed, an error message would be displayed on my laptop that the printer cannot print the document.  I've ignored the warnings and continued, and then the printer would print the document again.  I found that if I clicked on the error message, printing in double stop.

  Since then, whenever I don't print from any program (MS Office, Firefox, Chrome, IE, etc), I still get the same message if the end of the print document.

  Just a nuisance, but if I forgot to point out the error, the doc print again without error message after the second printiing...

  I noticed that the queue, regardless of the size of the document, always freezes on the last page to print before closing.

  I turned and turn it back on and reset the connection to a static IP address for the printer wireless...

  Hello DRS1966,

  Yes, I can understand the frustration of getting an error once printed of your document. I'm glad that's not interfering with your documents but would like to try and get rid of it. Please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if it detects errors, or that it cures the problem. I'll watch for your reply.

  Thank you

• After that upgrade to 9.01 startup of firefox gives the error message mozcrt19.dll not found.

  After the upgrade to firefox 9.01 with windows xp, I get every time firefox tries to throw the error message "this application has failed to start because MOZCRT19.dll is not found. Reinstalling the application may fix this problem.

  Well, reinstalling does not fix this problem!

  I even uninstalled firefox, deleted all files with the hint of mozilla or firefox on his behalf and did the same with the registry, reinstalled firefox 9.01 but still get the same result.

  If you use ZoneAlarm Extreme Security then disable virtualization and reinstall Firefox.

  See for a similar problem caused by ZoneAlarm:

  • [880050/questions/880050]
  • http://KB.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update

• Web ADI - log reverse which gives the error message - 'enter a valid reversal period ".

  When try to reverse the journal through WEB ADI entries get the error message following 'enter a valid recovery period. "

  Kindly let me know how to solve.

  PL activate trace according to MOS 817023.1 Doc - a SR was opened with support?

• Payment option 'Free' web form that gives the error message

  Hello

  On this page http://www.sedonamagoretreat.org/volunteer-retreat-test-page , please see the form at the bottom of the page. The possibility to pay with a credit card works fine. But if I select 'Free' payment option and click the button send, I get the ERROR message: an error has occurred. Gift certificates are redeemable only through the online store.

  I built this form using some of these http://demo.businesscatalyst.com/booking-multiple-seats

  I followed the advice on this page http://forums.adobe.com/thread/1100196 by adding the gift button but still does not work.

  Thanks for your help!

  Linda

  I solved myself, with the help of technical support, so I'm writing this for anyone who attempts to do the same configuration.

  By technical support to Business Catalyst:

  "I checked the problem you reported, to confirm you with the same.

  You can use the free = 10 mode of payment for your basket, where any good good or discount reduced the amount to zero.

  I understand the option you're looking for, however, it is not possible to achieve the same in British Colombia, using the free payment method. Try a few adaptations, unfortunately, HTML / CSS / JavaScript and the location of related implementation issues beyond our support boundaries. However, you would like this post on our support forums, where a member of our helpful community may be able to help - http://forums.adobe.com/community/business_catalyst"

  So instead of using the payment option 'Free', I have used "Cash." It is not an ideal setup, but it works for now.

  Be sure to use

  wrapped around the fields related to payments and insert the following script to hide the payment fields if they choose payment by credit card:

• Impossible to reinstall Lightroom 6 retail DVD.  Gives the error message "Windows Vista not supported."

  After a horrible experience with the upgrade of Windows 10, I re-installed Windows 7 Pro and had to reinstall all my programs.  When I try to install the retail DVD of Lightroom 6 version, I got and error message that Lightroom does not support the Vista operating system.  This is NOT Vista; It is Windows 7 Pro x 64 SP with installed updates.  Installation stops there and will not continue!  I then reinstalled my old version of Lightroom 5.2 (who has updated to 5.7) without problem.  How can I bypass the installation process that incorrectly detects Vista?

  Thanks for any help you might be able to give me.  I really miss my 6 LR!

  Hello

  Try to force ambient light Setup to run in Windows 7 mode:

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

  This link can also help: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported

• Thunderbird won't start, gives the error message of compatibility

  When I try to run Thunderbird, I get an error message that says:

  "Error: platform version ' 38.4.0 ' is not compatible with
  minVersion > = 38.3.0
  maxVersion < = 38.3.0

  The version of the file that is listed is 38.3.0.5749 and the version of the product is 38.3.0; last updated 10/5, apparently.

  reinstall everything, your mail and the setting will not be affected and any other file is corrupted will be if all goes well replaced.

• 36.0.4 Firefox has stopped working with flickr. (Works w/IE) When you click on a photo, I give the error message: something has gone wrong. Click 'OK' to reload. .

  Following the recent update for Firefox 36.0.4, I can not use Flickr, either when you are connected or if not logged into Flickr. When I click a picture, instead of having the enlarged image, I get the following error message: "error - something went wrong. Click 'OK' to reload the page, or 'Cancel' If you want to continue browsing the page (you won't be able to perform all the actions, however). »

  The problem does not occur with Internet Explorer.

  I'm on Windows 7 Home Premium, but there is no change to the computer before the problem with Firefox and Flickr started.

  I'm glad to hear it works now as expected. If he have more questions please do after return and will be happy to help you.

• Just bought a new all in one printer but when I try to scan something I get the error message "JIT debugging of unhandled exception message."

  original title: help needed please...

  I recently bought a new all in one printer and now whenever I try to import something I scanned into my computer in the graphics of MY CRAFT STUDIO program all that I get, it's the exception message not support JIT debugging.

  I tried to disable in Internet Options, but he did not make a difference.  Any help will be greatly appreciated

  Contact support or ask in the forums of the LIM printer software or seller.

• magnify.exe gives the error message that a referral was returned by the server.

  System is working properly. Nothing new installed for months.  09/12/2014 windows update downloaded around 10:30, while the system was in mode sleep. Around 03:00 12/10/2014, installed updates and the system has restarted at the login screen. When I took the box about 12:00 screen 10/12/2014 was obscured and doesn't wake up. Turned off and rebooted. Blind necessary loupe for most c.p activities.. When you try to use the exact error message magnifying glass appears

  C:\Windows\system32\magnify.exe

  a referral was returned by the server.

  A tried a reboot cleanboot and a restart to safe mode. lens error persists in both cases.

  Need help I have a magnifying glass.

  Remove KB3004394 from Windows updates and reboot. It has caused many issues, including yours.
  
   

• creation of DVD Windows guard give the error message indicating the error occurred when burning the dvd

  I'm trying to use creation of Windows DVD to burn a DVD. The program starts in mode "coding" and after a minute or two, I get an error message informing me "cannot create an error has occurred when burning the DVD DVD»  Can someone tell me what to do?

  "DVD burning speed. This option allows you to select the speed to burn your DVD. The default value is the fastest growing. Some DVD burners do not burn at full speed if you use certain types of DVD. If you have a problem burning a disc, try selecting medium or slow. "Also try another brand of blank DVD.

  Change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-AU/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  See if there is another program interfering.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

• Adobe Application Manager installation gives the error message

  I tried to install the Application Manager and an error message came telling me that it was a forgery. Not a real product from Adobe. I downloaded 3 programs before with no problems. Has something changed that I missed. Any help would be appreciated.

  Carlton

  The steps in this link will solve the problem http://helpx.adobe.com/creative-suite/kb/genuine-verification-failure.html

• Windows xp not loading, which gives an error message not found rpcrt4.dll

  When I try to restart the computer, it acts like it is trying to load windows then gives me an error message as rpcrt4.dll is not found. Could someone give me instructions step by step on how to fix this?
  Thank you so :)

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        Are you able to start on the system?

  (Remote procedure call Runtime) Rpcrt4.dll errors are caused by situations that lead to the removal or corruption of theDLL filerpcrt4.

  Method 1:

  If you are not able to boot to the desktop then, I would say to start in safe mode, and then do a SFC scan.

  Step 1: Boot in safe mode.

  Follow the steps mentioned below to start in safe mode.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  Step 2: Run a SFC scan.

  Of file system (CFS) when checking that all the Windows XP system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  e. audit % complete.

  f. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2:

  If the problem started recently, so, I suggest you do a system restore and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.