By specifying the file name for FTP out OSB transport

Similar Questions

• By specifying the host name for the database during installation

  I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.
  
  Published by: user4928701 on July 8, 2011 23:15

  user4928701 wrote:
  I installed the database 11g r2 as a Server Desktop, anywhere during the installation it asked me to review or change the host name. It is automatically used as the host name "localhost" and wrote in listener.ora, so no other machine on the network is able to use it. Only, it connects since within the same machine. Please help how to specify the host name during installation.

  Published by: user4928701 on July 8, 2011 23:15

  lsnrctl stop

  move/rename listener.ora to new/other file name

  lsnrctl start

• Specifying the user name for the collection of statistics of servers windows performance monitor?

  When using load OATS tests collect statistics of servers Windows (perfmon stats), the load test server runs under the user Id must be a member of the monitoring group of the Performance on all Windows servers, I'm watching. I have a user ID standard I use for this type of surveillance. It is automatically configured on all servers in our company. Where can I specify this user ID and password in OATS load tests?
  
  The only reference I can find in the documentation says to change the user ID and un_mot_de_passe in the Oracle Load Test Agent Serivce. I don't think that's what I want. And there is no installed service named 'Oracle Load Testing Service Agent' on my server in any case.
  
  Thanks for the help!

  Hello Bob
  You should have a service called Service Oracle Application Testing Suite Agent on each server running a load test agent. If this is not the case, there is a problem it somethere and you can't run a load test.
  This is the service you need to run as the specific user (go to control panel-> service-> change the service to log on under your username).

  And tell us the resultl
  See you soon
  JB

• What is the file name for a LifeCam VX6000 driver

  My LifeCam VX6000 is no longer recognized by my computer, and the application of device driver indicates that there is no driver installed.

  Please see: troubleshooting failures to find the new LifeCam hardware and download the Webcam software & helmet.

• Given the file name or path contains Unicode or DBCS characters. Retry using ASCII characters for the file name and path whatever that means? This happens when I publish an OAM

  Given the file name or path contains Unicode or DBCS characters. Retry using ASCII characters for the file name and path

  What does that mean? It happens when I try to publish an OAM for Dreamweaver.

  Also: How can I specify the onboard browser animate? It's just going as far. Are there no preference to animate it dashboard?

  BTW. Just call him edge. Seriously. You call Illustrator draw? Photoshop editing?

  No, my file name is mainContent.oam

  My project name is mainContent.an

  This error occurs when I try to import into Dreamweaver. Sorry, I was unclear about that earlier.

  I thought maybe it was because I had saved my image as a png image. So re-saved as an svg, still get the error.

  

  Should I have a setting is CC of Dreamweaver that will not? I should try this in Dreamweaver CS6? I might try that next.

  Why is this so difficult program? I know that Flash. I know that After Effects. I can work the chronology part simply awesome. He's still export I have problems.

  On a MacPro, 10.7.

  You are a person of Adobe or simply a beautiful assistance program?

• Error message: "the file names would be too long for the destination folder.

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?  I don't want to lose all the data, but there are more 2 000 files with this problem, so passing by and rename each one really isn't a viable solution.  I don't really understand how the file names were originally created/saved about a problem that is only now that I want to move them.  The disc source and destination are NTFS.  Is there a solution for this?  It is imperative that no data is lost.  Thanks for any help you can offer.

  On Wednesday, 10 April 2013, 12:16:23 + 0000, MADinIowa wrote:

  I move the files from internal hard drive to external hard drive using cut and paste.  I get a message "the file name would be too long for the destination folder.  You can shorten the file name and try again, or try a location with a shorter path. "I then gives me choices to skip or cancel.  What happens to files that are ignored?  Are they deleted?

  N ° to check that what I say is correct, create a new folder
  for the purposes of the trial and to make a copy of some files. To ensure that
  one of them has a long name (rename if necessary), and then try to copy
  These files on the external drive. When you get the message, choose
  'jump' and see what happens.

• Save the file as font size for the file name

  I have a monitor resolution of 3840 x 2160 and for some time, using 150% dpi, but I loved how everything went wrong because of that and my second monitor is a 1920 x 1200, so everything went really wrong about that. so I changed the dpi at 100% and used the color editor and the appearance to change the size of the icons and the font size. but some policies do not always change. When I save a file, the file name is really small

  and difficult to read. How can I change the size of the font for this without having to resort back to the ugly dpi of 150%.

  some other small texts which seem not to be able to change the editor are like the taskbar menu, and launch the menu properties, msconfig and options in the menu to stop (from the task bar.)

  Hello

  Sorry for the delay in responding.

  Your user profile is a collection of settings that make the computer look and work the way you want. It contains your settings for wallpapers, screensavers, wallpapers, pointer preferences, settings of the sound and other features. User profiles ensure that your personal preferences are used whenever you log on to Windows.

  You can create a new user account and check if that helps. If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Keep us in the loop to help you further.

• Cannot find filename when looking for a part of the file name.

  I'm just trying to do a simple search.  I have a few hundred files in a number of subfolders and above I'm looking for right in the file name (in the upper right corner of the browser) and he doesn't find anything.  This is getting very, very frustrating.  It seems to randomly find some files... but no more.

  Is there some settiing I need to change?  What is the problem?

  Well - I thought of her.  Despite light in several places that the 7 search automatically applies a generic search at both ends of your criteria, is not.  So, let's say that I was looking for the file name "aaaxyzbbb.txt"... the search for "xyz" found nothing.  But "* xyz" found what I was looking for...

• Error: The file size for all drives of paging can be a little larger than the size you specified, when you open windows in Windows 7

  Original title: paging notice when open windows on mac, divide the hard disk

  I have a split hardrive on a MAC and windows, and quickbooks installed on this drive.  When I open windows, I get a notice of paging file.  -size of the paging file.  "The file size for all drives of paging can be a little larger than the specified size.  IM using Bootcamp for the windows side.  It is to show the memory almost full and I did not yet get many date in QB.  Don't know what I have to do.

  Hello

  1. have you done any software or changes to the material on the computer before this problem?

  2. it worked correctly previously?

  3. how many hard drives are in the computer?

  4. is the problem with a partition or a particular hard drive?

  Try the steps from the link.

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows7/change-the-size-of-virtual-memory

  What is virtual memory?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-virtual-memory

  Hope this information is useful.

• What is a * successful * way to search for files containing a specific word that is not the file name?

  I've seen several threads on forum Windows 7, but no successful response.  I desperately need to find documents that contain a certain word * in * the file is not part of the file name.  It was easy under Windows XP, but it seems that they removed this feature in Windows 7, and it's really causing me problems.

  So let's say the word is 'author '... I need to find all files that contain this word, even if "author" is not in the name of the file.  I've seen different "fixes" posted by MS Tech support, but none of them work.  I tried "contains:", search filters, checking the box "always search file names and content" and nothing works, even if I saved at least a dozen documents that contain that Word.  And no, I'm not he shell.  I checked and I found at least one of them just by hunting around.  I also tried the uppercase and lowercase without result.  I would like to avoid having to download the 3rd party software.

  Please help, there must be a way!

  There is also the alternative prompt BACK, requiring no download:

  Looking for content regardless of the type of file: http://www.computerhope.com/findstr.htm

  If you have never done stuff with a DOS command prompt before, then there is some learning to navigate a file system to see well.

  (Try you the term "content:" and not "contains:" right?)

• Changes in file name for the external Table

  Hello
  How can I call the dos2unix for Oracle utility?
  
  I am building an external table in a procedure where every time it is called the file names are different.
  any ideas?
  
  Thank you

  >
  You cannot call/run utility OS of Oracle with PL/SQL
  >
  Not TRUE! You can!

  DBMS_SCHEDULAR

  Concerning
  Biju

• Copy the text for the file name

  I have looked around for this but have not found much. I have a server with thousands to print sheets of the evidence and from the beginning, long before me, the files have been saved with verbal descriptive names. It would be much better if they were registered according to the number of PO. All the evidence leaves have a number of purchase order listed at roughly the same place on the sheet... is possible to copy this number of the field in the pdf file and save the file in a new folder under the file name using a script using this number?

  Thanks in advance.

  Maybe if:

  // Find645_NumberInDoc.jsx
  // http://forums.adobe.com/thread/1221811
  // regards pixxxelschubser
  
  //var destFolder, sourceFolder, files, fileType, sourceDoc;   // "your" sourceDoc is in the other part always defined as aDoc
  var destFolder, sourceFolder, files, fileType;
  var aDoc, DocName, aDocPath, aTFrame;
  var searchString = /^6\d{6}/;
  var searchString2 = /^6\d{6}_/;
  var saveOptions = new PDFSaveOptions();
  saveOptions.pDFPreset = "ProofCopy";
  
  //sourceFolder = Folder.current;
  sourceFolder = Folder.selectDialog();
  if ( sourceFolder != null )
  {
      files = new Array();
      fileType = "*.ai";
      files = sourceFolder.getFiles( fileType );
      if ( files.length > 0 )
      {
          destFolder = sourceFolder;
          //for ( f = 0; f < files.length; f++ )
          for ( f = 0; f < 4; f++ )   // --------------- only 4 files for your testing
          {
              aDoc = app.open(files[f]);
  
              //alert(aDoc + " opened");
              // --------------- now was opened a document
              // --------------- and here should be the rest
              DocName = aDoc.name;
              aDocPath = aDoc.path.fsName;
              aTFrame = aDoc.textFrames;
              for (i=aTFrame.length-1; i>=0; i--) {
                  contentString = aTFrame[i].textRange.contents;
                  result = contentString.match (searchString);
                  DocName = DocName.replace (searchString2,'');
                  if (result) {
                      var SaveName = aDocPath + "/" + result + "_" + DocName;
                      SaveName = SaveName.replace(/\.ai$/,'.pdf');
                      i=0;
                      }
                  }
  
              if (result) {
                  alert("SaveName: "+SaveName);   // --------------- only for your test
                  aDoc.saveAs( new File(SaveName), saveOptions );
                  // --------------- now close the active Document and go to the next in the loop
                  aDoc.close (SaveOptions.DONOTSAVECHANGES);
                  } else {
                      alert ("No match found - document remains open")
                      }
  
  }
  }
  }
  

• How to save an email in .eml format and customize the name of the file, for example the file name will be ' date, time, sender, title "?

  It would be fantastic if when save my emails on my computer the file name can be customized to be something different than just the title of the message. As I suggested in the question, if it could be set up to be "date, time, sender, title" that would be great, much assistance during the passage of a .eml files between colleagues, or just simply organize your emails into folders. Is this possible and if yes, how does one?

  Install ImportExportTools then adjust the Options (see photo).

  http://chrisramsden.vfast.co.UK/3_How_to_install_Add-ons_in_Thunderbird.html

• The file names changed in wingdings, including the file extension and I can't delete, change them, open, etc. Here are the pictures.

  Have (had) a file with multiple files it contains with pictures in each file.  A week ago the pictures were there.  Now, the names are replaced by wingdings as names and file extensions.  When I try to open it, it is not accessible and that the file name, directory name or volume label syntax is incorrect.  When I try to delete it, it says that the file name you specified is invalid or too long and specify a different name.  When I try to rename it, it tells me that if I change the file name extension, the file may become unusable.  If I try to change anyway, it says I've specified file name is not valid or too long.  Only tried for the name 1.  I did a restore in the case where a program interfered with that.  However, nothing has changed.  All of the suggestions.

  You can download and try to delete the file Unlocker http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtmlwilh.  Although it is not designed for this particular circumstance, it may very well work in all cases, as it has been very successful in a wide variety of situations are not specifically highlighted in the directions (where do not work the normal Vista options).  NOTE: Some antivirus flag programs this program as a malware, but it is a 'false positive' and is safe to use perferctly.  My own software to flag, but several other well-known software products it clean and the warning is included in the documentation of the program.

  I wish there was a way to save the images, but at this point, it seems that the only option is to delete because you can't rename files EHF (if this option is available-I hope that work above).  Unfortunately, System Restore does not affect the files of data, so even if a program caused this, System Restore can eliminate the cause, but it would not restore the files to their previous names.

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky because they retain the files called snapshots http://windows.microsoft.com/en-AU/windows-vista/Previous-versions-of-files-frequently-asked-questions.  It can be used to recover previous versions of files that have been changed or deleted accidentally.  Here's how: http://www.microsoft.com/windows/windows-vista/features/shadow-copy.aspx.

  If you have Vista Basic or Premium of Vista, you don't have a shadow, but there is a free program for you that does essentially the same thing called Shadow Explorer: http://www.shadowexplorer.com/.  I suggest that you download and implement as soon as POSSIBLE to protect you if you accidentally delete or modify a file.  It will not help you in this instance, but it can help save the next time.

  I'm more concerned about why this has happened in the first place and prevent it from happening again.  I saw file names change before, but never of wingdings which then do not let you open, edit, delete, or rename.  We will check some of your system files: go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  If you find any these corrupted files, try to post them here.  Maybe we can replace the good files on the disc.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer about the name change (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work - but it will probably not fix your renamed files.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Titles or subtitles of the file name?

  Is it possible to automatically generate the titles or subtitles of the file name? I have a video made up of several small files and you need to insert their names under the name of a chapter, or at least as a subtitle. FCPX only supports to support the generation of TC.

  The short answer (obtuse) is not. Not in FCPX alone.

  I seriously doubt you will be interested in this procedure, but someone might be.

  You need movement (this is the only expense here), TextWrangler and a droplet of Automator (see below).

  First, gather all your files of clips in a folder.

  Drop the file on the files in the folder (the automator app/drop) that will create a text file with the names of all files in the folder. When you are prompted to save the file, you can name it and save it wherever you want.

  Gout Gets the names of files from the Finder, and they are complete paths, such as:

  / Users/fx/Desktop/txtLicenses/Aardvark Cafe readme.txt

  [You can download a copy of the 'Files in the folder' drop HERE ]

  Open a window in TextWrangler, and then drag the text file to a blank page (very cool - TextWrangler automatically opens the file with drag and drop.) [TextWrangler is FREE of Barebones.com (http://www.barebones.com/products/textwrangler/) software, everyone should have a copy! The most recent version is 5.0.2 in date 25/12/2015]

  Type the command + F to open the Find/Replace dialog box. Make sure that Grep is checked.

  To find them, use this regex:

  .*\/(.+)\.. +

  [translated: find everything up to and including the last ' / ' character, can find everything up to the last period and save it as a game (the parenthesis) and then find everything at the end of the line]

  As an alternative, use:

  \1\n

  [Translated: prints the substring and adds a newline character - it will be double space lines of text]

  In the drop-down menu with the label of 'g', save... (model - something like Remove Path and FileType) so you can find it again easily.

  The text from the above example will become:

  Aardvark Cafe readme

  [and will follow an empty line]

  [I recommend you do all your spelling at this point.] Make sure that all text is as you want it to appear in FCPX. Repair later gets a bit dicey. and generally it is a good idea to start over if you need to make changes to the text file.]

  Save the file with another file in TXT format.

  On the move:

  Create a project generator. It can be almost any length, so accept the default value of 10 seconds. You will be stretching out in FCPX in any case.

  Add: Generators > text > file

  [You can use the Inspector to Format to choose the font, size, etc. and the inspector looks for color and 3D options].

  In the Inspector of the generator, find the section, load your text file

  Set the speed to Custom

  Reset the Custom speed setting

  Publish the speed of Custom setting slider

  Save in FCPX (and create a category called subtitles)

  When you save the generator in FCPX, the file being used is hard-copied in the media for access folder. You cannot publish the setting browse generator, so all files subtitles prepared in this way are projects of "One Shot". You can throw away them once your project is completed because their utility essentially died with the FCPX project.

  In FCPX, apply the generator to the plot and develop it to adapt to the length.

  Keyframe of the lines of text to match the timing of your video. This is where double spacing will be useful because it is a real pain in simple lines of keyframe and you will need a bit of space for a step-by-step. You can, of course, import the audio portion of your story in motion, create a project for quite a long time for the entire length and key image subtitles in movement. You can export as, eventually, the subtitle project as ProRes (if you do not use 4444, then you can apply the Composite blend mode add to the layer that you use in FCPX as the background should be black.)

  If all of your clips are the same length of time, then using the subtitle generator is a snap. Set a keyframe at 0 for the appearance of the first line and in the end, the last line should appear, simply drag the speed until the last line shows control (should be at or close to 100%). The generator systematically displays a single line both throughout the progression of his 'read'

  I found that the faster is to import the audio in motion and create a Motion project, the length of the audio used for subtitles + a little extra at the end.  Listen to the audio, and for each line that you display, add a keyframe... little whatever it is. When there is a keyframe for each line, listen again and adjust keyframe values to display the line. This will leave you with linear transitions from one image to another key (and overlapping in some cases, or the appearance of lines before image real key because of "Rounding errors") - is NOT a problem! Just select 1 keyframe, type command + A to select all the keyframes, and then right-click on a keyframe and select constant on the menu drop down. This will create a step-by-step through each value and you give the * discreet * timing you have need for the text to appear at the right time.  Remove the audio track and save the project as a generator of FCPX... it is faster and easier to export a track video overlay.

  You need movement 5.1.x or better (there are serious problems with 5.0 versions and file generator.)

  I know it doesn't look like it, but this method of captioning is much easier than ANY other software of captioning I've tried in the past... NO timecode or the special formatting is required... other recommended spacing to double.

  HTH