C4780 Wireless - Apple Airport/TimeCapsule will not connect to wifi

I just bought a HP C4780 Wireless printer.   Installation via the USB port on my MacBook Pro OSX10.6 works very well.

BUT when I try to set up a wireless connection, only connected via the USB port while it fails during the installation process.  Setup program sees my network wirelessly between a couple of neighbors networks... mine is the strongest.  Yet when I hit the "continue" button to connect, I get a message... "" Network unavailable selected Wi - Fi network is not within reach of the unit.

My network has encryption - WPA_PSK works perfectly.  During the wireless installation, I got the word of network gateway ready to kick it, but do not get to the screen under the "Network Configuration" screen which is the 'Security settings' screen that would allow me to enter the password. This problem occurred on two Apple laptops on my network.

When I select another neighbor (public network), it works fine.

I called the Support technique Apple and went on my Apple Network Setup and all seems OK.  I'm at a loss as the change, etc.  I downloaded the installation and latest drivers from HP.  Any suggestion would be appreciated.

Thanks Den

I owe you a great great!

I write this, the printer prints on our discussion logs!

Thanks much for hanging in there for me!

You have made my day.   Den

Tags: HP Printers

Similar Questions

  • My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

    My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

    Not knowing what the 'followed the steps posted' have been

    The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

    The iOS device sees the network?

    Error messages?

    Other devices connect now?

    The iOS device has connected before?

    Try the following to rule out a software problem:

    -Reset the device iOS. Nothing will be lost

    Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

    ten seconds, until the Apple logo appears.

    -Power off, then back on your router

    . - Reset network settings: settings > general > reset > reset network settings

    - iOS: troubleshooting connections and Wi - Fi networks

    If your iPhone, iPad or iPod touch connects to a Wi - Fi network

    - iOS: recommended for WiFi routers and access points

    -Restore from backup. See:

    iOS: how to save

    -Restore factory settings/new iOS device.

    If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

    Shop Apple Store - Genius Bar

  • L850 satellite will not connect to Wifi

    Hi, new here.

    I have a Toshiba L850 which does not connect to wifi,
    Many other devices in the House and the L850 was last week.

    You can see my router but will not connect.
    It is the 'limited access' connection, but not more.
    Said troubleshooting couldn't identify the problem.

    When I try and access the Device Manager, I get a "Explorer.EXE" the specified service does not exist as an installed service?

    Help.

    Paul.

    > He sees my router but will not connect.

    I guess that your router is secured by encryption (WEP or WPA / WPA2)
    Test WiFi connection without the use of WLan encryption settings.
    Turn off in the router settings and test the connectivity.

    Of course you need to do that just for test purposes because it s not advised to use the unsecured WiFi.

    Where you have no problem to connect the laptop to 'open' WLan, I recommend changing the encryption type.

  • iPod touch will not connect to wifi, I have tried everything!

    I used this touch iPod for over a year, and all of a sudden, it does not connect to wifi. I type the correct password, but he responds with "wrong password". I checked since then with several computers apple and iPod touch on the connection and that's fine. I even had these devices 'forget' the network and reconnect without any problem. I also had new devices to connect to the same wifi signal. I know that's not the router. I reset the network settings, reset the content and settings. I tried to restore then connected to iTunes and told to disable Find My first iPhone, but should not be my apple ID password. When you are connected to iTunes I put the iPod into recovery mode (connector pointing to iTunes screen show) and reset to factory settings and it won't always connect to the wifi. I'm looking for ways to solve this problem all over the internet and I'm out of ideas. The iPod is updated to the current 9.1 iOS. Someone at - it else I can try?

    It connects to other networks?

  • phone will not connect to WiFi

    Hi, my phone is not connecting to WiFi
    It was fine to start with and now it does not work. I tested my WiFi with others and they all get the signal and excellent connectivity.
    My z2 is either stuck in step "obtaining the IP address" or telling me he avoided a bad connection, despite the fact that I have this option disabled.
    I tried turning everything market, I tried forgetting the network and reconnect. I tried to unplug my swr10 smartband I read another post suggested that it caused problems.
    Nothing works. It will be not just to connect to my WiFi at home.
    I read a post suggesting the firmware requires a downgrade but I'm not technical interest and I'm afraid to try because it is a new phone and I don't want to void the warranty.
    Someone at - it ideas?

    I think that I have solved it without going through the firmware downgrade. I went to advanced, disabled wifi wifi optimization. Then he returned, and then rebooted the phone. WiFi has been the connection perfectly for this, but as I do not understand the phones I can't offer an explanation as to why! It has been working well for 3 days now. I'll keep it under control, but it is worth a try for someone else in the same situation. I also have a colleague with a z1 which must have WiFi optimization disabled permanently to run WiFi, once again, don't know why but yet once worth a try.

  • Printer will not connect via WIFI

    I'm continually offered an update for my CANON MG3250 printer, I've now had 8 in the past two months, and all were successful. Now my printer doesn't work! that is, it does not connect via WIFI, but will work on cable? All ideas/solutions please.

    Hello Nigel,

    Thank you for your response.

    I'm sorry for the late reply.

    I appreciate your time.

    I suggest you to refer to this article and check.
    Reference:
    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

    Please keep us updated.

    Thank you

  • Satellite Pro L300 will not connect to Wifi after hibernation

    Hello

    can someone there help me please?
    I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

    The only way to do it is to restart the pc.

    Any suggestions?

    Hello!

    I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

    In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
    http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, you run the factory settings or you have installed a different version of Windows?

    Good bye

  • Apple TV 4 is not connect to wifi when return from sleep mode

    When I turn on my Apple TV 4 is not to connect to any wifi NET. If I search for it, it does not appear. However if I take the Apple TV, it is already connected. It's a little bother doing this several times...

    I'm afraid that there are already several discussions on this problem. Search for 'sleep' and 'network' or 'WiFi '. But it doesn't seem to be a solution. It seems to have started with tvOS 9.2, which I assume you have. And it affects all ATV 4, so it's something to do with your ATV settings or the configuration of the network, but I don't know what it is. Please report it to Apple to the https://www.apple.com/feedback/appletv.html . We hope it will be fixed with an update tvOS.

  • iPhone will not connect to WiFi

    I have an iPhone running iOS 10 6. Since I have updated to iOS 10, I had problems connecting to WiFi. It happened the first time I've updated and I read that it could be some issues with the latest iOS, therefore, some recommendations to restore the iPhone, I did and it set for a few days, but once again, the issue is back.

    When I go into WiFi mid settings it does not recognize my WiFi network, but as he said 'safety recommendation' when I hit I got a message that says "low security, WEP is not considered as safe. Configure your router to use WPA2-Personal (AES) security type for this network"

    This message never came until it again once I have updated to iOS.

    Any thoughts?

    Thanks in advance!

    Hello

    Follow the steps here:

    Apple recommends the parameters of the Wi - Fi routers and access points are detailed here:

  • iPhone will not connect on wifi

    my iphone 6 does not connect to the app store without wifi, I tried many things even a restore of the network, and nothing works. What can I do else?

    Try these steps If you cannot connect to a cellular or cell - data Apple Support Network

  • Airport Express does not connect to WiFi!

    My Airport Express has lost its connection to the WiFi and cannot reconnect, keeps flashing yellow!

    It is only used to stream music from my iPad and not connected via ethernet. Its working well for 2 years until he lost the connection to my iPad because I took the iPad out of range of WiFi. Now, I can't get the the airport to connect to the WiFi again.

    I tried to reset button Reset 20 sec, also tried turning setting turned off and now the reset button for a maneuver on once again, however, does not. Any ideas?

    Gorm.

    Hello

    There may be a firmware update available.

    Open the AirPort Utility application located in HD > Applications > utilities , then click on the AirPort Express .

    If an update is available, you must do.

  • MacBook air will not connect to wifi at all the

    so my air was bought last year (June 3, 2015, to be exact) and the other to have me recheck everythings password a few times was fine, but today the wireless connection just stopped working and I have no idea why? I called my service provider and they have implemented a new wifi which worked for about 3 seconds before he told me that I could not connect again. my password is correct, but its mainly telling me connection timeout when I try to connect. its gives me the message "network could not be connected to.

    When I run Network Diagnostics told me that my information is incorrect, that is not true... its becoming very stressful for me given that 90% of my school work relies on my computer with internet.

    Ive tried everything say other issues, Ive tried to go into the advanced settings, ive tried removing all my other saved networks, ive tried to restart, ive tried to restart my router and nothing works. I need this problem really soon otherwise im going to be screwed come the time to write my English book.

    So MUCH for some reason any it plugged into his own again?

  • HP2504 printer will not connect to Wifi

    Install hp 2540printer out of box and put in the ink. IM it works with a mini iPad 2 and one iphone 4S.
    Bought this printer because it is advertised for use with mobile phones and tablets. I downloaded the app eprint and tried to connect to BT Voyager router. Not connecting not can't find the printer message shown

    Hello ellenkev,

    Welcome to the Forums of HP Support!

    I see that you are trying to configure a Deskjet 2540 to work with a couple of Apple devices. This printer is the best Setup on a network with the printing software and a computer, with that said, it can also be done with an iPad.

    Follow the steps I gave here: Re: 2542 Hp.

    Good luck.

  • My accounts on my laptop Windows 8 will not connect to wifi.

    On two of my accounts, she claims that my wifi is limited, although it works well. On a user account I just do well, the wifi works very well and does not say it is limited. Anyone have any suggestions on how to fix this?

    The accounts would be microsoft accounts. I actually received an error message wifi has shown to be "limited." No, I did not any changes to the computer before that happens.
    Right now, the accounts have connected to wifi without problem, without doing me anything. Thank you for your answer to help me solve my problem and if the problem comes back, I will return to these methods to see if one of them solve the problem. Thank you.

  • IPad Mini will not connect to WiFi

    My IPad Mini does not connect to my WiFi at home. All other devices in the House are connected correctly. It seems that my IPad Mini or the router. I was working well until that Friday. I have reset the router and the IPad Mini, forgotten network, rebooted both, and nothing seems to work. Any further suggestions?

    I suggest to do a hard reset (hold home and power button at the same time) If you have not already tried it. That's worked for me before when nothing else has.

Maybe you are looking for

  • Laptop Toshiba Satellite, could not find the product

    I get a Toshiba laptop, it is an old laptop, but I like it.S1700-500, said the mark on the bottom of the laptop.Model No.: ps170e-000ux-g3 It has a CPU celeron 700 MHz, 64 + 64 M SD RAM and so on. I have 3 question, if anyone can answer me! 1. where

  • Error: using a bow instead of a refnum

    Hi, I have a basic question. I plugged the 2 terminals of the same type (e/s FPGA), however, I get an error (I have attached a screenshot). The source is an FPGA of IO from a node and the sink came FPGA of e/s of a FPGA Read/Write.vi. The terminals a

  • Why my event structure reacts to an event of "change value"?

    Hello I created a VI with 2 while loops and structure 1 integrated event. The first while loop creates a square wave and the value of the pass signal periodically - this event is registered by a property node and also shown on an indicator. I've link

  • Upgrade to Windows 10 and return to Windows 7 Pro

    I upgrade my Windows 7 Pro to Windows 10, I went back to Windows 7 Pro. My question is... After months of July 2016, I have to buy a new key of windows if I decide to go back to windows 10 on my windows 7 pc pro? I downloaded an iso file of windows f

  • Win7 Professional - please specify 'Note' (Virtual PC Download Web page)

    Need to understand exactly with the phrase 'Note' (the bottom line) I've tried versions French and Dutch on this page, but I do not understand the exact meaning. My concern is that in order to use an all-in-one device HP psc750 works perfectly on Win