Cable HDMI between HP g6 and HDTV cause an overheating and stop?

Similar Questions

• Help with connecting cable HDMI = two blank screens and no way to choose the mirror option

  I'm not too familiar with the HDMI from my computer cable portable gateway to screen TV flat emerson. I plugged in the cable and accidentally clicked on the option to show only the monitor 2. Now, the screen is blank when the cable is connected. Would not be so bad if it would work on the TV... more.Unfortunately which is not the case. Now I have two screens blank when the cable is plugged :( I tried changing the settings, but it won't let me unless the cable is apparently? Help, please! SO FRUSTRATED

  Hi Gavsmomma,

  I suggest you to update the video graphics driver and check if it helps.

  Updated a hardware driver that is not working properly

• Transferred between Skype PC and Mac invisible files

  Yesterday, I started having problems with Mac of Skype to Skype PC file transfer. File transfer will start immediately and shows full in my e-mail, but never appears in my e-mail contacts. Now, today, it does not work the other way, he tried to send me a file but it does not appear in my mail service. Normal messaging and voice calls work between us, but are not transfers of files.

  We are both updated to the latest version of Skype and have also rebooted and tried several times between the reboots and stops of Skype.

  Any ideas?

  It's working now. I turned automatically accept it files incoming and restarted again. Then all file transfers that we had tried started.

• No signal between Pavilion dv4 and TV with HDMI cable

  Hello

  I have a Pavilion dv4 and a Samsung Smart TV. Two days ago, I was enjoying happily successful between the two with a connection cable HDMI. Now, the connection no signal. Here are some facts:

  -The correct TV settings are selected.

  -I don't think it's a problem of cable, as the cable and TV connection to a different device port work.

  -When I shut down the computer and restart, the image of the start screen appears on the TV, but the computer screen is black. Then the TV goes black and the screen with my password. So, if I unplug and re - plug the HDMI cable, I get the error "no signal".

  -I am tired on the installation of plug-ins or drivers because the connection work successfully only two days ago (although I will say that there are updates installed between the last time that the connection was successful and now). But if this is what will fix the problem, then I'm game.

  I'd like opinions and advice. Thanks in advance.

  Hello

  I connect HDMI permanently to a screen (TV, IE) and I use the monitor 2 only. Everything turns on the external display.

  Kind regards.

• Not plugged into the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Original title: high speed HDMI does not.

  I plugin the HDMI cable between the PC and the TV for watching movies, but it has no sound and the image.

  Hi lisa,

  Try these steps and check the result.
  Step 1: Manage audio devices
  a. Click Start and then click Control Panel.
  b. click hardware and sound.
  c. under sound, click on manage audio devices.
  d. click on the playback device you want to output sound. Right-click in the empty space and click on see the disabled devices to see other devices.
  e. Select the device and click on set as default and then click OK.

  See http://support.Microsoft.com/kb/953500

  Step 2: Graphics output to monitor
  a. right click on the desktop, click chart options.
  b. output to monitor.

  Step 3: Adjust graphics hardware acceleration
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
  Note: Some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider at different levels and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hello. I just bought an HD TV and have cable HDMI installed on my computer. But now I've lost sound on my computer speakers. I don't know why...

  Hello. I just bought an HD TV and have cable HDMI installed on my computer. But now I've lost sound on my computer speakers. I don't know why...

  According to the map, you must use SPDIF to connect it to the SPDIF header on the motherboard. Map however NOT all need SPDIF to get sound

• Which cable shoud I use between perc h700 and F678M bottom of basket R310

  install a h700 to my server r310 for 4 x, 3.5sas raid5 planning table

  but not sure how to connect h700 with F678M

  Sorry for that google translated English lol

  Lx100.

  You will need cable Mini SAS of P/N N262J for the connection between the controller and the motherboard.

  Let me know if you have any other questions.

• I use SyncToy 2.1 for syncing between two readers and I wonder if it is possible to synchronize three discs without causing confusion for SyncToy.

  Hi all, I use SyncToy 2.1 for syncing between two readers and I wonder if it is possible to synchronize three discs without causing confusion for SyncToy. In other words, I want to have a (portable) master and synchronize with a Home Office and a disc of office disc.

  Original title: SyncToy 2.1

  Hello

  Thanks for posting your question on Microsoft Community!

  After your description, it seems that you need more information about SyncToy 2.1.

  I would like the season help you post you question on the following link for better.
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

  I hope this helps!

• Qosmio G50 - 10I - no synchronization on TV between the picture and sound

  My problem is that there is no synchronization between the picture and sound (+ the sound is thin about 5 seconds +)
  When I watch TV on Windows Media Center on the Qosmio G50 - 10I

  I tried to change the settings in Windows Media Center, but some will escape.

  How to connect this TV to the G50?
  You use the HDMI cable that provides audio and video signal together at the same time or you connect the TV with two different cables (for audio & video signal)?

  Also check the settings in Realtek HD audio Manager located in the control panel. Here, you can change some sound effects for different outputs (digital speakers, HDMI) audio

  PS: Last but not least install codecs. I recommend a package called K-Lite Mega codec package

• L750 satellite will not connect to the TV via HDMI and stops

  Hello

  When I try to connect my laptop Satellite L750 (a Conia Plasma) TV via a cable HDMI, the laptop screen turns black and becomes immune, while TV records the laptop for a second, but then said no signal. Even when I take the HDMI to the computer, the screen will remain always black, and I end up having to restart.

  I tried all the HDMI ports on the TV and the different HDMI cords without change.
  Other laptops will play on TV without problem and my laptop will join also the other TV more, so I'm completely at a loss as to why the two custom work together!

  Also (not sure if it is relevant or not) but when I press FN + F5 to display output options, the only option available is output to LCD display. Is that means the laptop will connect only with a LCD TV?

  Is it possible to change/upgrade, that?

  All advice from someone who has had a similar problem or help from someone who knows how to solve this problem would be greatly appreciated!

  Thanks :)

  You can use the HDMI out port in connection with all TVs and external monitor which favour the HDMI IN jack.
  The HDMI isn't limited to a certain TV interface.

  The FN + F5 key combination to toggle between internal and external monitor/display (if connected).

  In your case, there is an open question about preinstalled system.
  Do you use the operating system preinstalled by Toshiba or did you change it in the past?

  If you have changed the system, the problem could be linked to the preinstalled graphics driver.

  However, my recommendation is simple:
  First of all I recommend you to reinstall the graphics driver.
  First uninstall the installed driver (do this in Device Manager). Then download the compatible driver from Toshiba UE driver page and perform the installation.

  Now close the notebook. Switch on and press F2. Now, you need to access the BIOS.
  In the BIOS, press F9 to load default settings. After that, press F10 to save the changes and exit the BIOS.
  Now connect the laptop to the TV using an HDMI cable.
  Turn on the TV and then laptop.
  Shortly after, use the function FN + F5 keys to switch to the external video output.

  Good luck!

• communication between the printer and the computer stops

  Original title: printer problem

  Without rhyme or reason communication between our computer and the printer just stops (often!)   Why?  and how to fix it?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Laptop connected to the TV using a cable HDMI gets no picture just audio

  My TV captures the laptops of screen cable hdmi soon an i plug it in but won't play no audio and I cannot work out how to get the audio working. Help, please

  Hi cus.

  VGA, DVI and component video cables do support audio signals. HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separated from the sound card of your computer directly to the TV. Otherwise, you need to connect the different audio signal to an output device, such as external speakers or your stereo.

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  Update the driver for graphics card on the computer and check.

  How to upgrade the graphics card on the machine driver

  1. click on Start, click Control Panel, and then double-click System.

  2. click on the hardware tab, then Device Manager.

  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  3. click on display adapters to expand.

  4. under display adapters, double-click the entry for your graphics cards, and then click the driver tab.

  5. click on Update driver software.

  6. follow the Wizard update driver to update the driver graphics cards .

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cables HDMI Apple work - others do not?

  After struggling for several days, trying to use a new Air 2 with an adapter of lightning AV HDMI Out WITHOUT success, I joined the forum to get answers. Of course, I tried two HDMI cables different and two tv sets different. Of course, I replaced the Digital AV adapter and resumed the trial, and then finally it came down to visit the Apple store 35 miles!

  Their trial has proved that the HDMI cable I own and brought with me was the problem, because as soon as they hung one of their HDMI cables - voila! The display was evident on their TV.

  In addition to the thickness of the Apple being less than the standard HDMI cable HDMI cable, I am owner and see available all the time, what special "magic" exists inside the Apple HDMI cable to get an Air 2 using a lightning AV adapter to work?

  In case you ask each of the two HDMI cables I own and used in my first attempts are both viable and have been successfully Imaging my HD camcorder to a TV and other manifestations of LCD projectors.

  I want to learn!

  $20. investor in yet another cable HDMI that seems only available at Apple.

  He must take over the hdmi 1.3 or better according to me, like the tv

• Output VGA jumps between external monitor and Satellite L505

  I have a Satellite L505-144 related to an external VGA monitor via a KVM Aten 2-way switch.

  Intermittently on the screen of the external monitor black background, the image will transfer to the screen of the laptop for a second before returning to the external display. This does not seem to be triggered by any particular measure of keyboard or mouse and doesn't seem to be time bound.

  The keyboard and mouse connected to the KVM seem unaffected. I have the latest video bios motherboard and all the latest drivers Toshiba comes out loaded.
  To test the KVM I connected a Toshiba NB200 L505, stops problem instead, replace the L505, it comes back.

  The question is not performed by the presence of a second PC connected to the KVM. I have tried with a second PC on and outside, connected and unconnected, is still no change in the problem.

  I spent the autour KVM cables and the problem persists and follows the L505. If I connect the L505 directly to monitor the problem disappears!
  I find its a problem between the KVM and the L505.

  Is there a known fix or get around it?
  Is there a guarantee if I get a Belkin KVM say this question with the L505 will not happen with this material as well?

  At first, I have to say that I n t believes that Toshiba offers fix for this. Toshiba doesn't support the use of third-party products part so if there are a few possible correction or bypass ATEN ought to know this.

  Connect any external devices you use directly on your Satellite L505, try features and let us know f you have a problem similar or any other.

• What is the best cable for monitor DVI - D and VGA input connectors?

  I buy HP P6300z desktop computer with ATI Radeon HD 4350 (DVI, HDMI, adapter) graphics card and W1858 monitor VGA; DVI - D input connector. A VGA cable is supplied with the monitor. The VGA cable will give me the best viewing experience or should I buy another cable?

  Buy a DVI - D cable.  DVI means Digital Visual Interface. It will provide images of superior quality on your screen as VGA.

  VGA is analog.

  HDMI (High Definition Multimedia Interface) even better would have been

  Kind regards
  ERICO