Calc help - copy all the accounts from Parent to child

Similar Questions

• How can I copy all the content from my old hard drive on my hard drive again?

  My old PC is on its last breath and I decided to replace it. I bought a new more powerful PC and thought that by installing my old hard drive (Windows 7 on a Sata Drive) be simple and give me all my current programs without the need to install again. Unfortunately, my new PC refuses to recognize the old drive and I need these programs. How to copy all the contents of a new (bigger hard disk) without loss of functionality.

  Any help greatly appreciated

  Original title: old to new hard drive

  Remove the old drive, (just unplug its cables) reboot the PC, it does not start?

  If the method of connection of the old drive was at fault

  (Or bother readers origonal connections when you installed the old disk)

  BTW, you can not use the old drive as primary boot on your new PC drive, or you can access all the programs that have been installed on this subject.

• Cannot copy all the songs from smart playlist in normal playlist

  I have a bunch of smart playlists that I use regularly, but the smart playlists is not supported of Apple's music within the ecosystem of Sonos, so I'll try to copy the contents of each in a "beast" playlist that I can use effectively when music plays in my Sonos system at home. I'm having problems trying to get this in iTunes on my PC, though.

  For example, I'm in my smart "Top 100 most played songs" playlist in iTunes and highlight all the songs. I then drag them all over a new normal mute playlist, and it seems that all 100 songs are copied on (based on the number and the red circle that appears on the slider as I drag-and - drop). When I look at the new playlist, I see only 27 songs. The common theme seems to be that only the songs I added to my library of Apple's music are copied. Local songs in my library that I actually own original (the 73 remaining in the smart playlist) is don't move. If I return to smart playlist and try to copy them individually owned the songs, it works, but I have to do than 73 times, and it's just for a playlist.

  Anyone got any ideas how I can get all the songs to copy on the new playlist 'fool' massively? I can use the "duplicate" option if my source is another list of silent reading without encountering this problem, but it does not work if my source is a smart playlist and I am trying to create a regular.

  Right click > make the playlist from selection work?

  TT2

• Help to remove the account from Microsoft

  Hello world

  I want to remove my account from Microsoft (https://account.live.com/closeaccount.aspx), but when I'm about to move forward, there is a great message to say out loud "make sure that * address email is removed from the privacy * is ready to close ', and it has info on how to set up automatic responses, etc...  The problem is... I don't want to delete my gmail account, I want to remove my account from Microsoft.  I signed up just to use the synchronization of OneNote, which I changed since then and I want to clean up after myself.

  Question: If I have my Microsoft account deleting, I delete my gmail account or only an association on behalf of gmail?

  I realize this is really basic, but I was unable to string together a search phrase Google/Bing which lead me to a response.

  Thanks in advance.  :-)

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the reason for the deletion of your Microsoft account?

  Thank you for details on the issue.

  Deleting an account Microsoft does not close the account that are associated with him. It only removes its association. Thus, your "Gmail" account will remain open.

  You can refer to this article:
  How can I close my account?
  http://Windows.Microsoft.com/en-us/Windows-Live/account-close-account

  See also:
  http://Windows.Microsoft.com/en-us/Windows-8/how-add-remove-account-Microsoft-account

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Copy all the BLOBs from one table to another

  Hi all
  
  I hope that I put in the right place. I am trying to copy from one table to the other BLOBs, but were usuccessful. Here is the script that I wrote to do, but it just loaded a field saying not supported. Is there something I'm missing, I'm using the APEX 3.1.2.
  
  Thanks for your help.
  
  DECLARE
  number of v_id;
  v_document blob.
  v_filename varchar2 (200);
  v_mimetype varchar2 (200);
  
  
  
  CURSOR c_Document IS
  SELECT id, name of the document file, mimetype
  IN v_id, v_document, v_filename, v_mimetype
  
  OF CAB_APPEAL_ACTIONS
  WHEN THE DOCUMENT IS NOT NULL;
  
  BEGIN
  
  FOR r_Document in c_Document
  LOOP
  INSERT INTO CAB_APPEAL_DOCUMENTS
  (APPEAL_ACTION_ID,
  DOCUMENT,
  FILE NAME,
  MIMETYPE
  )
  VALUES
  (v_id,
  v_document,
  v_filename,
  v_mimetype
  );
  
  END LOOP;
  
  END;

  In addition, what is wrong with just...

  INSERT INTO CAB_APPEAL_DOCUMENTS (APPEAL_ACTION_ID,
                                    DOCUMENT,
                                    FILENAME,
                                    MIMETYPE)
     SELECT   id,
              document,
              filename,
              mimetype
       FROM   CAB_APPEAL_ACTIONS
      WHERE   DOCUMENT IS NOT NULL;
  

  APEX will end process page in a BEGIN block... END; block anyway.

  See you soon

  Ben

• What is the best way to copy all the files from one hard drive to another?

  Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

  Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

  Use disk cloning software.

  The safest way is to use an external hard drive enclosure to maintain the new disc during the cloning operation.  These come with interfaces USB or e-SATA to IDE or SATA interfaces for the drive and the computer.  Be sure to get the correct type.  If you have an available internal drive Bay, you can put the new drive it for the cloning operation, but do NOT restart with two connected drives.  After everything was settled down, you can mount the old disk of 60 GB inside, format and use it for storage of backup.

  Cloning (copy to disc) software may have been bundled with your new drive or may be accessed free of charge from the manufacturer of the new command.

  Otherwise, here are a few apps cloning that I have used myself or have been recommended by members of the community:

  Acronis True Image Home
  Casper
  Paragon Drive Copy
  EASEUS Partition Master

• How to copy all the files from one folder to another?

  Hi all

  I use this code but the files are not copied.

  sourceFolder var = new Folder("/Users/admin5/Desktop/Fonts");

  targetFolder var = new Folder("/Users/admin5/Desktop/123/");

  myFiles = sourceFolder.getFiles ();

  for (var i = 0; i < myFiles.length; i ++)

  {
  Alert (myfiles [i]);

  var myFile2 = new queue (myFiles [i]);    Alert (myFile2.fsName);
  If (myFile2.copy (targetFolder))
  {
  Alert ("Yes");
  }

  on the other
  {
  Alert ("no");
  }

  }

  var MYF = Folder("/Users/admin5/Desktop/Fonts");

  If (myf! = null)

  {

  var myfile = myf.getFiles ("*. *");

  var filename = myf.name;

  for (var i = 0; i)<>

  {

  var sourcePath = File("/Users/admin5/Desktop/Fonts/"+myFiles[i].name);

  var targetPath = File("/Users/admin5/Desktop/123/"+myfile[i].name);

  sourcePath.copy (targetPath);

  }

  }

• Mounting external USB HDD to host copy all the s vm to the local data store

  I have a scripted ESXi installation that works very well, but once the installation is completed I want to copy all the VM from a disk external DRIVE to store data on the host computer.

  There is no attached servers/clients, so it must be done from the host itself.

  in thele/var/log/usb.log file on the hard drive is recognized, but how to access and copy all the external HARD disc VM in the data store?

  install vmware tools

  _________________________________
  Good luck!

• Hi I want to erase all the data from my current phone if I erase content and settings would be deleted all the data off my sim card? Thanks for your help

  Hi I want to erase all the data from my current phone if I erase content and settings would be deleted all the data off my sim card? Thanks for your help

  Erase the data on your phone will not erase the data on the sim card.

• "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  "I can't copy all the files to my kingston sd card, when I try to copy his shows that" remove right protection "so plsss help me get rid of this.

  Hi ebugsasi,
   
  To remove protect him writing on a kingston Micro SD cards, locate a switch or button on the side of the micro SD adapter card. It will normally be a symbol of locking/unlocking on it. Put it to the unlocked position.
   
  This should remove the write-protection feature.
   
  Keep me updated on the status of the issue.

• need to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista

  you want to know how to block the ophcrack from running, my child uses this to get my password and in the parental controls in vista. I have 3 accounts going 2 for children and one for the parents/administrator. I found ophcrack in several places on the computer. any help would be greatly appreciated

  The only question the idea of Malkeleah, that is when you put a password on BIOS, all you need to do is pop the battery from the motherboard and the password is gone. Faronics has in some programs such as anti-executable and a few other programs that may block the name or ID of a process and prevent it from running (some antiviruses have that option, such as Avast, but usually is a pain in the ass to configure)

• Need some ideas on the copy of the data from one schema to another.

  Dear all,
  
  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  
  
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.
  
  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.
  
  Thanks in advance...
  
  Concerning
  Suresh

  GSKumar wrote:
  Dear all,

  I would like to know the best method and possible by copying data from one schema to another. (I won't use EXP / IMP).
  Example:
  I have a scheme of production on which I have hundreds of tables. I copy the data of the TEST environment after comparing data, I should copy the data incrementally.
  Maybe this copy of data may occur once a month, or on request.

  I want to have this done by a procedure.
  I was thinking about the logic below, using a procedure I will compare the tables and the structures between the two schemas.
  Then I willl use the primary key in both tables column and compare the data first. If the data if it does not exist then I only inserts these records in the target.
  The above said logic could be as similar as the synchronization of data or records, but the table does not all columns to track records archived / copied from the source.
  Suggest me so if you can give me the best logic or solution.

  I don't know why you don't want to opt for EXP/IMP.
  As an alternative, if you have a link DB between Production and Test pattern (which I seriously doubt), you can use the MERGER to a copy of data from Production to Test Delta.
  a. INTRODUCE IN test_schema.table_name SELECT sequence_columns, column_list FROM (SELECT column_list FROM prod_schema.table_name LESS SELECT column_list from test_schema.table_name)
  Column_list must not contain columns that contain sequence values because they may differ and result in an incorrect result; Therefore, this is taken into account in the outer query rather than Inline mode.
  b. MERGE STATEMENT
  c. FALL of test_schema.table_name. CREATE test_schema.table_name as SELECT column_list from prod_schema.table_name; -A way very neat to copy all the data, provided you do not keep any changes to test the tables in the schema.

  However, you mentioned to find existing records based on the primary key; IMO, primary key is normally a sequence (may be alphanumeric) and its value on env Production and Test may defer or even can have different attributes, therefore, I find it incorrect to match only the primary keys. I would say to match the key attributes.

  If you want to follow the last update/insert for a record, you can add a column that puts the time of last modification. In this way, you can track the changes of a column. Another alternative would be to use a check to the table.

  Let us know your thoughts or concerns, so that help can be provided.

  I suggest that you read and follow {message identifier: = 9360002}.
  If you will be useful if you can provide all the information required in advance to help us provide you with a quick resolution.

• I can not all the sounds from my computer

  I can not all the sounds from my computer. I hae tried to click place volume icon in the taskbar, but it won't let me and she also come with 'there is no active mixer device. To install mixer devices, go to control panel, click Printers and other hardware, and then click hardware, but it's not it will fade. Please can someone help me.

  The sndvol32.exe file is possibly corrupt.

  To replace, there are two methods:

  (1) open the Windows Explorer > tools > Options > view > make sure that show hidden files and folders is NOT checked. Access the c:\windows\system32\dllcache and locate sndvol32.exe > copy it into the following folder c:\windows\system32, overwrite the existing file. > Re-boot, you should now have access to your sound mixer and be able to place the icon on the taskbar. If for any reason any you do not find the dllcache folder:

  (2) put your XP CD in a driver, don't let it start. Then: Start > run > type in msconfig > enter or OK > extract a file > 1st enter in sndvol32.exe > in the second point of the box to your CD player > 3rd enter in c:\windows\system32 > extract file > run over if necessary, close everything and restart.

  If the above does not work, re - install you 'audio drivers, although I would only do it as a last ditch measure.

  See you soon,.

  Jerry

• Windows XP Office cannot receive all the files from my Windows 7 laptop.

  I have a desktop running WMP 11 on XP and a laptop computer under WMP 12 on Windows 7. Both are connected to the desktop computer even router-, mobile - wireless ethernet.
  Problem is my laptop can receive files that are shared in my office... but my office cannot receive all the files from my laptop, all two media sharing enabled and have all two disabled firewall.

  BTW, I've noticed that my office does not appear on my local network or all networks under "media streaming options" on my laptop...

  original title: the windows media player 12 does not share with WMP 11 (completely)

  Hello

  1 have had modifications made to your computer before the problem occurred?

  2. did you install or uninstall all the programs on your computer until the problem occurred?

  3. do you get an error message or error code when you access or file sharing on the network?

  4. what security (Antivirus & Firewall) program is installed on your computer?

  5. were you able to access shared files and folders on your laptop from your desktop earlier?

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method:

  Sharing files in Windows 7 and XP

  Sharing folders between two Windows 7 machines with the new homegroup feature is an easy process, but the homegroup feature is not compatible with Vista or XP.

  First of all, make sure that both computers are members of the same workgroup which by default is named Workgroup.

  a. on the Windows 7 machine go into control panel-all items in the control panel-network and sharing Center then click on change sharing settings, advanced.

  b. you want to check the following settings under Advanced for home or work and Public profile sharing settings.

  ·         Turn on network discovery.

  ·         Printer sharing and file.

  ·         Turn on sharing so anyone with network access can read write files in public folders.

   

  c. If you want any user to access public actions disable password protection.  It is located in the sharing settings advanced to the bottom of the list (protected by password sharing).

  ·         Turn off password protected sharing.

   

  d. If you want to keep it enabled, make sure that there is a newspaper account that the other XP machine and they have a password.

  e. over on your XP machine open my network places to search for the shared folder of Windows 7.

  f. double-click the shared folder to find a list of shared folders in the folder Public of Windows 7.  If you have password protection enabled you will have to type the user name and password of the user account on the windows 7 machine first.

  Check out the links below and check if this is useful:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Sharing files and printers with different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

  Hope this information helps you.

• Photoshop script to copy all the layers of close PSD to open the current document

  Hi, I have very limited capacity script so this task is above my pay grade

  I'm looking for a script to read and copy all the layers in a PSD saved file and copy them into the current active document. The two documents have the same size and I need to be able to change text layers after copying. Anyone has any advice or examples of how I might be able to do this?

  Thank you in advance for any help you can offer.

  Kind regards

  Marcus

  Try the script in entry below. You must open the destination file, and you must put in the path and name where your source file. It will not choose a layer from background from the source file.

  #target photoshop
  var sFile = new File('~/desktop/template.psd');//change path to template file
  var doc = activeDocument;
  var sDoc = open(sFile);
  
  var idselectAllLayers = stringIDToTypeID( "selectAllLayers" );
      var desc2 = new ActionDescriptor();
      var idnull = charIDToTypeID( "null" );
          var ref1 = new ActionReference();
          var idLyr = charIDToTypeID( "Lyr " );
          var idOrdn = charIDToTypeID( "Ordn" );
          var idTrgt = charIDToTypeID( "Trgt" );
          ref1.putEnumerated( idLyr, idOrdn, idTrgt );
      desc2.putReference( idnull, ref1 );
  executeAction( idselectAllLayers, desc2, DialogModes.NO );
  
  var idDplc = charIDToTypeID( "Dplc" );
      var desc5 = new ActionDescriptor();
      var idnull = charIDToTypeID( "null" );
          var ref2 = new ActionReference();
          var idLyr = charIDToTypeID( "Lyr " );
          var idOrdn = charIDToTypeID( "Ordn" );
          var idTrgt = charIDToTypeID( "Trgt" );
          ref2.putEnumerated( idLyr, idOrdn, idTrgt );
      desc5.putReference( idnull, ref2 );
      var idT = charIDToTypeID( "T  " );
          var ref3 = new ActionReference();
          var idDcmn = charIDToTypeID( "Dcmn" );
          ref3.putName( idDcmn, doc.name );
      desc5.putReference( idT, ref3 );
      var idVrsn = charIDToTypeID( "Vrsn" );
      desc5.putInteger( idVrsn, 5 );
      var idIdnt = charIDToTypeID( "Idnt" );
          var list1 = new ActionList();
          list1.putInteger( 3 );
          list1.putInteger( 4 );
      desc5.putList( idIdnt, list1 );
  executeAction( idDplc, desc5, DialogModes.NO );