Calculate the price based on the field

Similar Questions

• Calculate the fields do not work

  I am relatively new to work with Adobe Acrobat 9 Pro, JAVA Scripts, and PDF files. Though this may seem like a question of newby. I have a PDF file that has tons of fields which are populated under control of a database of the program. When the PDF file is made in my view to MVC, PDF rises and the fields display the correct values, but the fields that contain the total values are all zero (0). These calculate the fields I'm went to properties, calculate tab and then set the value set is (sum +), then chose the fields to be added. to test this, I put the default values of the fields to a 1 and on the ground, I began to calculate the sum shows the correct number. Then, I saved the PDF file and moved in my MVC file. When I run the program and say to the PDF, the PDF is called, values are met, and the PDF file will be displayed on the screen. Filled in all areas have the correct values but the field calculate display zero (0).

  The PDF file. You embed it in the form of script at the level of the document through Advanced - Document

  Treatment - Document JavaScripts.

  Make sure that it is not in function, but...

• calculate the field of vision or the focal length of harvest

  Is there a way to do this or a plugin that someone knows?

  (If you have a shot at a 14mm but you crop to the center of it, it would be good to know what is equal to the equivalent focal length of culture)

  Set the Info Overlay to show the new cropped dimensions. In the case the simplest where the aspect ratio of the culture is the same original image, divide one side original by the culture to get the crop factor. If the original is from a full camera frame, the equivalent of 35 mm. long focal length times the crop factor. If the camera has a sensor that is less than 24 x 36 mm, the total of crop factor is crop factor of the camera times the factor of culture "in LR. So, if you have a Canon 7 d, which has a sensor 5184 x 3456 pixels and a factor of 1.6 harvest and crop you the image to 2592 x 1728, the crop factor resulting is 3.2 and your 14 mm lens. will take the field of VISION of a 44.8 mm lens. on a 35 mm camera.. If the harvest of LR has an aspect ratio different that the original, the equivalence is, of course, different for the height and width.

• If statement to calculate the field

  I have a somewhat complex formula to calculate on a form. In English, the formula is the following:

  (Population served - 10 000) *.05 + $400

  With $400 is the amount of base if anything equal or lower to 10,000 should be only $400

  Here is the javascript code that I have on my property. It works fine when I get home, '1', '9000', '450', but if I enter "5000", it returns a value of $150. I'm really confused by what is happening if I must be missing something in the code:

  var a = this.getField ("Population");

  var b = this.getField ("PopulationTotal");

  b.Value = (a.value - 10000) *.05 + 400;

  If (a.value < 10000) {event.value = 400 ;};

  The fundamental error in the coding is that the result should be compared with $ 400 and not the numerical value of the population.

  Try this line:

  Event.Value = Math.max (400, (400 + ((a.value*1-10000) * 0.05));)

  and leave the fourth line on.

  This would lead to the right numbers?

• Drill through fields, mapping with calculate the field

  I have create a calculation field in a view, then when config drill overall, I put the mapping calculation field to display target setting
  Save the report
  So I opens the report in display mode, click the view what config drill everywhere, it get error JavaScript online DrillAcrossModifierManager.js 272, object required

  Yes, it's a known issue. We you consider this in our next update.

• How to calculate the Total price based on a rate of m² with different prices?

  Hello

  I'm guessing that it is a script, but I've never done any script so I would like to ask you guys...

  I have a form where I would calculate the total price for some carpet based on the price per sqm.

  -L the user enters the number of carpet needed.

  -There are different price points for 1-20, 21-60, 61 + m² (each with their own hidden field that contains the value of awards).

  -The Total Price field evaluates the relevant quantity and multiply by the square metre rate.

  Is it achievable?

  I guess that all solutions are placed in the "Custom calculation Script" field too?

  Thanks in advance!

  Yes. You can use something like this, as the custom of the price field calculation total (you may need to adjust the domain names):

  var sqm = Number (this.getField("SQM").value);

  rate of var = 0;

  If (sqm > 0 & m²)<=20) rate="">

  ElseIf (> 20 sqm & m²)<=60) rate="">

  ElseIf (> 60 sqm) rate = Number (this.getField("Rate3").value);

  M² = Event.Value * side;

• How to calculate the sum of two digital form fields based on the selection of the checkbox.

  I have a form in Acrobat Pro who needs a custom calculation. How to calculate the sum of two digital form fields based on a selection of the checkbox. I have three number fields. Field-A and B are simple one or two digits. Field-C is the sum, or the total field. I want to field-C have a control box which, when turned on and off, just gives a. gives the sum of A + B

  _ Field - 2

  _ Field - A 4

  [check] _ _ field - 6 C

  [disabled] _ _ field - 2 C

  Thank you

  The custom field C calculation script could be:

  (function () {
  
      // Get the values of the text fields, as numbers
      var v1 = +getField("A").value;
      var v2 = +getField("B").value;
  
      // Set this field's value based on the state of the check box named "CB"
      if (getField("CB").value !== "Off") {
          event.value = v1 + v2;
      } else {
          event.value = v1;
      }
  
  })();
  

  Replace 'A', 'B', and 'CB' with the real names of the fields.

• calculate the total based on text filled fields

  Hi, I have 5 text fields to fill out my form. first 4 fields are normal text fields to fill & 5th is total field. each field value is $ 15. what I want to do, is if the first field filled with any text and then the field value total is $ 15. If it is filled with second text fields and field value total $30. like this, he must calculate all 4 total fields. pls help me to handle this. Thank you...

  You can use something like that the custom field calculation script total (simply adjust the field names, of course):

  var total = 0;
  if (this.getField("Text1").valueAsString!="") total+=15;
  if (this.getField("Text2").valueAsString!="") total+=15;
  if (this.getField("Text3").valueAsString!="") total+=15;
  if (this.getField("Text4").valueAsString!="") total+=15;
  event.value = total;
  

• Calculate the value of the field based on the value of the user input field

  Hi all
  
  We use a BPM 11.1.1.5.0 with feature pack. We have BPM form which has five fields all the text in the input field. The user will enter any amount in these fields. We have another field in the form that displays the sum of the field all five. This should add the input value dynamically when the user navigates out of a field.
  
  I'm not able to think how I can achieve this. It is valuechangelistener I need code. Should I use a java code to get the value of the entry field and make the calculation in the java code and then assign it to the output field? or is there an option/BPM feature that allows to avoid java coding.
  
  Thanks in advance
  
  Sachin Gupta

  Add this as an idea because you asked how this could be done without Java code.

  If all five digital and no other item reference fields cannot be empty or null, you can:

  (1) for each of the 5 numeric fields, expand the section "Behavior" property and set their properties Autosubmit true. As you look at each of the 5 areas, note the text in each of their property 'Id '.

  (2) for the numeric field (I'll call it the "SumValue" field), you added that you want to add the other fields, expand the "behavior" property section-> click the arrow to the right of the property 'PartialTriggers'-> in the transfer dialog box that comes up, select each of the 5 areas (those you find the ID of the first step) and their shuttle above the selected list-> click OK-> look at your PartialTriggers for the field of SumValue property - it should now display the ID 5 with spaces between them.

  (3) open each of the 5 areas and copy the text in each of their properties 'Value' (e.g. #{bindings.) Salary1.inputValue}) and paste this text for each of the 5 text fields in your text editor in a text-> if editor is

  #{bindings.Salary1.inputValue} #{bindings.Salary2.inputValue} #{bindings.Salary3.inputValue} #{bindings.Salary4.inputValue} #{bindings.Salary5.inputValue}
  

  to take

  #{bindings.Salary1.inputValue+bindings.Salary2.inputValue+bindings.Salary3.inputValue+bindings.Salary4.inputValue+bindings.Salary5.inputValue}
  

  (4) select the field 'SumValue'-> again in the property Panel, delete the text in the field 'Value'-> paste the text you created in your text editor in the 'Value' property of the field SumValue.

• Calculates the treatment field values 1 step behind

  I have a very long form created in Acrobat Pro (latest version).

  To simplify the problem, this is what is happening.

  I have text boxes on a form and the user will enter quantity and price in each row for the materials and form will calculate to multiply these values and give you the total for each product and at the end, add all the totals giving you your total final.

  T1 * P1 = T1

  T1 + T2... T40 plus Total cost of material

  Which works very well.

  I then the user enter the estimate and below this breakthrough for what is the cost of labour, which is the cost of equipment, which is taxes, and then the rest is profit. The cost of the equipment is simply copied to the Total cost of the above materials.

  However, the calculation is made to simply take so I need percentages thus:

  The total cost of materials / estimate = percentage

  This grave 1 step walk behind. As in, it has not calculated the first go-around. You must enter a value elsewhere on the form or if I generate a button "Calculate" it will then deal with it. It's like if we take the old value before the field has been dynamically updated.

  Link to the PDF is below, if you fill in the Qs and Ps see the Ts fill fine.

  Below on the left turns is the estimate that you need to enter. In doing so, you will see the % for material cost and profit are bad, if you change a value anywhere on the form, you will see that they are then the value that was already there.

  I hope that makes sense for a person, the calculated values are 1 step behind and I need to understand why and get that fixed.

  Link to the PDF document

  Also, if I do these fields % under the shape number and 2 decimal places, I get an avalanche of mistakes whenever I enter a new value somewhere on the form I think because he's trying to divide by a number of vacuum which get a NaN error and gives me a pop up that it does not match the required format. How can I disable this error? I need to limit it to 2 decimal places, or 3 actually, but don't have a ton of errors popup whenever the user starts to fill the form.

  It's a problem of calculation of classic field command. You need to go to Tools - Forms - change - other tasks - defined field calculation order and whole list in the order in which calculations occur. So if a field is dependent on the value of the field B, then it must be lower than him in the list.

• For the field price GP business portal

  By using the following:

  GP 2010

  BP 5.0

  When you create a requisition in Business Portal the item price field gathers at the current cost of the item of GP.  The user wants the field to always be $0, so they can enter the amount in dollars.  They don't want to shoot the current cost of the GP.  Is there a way to get there?

  Thank you

  Jennifer

  Hello

  Check out these resources:

  Microsoft Dynamics - help and how-to (technical support options)
  http://www.Microsoft.com/en-us/Dynamics/default.aspx

  Microsoft Dynamics - community, Forums & Forum search
  http://community.dynamics.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to assign the field width based on the screen wdth

  I have my ownfield, I'm adding to the screen, or the Manager

  I want to give the height and the width of field based on the width of Manager screen, when I try I got errors.

  the code I used is

  Field ff;
          int j=(Display.getWidth()>360?4:3);
          int compwid=Display.getWidth()/j;
          int compht=40;
          int posx=0,posy=0;
          int no=this.getFieldCount();
  
          for(int i=0;i
  When I do cela in the display main () sublayout, I get the error as "the field is not a child of this Manager.
  Similarly when I add to the Manager sublayout, I get as field must call setExtent and setPostion for available.
  Where I'm going wrong?
  You can help with that.
  Concerning
  Rakesh Shankar.P
  			 
  Hi guys, I was able to get this working, pblm is that I called super.sublayout () just before the Codes I have describd in the previous post.
  Concerning
  Rakesh Shankar.P
  		   

• How to calculate the sum of the fields to fill?

  Hello!

  My question is how can I calculate the sum of filled areas?

  For example, in a PDF document, I have a few fields that must be filled out with name and surname and the end of the document, another field that is the sum of the fields "FullName" which shows how many people is in this document. The operation should not take into account white/empty areas.

  Now, I know that I could do with the simple calculation "(+) sum" but I have to put a '1' for each of this area and I would like to avoid this.

  Yes, it's the first option I described. In this case, you can use this code:

  var total = 0;
  for (var i=1; i<=79; i++) {
      if (this.getField("Nume si prenume "+i).valueAsString!="") total++;
  }
  event.value = total;
  

• change the field type selection list of text based on the data in the other domain.

  Hello

  We have a requirement where we are looking to display the page as element select list or a free text field based on the value of the item to another page.

  Say, we have two fields

  Day:

  Products:

  If day = 'Monday' produced a drop in low field of another product would be a free text field.   Is this possible in APEX?

  This is the configuration I did.

  I used the field produced twice (as a text and list field select) as an element of a page., dependent on the value of the day I used the dynamic properties of actions to show/hide these fields.

  However, when I click on submit, it throws an error:

  ORA-06550: line 1, column 108: PL/SQL: ORA-00957: name of column in double ORA-06550: line 1, column 13: PL/SQL: statement ignored

  
  

  Kind regards

  Satya

  You can have both share the same database column, the process of the APEX DML does not know how to consolidate.

  You will need to add a calculation and determine the real value based on two fields, up to an only one mapped to db.

• I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  Mr President.

  I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  

  the page source is

  <?xml version='1.0' encoding='UTF-8'?>
  <ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                  xmlns:f="http://java.sun.com/jsf/core">
    <af:panelFormLayout id="pfl1">
      <af:group id="Group">
        <af:inputText value="#{bindings.VoucherId.inputValue}" label="#{bindings.VoucherId.hints.label}"
                      required="#{bindings.VoucherId.hints.mandatory}" columns="#{bindings.VoucherId.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId.hints.precision}"
                      shortDesc="#{bindings.VoucherId.hints.tooltip}" id="it1">
          <f:validator binding="#{bindings.VoucherId.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId.format}"/>
        </af:inputText>
        <af:inputDate value="#{bindings.VoucherDate.inputValue}" label="#{bindings.VoucherDate.hints.label}"
                      required="#{bindings.VoucherDate.hints.mandatory}"
                      columns="#{bindings.VoucherDate.hints.displayWidth}"
                      shortDesc="#{bindings.VoucherDate.hints.tooltip}" id="id1">
          <f:validator binding="#{bindings.VoucherDate.validator}"/>
          <af:convertDateTime pattern="#{bindings.VoucherDate.format}"/>
        </af:inputDate>
        <af:inputText value="#{bindings.Credit.inputValue}" label="#{bindings.Credit.hints.label}"
                      required="#{bindings.Credit.hints.mandatory}" columns="#{bindings.Credit.hints.displayWidth}"
                      maximumLength="#{bindings.Credit.hints.precision}" shortDesc="#{bindings.Credit.hints.tooltip}"
                      id="it2">
          <f:validator binding="#{bindings.Credit.validator}"/>
        </af:inputText>
      </af:group>
      <af:group id="g1">
        <af:inputText value="#{bindings.Lineitem.inputValue}" label="#{bindings.Lineitem.hints.label}"
                      required="#{bindings.Lineitem.hints.mandatory}" columns="#{bindings.Lineitem.hints.displayWidth}"
                      maximumLength="#{bindings.Lineitem.hints.precision}" shortDesc="#{bindings.Lineitem.hints.tooltip}"
                      id="it3">
          <f:validator binding="#{bindings.Lineitem.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Lineitem.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.VoucherId1.inputValue}" label="#{bindings.VoucherId1.hints.label}"
                      required="#{bindings.VoucherId1.hints.mandatory}"
                      columns="#{bindings.VoucherId1.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId1.hints.precision}"
                      shortDesc="#{bindings.VoucherId1.hints.tooltip}" id="it4">
          <f:validator binding="#{bindings.VoucherId1.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId1.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Debit.inputValue}" label="#{bindings.Debit.hints.label}"
                      required="#{bindings.Debit.hints.mandatory}" columns="#{bindings.Debit.hints.displayWidth}"
                      maximumLength="#{bindings.Debit.hints.precision}" shortDesc="#{bindings.Debit.hints.tooltip}"
                      id="it5">
          <f:validator binding="#{bindings.Debit.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Credit1.inputValue}" label="#{bindings.Credit1.hints.label}"
                      required="#{bindings.Credit1.hints.mandatory}" columns="#{bindings.Credit1.hints.displayWidth}"
                      maximumLength="#{bindings.Credit1.hints.precision}" shortDesc="#{bindings.Credit1.hints.tooltip}"
                      id="it6">
          <f:validator binding="#{bindings.Credit1.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Particulars.inputValue}" label="#{bindings.Particulars.hints.label}"
                      required="#{bindings.Particulars.hints.mandatory}"
                      columns="#{bindings.Particulars.hints.displayWidth}"
                      maximumLength="#{bindings.Particulars.hints.precision}"
                      shortDesc="#{bindings.Particulars.hints.tooltip}" id="it7">
          <f:validator binding="#{bindings.Particulars.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Amount.inputValue}" label="#{bindings.Amount.hints.label}"
                      required="#{bindings.Amount.hints.mandatory}" columns="#{bindings.Amount.hints.displayWidth}"
                      maximumLength="#{bindings.Amount.hints.precision}" shortDesc="#{bindings.Amount.hints.tooltip}"
                      id="it8">
          <f:validator binding="#{bindings.Amount.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Amount.format}"/>
        </af:inputText>
      </af:group>
      <f:facet name="footer">
        <af:button text="Submit" id="b1"/>
        <af:button actionListener="#{bindings.CreateInsert.execute}" text="CreateInsert"
                   disabled="#{!bindings.CreateInsert.enabled}" id="b2"/>     
        <af:button actionListener="#{bindings.Commit.execute}" text="Commit" disabled="#{!bindings.Commit.enabled}"
                   id="b3"/>
        <af:button actionListener="#{bindings.Rollback.execute}" text="Rollback" disabled="#{!bindings.Rollback.enabled}"
                   immediate="true" id="b4">
          <af:resetActionListener/>
        </af:button>
      </f:facet>
    </af:panelFormLayout>
  </ui:composition>
  
  
  
  

  Concerning

  Go to your VO Wizard, select the tab of the entity and to check if both the EO is editable or not.

  See you soon

  AJ