Calculate the total in the table

Similar Questions

• How to include the total number of table one fact in another fact table to calculate the percentage

  I have a fact table in the grain of each document created in any organization, say the 1st table of facts. I have another table of facts (2nd fact table) seen those documents which are considered by different commentators. grain of this second fact table is so each review, even if I document in both IDs the fact table.

  Now, I want to calculate the percentage return documents reviewed. For this I need to divide count separate from the document of performance by the total performance document. Now this document of total performance can be obtained from the 1st table of facts, but I don't get how to bring this indictment in the 2nd table of facts to show the percentage.

  Please let me know if there is no ambiguity in my question, because I'm a starter in OBIEE.

  Thank you very much.

  then you can set new logical column with two columns of fact in the formula

• Calculate the sum of the 2 columns in the total column.

  Hello everyone.

  I have a question I hope you can help us

  I use the form of oracle 10 g , I made the table student FYI There are 5 columns ( HomeWorks, project, Midterm1, Midterm2,FinalExam), , I need to calculate these brands and put it in ( Total ) column using the form of the oracle. How to? .

  Another thing is it possible for me to restrict the user so that he can not enter more than 10 points for homework and not more than 15 points for project, etc.?

  I hope you can answer me I am really really really really grateful that I searched online, but no real solution especially for the second part of the question. will I change the varchar2 to the numbers?

  Thank you

  Yes... What you have to do is, you create when validating the element trigger on assignment, then put under code of the project

  IF (: blockname.itemname) > 20 THEN

  MESSAGE ("you must enter only less than 20 brands '");

  RAISE FORM_TRIGGER_FAILURE;

  END IF;

  Make the total, rank as a display element. Create a button contained within this block and put the code below in this WHEN the BUTTOM PRESSED trigger

  DECLARE

  v_total NUMBER;

  BEGIN

  v_total: =: Blockname. Mid1 +: Blockname. MID2 +: blockname.assignment +: Blockname. Final +: Blockname. Project;

  : blockname.total: = v_total;

  : blockname.grade: = CASE WHEN v_total<60   then ="">

  WHEN v_total<65   then ="">

  WHEN v_total<70   then ="">

  WHEN v_total<75   then ="">

  WHEN v_total<80   then ="">

  WHEN v_total<85   then ="">

  WHEN v_total<90   then ="">

  WHEN v_total<95   then ="">

  WHEN v_total<=100 then="">

  END;

  END;

• Calculate the elapsed time between the horodateurs log Table

  Hello

  I'm looking for some codes SQL allows to calculate the elapsed time between the timestamps in a log table.  The log table has some STOP-START operations.

  I just want to calculate the elapsed time between the START and PAUSE of Transactions, as well as START and EXECUTE transactions.

  So, in the example below, the time spent must be:

  START 09:15 break 09:20 (5 Minutes)
  START 09:30 to 09:45 (15 Minutes) FULL

  Total elapsed time for LOG_ID 1234 should be 20 minutes.  This excludes the 09:20 at 09:30 BREAK at the START time.

  LOG_ID	SEQ_NUM	LOG_TYPE_CD	CRE_DTTM
  1234	1	BEGINNING	09-15 - 2013:09:15:00
  1234	2	BREAK	09-15 - 2013:09:20:00

  1234

  3

  BEGINNING

  09-15 - 2013:09:30:00

  1234

  4

  ALL THE

  09-15 - 2013:09:45:00

  Any suggestions?

  Thanks for your time

  -DT

  Hello

  Thanks for posting the CREATE TABLE and INSERT.  be sure to post the results desired from these data.

  user13071913 wrote:

  Hi thanks for the help...

  The date is a true timestamp.  ...

  Here's a sample of CREATE TABLE and a few inserts.  3 ID transaction, each with a series of journal entries.

  CREATE TABLE 'LOG_TABLE_X '.

  (SELECT 'ID' CHAR (14 BYTES) NOT NULL,)

  ACTIVATE THE "LOG_TYPE_FLG" TANK (4 BYTES) NOT NULL,

  ALLOW "LOG_DTTM" DATE NOT NULL

  );

  ...

  I'm so confused.  Is log_dttm a TIMESTAMP, you said in the story, or is it a DATE, as you say in the CREATE TABLE statement, or is it a VARCHAR2 as Thur INSERT statements?  I'll assume it's a DATE.

  I left out an important step yesterday.  The computation of the last_start, we need to use a CASE statement so that we record only the time of events STRT.

  Here's the revised query:

  WITH got_last_start AS

  (

  SELECT id, log_type_flg, log_dttm

  LAST_VALUE (CASE

  WHEN log_type_flg = "STRT".

  THEN log_dttm

  END

  IGNORES NULL VALUES

  ) OVER (PARTITION BY id - can - be

  ORDER BY log_dttm

  ) AS last_start

  OF log_table_x

  )

  SELECT id, log_type_flg, log_dttm

  , (log_dttm - last_start) * 24 * 60 elapsed

  , SUM (log_dttm - last_start) OVER (PARTITION BY ID.

  ORDER BY log_dttm

  ) * 24 * 60 AS total_elapsed

  OF got_last_start

  WHERE log_type_flg IN ("CMPT", "PAUS")

  ORDER BY id, log_dttm

  ;

  Output of your sample data:

  ID LOG_ ELAPSED TOTAL_ELAPSED LOG_DTTM

  -------------- ---- ------------------- -------- -------------

  1111 PAUS 09-26 - 2013:09:09:58.17.17

  1111 CMPT 09-26 - 2013:10:09:58 1.00.83

  2222 CMPT 09-26 - 2013:12:09:58 180.00 180.00

  3333 CMPT 09-26 - 2013:10:09:42 59.73 59.73

  In Oracle, when you subtract one DATE from another DATE, the result is the NUMBER of days between them.  In the above query, I multiplied the past columns and total_elapsed by the number of minutes per day (24 * 60), to show the time in minutes.

• Calculate the total number of the schema rowset.

  Hi all
  
  I use the oracle 10g database on windows server 2003.
  
  I want to calculate the total number of lines in a pattern.
  I have only one method to select just count (*) from each table within each schema.
  because it doesn't matter what possible query that could calculate the total number of lines in a pattern?
  
  
  Thank you.
  
  Published by: Maahjoor on May 13, 2013 23:21

  Hello

  Well, if you keep your cool failry statistics, you can get a very good grip on the number of lines through the NUM_ROWS in dba_tables column and then summarize the owner, on the top of my head:

  select sum(NUM_ROWS) from dba_tables where owner like 'SCHEMA';
  

  Do not forget that the number of lines shown this way will be the number of lines at the time of the last crawl (dbms_stats) has been run on the segment, so it may not always be equal to the number of the schema rowset did when running.

• Calculate the maximum value of the sub-table when creating using a structure of case and records the shift

  I have two 1 d arrays that contain cyclical information (a bit like a sine wave).  One that contains information about the position in degrees and another that contains the couple.  I would like to calculate the value of maximum torque whenever the station is within a certain range (for example, 30 to 80 degrees).  The beaches are repeated - that is why it is cyclical.   I use the function "in the range", a structure of the case and the shift records to build a new table with the values that are included in the beach I said - that was easy part (see attached VI).  I'm struggling with a way to calculate a maximum value for each sub-table formed when the values are 'in range '.   Your help is very appreciated.

  vt92 solution worked!  I agree that there should be a simpler solution, but your to works fine.  Thank you very much.

• Can I get the total number of records that meet the conditions of a query using the Table API?

  Hello

  A < row > TableIterator is returned when I ask operations using the index of tables. If I want to get the total number of records, I count one by one using the returned TableIterator < row >.

  
  

  Can I get the total number of records directly meets the conditions of the query?

  I can get the total number of records directly the request of the meeting of the conditions of CLI using the command Global table - name tableName - count - index index-name-field fieldName - start startValue-end endValue.

  Can I get the same results using the Table API?

  I used MongoDB and NoSQL Oracle for about a year. According to the experience of the use of these dbs, I think mongoDB querying interface is powerful. In the contras, the query interface is relatively simple, which results is a lot of work that is usually a long time in the client side.

  Hello

  Counting records in a database is a tricky thing.  Any system that gives you an accurate count of the records will have a hotspot of concurrency on updates, namely the place where the counting is maintained.  Such a count is a problem of performance in addition to competitive access problem.   The problem is even more difficult in a system widely distributed such a NoSQL database.

  The CLI has overall command that counts, but does so by brutal force - iterate keys that correspond to the parameters of the operation.  This is how you must do this within the API.  There is not a lot of code, but you have to write.  You certainly want to use TableIterator TableAPI.tableKeysIterator (), because a key iteration is significantly faster than the iteration of lines.  Just one iteration and count.

  If you use TableAPI.multiGet () and a key with a touch of brightness full then, in fact, count the results as they are returned in a single piece (a list).

  Kind regards

  George

• Calculate the values in the table

  I have a table with several lines. have 2 input text in each row of the table. In the same vein, there is a field (outputText) whose calculation is based on the insertion of data from the other two.

  the calculation is performed correctly.

  the problem occurs when I have more q a row in the table. If you have 3 lines, for example, are calculated for a line (not being not not the first) to the other lines that this field is null / empty.

  I think that it does not have the iterator. Anyone help me?

  Hi user,

  Calculate the difference using the class viewrow for more information

  Look at the blog below could help ful

  Andrejus Baranovskis Blog: Column calculated in ADF Faces component af:table

• help create dynamic measures to calculate the total amount in the form of tabluar

  Hello world

  We using apex 4.2 and start re-writing some existing applications originally designed in 3.0.   I was wondering if someone could help me with the following scenario.

  I have a tabular presentation several recording based on a collection called "species_collection".  The form allows fisherman to create an electronic ticket which contains one species, quantity, price, total of the amounts and other descriptive information on the species.  I created a dynamic action (with lots of help from this forum) to automatically update the collection when a field is changed.

  I am now in the hope of creating a dynamic action that will automatically do the following:

  • When the quantity is changed, recalculate the total of the amounts as quantity * price
  • When the price is changed, recalculate the total of the amounts as quantity * price
  • When dollars changed, recalculate the $ amount/total price.
  • When the total amount is changed, recalculate the OVERALL TOTAL

  Currently, I use embedded calls to javascript and then to application processes... but they are difficult to debug, and it seems that dynamic action could be cleaner and simpler.

  the current request is (I've included the concerned fields because it is an important application):

  SELECT
  apex_item.text(1,seq_id,'','','id="f01_'||seq_id,'','') "DeleteRow",
  seq_id,
  seq_id display_seq_id,
  .....
  apex_item.text(10,TO_NUMBER(c010),5,null, 'onchange="setTotal('||seq_id||')"','f10_'||seq_id,'') Quantity,
   
  apex_item.text(11,TO_NUMBER(c011),5,null,'onchange="getPriceBoundaries('||seq_id||')"','f11_'||seq_id,'') Price,
  
  apex_item.text(12, TO_NUMBER(c012),5,null, 'onchange="changePrice
  ('||seq_id||')" onKeyDown="selectDollarsFocus('||seq_id||',event);"','f12_'||seq_id,'') Dollars
   ......
  from apex_collections
   where collection_name = 'SPECIES_COLLECTION' order by seq_id 
  

  each field, QUANTITY, PRICE, $ has an ONCHANGE that then call the application processes that update the collection.

  <script language="JavaScript1.1" type="text/javascript">
  
  function setTotal(row)
  {
     //quantity was entered into form, get values
     var price = $x('f11_'+row);
     var total = $x('f12_'+row);
     var quantity = $x('f10_'+row);
     var nquantity = parseFloat(quantity.value);
     var ntotal;
     var nprice;
     nquantity = nquantity.toFixed(3);
     quantity.value = nquantity;
     //if quantity and price both have values calculate total and save
     if(quantity.value > 0 && price.value > 0)
     {
        ntotal = quantity.value * price.value;
        total.value = ntotal.toFixed(2);
     }
     else
     {
           //if quantity and total both have values calculate price and save
        if(quantity.value > 0 && total.value > 0)
        {
           nprice = total.value/quantity.value;
           price.value = nprice.toFixed(6);
           //check to see if the price entered falls within min/max for that species
           var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=PriceBoard',0);
           get.add('SPECIESPRICE',price.value);
           get.add('SEQUENCEID',row);
           gReturn = get.get();
           if ((gReturn == 'Price entered is too high') || (gReturn == 'Price entered is too low')){alert(gReturn);}
        }
        else  if (quantity.value > 0)
                 total.value = '';
              else
              { 
                   total.value = '';
                   quantity.value = '';
              }
     }
    //saveQPD(row);
     setOverallTotal(); 
  }
  function setOverallTotal()
  {
     var total = 0;
     var nTotal;
     for(i=1;i<=rowCount;i++)
     {
        if(parseFloat($x('f12_'+i).value) > 0)
        {
           total = total + parseFloat($x('f12_'+i).value);
        }
     }
     ntotal = total.toFixed(2);
     document.getElementById("P110_TOTAL").value = ntotal;
     var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=nullProcess',0);
     get.add('P110_TOTAL',ntotal);
     gReturn = get.get();
  }
  function getPriceBoundaries(row) 
  {
     //price was entered into form get all values
     var quantity = $x('f10_'+row);
     var price = $x('f11_'+row);
     var total = $x('f12_'+row);
     var ntotal;
     var nquantity;
     var nprice = parseFloat(price.value);
     nprice = nprice.toFixed(6);
     price.value = nprice;
     //check to see if the price entered falls within min/max for that species
     var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=PriceBoard',0);
     get.add('SPECIESPRICE',price.value);
     get.add('SEQUENCEID',row);
     gReturn = get.get();
     if ((gReturn == 'Price entered is too high') || (gReturn == 'Price entered is too low')){alert(gReturn);}
     //if quantity and price both have a value calculate the total
     if(quantity.value > 0 && price.value > 0)
     {
        ntotal = quantity.value * price.value;
        total.value = ntotal.toFixed(2);
     }
     else
     {
        //if total and price both have a value calculate the quantity
        if(total.value > 0 && price.value > 0)
        {
           nquantity = total.value/price.value;
           quantity.value = nquantity.toFixed(3);
        }
        else
        {
           if(price.value > 0)
                total.value = '';
           else
           {
                total.value = '';
                price.value = '';
           }
        }
     }
     saveQPD(row);
     setOverallTotal();
  }
  function saveQPD(row)
  {
     var quantity = $x('f10_'+row).value;
     var price = $x('f11_'+row).value;
     var total = $x('f12_'+row).value;
     //save quantity
     var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=setQuantity',0);
     get.add('SETVALUE',quantity);
     get.add('SEQUENCEID',row);
     gReturn = get.get();
  //   alert(gReturn);
     //save price
     get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=setPrice',0);
     get.add('SETVALUE',price);
     get.add('SEQUENCEID',row);
     gReturn = get.get();
  //   alert(gReturn);
     //save total
     var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=setTotal',0);
     get.add('SETVALUE',total);
     get.add('SEQUENCEID',row);
     gReturn = get.get();
  //   alert(gReturn);
     
  }
  function changePrice(row)
  {
     //total was entered get all rows
     var quantity = $x('f10_'+row);
     var price = $x('f11_'+row);
     var total = $x('f12_'+row);  
     var ntotal = parseFloat(total.value);   
     var nprice;
     var nquantity;
     ntotal = ntotal.toFixed(2);
     total.value = ntotal;
     //if quantity and total were entered calculate price.
     if (quantity.value > 0 && total.value > 0)
     {
        nprice = total.value / quantity.value; 
        price.value = nprice.toFixed(6); 
        var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=PriceBoard',0);
        get.add('SPECIESPRICE',price.value);
        get.add('SEQUENCEID',row);
        gReturn = get.get();
           if ((gReturn == 'Price entered is too high') || (gReturn == 'Price entered is too low')){alert(gReturn);} 
     }
     //if price and total were entered calculate quantity.
     if (price.value > 0 && total.value > 0)
     {
        nquantity = total.value / price.value;  
        quantity.value = nquantity.toFixed(3);
     }
     if (price.value > 0 && quantity.value > 0)
     {
         ntotal = quantity.value * price.value;
         total.value = ntotal.toFixed(2);
     }
   
         
     saveQPD(row);
     setOverallTotal();        
  }
  
  function selectDollarsFocus(pRow,event)
  {
      tabPress = 0;
      KeyCheck(event);
      if($x('f11_'+ pRow))
      {
              if(KeyID == 9)
              {
                  $x('f14_'+ pRow).focus();
                  onFocusAreaFished(pRow);
                  tabPress = 1;
              }
      }
      else
      {
          if($x('f18_'+ pRow))
          {
                  if(KeyID == 9)
                  {
                      $x('f18_'+ pRow).focus();
                      tabPress = 1;
                  }
          }
          else
          {
              if(--pRow <= rowCount)
                  if(KeyID == 9)
                  {
                      $x('f08_'+ pRow).focus();
                      tabPress = 1;
                  }
          }
          
      }
  }
  
  
  
  </script>
  

  I'm not very familiar with javascript... but looks like there must be a simpler way.   Any thoughts on how I could address the issue?   Thank you!

  I have it.  trial and error.

  the DYNAMICS of the evolution of prices and the $ action are now two separate dynamic actions.

  Action DYNAMICS to update the column from the collection is now last... and it seems that everything works... until I have change something again.

  Thanks again for your help.

  Karen

• Running Total and partial in the tables in the ADF

  Hi, I use Jdeveloper 11.1.2.3.0...
  
  Please I just discovered the ADF table subtotal and total function in oracle Docs, but it does not specify the steps on how to do this... Im not a pro, so please if anyone has a link or a link to a tutorial or can tell me the steps to take in order to accomplish the subtotal and total in my table from the ADF, I'll be very grateful.
  
  I await your response.
  Thank you
  
  OBYYS

  http://www.techartifact.com/blogs/2012/11/ADF-Groovy-for-total-sum-of-a-column-in-a-table.html

• Total space occupied by the table of tablespace

  Hello
  
  I'm looking for information find the total space occupied by a table stored in a tablespace. We can consider a scenario in which the table has data present in it, constraints, indexes, LOB columns and free space left on the total, that it has been allocated. I tried two queries, but don't think they give me what I'm looking for.
  
  Select bytes from WHERE user_segments where nom_segment = "EMPLOYEES";
  
  SELECT
  lower (owner) as the owner
  lower (table_name) AS table_name
  nom_tablespace
  num_rows
  , blocks * 8/1024 AS size_mb
  pct_free
  compression
  logging
  From all_tables
  Owner WHERE AS UPPER ('HR')
  AND table_name = 'EMPLOYEE '.
  ORDER BY 1, 2;
  
  Basically, I need to get this information before executing some DML is on the table, after which, I'll check once again how much space is free after the operation. So kind to provide information to customers on space used and released for a table in a tablespace.
  
  Now how do I go around to find the total space occupied by the table combining the factors mentioned above.
  
  
  Thanks in advance.

  Your queries refer to the segment info.

  Here's how

  create or replace procedure segments_for_table(p_table in varchar2, rc in out sys_refcursor) is
  begin
  open rc for
  select l.table_name,s.segment_type,s.segment_name, s.bytes/(1024) kb
  from user_segments s, user_lobs l
  where l.table_name=p_table
  and s.segment_name=l.segment_name
  union
  select i.table_name,s.segment_type,s.segment_name, s.bytes/(1024) kb
  from user_segments s, user_indexes i
  where i.table_name=p_table
  and s.segment_name=i.index_name
  union
  select t.table_name,s.segment_type,s.segment_name, s.bytes/(1024) kb
  from user_segments s, user_tables t
  where t.table_name=p_table
  and s.segment_name=t.table_name;
  end;
  /
  

  -------------
  Sybrand Bakker
  Senior Oracle DBA

• How to calculate the total memory used by oracle under Linux?

  Hi all
  
  In one of my server have 148 GB of total physical memory and 12 databases are running. For capacity planning, I need to know how the Oracle server use.
  
  How to calculate the use oracle database? I was perplexed because Yop out his show off 148 gb 128 GB are used.
  
  Below for your reference:
  ++++++++++++++++++++
  == > back to top
  top - 09:52:32 up to 151 days, 15:20, 3 users, load average: 6.11, 6.00 6.05
  Tasks: 7 running, 1314, 1321 total sleep, stopped 0, 0 zombie
  CPU: 37.8%us, 1.4%sy, 0.0%ni, 55.0%id, 5.6%wa, 0.1%hi, 0.2%si, 0.0%st
  MEM: 148290444 k total, 129368792 k used, 18921652 k free, 1450292 k buffers
  Swap: 50331632 k total, 1296188 k used, 49035444 k free, 114733336 k cached
  
  
  The memory allocated to each instance is: sga total == > 34 pga = > 48 GB gb
  +++++++++++++++++++++++++++++
  
  SGA PGA
  4 GB 4 gb
  4 GB 4 gb
  2 GB, 4 GB
  2 GB, 4 GB
  2 GB, 4 GB
  2 GB, 4 GB
  2 GB, 4 GB
  3 gb 4 gb
  3 gb 4 gb
  4 GB 4 gb
  3 gb 4 gb
  3 gb 4 gb
  
  Thank you

  Try this - http://www.pythian.com/news/29703/oracle-instance-memory-usage/ for each of your instances.

  As far as I know, different instances may share only the binary code oracle and using libraries, so you should be able to easily understand the amount of memory of all instances of 12.

  Lordane Iotzov
  http://iiotzov.WordPress.com/

• How can I calculate the total time in java?

  Hello!
  
  I need to calculate the total time!
  
  For example I start time:
  Format formatter1;
  Date date1 = new Date();
  formatter1 = new SimpleDateFormat("hh:mm:ss");
  Dim startTime = formatter1.format (date1);
  startTime = "14:20:40.
  
  And I have finishing time:
  Format formatter2;
  Date2 date = new Date();
  formatter2 = new SimpleDateFormat("hh:mm:ss");
  String finishTime = formatter2.format (date2);
  finishTime = '08:30:55;
  
  
  
  Also, having calculated manually, I get the total time: '18:10:15.
  
  How can I calculate the total time in java? (Using formatter1 and formatter2 I guess)
  
  What I need is to print 'total 18:10:15 '.
  
  Thank you!

  800512 wrote:
  I did the following, but I think something's wrong here:

  I've defined before: Date date1 = new Date(); Date2 date = new Date();
  And it should be exactly 5 seconds between them.

  I found the delta between date1 and date2:

  Format formatter = new SimpleDateFormat("HH:mm:ss");
  timeInMilliFromStart long = date1.getTime () - date2.getTime ();
  Date date3 = new Date (timeInMilliFromStart);
  String timeInSecFromStart = formatter.format (date3);

  and I still get
  timeInSecFromStart = 02:00:05

  But it should be exactly 00:00:05.

  What is a problem?

  Because, as I said, a Date to measure a moment in time, not a period. So when you have 5000 ms, and you that transform a Date, this means that 5 seconds after the time, which equals 00:00:05.000 01/01/1970 GMT.

  As I said, if you are not currently in GMT, then you must set the DateFormat GMT TZ. Right now, it's to show you the time in your TZ. If you have included the date in your SimpleDateFormat, you would see the 01/01/1970 or 31/12/1969, function that TZ you find.

  Bottom line: you try to use these classes in a sense they are not intended for, and while you can get the results you want for a limited set of entries if you understand how these classes and how to work with it, it is a fragile approach and comes with all sorts of warnings warning.

• How to calculate the Total price based on a rate of m² with different prices?

  Hello

  I'm guessing that it is a script, but I've never done any script so I would like to ask you guys...

  I have a form where I would calculate the total price for some carpet based on the price per sqm.

  -L the user enters the number of carpet needed.

  -There are different price points for 1-20, 21-60, 61 + m² (each with their own hidden field that contains the value of awards).

  -The Total Price field evaluates the relevant quantity and multiply by the square metre rate.

  Is it achievable?

  I guess that all solutions are placed in the "Custom calculation Script" field too?

  Thanks in advance!

  Yes. You can use something like this, as the custom of the price field calculation total (you may need to adjust the domain names):

  var sqm = Number (this.getField("SQM").value);

  rate of var = 0;

  If (sqm > 0 & m²)<=20) rate="">

  ElseIf (> 20 sqm & m²)<=60) rate="">

  ElseIf (> 60 sqm) rate = Number (this.getField("Rate3").value);

  M² = Event.Value * side;

• Calculate the total

  Guyz,
  
  I have a tubular block where I want to calculate the total fields Horizontallay in well vertically, as shown in the record of the image below.
  
  http://www.imagehousing.com/image/921042
  
  Vertical total is OK, but how do I display total horizontally?
  
  or should I take write the sum (item_code) in POST_QUERY of trigger? someone help me solve this problem.
  
  Thanks in advance.
  
  Concerning
  
  Houda

  Houda,

  You want to get the total of each record in the DIS_TOT field, right?

  for this just to give in the formula column

  NVL(:BLOCK.) CONSULTATION, 0) + NVL(:BLOCK.) LABORATORY, 0) + NVL(:BLOCK.) DENTAL, 0) + NVL(:BLOCK.) COUNTERFEITS, 0) + NVL(:BLOCK.) OTHERS, 0)

  Then it will be OK.

  I hope this helps.

  Kind regards

  Manu.