Calculation of field not updated - Javascript problem

Similar Questions

• Dynamic text field not updated to actionscript in the 2nd Frame

  I have a clip with two frames. In the 2nd frame there is a clip that has a text field.

  My goal is to some events that I will be proposing to the frame that has the clip with the text field.

  I'm trying to update the text field with a code something like: -.

  public void updateTxtFld(e:Event)

  {

  My goal is to certain events show the clip with the text field

  questBG.gotoAndStop ("glow");

  arrowText.text = "of the text." arrowTextt has been awarded with the correct text field

  }

  After some time I again back to the framework that has no movie clip masking so the clip

  public void masquer()

  {

  questBG.gotoAndStop ("idle");

  }

  The text field not updated since the actionscript code even if trace (arrowText.text) shows the updated value.

  Now, if I remove the clip of frames & change the updateTxtFld() as

  public void updateTxtFld(e:Event)

  {

  (questBG.getChildByName ('arrowBG') as Sprite) .visible = true;

  arrowText.text = "of the text." arrowTextt has been awarded with the correct text field

  }

  Then it works very well with the updated text in the text field. It seems that there seems to be a problem in dynamic text field update in frames.

  I also checked that the incorporation of text is fine in both cases

  I created the FLAS using CS Professional 5.5 & I am trying to change the text field using actionscript running in Flex Builder 4.7.   Let me know if I need to send the fla (working and non-working version).

  you are the assignment of text to arrowText before the timeline then moves to "shine".

  Use the render event to assign the text:

  public void updateTxtFld(e:Event)

  {

  My goal is to certain events show the clip with the text field

  questBG.gotoAndStop ("glow");

  internship. Invalidate();

  this.addEventListener (Event.RENDER, assignTextF);

  }

  function assignTextF(e:Event):void {}
  arrowText.text = "of the text." arrowTextt has been awarded with the correct text field
  }

• The first graphing calculator HP will not update. Stuck at x 2 + y2 = 1

  I tried to update my brand-new first HP Calculator graphic using a version update of the HP connectivity Kit.  The update failed and the calculator will reset but not exceed x 2 + y2 = 1.  I tried to use the following manual method of a post on Educalc and the usbtool will not load the update.  ANY HELP, PLEASE!

  Of HP first Firmware update manual

  1 download the firmware files and unzip into a folder

  2 wipe Calculator (optional)
  a grip on the keys of F, C and O while resetting calculator
  b to the menu, press 4.3, then enter
  c when the format is complete, go to step 3

  3 given to zero Calculator (back button) while holding the button "Symb".
  (poster or screen update tool ARM or recovery mode)

  4. connect the computer using the USB cable
  (wait of recognize the device USB)

  5 run usbtool.exe

  6 select the check box 'Auto update '.

  7. click on the button "Update".
  (blue bars will show that the unit is updated)

  8 calculator reset

  Note: If a step fails, please proceed to step 3

  Please, do not update your HP Premium using Parallels on a Mac Desktom.  I tried and the drivers of USB Port would not allow the update completed successfully using HP Connect, the Update.exe program or the application of usbtool.exe.  I managed with the help of an old laptop on XP using the USBTool.exe application using a native PC environment.

  I will say that I am running OS X 10.10 Mavricks Beta 2 on my MAC, but I don't think it's a problem, although I will know Parallels.

  If you use a MAC, borrow a PC (ugggh) to update your first HP.

  NOTE: the usb tool is displayed as part of the ROM for HP Premium updates on educalc.com at: http://www.educalc.net/2336439.page

  David

• Why isn't the AWS_ACTION process field not updated by the action of the user in the workspace in a PDF file?

  I have a PDF (not XDP) form that is routed in the workspace for a number of reviewers.  The shape has built-in validation in the preSubmit form that validates the various fields according to the measure taken and where the form is current.  I added 2 user Actions (Submit and save the draft) in the assign task operation.  The buttons are displayed in the workspace as expected.  When the user clicks on I want to put a variable in the PDF file that I can use to understand what to validate.

  I proceeded fields and form bridge on the first page of a 2 page form.  When the user clicks on the user's Action in the workspace the AWS fields are updated with the exception of AWS_ACTION.  AWS_ACTION is never updated with the name of the Action for the selected button.  AWS_CHOICE has a valid list of action names.

  If I use a field AWS_ACTION XDP file is updated correctly.  There are a number of signature in the process so that I have to keep the PDF file.  AWS_ACTION works correctly with PDF files or I have something set configured?

  We use the ES4.

  I do not have a server at home, in the office and so I worked the example I

  will not be able to send ACL, but I cannot send the xfa form.

  Greetings-

  Ashok

• Java will not update; installation problem

  Java will not update; cannot install acess

  Have you tried to uninstall Java and then put it back.

  How to uninstall Java on my Windows computer?
  http://www.Java.com/en/download/uninstall.jsp
  This article applies to:
  Windows 7, Vista, Windows XP, Windows 2000, Windows 2003
  Java version (s): all Versions of Java

  J W Stuart: http://www.pagestart.com

• Calculation field not updated until I add something?

  Hello

  I created a PDF form to act as a purchase order.

  Each line has a number of product, product name, quantity, unit price and total based on how I buy. The calculation of the total price works very well at the end of each line.

  However, at the bottom of the last column (total price), I have a total cost field, which is the final cost of all (sum of all fields in the total price).

  The problem is the field on the bottom (total cost), do not accept the last calculation that I do in the last row. I have to start a fake in the following line, and then delete this one to get the total to be correct? In other words, the last line, fill, never gets added to the Total cost? I tried to click on the Enter key or return or Tab... but nothing. I have to add an amount of false to the line right underneath the last of them to get the last calculation to add to the total.

  Is it possible to add some sort of field validation button so that when I did it and I hit him, the total final is available in? Other wise, I will add that amount wrong number, press tab, then the total is good and I have to remove it. Seems very strange... has anyone else had this happen to them?

  Thank you!

  Babs

  The field calculation order is incorrect. Set it to anything that makes sense for your form. In Acrobat 9, go into editing mode and select forms: forms > edit fields > Set field calculation order...

• Adding field not updated

  I have a dynamic page and a table.  The table has a button to add additional lines.  There is an entire section on this table that uses a 'for' to sum up the values of one of the columns.  I have a button that when you press copy page, which also then creates a new instance of the table.

  When I add a page via the button, it inserts properly.  The problem is that if I have x rows in the first table and > x lines in any other tables, the warning box will add the first x lines additional tables.  Basically, I think that the 'I' variable is used from the first table.  Work is about to add extra empty rows in the first table to increase the value i, however, this only helps prove the problem and does not provide a solution.  I was curious to know if anyone might know how to solve this problem.

  Thanks in advance,

  Mallard27

  There is a trend to more complicated tables have been created to behave like spreadsheets. FormCalc is an extremely powerful tool that addresses these problems very well and above all, easily.

  For example, consider a footer line and a calculated - read only the field called "fixedCostTotal."

  Form1.Page1.Subform1.table.footer.fixedCostTotal::calculate - (FormCalc, client)

  $.rawValue = sum (form1.page1.subform1.table.row [*] .fixedCost)

  Take a look at the socket and see if it helps.

  Steve

• Windows Update is still at 0% download, MSE does not, update any problems to connect to Microsoft's servers?

  I just installed windows 7 on my laptop and my desktop computer. My laptop works 100% fine without any problem at all. However my office is struggling to download updates via both windows update and to Microsoft essentials security.

  The State of windows update is still ' Windows is downloading updates (all 0%). "and never changes.
  Microsoft security essentials tray status is 'Check updates', and when I restore the window it says "search...". ", but no progress beyond this point. The MSE has only been going on for about a day now, but the Windows update thing has happened since pretty close to the installation.
  I don't know if that helps, but initially I think downloading an update, then remained in the thing of locking system, to the "installation 1 of 4 do not unplug the computer" for 8 to 10 hours, so at that point, I had to disobey microsoft and reset the computer.
  Any help would be appreciated.

  Hello

  References to Vista also apply to Windows 7.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Field not updating machines (Small Business Server 2011) Windows 7

  A few months, I have removed my "companyweb" of my SBS2011 box. Since that time, my domain name will not be updated. I can manually delete the files from my desktop PC (c:\windows\softwaredistribution\data) and run an update. What could have changed by removing the default site?

  Also because I'll eventually replace the box SBS2011 with Windows Server 2012 or 2016 I simply forget to the SBS Group Policy?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Not all fields not wiring updated to a bundle as input to a Subvi argument

  Hello

  I have a big bundle of data that I use to connect between my SubVIs, each Subvi manipulates some fields in this bundle and should send the bundel updated.

  Let's say my Bundel has 20 fields in one of the SubVIs only 2 of these fields are updated and everything will keep the current values. At the end when the Subvi sends the package up-to-date, it must bundel updated and fields not updated together.

  All these fields not updated, to the output wiring made a mess in Subvi and needs a lot of wiring that isn't so smart!  using a local variable also needs an extra unbundeling and rebundeling.

  I was wondering if there is a smart way of handeling this question without wiring so.

  Concerning

  Afshin

  A picture is worth a thousand words they say.

  

  Zinnium,

  As Ben said, the best way to do this is with the bundle name. Why use the Bundle/Unbundle and all these threads?

• Order form does not update grand total calculation until I have indicate a number on the next line.

  I created a purchase order with a "quantity" column, a column of job description, a unit price column and a point $ column total. I've set the total column of $ point to calculate automatically once a quantity and unit price entered, and it works immediately once the unit price and quantity entered. But my grand total at the bottom of the total column $ is set to calculate all the lines of total $ point, but the total general don't not updated to reflect the $ total for a given line (e.g. line B) until I have begin to type a number for the next line (e.g. line C). So, I always end up having to create a line of extra reserved space with a quantity of 0, just to get my total general to update. Is there a way to fix this?

  It is most likely a problem with the calculation of field order. You must ensure that the total is calculated after row grand totals.

  This can be set in form editing mode, under the order of computation of Set field - other tasks.

• Date field will not update

  Apex using pre-packaged "Group calendar" app I work on page 10. I updated the form to include a custom date field and added all the code to the EBA_ca_api package

  My problem is that my custom date field will not retain the value on the edition of an event. I have other custom fields that are not date fields (field numbers and text) that update without any problem...

  How can I update my date fields?

  Update:

  I am sure that the issue is somewhere in the package, the values are not updated for some reason any.

  The pre-existing app code uses this statement

  If to_char()c1.event_date_time,' DD-MON-RRRR HH:MIam ') ! = TO_CHAR ()p_event_date_time ' DD-MON-RRRR HH:MIam '( ) then

  Update EBA_ca_events

  set event_date_time = p_event_date_time

            where event_id = p_event_id ;

        end if ;

  
  

  and it works for this field when updating. I tried to use this code on my custom date field and it didn't work, so now I'm looking for something like this

  if TO_CHAR (nvl(c1.event_due_date,'0')) ! = TO_CHAR (nvl(p_event_due_date,'0')) then

  Update EBA_ca_events

  set event_due_date = p_event_due_date

             where event_id = p_event_id ;

  end if ;  -Copy the following code causes an error when you try to apply changes (not a month valid)

  
  

  Because the following code works and updates to my date no fields

  
  

  If nvl(c1.event_not1,'0')! = nvl(p_event_not1,'0') then

  Update EBA_ca_events

  Set event_not1 = p_event_not1

  where event_id = p_event_id;

  end if;

  Does the code work if I'm on the right track? -At the end of the day what I'm trying to do, it is to be able to add a date field for the application of group calendar pre-packaged on the creation form and event on page 10, and then later change this event and updated it to the database.

  
  

  Richie V wrote:

  No I did not, but do you know how to fix the error happen and allow the new field custom_date to be edited and saved in the database?

  Thereafter. The missing pieces of the puzzle were the type of the values concerned was TIMESTAMP WITH LOCAL TIMEZONE, and that type conversion had already been made in the process of page APEX. Therefore, the required code in the package:

  -- custom date code
  
  if nvl(to_char(c1.custom_date,'DD-MON-RRRR HH:MIam') , 'X')!= nvl(to_char(p_custom_date,'DD-MON-RRRR HH:MIam'), 'X')
  then
      update EBA_ca_events
      set custom_date = p_custom_date
      where event_id = p_event_id;
  end if;
  

• Form is not updated once the fields in Adobe Reader XI

  I created a form in Acrobat X Pro has a lot of radio buttons, the user must select. The last page is the results page, which has the code JS that is executed when you enter the page. If I test the form in Acrobat X, the results page correctly updates the fields of results as soon as you enter the page.

  But if I open the page in Adobe Reader XI, the fields in the result page will not update until I save the page. This has happened before, forms behave the same in Acrobat and Reader. I also tested the forms created months ago and got the same result.

  Anyone know what is happening here?  Thank you.

  Yes, you can do everything from a single calculation script.

  Using the option Page Open should work as well, it's just an unusual way

  do...

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• docscanHD app does not update on my iPad. Developer says that I have to ask Apple. How can I solve this problem

  I bought DocscanHDpro and every time they do a software update, that it will not update. I asked the company that made the software and they me sent back to Apple. I'm on the last iOS for iPad. Someone knows how to solve this problem of update.

  It works if you remove the application then it re-download?