Calculation on the hierarchy of Member custom

Similar Questions

• Calculation of the percentage formula Member

  I have a dimension of data type in an OSI application that is used to calculate adjustments to historical data. It is a dimension Label with only 3 members:

  Historical value

  Adj %

  Calculated Wo (dynamic member)

  Where I placed the following member formula in CalculatedAdj: CalculatedAdj = HistoricalValue * % Wo

  When validating the foregoing formula, I get the following error message "compilation error formula for [] (line 1): invalid assignment."

  I'm guessing that the formula is too simple and other parameters must be included, but I'm at a loss as to what they are. I appreciate your help.

  Hello f. Arabak

  If your synatax is exactly what you have written, then try this

  "CalculatedAdj" = "HistoricalValue" * "Wo % ';

  The special character needs quotation marks.

  He was missing the semicolon.

  Kind regards

  Philip Hulsebosch

• the difference between the form of Member or a calculation Script?

  Hello
  I am going through some assignments. Here I observerved in essbase we can do the calculation using the calculation Script or a member form.
  
  I know, Member we can write to any Member, it is only for that perticular in outline and stored in outline members. and calculation for any database stored Extornally script.
  
  A fully written BSO formula was 1242 lines and i.e.formula 75 493 bytes size less than 64 KB. It is the limitation of the formula of Member, is their any other difference apart from that, because of this we can use the calculation on the Member form script or if anything else, so, please let me know.
  
  
  So could you tell me:
  When use the formula of Member and what is the advantage of the Member, or when to use the calculation for calculation script?
  
  What is the best option that I'll go for formula script or calculation of Member?

  A few comments based on the response of SS1988.
  1 unary (contour) calculations are the fastest type of calculations.
  2 many if not most of the formulas of Member are performed on dense dimension as dynamic calculations (and sometimes sparse dimensions) these work really well especially for type ratio calculations where you would have to calculate at each level of the database. The best formulas will make only reference members in the same block because they are quicker to run. Complex formulas can be slow.
  3. calculation scripts you give the most flexibility you can do calculations procedures (followed by B Calc calc A do) and you can limit the scope of a calculation using the patch and if statements

• How to use the hierarchy of position for approval workflow custom?

  Dear all,
  
  I created a custom workflow that is triggered whenever develops a new provider site.
  Now, I want to add the trust hierarchy in this stream. To do this, I want to use the hierarchy of the Position.
  
  I didn't find useful resources to do so. Can you help me please?
  
  Kind regards
  Natasha

  Salvation;

  Please check:
  Adding a custom Workflow process [ID 374930.1]

  Respect of
  HELIOS

• How do I create a custom calculation for the portion of the tax of a subtotal field?

  The calculation must be the number x 3 divided by 23 (for example 100 x 3 divided by 23 = 13.0435). I think we should have code written for it, but I don't know what it should be, and how I should do this.

  You have really no code. Use Simple field Notation (the

  a second) the calculation of the target on the field tab and enrolled him

  (Assume the name of the field that contains the number of variables is

  Text1):

  Text1 * 3 / 23

  The game, may 12, 2016 at 06:05, justineh55480397, [email protected]>

• Calculation of the value of ready for a custom time period

  Hello

  article (*) and some other sites describe how to calculate the percentage value of the ready time for the periods of time given (in real time, (day, week, month and year).

  States KB:

  There is a shortcut, you can use the following formulas for the intervals to update chart by default to get the loan % CPU:

  • Real-time: value of summons processor / 200
  • Last day: value of summons UC / 3000
  • Last week: value of summons UC / 18000
  • Last month: value of summons UC / 72000
  • Last year: value of UC summons / 864000

  But it is also possible to obtain the divisor for a custom time period?

  for example if I choose the period of 14.10.2013 - 14.10.2013 08:00 - 10.00. The period is 2 hours. But what is the divisor and how to calculate it for other periods?

  Any help would be greatly appreciated,

  Chris

  (*) VMware KB: conversion between the summation of values CPU and CPU ready %

  It depends on what adjustments to custom value data.

  for example. If the custom vale was spent time maintaining real so in your example it is 2 hours and then he gets back in the daily data, it would be in 5 min data points.

  same goes if my custom value went for 2 days, it will be so in the past set of data of the week etc. It does not display some of them in every week and then some in every day.

  BTW, the numbers you cited have an extra 0 on the end of each

  See you soon

• calculation of Salary to the top or to the bottom of the hierarchy

  Hello all,.
  
  How to get the total salary wound of lower level to a higher level of the hierarchy?
  
  We can get the hierarchy of the employee and the salary of hr.employees table using the suite of applications:
  

  select level, last_name, salary
  
  from hr.employees
  
  start with employee_id = (select employee_id
  
                                       from  hr.employees
  
                                       where manager_id IS NULL
  
                                      )
  
  connect by prior employee_id  = manager_id

  How to get the salary rolled up to a higher level with sql as follows?
  

  level      last_name        salary        total salary
  
  
  
  2         Kochhar           17000          109800
  
  3         Whalen              4400            4400
  
  3         Mavris                6500            6500
  
  3         Bae                 10000           10000
  
  3         Higgins             12000          20300
  
  4             Gietz              8300           8300
  
  3         Greenberg        12000          51600
  
  4            Faviet             9000            9000
  
  4            Chen              8200            8200
  
  4            Sciarra            7700             7700
  
  4            Urman            7800             7800
  
  4            Popp              6900             6900 

  Here all level 4 level 3 Greenberg rolled up to level 3, then level 4 under Higgins rolled up to level 3, then all the level 3 under Kochar wrapped at level 2.
  
  Is it possible in sql?
  
  Thanks for your help.
  
  Edited by: rxshah May 14, 2010 03:45

  (B-)

  select level, last_name, salary,
  (select sum(b.salary) from hr.employees b
   start with b.employee_id=a.employee_id
   connect by prior b.employee_id  = b.manager_id)
  from hr.employees a
  start with employee_id = (select employee_id
                                       from  hr.employees
                                       where manager_id IS NULL
                                      )
  connect by prior employee_id  = manager_id;
  

• Calculations of the rate of aggregation in essbase ASO SEEP cubes

  The question (limitation to ASO) we tried to find a solution/workaround. ON PBCS (Cloud)
  

  Details of the application:

  
  Application: type of ASO in cloud Oracle planning 11.1.2.3 (PBCS) application

  
  Dimension : Total 8 dimensions. Account to the dynamic hierarchy. Remaining 7 dimensional hierarchies Stored value. Only 2 dimensions have about 5000 members and others are relatively small and flat hierarchies.

  Description of the question of the requirement: We have a lot of calculations in the sketch that use amount = units * rates type of logic. The obligation is such that these calculation logic should apply only to the intersections of Level0 and then data resulted must roll up (down) to the respective parents across all dimensions. But when apply us this hierarchical logic / formula calculation to ASO, the logic(i.e.,amount=units*rate) of calculation is applied at all levels (not only the leaf level) of remaining dimensions. Here, rates are also numbers derived using the formula MDX.

  Some of the options explored so far:
  Option1: This is an expected behavior in ASO as all stored hierarcies are calculated first, then the dynamic hierarchies. So we tried to change the formula for each of the calculated members to explicitly summarize data at parent levels using algorithm as shown below.

  IF (Leaf Level combination)
  amount = units * rate
  Else / * for all levels parents * /.
  Use the function sum adding up the amounts between the children of the current members of dimension1, dimension2 and so on.
  End

  Result: Recovery works through the parents for a dimension. When the summary level members are selected in 2 or more dimensions, the recovery freezes.

  Option2: Change the type of hierarchy to group all the dimensions to "Dynamic" so that they calc after account (i.e. after amount = units * rate runs at intersections Level0).

  Result: Same as option 1. Although the aggregation works through one or 2 dimensions, it freezes when the summary level members are from many dimensions.

  Option3: ASO use custom Calc.
  We created a custom calc by fixing the POV Level0 members of any size and with the amount of formul = units * rate.

  Result: Calc never ends because the rate used is a dynamic calc with formula MDX (which is needed to roll forward rates for a specified period at all the following exercises).

  If you could get any help on this, it would be a great help.

  
  

  Thank you and best regards,

  Alex keny
  

  
  

  
  

  Your best bet is to use the allocation of the ASO, what difference does make. (one ton)

  There are a few messages blog out there that can help you meet this goal. (including mine), the trick is to create a member calculated with a NONEMPTYMEMBER in the formula

  Then it will be a member with an inside MDX formula

  NONEMPTYMEMBER units, rates

  Units * rates

  Now, make a copy of data (allocation) of this member-to-Member stored.

  http://www.orahyplabs.com/2015/02/block-creation-in-ASO.html

  http://camerons-blog-for-Essbase-hackers.blogspot.com/2014/08/calculation-Manager-BSO-planning-and.html

  Concerning

  Celvin Kattookaran

  PS I found NONEMPTYTUPLE does not and still used NONEMPTYMEMBER

• Formula to return the name of the hierarchy to another node

  People,

  I thought it would be easier explained with a mock excel upward. I hope you understand.

  Background:

  Two hierarchies are ministries, the two beeding seeded in diferent target system.  When a new Member is added in the TFTP hierarchy, she also will be added to the hierarchy of Essbase, but with a different number. Custom.EssbaseName is in the TFTP hierarchy and contains the Convention of naming its equal TFTP Essbase.

  I need to create a property derived for my Essbase hierarchy. This property must evaluate each node in the hierarchy of Essbase, he must go to the TFTP hierarchy and finds its node name as the value in the Custom.EssbaseName property and then return its name of node TFTP.

  Please see the cells in gray, I hope that some of you are able to help this pressing issue!

  

  Hello

  Assuming you'd be on 11.1.2.3 and above all, try this.

  var worm is node. Version;

  var essnodename is node. ABBREV;

  var esspropval ="";

  var psftHier = worm. HierByAbbrev ("TFTP");

  var psftTop = psftHier.TopNode;

  var arrpsft = psftTop.GetDescendants ();

  for (idx = 0; idx<>

  esspropval = arrpsft [idx]. PropValue ("Custom.EssbaseName");

  {if(esspropval==essnodename)}

  return arrpsft [idx]. ABBREV;

  }

  }

  Return ' ';

  I would like to know if it works.

  Thank you

  Denzz

• Allowing entry of the value of a property at the level of the hierarchy and restricting to whole new level.

  Hi all

  I have two property definition Custom.Levelnumber and Custom.Allowattribute which are the goods as well as Local property node level.

  I want validation to restrict the user to allow any value for the Custom.Allowattribute property for any level of hierarchy other than level 6 i, e Custom.Levelnumber with the value 6.

  all other classes in the hierarchy must have an empty value for the Custom.Allowattribute property.

  Hi Madhu,

  Try this-

  If)

  Not (Equals (Integer, PropValue (Custom.LevelNumber), 6));

  Not (IsDefinedPropVal (Custom.Allowattribute, ABBREV (())).

  True)

• Type [0] unknown calculation for the dynamic calculation. Only default agg/formula/time balance operations are managed.

  Hi all

  I came across this error last Monday. I tried all the recommendations and configurations and nothing seems to work to solve the problem.

  Here is the error message-

  [Game Sep 24 12:04:27 2015] Local, ARPLAN, ARPLAN, Ess.Tee@MSAD_2010/9240/Error (1012703)

  Type [0] unknown calculation for the dynamic calculation. Only default agg/formula/time balance operations are managed.

  [Game Sep 24 12:04:33 2015] Local, ARPLAN, ARPLAN, Ess.Tee@MSAD_2010/9240/Warning (1080014)

  Abandoned due to the State [1012703] [0x2e007c (0x56042d17.0xeadd0)] transaction.

  [Game Sep 24 12:04:33 2015] Local, ARPLAN, ARPLAN, Ess.Tee@MSAD_2010/8576/Warning (1080014)

  Abandoned due to the State [1012703] [0x40007d (0x56042d18.0x781e0)] transaction.

  [Game Sep 24 12:04:34 2015] Local, ARPLAN, ARPLAN, Ess.Tee@MSAD_2010/736/Info (1012579)

  Total time elapsed Calc [Forecast.csc]: [621,338] seconds

  The script I'm running-

  SET CACHE HIGH;

  SET MSG SUMMARY;

  LOW GAME REVIEWS;

  UPDATECALC OFF SET;

  SET AGGMISSG

  GAME CALCPARALLEL 2;

  SET CREATEBLOCKONEQ

  SET HIGH LOCKBLOCK;

  FIX ('FY16', 'Final', 'Forecasts', '11 + 1 forecasts', 'prediction of 10 + 2', '9 + 3 forecast', '8 + 4 forecasts', "forecast 7 + 5", "6 + 6 forecast", "forecast 5 + 7", 'forecast of 4 + 8', '3 + 9 forecast', 'forecast 2 + 10', '1 + 11 forecasts')

  DIFFICULTY (@IDESCENDANTS ('entity'))

  CALC DIM ("account");

  ENDFIX

  DIM CALC ("entity", "Currency");

  ENDFIX

  In the essbase.cfg I have already included-

  NETDELAY 24000

  NETRETRYCOUNT 4500

  /Calculator cache settings

  CALCCACHEHIGH 50000000

  CALCCACHEDEFAULT 10000000

  200000 CALCCACHELOW

  Lockblock/set limits

  CALCLOCKBLOCKHIGH 150000

  CALCLOCKBLOCKDEFAULT 20000

  CALCLOCKBLOCKLOW 10000

  Please suggest if there is a way to fix this error. I get a similar error for other calculations as well.

  Kind regards

  EssTee

  And you are positive that no one came in a new Member at level 0 as dynamic Calc?

  What are the versions do you use?

• Load the complete profile of the hierarchy node

  Hello

  I have a hierarchy Viewer in my fragment, which show the hierarchy of this profile, in my case family hierarchy.

  I'm trying to add a link (commandLink) in the node, so when the user clicks on it, it will load this member's full profile.

  When I add the action to the link, inside the node, it returns to me that the attribute is not supported when the component is inside an element of hierarchy Viewer, but outside of the hierarchy, it works.

  Is there a way to work around this problem, or a better way to do what I want?

  I use jdev 11.1.1.7.1

  Thank you

  Cvele_new_account, by using the code and adding the same fragment flow (now I have the same fragment repeated twice) and using the same id of the flow of control between the two of them, I can now present the data.

  ViewObjectImpl voi = am.getCustomerDetailsVO1();
  voi.setNamedWhereClauseParam("vCurrentRecID", NodeRecId);
  voi.executeQuery();
  

  setOutcome("testNode");
  handleOuterPageAction(regSimp);
  

  public void handleOuterPageAction(RichRegion regionParent) {
      System.out.println("regiao: " + regionParent.getId() + "outcome " + getOutcome());
      FacesContext fc = FacesContext.getCurrentInstance();
      ExpressionFactory ef = fc.getApplication().getExpressionFactory();
      ELContext elc = fc.getELContext();
  
      MethodExpression me = ef.createMethodExpression(elc, getOutcome(), String.class, new Class[] { });
      regionParent.queueActionEventInRegion(me, null, null, false, -1, -1, PhaseId.ANY_PHASE);
  }
  

• Hi can anyone give me the number to contact customer care for the Malaysia? I bought adobe membership yesterday but am facing a host of issues since then

  I bought the subscription yesterday but a number if issues are popping up and I am unable to use any of the same

  Can someone please give me the number of Malaysia customer please

  (1) I am unable to download the creative application of clouds. It shows it as trying to connect to the server and stay like that

  (2) when I am connected and try to "manage my account" I don't get the page. It times out

  (3) I am a paying member, but in my options learning and support after I click on contact on I only get the option to ask community.

  He was very confused.

  I am very keen to speak to a customer care agent, if someone can give me the number, please

  Please contact the Support from Adobe on the Customer Contact

  Kind regards

  Hervé Khare

• change the result of the calculation to the negative

  I have a calculation script custom in an Acrobat form field:

  var myFormat = "mm/dd/yyyy".

  var startDt = this.getField("PolicyEffectiveDate").value
  var endDt = this.getField("ChngDate").value

  startDate = util.scand (myFormat, startDt) var;
  var endDate = util.scand (myFormat, endDt);

  xdays var = Math.round (Math.abs ((startDate.getTime () - endDate.getTime (()) / (86400000)))

  Event.Value = ((365-(xdays)) / 365) .toFixed (3) * (this.getField("AnnualPremium2").value)

  How would the total resulting calculation to the negative change?

  Thanks in advance for any help!

  I found a solution... I just multiplied the event.value by negative 1.

• Application of the hierarchy

  Hello

  I need to get back to Manager user for each hier_id id in the hier_users table. If the hier_id not record in the hier_users table, you must submit parent hier_id Manager user_id. my output should be like this. I need to do this by using SQL.

  user_id hier_id

  1 101

  2 100

  3 102

  4 100 -this hierarchy is not the Manager save both need to return its parent hierarchy 2 Manager user_id

  
  

  
  

   CREATE TABLE hier (ch_id NUMBER(18), pa_id NUMBER(18))
   /
   CREATE TABLE hier_users (user_id NUMBER(18) , ch_id NUMBER(18), role VARCHAR2(20))
   /
   INSERT INTO hier VALUES (1 , NULL)
   /
   INSERT INTO hier VALUES (2 , 1)
   /
   INSERT INTO hier VALUES (3 , 1)
   /
   INSERT INTO hier VALUES (4 , 2)
   /
   INSERT INTO hier_users VALUES (100 , 2,'manager')
   /
   INSERT INTO hier_users VALUES (101 , 1, 'manager')
   /
   INSERT INTO hier_users VALUES (102 , 3, 'manager')
   /
   INSERT INTO hier_users VALUES (103 , 4, 'member')
   /
  

  Thanks in advance

  What of it?

  Is to find the first manager in the hierarchy

  SELECT a.ch_id
       , ( SELECT c.user_id
             FROM hier_users c, hier b
            WHERE c.ch_id = b.ch_id AND role = 'manager' AND ROWNUM <= 1
          CONNECT BY PRIOR b.pa_id = b.ch_id
          START WITH b.ch_id = a.ch_id
         ) user_id
    FROM hier_users a;
  

  Output will be like:

  USER_ID CH_ID

  ---------- ----------

  2 101

  1 101

  3 102

  4 101

  Kind regards.

  Al