calendar to a task without waiting

Similar Questions

• stop a loop without waiting for its next iteration

  I wonder if there is a good way, or still anyway to stop a while loop without waiting for its next iteration. Lets say you have a timer in the loop so he iterates once evey 10 seconds, and then you have to wait 10 seconds for him to stop after you press a stop button that could be a problem.

  Thank you!

  
  

• A task to wait another script task

  If I use the following code:

  Get - vm myvm | stop-vmguest-confirm: $false | set-vm - numcpu 2 - memoryGB 4 - confirm: $false | Start-vm

  Will be there always wait for instructions set - vm to complete before trying the virtual machine turns on again or should I add some kind of a statement "wait"?

  The Set-VM must be completed prior to the start-VM will run.

  Only when you add the RunAsync switch, then the following cmdlet will be executed immediately, without waiting for the 1st cmdlet to complete.

• Enter the following command without waiting for the current order to fill

  There is a switch to use that will enter a powercli command without waiting for the command to finish running. Can someone please tell me what the switch is?

  Hello, MNKrantz

  You can use the parameter - RunAsync for several of the PowerCLI cmdlets.  This will cause continuous execution to the next statement once the command is run.

  You can view the cmdlets are supported the RunAsync parameter using the parameter - ParameterName to Get-Command, which was introduced in v3 PowerShell.  So, for example, to search for these Core PSSnapin cmdlets:

  Get-Command -ParameterName RunAsync -Module VMware.VimAutomation.Core
  

  Enjoy.

• Update without waiting in the update and delete command.

  Dear all,
  
  My database is GR 11, 2 on Linux.
  
  What is the best way to resolve the line lock if 2 different sessions commands delete records from the same table?
  
  Can we use to update without waiting in the Update or Delete command?
  
  Thank you
  Imran

  What you can do too, is that you can perform the update that you did for the update with select... see the following topics

  declare
  cursor c1 is
  Select * from EMP
  where deptno = 20
  Update;
  Start
  for c1_rec looping c1
  Update emp
  Set sal = 11
  the location being c1;
  end loop;
  end;
  /

  Concerning
  Karan

• Oracle to update without waiting

  Hi all..
  
  Can you a pls tell me in which case we must use to update without waiting in the sliders.
  my understanding is to activate locks on top of records selected by the cursor using for update.
  but haven't knowlodge on the NOWAIT clause. Can pls tell me exactly in this case you must use the nowait clause.
  
  Thanks in advance,
  Sanjeev.

  Hi Hassan,.

  There are 3 choices

  1 NOWAIT, you set this, if you do not want to wait for the locks.
  Enough if 1 rank is not available to you, you will get an ORA-54.

  2. you can wait until ' n seconds. After "n" seconds, you do not have the lines
  you will get an ORA-30006.

  3 new feature - officially - in Oracle 11 g! SKIP LOCKED!
  Sometimes it's good for us that one TRIES to lock all lines, but not problem, if there is some lines
  which are available to us.
  In this case, we are changing all that remaining availabe lines will be ignored.
  Later - maybe - we try to repeat our process for the remaining lines.
  Of course, we mark our lines changed in some way (e.g. with flag)
  Note that this feature is available in Oracle 10 g (unofficially)!

  Best regards
  Laszlo
  (Trainer SQL and PL/SQL in Hungary)

• Front door without waiting problem

  Hello

  I'm trying to implement a process that gets DB series of 'visits', so I try to send these visits to their users, so I used the front door which includes a sub-process, control type of the modem router is NO WAITING to send visits to all users at the same time, I used a SetValue to count.

  but the gateway loop n times (number of visits) without calling the sub-process, then it calls the sub-process n-times so that all tasks will be sent to a user?

  I'm doing something wrong?

  

  I agree with $Nith... you don't need the front door... just call the subprocess in your loop. Whenever you browse a new subfprocess will be called. You are right that the end user will have to wait until all the others are sent... wil .but he didn't wait until they meet. Just make sure that you set the Invocation policy to "not wait."

  Paul

• Can I sync my calendar with my wife without a credit card

  Can I sync my calendar from the iPad with my wife without a credit card

  You don't need a credit card, a calendar sharing.

  read here: iCloud: overview of calendar sharing

• Use tasks without MAX

  Hello everyone, I need your help. Due to some that HE reasons, I can't install MAX on one of my computers in tests. The DJ is a copy of a previous test bench. In the initial testbed, the user had to choose a NI DAQmx task in the application. Now, I want to keep the same working principle. For this reason that I copy the MAX configuration since the original testbed report and paste it on the new computer (the one without MAX). I will read the configuration settings of the .html (tasks, channels, scales, etc.).

  I know that I can use OR-DAQmx Run-Time Engine 9.1 (heart), so I can work without Max (it always was not testicles)

  My problem is, how to do that the user selects a task (unknown number of parameters strangers, channels, etc.) as well as the measurement will take place without problems? If I have not installed MAX, can I use all the DAQmx palette icons?  Thank you

  The_sun

  PS. Y at - it an option to the date of importation of the .nce file?

  Hi The_sun,

  For your situation, it can be a bit tricky to create by the task and program their settings based on the user's selection.  There is a way, although if you can configure all the options of possible task before the program begins. You can use a box structure that allows you to select which task to load based on the case picker control that the user can choose before the time of execution.  What tasks do you intend to have control of the user?  Your front panel may become cluttered with all the selectable settings, but you can program windows to tabs or other methods of organization if you wish.

  You can use all the vi from the palette DAQmx without installed MAX.  The vi is the driver himself, is independent of the application of MAX.

  When you speak with the import of files .nce?  The date of its creation?  My first research and experimentation did not turn anything on the import of a date from this file.

• With the help of an output to trigger a task WITHOUT additional cables?

  Hello

  I have a PXI-6229 (Multifunction DAQ) and a PXI-6723 (AO, with a few lines of DIO). My channel mappings are not set in stone yet, so I can use either module.

  For a test system, I use producing 2 continuous and periodicals of digital signals in the background (via 2 channels). The 2 waveforms have different profiles, but they are synchronized by being linked to the same task (Digital 1 Wfm d NChan NSamp).

  Model has: 0 0 1 0 1 0 1 0

  Model b: 1 0 0 0 0 0 0 0

  On the one hand the test steps, I need to read a waveform of voltage over (via a channel of AI). When I get to this step, I want to start reading at one of the rising edges of the B model. How can I accomplish this?

  A method I can think of is:

  • Duplicate the model B on another channel
  • Connect to a PFI line on my controller
  • Use the PFI input to trigger the task to HAVE it.

  Is it possible to do without an extra cable? Thanks in advance!

  Hi JKSH,

  First of all, I want to say that your proposed method is a completely logical and it will work. However, this method includes a more physical routing so the trigger can be delayed.

  You can use the export DAQmx (VI) Signal to route your DIO (with pattern B) line to another exit of Terminal such as a trigger. You can then use this signal newly routed to trigger your channel HERE. Here is the documentation for this specific VI:

  http://zone.NI.com/reference/en-XX/help/370469AA-01/lvdaqmx/mxexportsignal/

• Send emails as a task without external SMTP server

  Hello

  I would like to send notifications by e-mail at set intervals, but ideally without needing an external SMTP server (if I could use an external SMTP server, it would be easy to do either with UTL_SMTP, UTL_TCP). It is possible to send mails from within applications using the APEX_MAIL package but I can not use this package in a task scheduler to a valid session. It should probably be possible to create a session of "false" (Giffy Martin on Oracle APEX D'Souza: how to create a Session of the APEX in PL/SQL) in a scheduled task, and then to send mails using APEX_MAIL but I hope there might be a simpler solution, so advice and guidance would be much appreciated.

  Kind regards

  Pavel

  If you do not want a 'Server SMTP external', which would be an "internal SMTP server" by your definition? APEX_MAIL is simply a wrapper around UTL_SMTP. You still need an SMTP server to send emails.

  See setting up Email to:

  http://docs.Oracle.com/CD/E59726_01/doc.50/e39151/adm_wrkspc002.htm#AEADM29163

• ORA-38500: in USING the JOURNAL CURRENT file option is not available without waiting Journal

  I have done some testing migration of expdp on the physics of the standby database by creating db_recovery_file_dest and then convert the day before instant db db. After that test was done, I converted to the db in waiting.
  
  However the recovery process does not seem to work somehow.
  
  I ORA-38500: option with the HELP of JOURNAL CURRENT file is not available without redoing standby connect mode standby when I tried to recover managed standby database.
  
  It seems all messed up. Can someone help me on this issue? Thank you.

  Laughing out loud

  Test on mine

  Primary

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
  
     THREAD# MAX(SEQUENCE#)
  ---------- --------------
           1            422
  
  SQL> 
  

  Standby

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
  
     THREAD# MAX(SEQUENCE#)
  ---------- --------------
           1            422
  
  SQL> 
  

  Checking for gap

  Try this query

  http://www.Visi.com/~mseberg/monitor_data_guard_transport.html

  This is very late.

  Best regards

  mseberg

• How can I remove 3 non-functional computers without waiting until July 2016. I need to allow 2 new ones.

  By Apple, I have 5 computers authorized. 3 of them do no more work.  I need to disable allow all five to allow 2 new window 10 PC. However, by the regulation of the Apple, I have to wait until July 2016.  If there any exceptions to this rule of removing annual approval?  2 new PC has Windows OS 10.

  Click here and ask for help from the staff of the iTunes Store. Only, they can perform a second remove all within the annual period.

  (137644)

• How to copy DAQmx task without the help of MAX?

  Howdy-

  I hit a bit of trouble here I think points to a fundamental misunderstanding I can have on DAQmx channels and tasks.  I can hack together a workaround, but I would like to know how to do these things, common sense.

  In a Word, I prefer to do everything in the code and not use MAX.  For my application, I would like to create a single channel/task initialized with all the scaling, the physical channel parameters and units (it is what is, in my case, a 'channel').  I would then like to create copies of this channel/task and configure each with parameters of specific task of sampling... corresponding to what I would call the "tasks" to use "Channel".

  I'll have no chance, so of course, I do not understand what I do.  Any reading/posts I've met use MAX.  Here's what I've tried so far:

  

  Even when you try to use MAX, I am the breath.  Any help straightening on my confusion here is very appreciated.

  Thanks in advance and have a nice day.

  -Brad

  In fact, you're not confused.  In this instance of National Instruments is perhaps...

  See the links ofthese ideas in the link.

  But a 'task' is really just a section in an XML file.  If this file is named *.lvproj the project has access to tasks.  If this file is *.nce any labview application has access to tasks.  If this file is created by the RTE that vi has access to the task.  In short, the "tasks" are never really defined by 'Code' but by the XML code to the file than declairs them and teir properties.  Tasks need to be defined a time-preference during design - project

  Yes, it's a bit simplistic but a good analogy!

  Go ahead and kiss MAX to set your tasks... use DAQmx property nodes if you need to programmatically determine a task property.   "do everything in code" as you say is just not really the way it is... the way I think you hear it...  'S really not 'made it in the code"but rather how LabVIEW is inherintly multithreaded.  The IDE just handles it for you "So easy that could encode a cave man!  Relax and let it work the way it does work for you.

• Live running without waiting for results

  Hello world

  I have a problem that I can't imagine would be unique and may have an obvious solution that I forget.  in any case, I have a class that contains an array of a separate allows class calling device.  in the class of device, there is a (vi) method to do a test of performance on the device.  What I need to do, it's stress all devices at the same time by running permanently the performance of tests on them at the same time, but not more than one on each device.  essentially I'd like dynamically create the threads running on each device performance test.  I have problems to find a solution in labview for this.  Someone at - it good ideas?

  If there was a way to tunnel the array in a for loop and just get the method will, but then that would mean each iteration start at a time that cannot be made.

  I have attached a picture of what it would look like if I had 4 go but I'd like to be able to dynamically generate each Exec.vi system running simultaneously.  I hope I described this problem pretty well!

  Thanks in advance

  Brent Schenk

  BrentSchenk wrote:

  Hello world

  ... What I need to do, it's stress all devices at the same time by running permanently the performance of tests on them at the same time, but not more than one on each device.  essentially I'd like dynamically create the threads running on each device performance test.  I have problems to find a solution in labview for this.  Someone at - it good ideas?...

  Here's a screenshot of a VI I use to launch a case of a VI without blocking the main program (each call to execute CAN Loop.vi starts the CAN Loop.vi and returns).  In my case, each VI manages a station on a testbed of N-station and communicates with the rest of the program through the queues and events.  It is a little overkill for many applications, but it works well in mine, where the number of stations is determined at runtime, and each station can be controlled by another class (also defined at run time and configurable when the program is running!).

  Mark Moss

  Electrical Validation engineer

  GHSP