A task to wait another script task

Similar Questions

• Bad performance of the Script when it is called from another Script

  Hello

  I have developed a. SOUTH who calls another script via "ScriptInclude" command and I noticed a substantial decrease in performance when running in this way.

  Normally my calculation scripts runs in less then 10 sec when it is running alone.

  However, when I call the script of my. Script SOUTH it takes 2-10 minutes on the same set of data.

  It's almost as if he is running in debug mode, where I can see my channel list being filled with data that the script runs.

  What could slow this process down so much?

  With the help of DIAdem 2015 32 bit.

  OK, I used this to speed up the result and it works like a charm

  Call UIAutoRefreshSet (False)     

• I need script to remove the line with 2 points, another script to remove next lines

  I need script to remove the line with 2 points, another script to remove next lines of two scripts needed help please

  Thanks in advance

  Concerning

  Lakshmiganth

  Scroll through each pathitem and look at the length of his pathPoints group.  If the length is equal to 2 and then use the remove() method to remove it.  For example (this is rough, off the top of my head):

  var lines = new Array();

  for (i = 0;  I have< app.activedocument.pathitems.length; ="" i++)="">

  If (app.activeDocument.pathItems [i].pathPoints.length == 2) {}

  Lines.push (App.activeDocument.pathItems [i]);

  }

  }

  for (i = 0;  I have< lines.length; ="" i++)="">

  Lines [i]. Remove();

  }

• If another script based on the relationship between the height of the document to the width

  Sorry I don't know almost nothing about the PS scripts. But, this is my cry for help

  I have an 'IF' / 'ELSE' script. Who does something like this...

  If

  the height of the document to the width ratio is greater than 4:1, then run photoshop action #1

  on the other

  run the photoshop #2 action.

  I want the lot of hundreds of images which are all different sizes and certain tasks must be accomplished if the height report and the width is too important.

  I don't check this, but something along these lines should work.

  var doc = activeDocument;
  if (Math.max(doc.width,doc.height)> 4*Math.min(doc.width,doc.height)){
      //code for action 1
      }
  else{//code for action 2
      }
  

• Adding another script worm IPCC Enterprise 4.6

  I broke the script live today so I ask before I try again.

  I have a script called CC_Main_V5. When I use Explorer to scripts, I can see the different versions of the script and say which one is the active version. I want to make a copy of the current version to begin programming of a newer version of it.

  I tried this way 1 and broke it - I opened the version active, makes a change in the script, chose save as and used the same name script (CC_Main_V5) but not checked the box that States make the active script on save. I thought that this would add another version in the script editor I could modify and play with.

  What's happened is that the active script became CC_Main_V4. It is a totally different script name, don't know why it turned on instead of a different version of the CC_Main_V5 script.

  So my question: how to make a copy of the script CC_Main_V5 which will apper in the Script Explorer when I develop the CC_Main_V5. I want to be able to switch between life and my test.

  Thank you

  When you're in the script editor and you go to edit a script, it automatically increases the 'version' one meter.

  (as indicated on the bar at the top of the page windows check this just open a script in the 'Browse' mode. then click on the "Edit" button to put the script in Ed. mode version should have a better by one of what appeared to be the version in browse mode.)

  You should see something like the following in the top bar of the window:

  IE: Script Editor [CC_Script {all customers}.013 [live Version] [Browse]]

  (this script is called CC_Script and is the version.013 and is in navigation mode)

  When you switch to edit mode, you should see something like the following:

  Script editor [CC_Script {all customers}.014 [live Version] [edit]]

  (this script is still named CC_Script and is now the version.014 and is in edit mode)

  (automatically augmented version and you need to do to keep this version is to press save button; or leave it prompts you for a backup if you were to press the browse buttons or monitor)

  When you save the script, do not use the function "save under" but comes regularly record.

  You can use ' options > Preferences on the menu drop-down menus to set the option 'automatically make a script active when recording' off. This will allow you to save the script with registration works but do not do it activates.

  enabled or not, this version of the script has now shown that the first script in the script Explorer list.

  Please visit this link on the Administration's Script more ICM 4.6:

  http://www.Cisco.com/en/us/products/SW/custcosw/ps1001/products_user_guide_chapter09186a00800f061f.html

• A script can run another script?

  Ladies and gentlemen,

  I don't know of a function call to another file for which I used the #include directive. I want to run a .jsx I don't know until run time.

  So far, I found this: If a script file contains

  #target framemaker

  It is possible to use line (lvFilename) () .execute (without the target instruction that would just open the script in ESTK).

  But: The execute() method triggers a warning that I need to run only scripts that are from reliable sources (or so...).

  Is there another method to run other scripts? Or y at - it a way to make my trusted scripts?

  -Michael

  Michael, here's another idea of eval():

  scriptFile var = File('/c/Projects/ExtendScript/Alert.jsx');
  var script = "#include" + scriptFile.fullName;

  eval (script);

  I tried this and it handles nested #includes and $. Filename. I can't be sure it would work in any case however. I think there must be a more elegant way...

  Ian

• Let a funtion wait another full STI

  Hi all
  
  I have a funtion that calls part of a viewStack. On this viewStack is another function, which is called with the tag creationComplete.
  
  If I use the 1 function after I called the viewStack manually - my function so that the creationComplete function has done its job, works well.
  
  If I use the 1 function until I got an error. This is logical, because the 2nd function must be performed before the 1st function can reach its goal.
  
  Yes, is there a way to tell the first function to check if the 2nd function has executed and if not set it off and wait until it?
  
  Thanks - Michael
  
  
  

  You are just gnilt. Now, I solved the problem in this way. I have the stack with the initFunction of a loaderState. Am I on the stackChild on full and changed the progressBarText to 'initializing Application... ". ». At the beginning of the initFunction (called, when loading content) I switch back to the State "" and select the mainStackChild. " The rest of the service works well in the background.
  Because I use a customPreloader (a png of discoloration), there's only a Progressbar at all.

  A Fake, I know, but who cares ;-)

• stopped script (still another script) when you turn on the computer

  Almost everytime I start the computer, I get the error message. Script stopped, do you want to retry the script or abandonment of it.
  The scripts are always different. And until it is cleared (sometimes a few of them) the functions offline is very slow and I can't go on the internet.

  Hi HennieK,

  1. did you of recent changes on the computer?

  2. what browser you use on the computer?

  3. what happens when you try the Internet?

  Disable script debugging in internet explore and check if it helps.

  How to resolve script errors in Internet Explorer on Windows computers

  http://support.Microsoft.com/kb/308260

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Execute and return a value (or object) from another script

  I wish I could have some of the functions of the little that I often use in my scripts, just like seporate scripts. so I can then update in one place and do not copy in every script, I want to use them in.

  I don't know if this is possible at all. But I'd love to be able to just call them and return of their share values somehow.

  for example

  Swatches of color key code, I need:

          var inCutColorCMYK = cmykColor(50, 0, 100, 0);
          var intCutSPOT = makeSwatch("CutIN", inCutColorCMYK);
  

  so I have these functions I have tweeked/found:

     function makeSwatch( swName, swCol) {  
      var doc = app.activeDocument;
      var sel = doc.selection;
      if (!inCollection(doc.swatches, swName)) {  
      var aSwatch = doc.spots.add();  
      aSwatch.name = swName;  
      aSwatch.color = swCol;  
      aSwatch.tint = 100;  
      aSwatch.colorType = ColorModel.SPOT;  
      var aSwatchSpot = new SpotColor();  
      aSwatchSpot.spot = aSwatch;  
      return aSwatchSpot;  
      }else{  
          return doc.swatches.getByName(swName);  
          }  
      };
  
  
  function cmykColor(c, m, y, k) {  
      var newCMYK = new CMYKColor();  
      newCMYK.cyan = c;  
      newCMYK.magenta = m;  
      newCMYK.yellow = y;  
      newCMYK.black = k;  
      return newCMYK;  
      };
  
  
  
  
  function inCollection(collection, nameString) {  
         var exists = false;  
     try{
      for (var i = 0; i < collection.length; i++) {  
          if (collection[i].name == nameString) {  
              exists = true;  
              }  
          }  
      }catch(e){//alert("Illustrator needs drop kicked!!\nPlease restart Illustrator :/\n\n"+e)
          }
          return exists;  
          
        };
  

  in any case! I keep finding my self using functions like that again and again new scripts and hope there is a way to do this!

  Any help is appreciated!

  -Boyd

  You have the file a.jsx, something like myLibrary.jsx, and in it, you can have all the functions for future use. In the file, it can look like this:

  ------------------------------------ Library file -----------------------------------

  #target illustrator

  function MyLibrary() {}

  this.cmykColor = function (c, m, y, k) {}

  var newCMYK = new CMYKColor();

  newCMYK.cyan = c;

  newCMYK.magenta = m;

  newCMYK.yellow = y;

  newCMYK.black = k;

  Return newCMYK;

  };

  function applyFillColorTo (item, color) {}

  item.fillColor = color;

  }

  function CataloguedPathItem (pathItem) {}

  var p = pathItem;

  p.applyFillColor = {function (color)}

  applyFillColorTo (this, color);

  };

  return p;

  }

  this.cataloguedPathItem = {function (pathItem)}

  var p = new CataloguedPathItem (pathItem);

  return p;

  }

  };

  ----------------------------------------------------------------------------------------

  And then you can understand and use this file in other scripts, like here:
  -------------------------------------- Script File ---------------------------------

  #target illustrator

  #include 'C:\\Users\\Me\\Desktop\\My Adobe Scripts\\Illustrator\\MyLibrary.jsx.

  function test() {}

  var MyLib = new MyLibrary(); the script library is used as an object - elements of its scope of application are available through point (.) as mylib.myFunction ();

  If (app.documents.length > 0) {}

  var doc = app.activeDocument;

  If (doc.selection.length > 0) {}

  var MonElement = mylib.cataloguedPathItem(doc.selection[0]);

  var mylib.cmykColor (0,100,50,0) = myColor;

  myItem.applyFillColor (myColor);

  }

  } else {}

  Alert ("there is no open document.");

  }

  }

  test();

  ----------------------------------------------------------------------------------------

  The colors test script just a pathItem, but it uses functions from the inside of the object of 'library' to power the process. Note that to use the library of color a path implied instantiate this path as a custom which is a 'applyFillColor' method that uses a function of the scope of the library (called "applyFillColorTo") for power. Then, we can not simply the function "applyFillColorTo" use within the scope of the Script file because it is protected by the MyLibrary object.

• Create the script from another script using GUEST

  Oracle 11
  
  Instead of having to make a link to a different database, I want to create 2 scripts that are run from a shell script and run separately. Run Script1 in Database1 would create 2 Script using PROMPT to create the second script while entering a date of base1 to base2. I've almost got it but the problem is... Script2 using COPY FROM and I need to put a "-" at the end of each line that the GUEST takes as a literal instead of as part of the output.
  
  SCRIPT1:

  set pagesize 0
  set trimspool on
  set linesize 2000
  set echo off
  set verify off
  set feedback off
  set sqlblanklines on
  
  spool /home/michelle/sql_scripts/sl_dtc_copy2.sql
  
  PROMPT whenever sqlerror exit sql.sqlcode rollback
  PROMPT SET ARRAYSIZE 5000
  PROMPT SET COPYCOMMIT 20
  PROMPT set linesize 4000
  PROMPT 
  PROMPT COPY FROM {username}/{pswd}@{DB2}  TO {username}/{pswd}@{DB2}
  PROMPT CREATE SL_DTC_TMP USING SELECT DISTINCT 
  PROMPT col1, col2, col3
  PROMPT FROM dual
  PROMPT WHERE veh_data_elements_cd = 'ODO_READ'
  PROMPT and       dh.data_collected_timstm >=  
  select trunc(sysdate)-7 from dual; 
  PROMPT and       substr(vdh.vin,10,1) in ('A','B','C','D') 
  PROMPT /
  
  PROMPT spool off
  PROMPT exit
  
  spool off
  exit

  SCRIPT2 NOW:

  whenever sqlerror exit sql.sqlcode rollback
  SET ARRAYSIZE 5000
  SET COPYCOMMIT 20
  set linesize 4000
  
  COPY FROM {username}/{pswd}@{DB2}  TO {username}/{pswd}@{DB2}
  CREATE SL_DTC_TMP USING SELECT DISTINCT
  col1, col2, col3
  FROM dual
  WHERE veh_data_elements_cd = 'ODO_READ'
  and       dh.data_collected_timstm >=
  12-AUG-11
  and       substr(vdh.vin,10,1) in ('A','B','C','D')
  /
  spool off
  exit

  SCRIPT2 HOW IT SHOULD BE:
  -A [SPACE] AND a [-] at the end of each line
  -THE DATE MUST HAVE THE APOSTROPHES AND PREFERABLY AT THE END OF THE PREVIOUS LINE
  

  whenever sqlerror exit sql.sqlcode rollback
  SET ARRAYSIZE 5000
  SET COPYCOMMIT 20
  set linesize 4000
  
  COPY FROM {username}/{pswd}@{DB2}  TO {username}/{pswd}@{DB2} -
  CREATE SL_DTC_TMP USING SELECT DISTINCT -
  col1, col2, col3 -
  FROM dual -
  WHERE veh_data_elements_cd = 'ODO_READ' -
  and       dh.data_collected_timstm >= '12-AUG-11' -
  and       substr(vdh.vin,10,1) in ('A','B','C','D')
  /
  spool off
  exit

  Thank you

  Oops, sorry, I forgot to change the line.
  Must be double quotes to delimit the orignial:

  SELECT 'WHERE veh_data_elements_cd = ''ODO_READ'' -' from dual
  

  Kind regards
  Sylvie

• Getting the value of a variable in another script object

  Hi all

  I have a scenario where I have a script object (MyTexts1) that contains a large amount of text in the form (all texts are stored in variables (fx. MyTexts1.infoText1). the variables are named after fields (which means I have a field called "infoText1").

  So for each field, I call a function that takes the name of the field. This function (located in my script called 'functions' object) must somehow, and then find the value of the variable 'MyTexts.infoText1 '.

  Now my question is:

  How can I get the above - scenario and if not why?

  Thanks in advance

  See you soon

  Kim Christensen

  Dafolo c/o

  Denmark

  Hello

  You can do with the object as a script.

  For example the "MyTexts" script with string variables object and a function to return values.

  var infotext1 = "Lorem ipsum dolor sit amet"
  var infotext2 = "Non eram nescius Brute cum"
  
  function getText(FieldNumber) {
            return eval("infotext" + FieldNumber);
  }
  

  To populate a field, you can call the function in the script object with an argument, which is the alias for the number of variable you want to return.

  You don't need to enter the full somExpression for your script object, the name is sufficient.

  Textfeld1.rawValue = MyTexts.getText(1);
  

• An another Script of Action aborted

  I do a slide show about 18 images in all 9 thumbnails and images of size 9. The problem, in that I keep running is the error "a script in this movie is causing flash player 9 to run slowly. The Flash is set to player 9 and action script 2.0. I did uninstall it reinstall advice in other threads and even tried it on other machines, coming up with the same results in the end. I read that it might be too script on the single image says here's the script that sits on this image of the first and the only one.

  this.createEmptyMovieClip ("container", 1);

  var imagesNumber:Number = 9;

  for (i = 1; i < = imagenumber; i ++) {}

  container.attachMovie (I have "Cakethumb0", "Cakethumb0" + i + "_mc", i);

  Cakethumb_mc = container ["Cakethumb0" + i + "_mc"];

  Cakethumb_mc._x =(i-1) * Cakethumb_mc._width;

  Cakethumb_mc._y = (Stage.height-Cakethumb_mc.height)/2

  Cakethumb_mc.largerImage = i;

  Cakethumb_mc.onRelease = function() {}

  _root.attachMovie ("Cakeimage0"+ this.largerImage,"large_mc", 2);

  large_mc._x = (Stage.width - large_mc._width) / 2;

  large_mc._y = (Stage.height - _height. large_mc) / 2;

  large_mc.onRelease = function() {}

  this.removeMovieClip ();

  }

  }

  }

  container.onEnterFrame = function () {}

  This ._x += Math.cos (* Math.PI (-root._xmouse/Stage.width)) * 15;

  If (this ._x > 0) {}

  This ._x = 0;

  If (-cet._x >(this._width-Stage.width)) {}

  This ._x =-(this ._width - Stage.width);

  }

  };

  I appreciate any help you guys can send my way.

  Is this a coding error when you declare a variable, but spelling mistake what follows when it gets put to use, or is the variable that is used somewhere else?

  var imagesNumber: number = 9;

  for (i = 1; i<>imagenumber; i ++) {}

• How to call a function from another script.

  Hallo

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  next / NEXT)

  and here is my script.

  Main.As

  package
  {
  import flash.display.MovieClip;
  import flash.display.Sprite;
  import flash.display.StageAlign;
  import flash.display.StageScaleMode;

  import flash.events.Event;
  import flash.events.EventDispatcher;
  import flash.events.MouseEvent;
  import flash.net.URLRequest;
  import flash.net.URLLoader;

  
  SerializableAttribute public class Main extends MovieClip
  {
  public void Main()
  {
  trace ("Startup");
  }

  public void PRINT (): void
  {

  trace ('work');

  }
  }
  }

  
  Next.As

  package
  {
  import flash.display.MovieClip;
  import flash.display.Sprite;
  import flash.display.StageAlign;
  import flash.display.StageScaleMode;

  import flash.events.Event;
  import flash.events.EventDispatcher;
  import flash.events.MouseEvent;
  import flash.net.URLRequest;
  import flash.net.URLLoader;

  
  SerializableAttribute public class then extends MovieClip
  {

  private var _main:Main;

  public function Next()
  {
  NEXT_INT();
  }

  
  private void NEXT_INT (): void
  {

  mc.buttonMode = true;
  mc.addEventListener (MouseEvent.MOUSE_DOWN, NEXT_PRINT, false, 0, true);
  }

  private void NEXT_PRINT(e:MouseEvent):void
  {
  _main. PRINT();
  }

  }

  }

  http://noLabel.pl/QuickTest.rar

  http://noLabel.pl/QuickTest.zip

  Try this. I can't compile your application in case of location (names of variables with national characters). Here you have a quick example: we have two symbols in the library buttonMC and playerMC related to clssses Player and button. There handleClick (click event handler) method in the Button class, who do the work for you.

  concerning

  JK

• How to move one env to another script

  Hello
  
  I have a database where I have two schemas.
  
  (1) owner and user 2). The user schema contains all of the synonyms for objects in the schema of the owner and the application will connect the user to the schema only.
  
  
  Now I have 2 script files) 1 create tables in the owner + give grant access for the user 2) create synonyms for objects in the owner
  
  
  I have the code of the Dev environment to QA. For QA I have no privileges must give the DBA script file to execute
  
  My DBA says... give the scripts through clearcase. only 2 script files should be here and information on the environment should not be hardcoded. That is to say
  
  for instructions in the script as a file: grant access for < table_name > to USERSCHEMANAME and create the synonym < table_name_alisa > for OWNERschemaNAME.table_name
  
  How can I give the scripts to my DBA with a hardcodiing.    How do you have this movement of code in your project?
  
  Can I use any placeholder for the NAME of owner (environment part spefcific) and have to ask them to replace it with the name of corresponding runtime env
  
  What should I do?
  
  I hope that I am clear, please let me know if iam not clear
  
  concerning
  REDA

  My dba was to talk about some & 1 and said something like... grant select, insert, update, delete on emp to & 1

  Your DBA seems to have its scripts.
  And you need to read on [the substitution variables | http://www.oracle.com/pls/db102/search?remark=quick_search&word=substitution+variables&tab_id=&format=ranked]
  Name of the schema = a variable.

  And continue to ask questions to your DBA, if you do not understand what he wants.

• With the help of another script editor-possible?

  Is this possible in LS? There is an option for this in Acrobat. I was wondering.

  Graham

  Not at the moment.

  Paul