Call Cisco UBE is not received endpoint

Hello

I am tryng to install what UBE between two GUY, the idea is that R1 will send the call to the CUBE that will send the call to R2 (following a pattern). Earlier today, when the call is sent to R1 call is received for CUBE but resemble the call is not to send to R2, even when leaving to R2 dial-peer is matched. I installed a phone in CUBE and I can can appeal to R2 using the same outgoing dial peer match R2, so I don't know why CUBE isn't a R1 to R2 call diversion

Schema:

H323 H323

R1 ----------------> CUBE -----------------> R2

DN = 2...                                           DN = 3...

Debugging

======

Call is received of R2 and outgoing dial-Exchange R2 files is put in correspondence, but call for R2

GK #debug voip dialpeer

VoIP dialpeer default debug is on

* Jun 29 12:56:00.927: //-1/C7785C1D8183/DPM/dpAssociateIncomingPeerCore:

Number = 2003, called number = 3001, Voice-Interface = 0 x 0.

Timeout = TRUE, Peer Encap Type = ENCAP_VOIP, Type of research peer = PEER_TYPE_VOICE,

Peer Type Info = DIALPEER_INFO_SPEECH

* Jun 29 12:56:00.927: //-1/C7785C1D8183/DPM/dpAssociateIncomingPeerCore:

Result = Success (0) after DP_MATCH_INCOMING_DNIS; Incoming dial-peer = 1999

* Jun 29 12:56:00.927: //-1/C7785C1D8183/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result = 0

* Jun 29 12:56:00.931: //-1/C7785C1D8183/DPM/dpAssociateIncomingPeerCore:

Number = 2003, called number = 3001, Voice-Interface = 0 x 0.

Timeout = TRUE, Peer Encap Type = ENCAP_VOIP, Type of research peer = PEER_TYPE_VOICE,

Peer Type Info = DIALPEER_INFO_SPEECH

* Jun 29 12:56:00.931: //-1/C7785C1D8183/DPM/dpAssociateIncomingPeerCore:

Result = Success (0) after DP_MATCH_INCOMING_DNIS; Incoming dial-peer = 1999

* Jun 29 12:56:00.931: //-1/C7785C1D8183/DPM/dpMatchSafModulePlugin:

dialstring = NULL, saf_enabled = 0, saf_dndb_lookup = 0, dp_result = 0

* Jun 29 12:56:00.931: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Number =, called number = 3001, Peer Info Type = DIALPEER_INFO_SPEECH

* Jun 29 12:56:00.935: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Associate the rule of = DP_MATCH_DEST; Called number = 3001

* Jun 29 12:56:00.935: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

Result = Success (0) after DP_MATCH_DEST

* Jun 29 12:56:00.935: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

dialstring = 3001, saf_enabled = 0, saf_dndb_lookup = 1, dp_result = 0

* Jun 29 12:56:00.935: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:

Result = Success (0)

The outgoing dial matched host list:

1: Tag dial-peer = 2000

CUBE see the race

============

GK #show run
Building configuration...

Current configuration: 2628 bytes
!
! Last modification of the configuration at 12:31:19 UTC Friday, June 29, 2012
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname GK
!
boot-start-marker
start the flash c2800nm-adventerprisek9_ivs_li - mz.151 - 4.M3.bin system
boot-end-marker
!
!
enable secret 5 $1$ szeU$ enWyM69bTodk0Aiwyxw5R.
!
No aaa new-model
!
!
dot11 syslog
IP source-route
!
!
IP cef
!
!
!
no ip domain search
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
!
voip phone service
h323 connections allow h323
allow connections h323 to SIP
allow connections sip h323
allow sip to sip connections
H323
SIP
!
!
!
!
!
voice-card 0
dspfarm
DSP services dspfarm
!
Crypto pki token removal timeout default 0
!
!
!
!
license udi pid CISCO2811 sn FHK1225F3KT
!
redundancy
!
!
controller LAN 0/0/0
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
192.168.4.1 IP address 255.255.255.0
automatic duplex
automatic speed
!
interface FastEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
interface Serial0/2/0
no ip address
Shutdown
no fair queue
2000000 clock frequency
!
interface Serial0/2/1
no ip address
Shutdown
2000000 clock frequency
!
!
Router eigrp 1
192.168.4.0 network
!
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
!
NLS RESP-timeout 1
CPD cr id 1
!
!
!
!
!
!
control plan
!
!
Voice-port 1/0/0
!
Voice-port 1/0/1
!
!
!
profile MGCP default
!
SCCP local FastEthernet0/0
SCCP ccm 192.168.4.1 ID 1 version4.0
SCCP
!
SCCP ccm Group 1
associate the ccm 1 priority 1
the associated profile 1 registry GK-VOUGEOT
!
transcode dspfarm profile 1
Codec g729r8
Codec g729br8
Codec g729ar8
Codec g729abr8
Codec g711alaw
Codec g711ulaw
maximum sessions 3
associate the PCRS application
!
Dial-peer voice 2000 voip
destination-model 3...
session target ipv4:192.168.3.2
Transparent codec
!
voice pots Dial-peer 5001
destination-model 5001
port 1/0/0
!
Dial-peer voice voip 1999
session target ipv4:192.168.3.1
incoming called-number 3...
!
!
!
!
access controller
area local zone1 micasa.com 192.168.4.1 intrazone enable
area local micasa.com enable-intrazone zone2
zone prefix zone1 2... GW-priority 10 CME - Lab
zone prefix zone2 3... GW-priority 10 CME-Legacy
GW-type-prefix 1 #* by default-technology
no downtime
!
!
phone service
5 units of sdspfarm
sdspfarm tag 1 GK-VOUGEOT
Max-joined 4
Max - dn 4
IP source-address 192.168.4.1 port 2000
MAX conferences 8-6 win
transfer full-consult system
!
!
!
Line con 0
password leoleo
opening of session
line to 0
line vty 0 4
password leoleo
opening of session
transport of entry all
!
Scheduler allocate 20000 1000
end

GK #.

R1 show race

=========

CME - Lab #show run
Building configuration...

Current configuration: 7806 bytes
!
! Last modification of the configuration at 08:23:06 LAPAZ Friday, June 29, 2012
! NVRAM config update at 13:13:31 LAPAZ Thursday, June 28, 2012
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
CME - Lab host name
!
boot-start-marker
start the flash c2800nm-adventerprisek9 - mz.151 - 3.T3.bin system
boot-end-marker
!
!
type 0 2 t1 card
enable secret 5 $1$jJ.7$b/Yaq0M36fgZSrYpCK5LD/
!
No aaa new-model
!
clock timezone LAPAZ-4 0
network-clock-participate wic 2
!
dot11 syslog
IP source-route
!
!
IP cef
!
DHCP excluded-address 192.168.1.1 IP 192.168.1.20
DHCP excluded-address IP 192.168.2.1 192.168.2.20
DHCP excluded-address IP 192.168.3.1 192.168.3.20
DHCP excluded-address IP 192.168.6.1 192.168.6.20
!
IP dhcp DATA pool
network 192.168.1.0 255.255.255.0
option 150 ip 192.168.2.1
default router 192.168.1.1
!
pool IP dhcp VOZ - CME
network 192.168.2.0 255.255.255.0
option 150 ip 192.168.2.1
default router 192.168.2.1
!
VOZ-CUCM dhcp IP pool
network 192.168.6.0 255.255.255.0
option 150 ip 192.168.6.10
router by default - 192.168.6.1
!
!
no ip domain search
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
primary-qsig ISDN switch type
!
!
!
voip phone service
list of approved IP addresses
IPv4 192.168.3.2
SIP
!
voice class codec 1
g711ulaw codec preference 1
codec preference 2 g729r8
g729br8 preferably 3 codec
g711alaw preferably 4 codec
!
!
!
!
translation of the voice-rule 1
rule 1 3... / / 1809544\0 /.
!
voice translation-rule 100
rule 1 /2/ /1002/
!
voice translation-rule 101
rule 1 /1002/ /2/
!
!
voice translation-profile SITE-CODE-CallerID
definition of 100 calls
!
SITE-CODE-DNIS voice translation-profile
translate called 101
!
!
voice-card 0
dspfarm
DSP services dspfarm
!
Crypto pki token removal timeout default 0
!
!
!
!
license udi pid CISCO2811 sn FHK1225F3GX
Archives
The config log
hidekeys
!
redundancy
!
!
controller T1 2/0/0
the clock source internal
long CableLength 0dB
time intervals PRI - Group 1-2: 24
!
!
class-map correspondence-any WEB browsing
http protocol game
secure http protocol game
class-map matching VOICE
match Protocol rtp
!
!
OUTBOUND-POLICY policy-map
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
no ip address
automatic duplex
automatic speed
!
interface FastEthernet0/0.10
encapsulation dot1Q 10
IP 192.168.2.1 255.255.255.0
H323-gateway voip interface
H323-gateway voip id zone1 ipaddr 192.168.4.1 1719
H323-gateway voip h323-id CME - Lab
port of link voip H323-gateway 192.168.2.1
!
interface FastEthernet0/0.11
encapsulation dot1Q 11
192.168.6.1 IP address 255.255.255.0
!
interface FastEthernet0/0.50
encapsulation dot1Q 50
IP 192.168.1.1 255.255.255.0
!
interface FastEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
interface Serial0/0/0
address 192.168.3.1 IP 255.255.255.0
encapsulation ppp
64000 clock frequency
!
interface Serial0/0/1
no ip address
Shutdown
2000000 clock frequency
!
interface Serial0/2/0:23
no ip address
encapsulation hdlc
primary-qsig ISDN switch type
ISDN timer T310 120000
ISDN-emulate network protocol
ISDN incoming-voice
No cdp enable
!
!
Router eigrp 1
network 192.168.1.0
network 192.168.2.0
192.168.3.0 network
network 192.168.6.0
Auto-resume
!
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
!
exploitation forest esm config
!
!
!
!
!
flash:/PHONE/6921_6941_6961/Sccp/cmterm-69xx-sccp.9-2-1-0.tar cmterm-69xx-sccp.9-2-1-0.tar alias TFTP server
alias of server TFTP flash:/PHONE/6921_6941_6961/Sccp/BOOT69xx.0-0-0-14.zz.sgn BOOT69xx.0 - 0-0 - 14.zz.sgn
alias of server TFTP flash:/PHONE/6921_6941_6961/Sccp/SP69xx.0-0-0-8.zz.sgn SP69xx.0 - 0-0 - 8.zz.sgn
alias of flash:/PHONE/6921_6941_6961/Sccp/SCCP69xx.9-2-1-0.loads SCCP69xx.9 - 2-1 TFTP server - 0.loads
alias of flash:/PHONE/6921_6941_6961/Sccp/SCCP69xx.9-2-1-0.zz.sgn SCCP69xx.9 - 2-1 TFTP server - 0.zz.sgn
Server TFTP flash:/PHONE/7942_7962/Sccp/apps42.9-2-1TH1-13.sbn alias apps42.9 - 2-1TH1 - 13.sbn
Server TFTP flash:/PHONE/7942_7962/Sccp/cnu42.9-2-1TH1-13.sbn alias cnu42.9 - 2-1TH1 - 13.sbn
Server TFTP flash:/PHONE/7942_7962/Sccp/cvm42sccp.9-2-1TH1-13.sbn alias cvm42sccp.9 - 2-1TH1 - 13.sbn
Server TFTP flash:/PHONE/7942_7962/Sccp/dsp42.9-2-1TH1-13.sbn alias dsp42.9 - 2-1TH1 - 13.sbn
Server TFTP flash:/PHONE/7942_7962/Sccp/jar42sccp.9-2-1TH1-13.sbn alias jar42sccp.9 - 2-1TH1 - 13.sbn
alias server TFTP flash:/PHONE/7942_7962/Sccp/SCCP42.9-2-1S.loads SCCP42.9 - 2 - 1 S .loads
flash:/PHONE/7942_7962/Sccp/term42.default.loads alias term42.default.loads TFTP server
flash:/PHONE/7942_7962/Sccp/term62.default.loads alias term62.default.loads TFTP server
Server TFTP flash:/PHONE/7945_7965/Sccp/cmterm-7945_7965-sccp.9-2-1.tar alias cmterm-7945_7965 - sccp.9 - 2 - 1.tar
Server TFTP flash:/PHONE/7945_7965/Sccp/apps45.9-2-1TH1-13.sbn alias apps45.9 - 2-1TH1 - 13.sbn
Server TFTP flash:/PHONE/7945_7965/Sccp/cnu45.9-2-1TH1-13.sbn alias cnu45.9 - 2-1TH1 - 13.sbn
Server TFTP flash:/PHONE/7945_7965/Sccp/cvm45sccp.9-2-1TH1-13.sbn alias cvm45sccp.9 - 2-1TH1 - 13.sbn
Server TFTP flash:/PHONE/7945_7965/Sccp/dsp45.9-2-1TH1-13.sbn alias dsp45.9 - 2-1TH1 - 13.sbn
Server TFTP flash:/PHONE/7945_7965/Sccp/jar45sccp.9-2-1TH1-13.sbn alias jar45sccp.9 - 2-1TH1 - 13.sbn
alias server TFTP flash:/PHONE/7945_7965/Sccp/SCCP45.9-2-1S.loads SCCP45.9 - 2 - 1 S .loads
flash:/PHONE/7945_7965/Sccp/term45.default.loads alias term45.default.loads TFTP server
flash:/PHONE/7945_7965/Sccp/term65.default.loads alias term65.default.loads TFTP server
alias of server TFTP flash:/PHONE/6921_6941_6961/Sccp/DSP69xx.0-0-0-8.zz.sgn DSP69xx.0 - 0-0 - 8.zz.sgn
!
control plan
!
!
voice-port 0/2/0:23
!
Voice-port 1/0/0
signal groundStart
name of station id Leo Salcie
activation of the caller ID
!
Voice-port 1/0/1
!
voice-port 3/0/0
!
voice-port 1/0/3
!
voice-port 0/3/2
!
voice-port 0/3/3
!
CCM-Manager mgcp
CCM-Manager config server 192.168.6.10
!
MGCP
type of service mgcp MGCP call-agent 192.168.6.10 version 0.1
MGCP ecm t38 fax
!
profile MGCP default
!
SCCP local FastEthernet0/0.10
SCCP ccm 192.168.2.1 ID 1 priority 1 version 4.1
SCCP
!
SCCP ccm Group 1
associate the ccm 1 priority 1
the associated profile 1 save CME-VOUGEOT
!
transcode dspfarm profile 1
Codec g711ulaw
Codec g711alaw
Codec g729ar8
Codec g729abr8
Codec g729br8
Codec g723r53
maximum sessions 4
associate the PCRS application
!
Dial-peer cor custom
name 911call
name localcall
name ldcall
!
!
Dial-peer cor list LD
Member 911call
Member localcall
Member ldcall
!
Dial-peer cor list localcall
Member localcall
!
Dial-peer cor list ldcall
Member ldcall
!
!
Dial-peer voice 1000 voip
destination-model 3...
session target ipv4:192.168.4.1
!
!
!
!
phone service
5 units of sdspfarm
sessions to transcode sdspfarm 4
sdspfarm tag 1 GUY-VOUGEOT
Logout em 0:0 0:0 0:0
Max-joined 12
Max - dn 12
Source-address 192.168.2.1 IP port 2000
Auto assign 1 to 6
load SCCP45.9 - 2-1 7965 s
MAX conferences 8-6 win
transfer full-consult system
create the file cnf version-stamp 7960 21 June 2012 09:37:02
!
!
ePhone-dn 1
number 2001
!
!
ePhone-dn 2
number 2002
!
!
ePhone-dn 3
2003 Edition
!
!
ePhone-dn 4
issue 2004
!
!
ePhone-dn 5
issue 2005
!
!
ePhone-dn 6
Number of 2006
!
!
ePhone-dn 9 double line
number 9999
!
!
ePhone 1
security-mode device no
503D Mac address. E5E9.2001
Max-calls-by button-2
type of 6921
button 1:1
!
!
!
ePhone 2
security-mode device no
A 64-0 Mac address. E715. F5B2
type of 7965
key 1:2
!
!
!
ePhone 5
security-mode device no
503D Mac address. E52F. C3E4
Max-calls-by button-2
key 1:3
!
!
!
ePhone 9
security-mode device no
00F0.1D00.0081 Mac address
!
!
!
ePhone 99
security-mode device no
address Mac AABB. CC11.2233
key 1:9
!
!
!
!
Line con 0
line to 0
line vty 0 4
password 7 151E0E03082F24
opening of session
transport of entry all
!
Scheduler allocate 20000 1000
NTP master 3
Server NTP 192.168.2.1
end

R2, see the race

==========

CME-Legacy #show run
Building configuration...

Current configuration: 3189 bytes
!
! Last modification of the configuration at 22:44:24 UTC Thursday, June 28, 2012
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
CME-Legacy host name
!
boot-start-marker
boot-end-marker
!
!
type 0 3 t1 card
enable secret 5 $1$ $0iFd Um7r8JhKS6fMrEpFH64rB0
!
No aaa new-model
!
network-clock-participate wic 3
!
dot11 syslog
IP source-route
!
!
IP cef
!
!
!
no ip domain search
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
primary-qsig ISDN switch type
!
!
!
voip phone service
list of approved IP addresses
IPv4 192.168.2.1
IPv4 192.168.3.1
SIP
!
voice class codec 1
g711ulaw codec preference 1
codec preference 2 g729r8
g729br8 preferably 3 codec
g711alaw preferably 4 codec
!
!
!
!
!
voice-card 0
dspfarm
DSP services dspfarm
!
Crypto pki token removal timeout default 0
!
!
!
!
license udi pid CISCO2811 sn FHK1246F3KE
Archives
The config log
hidekeys
!
redundancy
!
!
controller LAN 0/0/0
!
controller T1 3/0/0
the clock source internal
long CableLength 0dB
time intervals PRI - Group 1-2: 24
!
!
!
!
!
!
!
!
!
interface Loopback0
IP 192.168.100.1 address 255.255.255.0
!
interface FastEthernet0/0
IP 192.168.4.2 255.255.255.0
automatic duplex
automatic speed
!
interface FastEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
interface Serial0/2/0
IP 192.168.3.2 255.255.255.0
encapsulation ppp
!
interface Serial0/2/1
no ip address
Shutdown
2000000 clock frequency
!
interface Serial0/3/0:23
no ip address
encapsulation hdlc
primary-qsig ISDN switch type
ISDN incoming-voice
No cdp enable
!
!
Router eigrp 1
192.168.3.0 network
192.168.4.0 network
network 192.168.100.0
Auto-resume
!
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
!
exploitation forest esm config
!
!
!
!
!
!
control plan
!
!
voice-port 3/0/0:23
!
Voice-port 1/0/0
!
Voice-port 1/0/1
!
CCM-Manager mgcp
CCM-Manager config server 192.168.6.10
!
MGCP
type of service mgcp MGCP call-agent 192.168.6.10 version 0.1
MGCP ecm t38 fax
!
profile MGCP default
!
SCCP local Loopback0
SCCP ccm 192.168.100.1 ID 1 priority 1 version 7.0
SCCP
!
SCCP ccm Group 1
bind the interface Loopback0
associate the ccm 1 priority 1
the associated profile 1 save CME-VOUGEOT
!
transcode dspfarm profile 1
Codec g711ulaw
Codec g711alaw
Codec g729ar8
Codec g729abr8
Codec g729r8
Codec g723r53
maximum sessions 2
associate the PCRS application
!
voice pots Dial-peer 3001
destination-model 3001
port 1/0/0
!
Dial-peer voice 1000 voip
destination-model 2...
session target ipv4:192.168.3.1
!
voice pots Dial-peer 3002
destination-model 3002
port 0/1/1
!
Dial-peer voice voip 5000
session target ipv4:192.168.4.1
incoming called-number 3...
!
!
!
!
phone service
5 units of sdspfarm
sessions to transcode sdspfarm 2
sdspfarm tag 1 GUY-VOUGEOT
Logout em 0:0 0:0 0:0
Max-joined 4
Max - dn 4
IP source-address 192.168.100.1 port 2000
MAX conferences 8-6 win
transfer full-consult system
create a cnf-files version-stamp 1 January 2002 00:00:00
!
!
!
Line con 0
password 7 09404B 06150018
opening of session
line to 0
line vty 0 4
password 7 11051C0A1B1704
opening of session
transport of entry all
!
Scheduler allocate 20000 1000
end

CME-Legacy #.

Any help would be appreciated

Concerning

Technically, this isn't a CUBE configuration. The calls come in via a VOIP dial-peer and they are sent to a pots dial-peer.

Can you get debug voip ccapi inout of R2. We have to see what happens when the call comes in on this router and why the call disconnects.

If you can put the debugging in a text file and join here it will be better to post directly here

Please note the useful messages

"For the love of God is broader than the extent of the human spirit and the heart of the eternal is most wonderfully kind."

Tags: Cisco Support

Similar Questions

  • With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

    With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

    bjmrao wrote:

    With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

    Please ask Whatapps since you use their app.

  • AP DO NOT RECEIVE CALL ANSWER?

    Hi, I have just connected my 1130ag ap to the network noticed that he cannot get a response from join. as follows:

    bymydesk #.

    * 00:00:25.294 Mar 1: % LWAPP-5-CHANGED: LWAPP changed state of DISCOVERY

    * 1 Mar 00:00:35.698: LWAPP_CLIENT_ERROR_DEBUG: spamHandleDiscoveryTimer: found the disco

    same response from MASTER Mwar

    * 00:00:35.707 Mar 1: % LWAPP-5-CHANGED: LWAPP changed State to ADHERE

    * 1 Mar 00:00:40.707: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: has not received the J

    response of ISO

    * 1 Mar 00:00:40.707: LWAPP_CLIENT_ERROR_DEBUG: no more AP manager IP addresses remain.

    * 00:00:40.746 Mar 1: % SYS-5-RELOAD: reload LWAPP CUSTOMER the request. Reload reason: FACT

    NOT GET A ANSWER TO JOIN.

    * 00:00:40.746 Mar 1: % LWAPP-5-CHANGED: LWAPP changed State to DOWNXmodem file system is

    I looked in the forum and other people have had the problem and indicated it could be a problem of time to date. I put the date and time, but when I do a 'show Auth-list' I get nothing like the following:

    (Cisco Controller) > auth-list

    (Cisco controller) >

    can someone help please, I don't know what else to do

    Happy to help you.

  • BlackBerry Smartphones BB9900 not receive calls and phone locked on the previous disconneted display screen

    When I press the phone icon in the previous screen "disconnected" appears. I can't access the keypad to make a call. I am also unable to receive calls (the telephone does not ring) even if I receive a text message indicating that I missed a call

    Always start with a battery pull when things do not work correctly with your phone.  Remove the battery while your phone is on, then replace it.

    Let us know if that does the trick.

  • Receive "remote procedure call failed and did not execute" on several files or folders

    I get this error message when you try to open all folders ".  That is to say - 'profile by default', default, computer, administrator and three records under my name.  Also when I try to open the Control Panel, I get...: {26EE0668-A00A-44D7-9371-BEB064C98683} \0 "remote procedure call failed and did not run".

    This leaves me no way to even check the status of all.  Does anyone know why I get this message? And more important still, how can I solve this problem?

    I guess maybe I should say that I have not tried to restart my PC.  I will try that next. But, even if the issues go away, I would really like to hear what caused it.

    Thank you

    Barb Morris

    For memory than usually Service error RPC does not work, but it should always be running and takes an extra effort to stop it if something went haywire somewhere.

    If the Service or the system is not afflicted in other cases restart is a good first move.

    Your mistake could have resembled these examples from my notes:

  • Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

    Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

    Greetings jenniferfrom46,

    From your post, I see that you are unable to make phone calls. I count on the ability to use my phone a lot to make calls, so I can understand your concern. I will be happy to provide you with some information for you.

    If you can not make or receive calls on your iPhone, this article goes on measures to take to help with the issue you are experiencing.

    Have a good!

  • iMessage problem does not receive past messages

    I recently left the country for a month had to remove my sim card to avoid any roaming charges. When I came back I put my card back in and realized that I had not received one of my last iMessages or missed calls a month. Even during my trip, I had wifi but without the sim card I have still not got any iMessages. I called apple about the problem and my phone carrier and have updated my phone to the latest version, but nothing has worked for me. Basically, I'm trying to just go back one month messages and missed calls that may be important for me. Any thoughts?

    You will get back iMessages old. They are not be stored anyhere for you to recover from. In regards to missed calls, I'm not aware of your rack system record any kind of list of missed calls, but the carrier must be the one to answer that question. Unless the caller has left a voicemail, calls are gone.

  • I have not received a Toshiba Recovery disk

    Hello

    I did not receive a recovery disk toshiba that I need right now

    can someone give me options to help me solve this problem, I need to do this since I need to study and I need a disk to reboot now

    Please you guys can help me

    Thank you

    feel free to post if you have any ideas

    Hi mate

    Books do not come with recovery disks.
    You must create the clean disk with pre-installed tool called Toshiba Recovery Disk Creator.

    In the worst case you can also order one from here:
    http://backupmedia.Toshiba.EU/landing.aspx

  • Do not receive incoming or able to do Win 7

    This just started happening to me this morning, I don't know what the problem is. My friend is trying to call me, it's not just appear on my end. I try to call him, he said, he does not receive a call. I reinstalled, I went down the versions, then when this difficulty DINA I have updated again. I rebooted my router, my pc, does not. I deleted the folder appdata % Skype and also, that did not fix it. Do not even tried calling on my phone and that is.

    Have you tried to call another contact?

  • Satellite P300 - 18 M BSOD - clock interrupt was not received on a secondary processor

    Hi all

    Someone at - there that experince...

    Just got my P300 - 18 M returned by ASP, HARD drive replaced under warranty repair (1 month)

    They also clean installed Vista home32

    Am back today & put up, intermittently (at a few minutes of typical) the machine either completely crashes OR I get a blue screen saying "a clock interrupt was not received on a secondary processor" then restarts the machine and even in a few minutes.

    I can call ASP/Toshiba UK tomorrow, but more help would be anyones experience of it.

    Thanks in advance
    Andy

    I don t think you could solve by yourself.
    That sound very strange error message and I presume that this problem could be linked to the hardware problem possibly the issue of the mobo.

    It was a good choice to get back to the ASP allows to wait what will tell the technician this topic

    Good luck

  • OE, send emails, but do not receive not.

    For two weeks about once a day opening OE would bring a box with my email and password asking me to check.  Clicking OK did not help.  OE would remain in mode "allow."  I could close OE, try again and it would work normal.  Ago about the same problem, but then the OE began not to receive emails (although got them all morning).  I called my ISP, AT & T U-Verse.  They reset my password and permission no longer appears, but I still could not receive emails.  They had me go to properties in OE and change the mail incoming (POP3) from 110 to 995.  It also did not help.  I can open OE, send emails and one sent to myself; It is located in the sent folder and appears in my Inbox on the server.  I get this message:

    The connection to the server has failed. Account: 'mail.bellsouth.net', server: 'mail.bellsouth.net', Protocol: POP3, Port: 995, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E

    AT & T/Yahoo does now host Bellsouth mail with different parameters?

  • Cisco E1000 does not connect to internet-do not get the Comcast modem DHCP ip address

    Very strange problem...

    I have Comcast HSI and use my E1000 Cisco (Linksys) for about 3 years now. Bought as a refurb.

    My problem is that the E1000 is NOT receiving DHCP of my modem Comast info.

    Internet works when my laptop is fixed directly to the modem; but when he connects to the internet port of the modem

    to the internet port of E1000 is NOT attract my IP from DHCP ISP so no client can broswe 'wired or wireless.

    I've even updated the firmware and starting to think its time to get a router 'NINE', as it is NOT LOGIC!

    I can't release/renew as I have NO ip address for free.  I tried to configure the E1000 as static

    using the ipconfig/all for when the laptop computer and the modem is connected. Comcast said they don't see anything on their end.

    I also have factory default router and Redid the config without result.

    Any help would be appreciated.

    You must activate the clone MAC address of the router to recognize the connection to your cable modem. The link below will tell you how to configure the router to work with a connection cable and how to clone MAC address.

    Setting up a Linksys router with cable Internet service

  • Cisco connect does not detect not not previously configure router?

    I tried to reinstall cisco connect on a new computer because my old is broken. I downloaded the software from cisco connect to my router model. In the manual it says that he would invite me that my router has already been put in place. However, I did not receive a command prompt, and he continued to try to set up the router again. I cancelled all upward and I don't know what to do. Should I go and set up again? Are there risks in addition to losing the settings and passwords?

    Thank you! -In exodus

    Hi InExodus,

    What is the model number of your router? He invites you the router is already set up, it asks you a username and password? Coz if it ask you this question. You can simply enter the key ssid and the security of the router, and you should be able to continue with the set up. But it will help if you post the exact error message or error code...

    Thank you

  • Error 0x800ccc0f of Windows Mail. Could not receive new e-mail messages.

    original title: windows mail Error 0x800ccc0f

    Hello fantastic support network. Read these previous responses, but none of the work steps or apply here.

    It is a January 2009 HP Pavilion dv6-1030us notebook PC that is pre-installed with VISTA. I immediately

    client Windows Mail enabled & his works well on AT & T / yahoo mail Uverse. Microsoft Security Essentials is my protection.

    * November 30, 2011, receive POP3 abruptly stopped at ~ 15:00 but SMTP sending worked. With the help of the

    send-receive button gave the infamous 0x800ccc0f. Another IMAP account has always worked in the MAIL client.

    * The process of POP e-mail is reported in the normal status window: it's the same as always... connection.

    authorizing, receive the list messages BUT the thermometer progress bar passing ~1/2 THEN gets busy Vista circle

    appears when the cursor is in the window and the (not answer) appears in the top bar of the box, the grey-out box

    and after 30 seconds or an eternity, ERROR 0x800ccc0f and all its gory details appear in the ERROR tab

    * Web browser email AT & T has always worked well. If I was logged into that or not, the E-MAIL client still not receive.

    * Yes, I checked reentres changed settings / taken secure... as other suggested aid. What I used was correct.

    * Do not know how to really kill uSoft essential security of Virus dead... few have suggested these things can get in the way.

    But I can turn it off & see a message "WARNING do not set" "so I guess than her off, but the problem persists in both cases."

    * Later, I took a bunch of updates for Microsoft VISTA that I've been holding on & without change.

    * AT & T help pages wrote that the server names had been migrated from pop.att.yahoo.com to inbound.att.net

    (similar to smtp) so I changed those back & before but nothing has changed functionally.

    * Called people helping AT & T & they checked my e-mail & server was OK, like many, they might say.

    "" * In despiration I have set up a new MAIL account unsing the identical info and checked the box of "synchronize".

    (on the opening tab properties page) & unchecked that box on the original account. NOW, the send/receive

    Downloaded ALL my mail on the server since the dawn of time to the account, 20 000 + articles. About 4 hours

    later, I got an inbox stuffed to date. Thought, it has been fixed. The next send/receive button & ccc0f ol ' was back.

    The workaround is sending web mail to my IMAP but that gets old fast.

    * Please do not solve dodging & me migrating to a different E-MAIL client, unless you can prove that all my finicky files

    & This will be moved as if by magic.

    * Yes I made backups of Vista on an external hard drive... but the idea of a clean full ERASE & reinstall all

    to fix some broken uSoft code is disgusting.

    * I am ready to use reliable tools to repair if they are really clean. I can't find the armories of install any MAIL in this

    the machine then that under XP, settings, and programs offered remedial functions.

    The computer is a tool for my business & life, not a hobby or pastime or vocation.  I just wish it was broadcast as if it were.

    * If I appeal to you, the experts. Thanks in advance! RFjock 12/17:30 Chicago 10.2011

    Bruce asked jumping me in here, because I'm more familiar with Winmail and the database and I wrote WMUtil.  The reason why I wrote this is because there is no easy way to manually compact the database, and WMUtil simply encapsulates the MS utility to make it easier for users.

    Here are a few suggestions:

    If you have the WinMail gadget running, get rid of it.

    For MSE, go to settings and disable the eml file type analysis.  Which prevents the eml files scanned and deleted, resulting in a database inconsistency that corrupts the database (fixes WMUtil).  If you are unwary enough to open an attachment infecting, MSE will always be in the background to block.

    Your problem is caused by one of the two possible, from what I can discern.  The database in Winmail opener could have been damaged, you can run WMUtil (and let him finish.  If you are worried, then do a backup of things, if you do not already have (see www.oehelp.com/backup.aspx#wm)).  Then see if the e-mail problem accounts work.

    If you get the error, then the other question could apply, that is, there may be a problem message on the server that cannot handle Winmail and generates the error.  In this situation, you will need to identify the problem message and get rid of him.  Since you already have 2 copies of your 20,000 messages that you have in the POP3 Inbox, I suggest that you create a new folder of mail on the server and move messages from the Inbox to the server to it.   Then add another copy of the POP3 account in Winmail and see if it will download the most recent messages.  Who can get rid of the question then.

    See if any of this helps.

    Steve

  • Receiving the message "Wireless association failed because Windows did not receive response from the access point or wireless router" _

    My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.

    I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.

    I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.

    I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n

    I need step by step instructions on this Yes please treat me like a fool!

    Thank you

    Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)

    After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!

Maybe you are looking for