call of duty 6, I installed and the game is choppy... help me please if you can ty... _

Why is my jerky game I am running windows 7 whitch is classified in the specifications compatible if you can help I'll b very grateful...

gajie and jackson369,
First thing to check is your hardware drivers.  Make sure you have the latest drivers installed for all of your hardware (video, audio, NIC, chipset, etc...).  If you still have a problem then perform a clean boot to verify that no other software is in conflict with the game.  You can also try to lower the video settings in the game and see if it improves it.    Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • My parents has been removed and the game of solitaire on their computers. How can I find and download one for them

    My parents has been removed and the game of solitaire on their computers.  How can I find and download one for them

    You still have the Windows CD?

    Follow these steps how add or remove games in Windows XP
    http://support.Microsoft.com/kb/307768

  • I TRIED TO INSTALL AN UPDATE BUT A DIDIN'T GET INSTALLED AND THE ERROR IS CODE 52D?

    I TRIED TO INSTALL AN UPDATE BUT A DIDIN'T GET INSTALLED AND THE ERROR IS CODE 52D?

    Hey alisan, Jean Marc.

    On what update did you get the error code? Check the history of update Windows for the exact number of KB.

    1) click on the Start Menu.
    2) click on all programs.
    (3) when the window opens, click view update history in the upper left corner of the window.

    This gives the full list of recently made updates and also the status of the installation as if the update installed successfully or not.

    If you have not updated, take note of the corresponding article.

    Now visit http://www.microsoft.com/downloads/en/default.aspx , enter the KB article number and download the update of the same.
    More often than otherwise, it should get installed from the download above.

    Just in case you have trouble to install the same, consider resetting your Windows Update components after which the installation from the source folder.

    Click automated Microsoft Fix it to reset the components automatically.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    This should be it.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

    When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

    Hi Scarface0721,

    Welcome to Microsoft Answers Forums.

    We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

    (a) game in which you try to read?

    (b) have you been able to install and play the game before?

    (c) you are trying to install the game to your computer from the disk or directly trying to play from the disc?

    Method 1:
    Try to install and play the game in a different computer.

    Method 2:
    Try another disc and verify if you are able to install the game.

    Method 3:
    You can also post your request in the following forums site.

    http://forums.gamesforwindows.com/

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Several windows updates are not installed and the error code given is 66A

    Original title: updates

    Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

    Hello

    1 did you change on your computer before this problem?

    Follow the suggestions and check if it works.

    Method 1

    You can reset Windows Update components and see if it works fine.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Method 2

    You can download and run the system update readiness tool.

    Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
    http://support.Microsoft.com/kb/947821

    See also:

    Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

    http://support.Microsoft.com/kb/2507641/en-us

  • If you install and activate your Lightroom on a single computer, and dies from this computer, is it possible that you can use the same serial number on another computer?

    If you install and activate your Lightroom on a single computer, and dies from this computer, is it possible that you can use the same serial number on another computer?

    With most of their applications, you can disable it on a single computer, and then turn on another.  I'm not 100% sure of Lightroom, however.

  • Just purchased lightroom 6 boxed version, try installing and the display shows 'no internet connection' when in fact my connection is good

    Hello

    Need help desperate please

    Just purchased lightroom 6 boxed version, try installing and the display shows 'no internet connection' when in fact my connection is good

    Hi TomasB,

    Please reset the file browser & Internet hosts.

    Reset Internet Browser refer: change or reset the settings of Internet Explorer - Windows help

    • Close all windows of Internet Explorer that are currently open.
    • Open the office and then tap or click the Internet Explorer icon on the taskbar. Change your settings will affect Internet Explorer and Internet Explorer for the office.
    • Press or click the Tools button and then tap or click on Internet options.
    • Press or click on the Advanced tab, and then tap or click Reset.
    • In the reset Internet Explorer settings dialog, tap or click Reset.
    • When Internet Explorer has finished the application default settings, press or click on close and then press or click OK. You will need to restart your PC for these changes to take effect.

    Reset the hosts file

    Reference: https://support.microsoft.com/en-us/kb/972034

    Mac: How do I edit the file Hosts on Mac OS X - TekRevue

    Reference: Solutions to connection errors, activation and connection with Creative Suite and creative Cloud applications.

    Let us know if it helps.

    Kind regards

    ~ Mohit

  • Is it possible for me to install Muse on my student computers if they have a CS6 pre-installed, and the school has a "software assurance"?

    Is it possible for me to install Muse on my student computers if they have a CS6 pre-installed, and the school has a "software assurance"?

    Hi stefanzethraeus,

    In order to get Muse on multiple computers for educational purposes, you need to get Creative Cloud for enterprise education subscription; See here: creative cloud for education. Educational institutions

    Hope this helps,

    Emily

  • A few questions regarding the hardware upgrade and the games on Satellite Pro 2100

    Hey,.

    I thought that posting this here because it's more about the lines for the games I could think on another topic.

    I'll get to the point... Basically, I bought a laptop from a guy that my friend knew. He barely used this laptop and didn't know anything about computers, and he tried to avoid as much as possible. So he got rid of this laptop for me for real cheap.

    Now I got it, I had expected either of two things with the laptop.

    (1) what I'll use it so I can sit in his bed and travel a little bit while having files, movies, music and internet access. (it wasn't my main idea)

    Or

    (2) it allows to play video games on it, or to update, so I have a better chance to do so.

    I was hoping to get for video games, mainly for my brother to use because his computer is lagging a lot while playing world of Warcraft. I was hoping that this notebook would give him a better experience for a while.

    But as I was installing the game on this, I noticed that the disk space is low, so I'm going to buy an external hard drive, so I can send files between the PC and the laptop, and I got an error message saying that the RAM was under "minimum requirements" for WoW.

    So I know that I got to level it with something big, but I know not what, so I'm not quite sure that this laptop will run the game at a decent rate. So I thought that I turn to a computer forum and ask.

    It's my laptop;
    [Satellite Pro 2100 PS210E | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook = Yes & PRODUCT_ID = 45659 ie]

    This laptop will do the job don't you think?
    Or it will be better for simpler things, or less if I had the ram to 1gig?

    I don't know much on the laptop, and I'm not really willing to spend too much on fixing, if it's just a change of the ram, then it wouldn't cost much for than to upgrade around 1gig.

    Hello

    First of all, I must say that this notebook belongs to an older series laptop.
    It was equipped with the 1.8 Celeron CPU, 256 MB RAM, 20 GB or 30 GB HARD drive and a 16MB graphics card internal.

    What you can do is upgrade the RAM up to 1 GB (2 x 512 MB) and the HARD drive. But I think that the maximum size of HARD drive that would be recognized by the BIOS is 120 GB.
    I think that the laptop supports one IDE controller and it limited because of the 28-bit LBA HARD drive size.

    So finally, it is important to mention that you can not pass the graphics card because it s soldered onto the motherboard. Upgrading the CPU is not possible or very difficult.

    I come to the conclusion that you will not be able to play games of new generation on this machine. The hardware specs are maybe too low a few simple games would run on this laptop but I'm sure that other newer games will not run smoothly.

    Welcome them

  • I opened the game client for life despite the installation of the game has stopped working properly and the game closes that I said?

    I opened the game client for life despite the installation of the game stopped correctly and the game closes that I said?

    Hello

    What operating system do you use?

    I suggest you to follow the links and check out them.

    Method 1:

    Problems installing and uninstalling programs on Windows computers

    http://support.Microsoft.com/kb/2438651

    Method 2:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • screen flickers and the game stops, and table appears all playing the cfs3 game

    Original title: cfs3 crashes to the desktop

    Hi, a friend gave me used fcs3. It installed fine, everything works fine, but after 30 to 60 minutes, the screen flickers and the game stops, and my table is displayed. I get no error message at all and I went topics in microsoft help for cfs3 specific website if overwrite problems cfs3, which there was a huge page full of symptoms and types of accident etc but since I got no error message number refer to I have read the whole search'm thiing and the causes and resolutions , but found nothing there.

    I tried to restart and the program should run for a while then crash and return to the table.

    I tried uninstalling and reinstalling, but I got the same results.

    HP a6110n

    AMD Athlon 64 x 2 Dual Core processor 4400 + 2.30 GHz

    RAM = 4.00 GB

    32-bit operating system

    Note Windows experience 4.9

    80% of my disk space is available.

    Also the power supply 450w

    Map of Envidea 8600

    Whole body there suggestions?

    Thank you, Ed S.

    Hi P.K.

    The information and links have been informative and educational and I'll save that for a later use. However, the graphics card was the problem (I discovered) so I'm upgrading and also I move FSX on my new pc (a pc gamer VELOCITY) and it works perfectly. Thanks again for your contribution.

  • Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

    Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

    # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to allow standard users to install and run games?

    I want to enable a standard to install and run games and such user account but I keep getting guests for an admin password, I tried to disable UAC, but I'm now just get guests who say that the administrator can install only. I would like to be able to do this without having to turn off UAC.

    You must have administrator rights to install anything, period.  Trying to allow standard users just did, it's as if we were trying to be a little bit pregnant. :-)

  • How to calibrate the screens of Adobe products? For the most part, I'll use Illustrator and Photoshop.Can someone make a difference between the calibration and the Hardware calibration software using (Spider)? Thank you.

    How to calibrate the screens of Adobe products? I will mostly use Illustrator and Photoshop.Can make all the difference between calibration and the Hardware calibration software using (Spider)? Thank you.

    I use U2415 from Dell.

    I use the Spyder Pro 4. The process is quite simple - install the software, plug the Spyder and follow the steps listed in the program. I would recommend also, install the latest version of the software directly from the site of Datacolor instead to install from the disc supplied (probably outdated).

    Benjamin

  • I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?

    I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?

    Have you done something after their show.

Maybe you are looking for

  • Message no longer works on my Air Office

    MacBook Air (11 inch, mid 2013) DDR3 4 GB 1600 MHz Yosemite 10.10.5 (14F1605) Just "upgraded" to an iPhone 6 and 9.3 iOS. Message on the desktop of my computer, does more to send instant messages to my contacts. I have AOL, Yahoo and Google accounts

  • Could not load some site

    Hello I'm new to Mac and used the iMac for 4 months. Starting yesterday I noticed that some site are no load, while others are very well. I tried it with Safari and Chrome, and the result is the same. However if I restart in safe mode these Web site

  • Satellite A210-15J WIFI problem

    Hello I just bought this Toshiba laptop (with Windows Vista installed) today and it worked great... until that for any reason any wireless has stopped working. I did the update of windows and rebooted, it and started to get an error of the driver: 'U

  • Acer gateway ne570 won't boot upward and I tried the bios and it always detects the hard drive

    I have an acer gateway ne570 and it does not start and I tried the bios and it always detects the hard drive but first boot priority is boot windows which is the only thing on the menu Manager startup options when you press on enter where the box "no

  • How to open windows xp without reboot pc__

    How to open windows xp without disconnection Windows Vista