Call the m4 video aqua Xperia

Similar Questions

• When I make a video call, the image and sound frequently burst

  Original title: I.M video calls

  When I make a video call the image and audio break-up often so that the link falls down and I have to again open the link that can be very frustrating

  Hi geraldmallinder,

  1. What instant messaging program that you are using?

  2. were you able to make video calls before without any problem?

  3. you will remember to do recent changes on the computer before this problem?

  If you use Windows Live messenger, you can consult the following articles and check if that helps:

  Impossible to establish a webcam with Windows Live Messenger conversation

  Free chat: use instant messaging and webcam to stay in touch

  With the help of your LifeCam with Microsoft Live Messenger

  Hope this information is useful.

• Hi all! Is it possible to show the caller with a video ID?

  Hi all

  My problem is that, suppose someone calling me and at the same time I want to see the CALLER ID and video. Please let me know if it is possible or not blackberry, if possible, how can we do?

  Your views will be highly appreciated!

  Thank you very much!

  Mahendra Singh

  Hi Simon,.

  You mean, we show a video as well in a predefined area of the screen and identification of the appellant by remaining part of the screen.

  Thanks a lot again! Simon, you were the first person here on the BB forum, who greeted me!

• To make a video call the person who receives the call can't see me, but they can hear me, why?

  Original title: Microsoft lifecam

  To make a video call, the person receiving the call can not see me, but they can hear me

  Hi Eddie,.

  As the person receiving the call is able to hear and unable to see, we need to check if the video settings are set correctly.

  Which application do you use to make video calls?

  While you reply us with the above information, see the following links:

  From the following link, refer to the "I can't start a video call".

  Troubleshooting: Webcams

  http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/webcam/LifeCam-Setup

  How to make a video call?
  http://www.Microsoft.com/hardware/en-in/help/support/how-to/webcam/VideoCall

  With the help of your LifeCam with Microsoft Live Messenger

  http://support.Microsoft.com/kb/921332?WA=wsignin1.0

  Hope the above information is helpful.

• call the problem with ip video phones

  Hello world

  We have a video infrastructure where

  (1) vcs control x7.1

  cucm 2)

  (3) SME session manager edition

  call flow between endpoints

  video endpoint-> control->-> cisco cucm area vcs session manager-> cucm-> cisco iphones edition

  facing problem

  (1) while the call to the ip video endpoint phones video, he shows is not the E.164 no (caller ID)

  audio/video 2) not received when calling video endpoint video ip phones

  attached are the newspapers of vcs xstat and vcs xconfig

  Rashmi,

  No problem. If possible mark the thread as answered

  Thank you

  Alok

• How can I male Firefox open the YouTube videos and youtube pages application?

  I tried to watch a video on the youtube page, but I got a message saying that the video was not available for mobile devices. I really want to watch this video, then I tried exactly the same page with the browser android... guess what? the browser has sent the link to the youtube app and I watched the video without problem.

  So, how can I make Firefox call the youtube app instead of lie to me?

  An example: http://m.youtube.com/watch?v=2zI4Hl02898 & feature = youtu.be & desktop_uri=%2Fwatch%3Fv%3D2zI4Hl02898%26feature%3Dyoutu.be

  Hello Doideira, you can do the video in the youtube app open when you press the little android icon in the right corner of the address bar when you're on the site.

• Factory default files (pictues, music and videos) for Xperia Z3

  Hallo,

  could someone share the files to factory default (pictues, music and videos) for Xperia Z3?

  Or where I could download the files?

  Thank you

  @RaceFace85 @aier 

  I'll transfer the images and music files

• Is it possible to call the api native playbook of QT creator?

  Hello

  I'm currently learning the playbook with Qt development.

  For this I use Qt creator to develop the specific application of the user interface.

  I want to know that is it possible to call the api natives of the application that is, I do in QT creator.

  As I want to include a video and audio player in my application.

  It is easier in the native api for use of this feature.

  In QT, I found it in the QT mobility and with phonon, but two of them are not supported on Playbook.

  So please guide me with my problem.

  Thanks in advance.

  bskania.

  Sorry, drop the. at the end: http://qt-project.org/wiki/QNX

  I never used the BB expected build but it's a bit old so it would be logical that you must use Q_OS_QNX vs Q_OS_BLACKBERRY. You can post the results of compilation using Q_OS_QNX?

• The dvd on the s-video output display problem

  I think I am doing something stupid, but I can't understand it.  I used my T40p for many years, inclunding using the vga external display monitors and digital projectors player.  For the first time, I wanted to use it to view DVDs on a TV using the s-video output capacity.

  I activated the s-video and connected to the tv without problem.  My office is correctly displayed on the TV.  However, when I use the dvd playback software to show a dvd, the tv does not display the content.  The content of the dvd shows correctly on the computer screen, but not on the TV screen.  If I use the view "full screen", nothing shows up on the TV.  If I show only the dvd in a window, then everything on the desktop is shown properly on tv, except the dvd window is blank.  Yet once, it appears correctly on the computer screen.

  I have tried various software to media, including intervideo WINDVD and Classic Media Player player.  I tried PAL and NTSC discs.  No difference.

  I think I'm missing something obvious.  Any ideas appreciated.

  T40p 2373-G3U, 1600 MHz, 1 GB RAM, WinXPP SP2.

  1400 x 1050 with ATI Mobility Fire GL 9000 LCD display adapter display.

  OK, I solved this problem myself.  The solution is to use a configuration that uses ONLY the external display.  Apparently if you enable the output s-video, but do not turn OFF the LCD screen, the video card only then produces the dvd on the LCD, not s-video content.

  There are two ways to select the s-video output only.  Go to settings-> control panel-> thinkpad configuration.  In the window of thinkpad configuration, at the top left, there are five buttons to activate different display configurations.  One of them is "tv only".  If you click this button, the LCD of the computer stops, and the s-video output became active.  Showing a dvd in this configuration using intervideo WinDVD or other programs video display shows the contents of the dvd to the TV via the s-video output screen.

  The other way is to implement a model of custom view using the Director of 'presentation', which is accessible from the 'thinkpad configuration' window described above.  It is available under the "view" dropdown  I created a custom method called 'dvd' that automatically sets the external screen in 640 X 480 resolution.  This is consistent with my standard TV ntsc resolution and avoids the need to change the display resolution before you activate the s-video output.  I choose this plan using the key FnF7 is quick and easy.

  Hope this is interesting to someone out there.

• Export the same video optimization

  Hello

  I have been using Premier Pro for a small video project and I'm really happy with the software. The only problem I had was that every time when I export the video (with the same format of video/audio) for even the "small changes" (like changing a word in a tag), takes about 20-30 min (ASUS X550ln).

  Given that all other parts of the video are unchanged, is it possible to keep the cache (optionally) since the last export in order to reduce the time for export again (when the audio/video format is the same)?

  Thank you

  What you are looking for is called smart rendering but that is available for some formats.

  Smart Rendering in Premiere Pro CS6 (6.0.1 and later), & first Pro CC

• Embedded in the .swf videos don't play not if using a UNC name

  My training department uses articulate them Storyline 2.4 to create .swf.

  If the story is called by the \\servername\share\story.html (or .swf) the embedded video will not play. The animation within the .swf works fine.

  If the story is called by the X:\story.html (or .swf) the embedded video plays very well.

  Adobe Flash Player 19.0.0.207

  I understand the work around is to map the letter drive, but for security reasons, I am unable to do this.

  Does anyone have an idea about it or an official statement of Adobe that said UNC are not supported?

  Thank you

  Jim

  Have you tried to use a Flash Player debugger to see if there are useful errors?

  Adobe Flash Player - Debug downloads

  I would start there, or with a web debugging proxy like Charles or Rot.

  You can also consult the section on cross-domain policy files:

  White paper: Adobe Flash Player 10 security | Adobe Developer Connection

• Cannot publish projects with the inserted video - video The Flash error message cannot be loaded

  I created a Captivate 6 project with two blades which have inserted videos in their

  The two videos were created in Captivate 6 by publishing these projects as the mp4 videos

  They play very well in previews, but when I get the error saying Flash video can not be charged for two of these slides and in the output files, the video field is empty.

  I checked that videos are not open everywhere else that I saw on a previous post, that was the question, but the only place where they are in use is part of the project, I am trying to publish.

  Here are my settings and the error message

  

  Any suggestions would be greatly appreciated.

  Your screenshot shows that you publish in a folder on a network drive.

  You have:

  • Check if the movie file exists in the location of the published folder? (It should ideally be sitting in the same folder as the SWF file calling it.)
  • Check that the location of the folder is defined as a location approved in your Flash Global security settings?

• Function to change the mp3 and the framework (video)

  I am currently working on a music website that has a custom built-in mp3 player, where the script action calls for an external xml. It works beautifully. It's all about a frame... in the back of the radio is edited video that I handled in final cut. I have buttons next and pre who call the XML. What I'm trying to do, is change the video when the song changes. I'm not sure if I call a fuction to the next section of the button + or - 1 or if I can call the video to xml. I'm a graphic designer learning code and do not know how to approach this problem. This site is my senior project... Help, please!

  the question is a matter of design.  How do you want your app to work?

  You app starts with an mp3 player and a f4v.   What happens when one who has the shortest duration ends the play?

  your current coding, you would advance to the next mp3 and f4v next which means one or other of the previous mp3/f4v will be stopped before the end.  is that what you want?

• Puzzled - one of the three videos will not play

  Hello! I have trouble getting one of the three that lists Flash (swf) video to play. 3 all play very well locally (swf files and html pages via a browser and window when tested in Flash), but we'll not play once uploaded to the server (Network Solutions). Loads of skin (Controller), but not the video itself – link: http://tripartners.com/Pages/NWDLS/NWDLS_Video_2011/Session1/NWDLS_Session1_Part2.html all 3 went through the exact same process at the same time. As the video plays well locally, and because I re-processed the capricious video over and over again to eliminate the error on my part, I am totally stumped.

  Thank you very much for any assistance you can provide.

  See things, fix its video 2/3 which is the problem?

  I'm using a web debugging tool called Fiddler, and he shows me the URLS of the videos you upload. For the 2nd video, it seems abnormally long, as if you entered it incorrectly. It may have nothing to do with the way that you encoded - video is on the place where he is, or where your Flash file "tent" to locate.

  Video of 2 URL:

  http://tripartners.com/users/judithleslie/1_Websites/TRI_NWDLS/TRI_NWDLS/Web-content/pages /NWDLS/NWDLS_Video_2011/Session1/NWDLS%20Session%201%20Part%202%20of%203.flv

  Also, I got recommned not to use spaces in your file names - instead, use an underscore ('_').

  So I would say that you check the location of your video on your server and then to be sure it's the right URL that you use when the definition that you use only the video for the FLVPlayBack component.

• Just the songs/video missing?

  I have an iPhone 7 more than 128 GB. Unfortunately when I click on 'Video' app on my iPhone, all my music videos, that I bought from iTunes disappeared and moved to the application 'Music'. Now, it's really confusing. Apple seems to break the apps more than fixing. Why? before iOS 10 never comes, iOS 9 worked very well and all my music videos are in the 'Video' app, all my songs are in the "Music" app, not more, there now appear to be broken, involved putting each of them in the application 'music '. Even when I play the video clip in the application of the 'Video' on iOS 9 which usually have closed captions on it, now on iOS 10 in the application 'music' don't have it anymore. ITunes on my PC play subtitles on the music video, I need this back on my iPhone! I have total of 401 songs [for the most part, are ripped from my CDs and some songs are purchased from iTunes included music videos purchased on iTunes] and only 333 is transferred to my iPhone and 68 are missing. I get most videos music and songs that I bought in gray [68 of them are]. I even went to "Purchased" and redownload everything and it remains grayed out... Help? and apple please give these clips in the app "Video!" PLEASE?

  Post edited by: xShaney

  This is a user to user support forum. Use iPhone comments to request features news/restored.

  See download your past - purchases Support Apple and hide and expose the iTunes Store or App Store purchases made on iBooks Store - Apple Support to access the latest purchases.

  The following steps should help with the erratic behavior of synchronization, including the formidable gray traces with dotted circles. They assume that all the content you want on the device in your lending library for the restoration. If not see recover your iTunes from your iPod or an iOS device first. I would also recommend you copy everything off of the camera, if you have not already.

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  Use a backup encrypted if you want to keep passwords, wi - fi settings, history and health web data as appropriate.

  TT2