Calling agents do not return to the Hub

Similar Questions

• Prospective Golf Sports simulation mode full-screen on one monitor, but when it runs the mouse would not return to the other monitor.

  original title: two monitors, mouse stuck
  I'm under Simulation of Golf Sports prospective mode full-screen on one monitor, but when it runs the mouse will not return to the other monitor. It seems that the mouse is not bound by the program, but I want to be able to use another application on the other monitor. Any suggestions?

  Hello

   
  What operating system is installed on the computer?
   
  Method 1: You can press the Windows key on the keyboard that appears in the start window and your mouse will automatically gets shifted to the main monitor.
   
  Method 2:
  (a) click Start, type change the mouse settings.
  (b) go to the pointer Options tab of
  (c) uncheck Display pointer trails
  (d) click apply and OK.
   
  Method 3: See if he has all the parameters of the Simulation of Golf to release the mouse button.
   
  If the methods above do not help, you can contact the Golf Simulation for additional help.
   

• Small Bug: Detection of people - O key does not return to the grid view

  Windows 7

  When I tap the O key, I will in face detection module.

  But when I hit the e key O once again, I do not return to the display of the grid.

  To do this, I have to click on this icon to return to the display of the grid.

  

  The grid view is always key G

• Hi, I have another problem, when people visit my site that they could not return to the home page

  Hi, I have another problem, when people visit my site that they could not return to the home page

  Hello

  Problem is in outline view.

  Please follow the steps below and you should be all set.

  1. go in the Plan view.

  2. right click on the 'HOME' page

  3. Select "Menu" > "include the Page containing the hyperlink.

  4 save the file and then try to preview.

  

  You should be all set.

  Concerning

  Vivek

• The action of the button Back/will not return to the first page open on a tab

  From a few weeks ago (I believe that when 3.6.16 is released), I lost the ability to return to the first Web site loaded on any tab by using the previous button or right click-> menu back.

  I upgraded to Firefox 4 and I still see the same question.

  This happens if the new tab is created from a link on another tab of an item in my toolbar bookmarks, or if I have on a button open new tab, then the initial Web page in the address bar or in my bookmarks toolbar.

  When I navigate to the second site in this tab via a link, manual entry or a bookmark, the previous button is active.

  If I navigate to other pages and a right click on the back button, the first page I have loaded is not listed in the history.

  It is possible to my modules or something is causing this issue? I can't think of any possible configuration setting that would entail.

  If not, should I submit a report in Bugzilla? I couldn't find a corresponding bug report, but it seems that it would have been stated several times if someone else saw this question.

  Edited to stop scrolling - Maurane

  With the back button does not, problems are caused by the McAfee Site Advisor, if you uninstall or disable this extension, the back button should work again.

• Buttons does not return to the early state in the state machine.

  Hello

  I downloaded a program that is used to back up data. I used a machine to States with different States. State 1 is initialization, where it moves automatically select the State, which allows to select one of the remaining States to copy the data. The selection is made by command buttons. Once u pressed a button, it goes to that respective State and in this state when you press the backup, the backup of data occurs. Once the backup is located the program goes back to the selection state. So far, it works fine. The problem then. Once he returned to the selection state after that copy was made, then none of the buttons are working properly. Then when it goes back to select State and I tried to select a State, nothing happens, not even the stop button works. I don't know why this is happen. Please help me solve this problem. Thanking you in advance.

  You have many States where you have the event structures ("All data" "given more older that '" young data that ' 'Defined Data') (worse there are two of them in "Data set")

  Each of these event structures are for a "Backup" mouse event down.  A singularity is now why you use a mouse event down on a button.  This really should be a value change event.  But this is not the big problem.

  The big problem is that all of these structures events are set to lock the front until the end of the case of the event.  Well, when you click the mouse down on this button, all 4 of these structures tail event this event.  If you are luckly, one of the event will execute and process the event.  Others, that you will never run because the state machine will not get through these cases.)

  You have multiple structures of event you VI and certainly not buried in the event.

  Reading guard and recommendations when using events in LabVIEW

  Then fix your VI architecture.  You must limit the structures of the event or a separate parallel loop, or to a single case of your state machine that your code will frequently return to, without any other user interaction, in order to service the structure of the event.

• BlackBerry 10 Whatsapp does not appear in the hub

  WhatsApp without appears en el hub

  Buenos dias,
  Why Desconozco, pero despues charged her copia of seguridad del movil WhatsApp ha dejado en Hub el appear. Y los adjust hub donde puedes add cuentas del, of WhatsApp no appears there in los adjust whatsapp no veo como puedo hacerlo.
  Tampoco me appears any globo in el icono application cuando me han come messages, I have that application open para verificar if hay algun message. Nada of esto me Scrooge antes tenia el servicio committed Hub integrated en el.
  Tanto del BB10 como WhatsApp estan updated version has the ultima version
  MUCHAS gracias por vuestra attention

  MOD Edit: translation online

  Nice day

  I don't know who, but after loading the WhatsApp mobile backup ceased to appear in the hub. WhatsApp does not appear in the settings for the hub where you can add accounts, and in the WhatsApp settings, I don't see that I can.
  Or I see no ToolTip in the app icon when I received messages, I have to open the app to check if there is a message. None of this, I spent before, had the service fully integrated in the hub.
  The version of the BB10 from WhatsApp are updated to the latest version
  Thank you very much for your attention

  Hola una vez mas @danidesolsona

  If the problem persists como comment deberas realize una software smsxite.com you link to BlackBerry con.

  Respecto a las cuentas esto sucede luego haber refitted you backup, brought please eliminate las cuentas o volver a configurarla una vez mas.

  Of igual manera puedes bajar e instalar las applications Android than Alicia anteriormente y poder seguir disfrutandolas, tras the Restauración not to restauraron are applications do por lo tanto deberas volver a bajar are applications that Alicia anteriormente.

  Saludos.

  Google Translate:

  Hello again for more @danidesolsona

  If the problem persists and you comment Deberas to run a software reload with link to BlackBerry. Regarding the accounts, this happens after you restore your backup, please try to delete accounts or reconfigure once more.

  Similarly, you can download and install Android apps than previously tapeworms and continue to enjoy, after restoring unsaid of third-party applications so deberas to the bottom of these applications that previously had been re-established.

  Greetings.

• BlackBerry Q10 Twiiter does not work in the hub

  Hi Please help my twitter and facebook notifications alert in the hub of bb. When I try tansferring pictures of blackberry links it end with ERROR. It's now my second q10 bb in a week, but both do exactly the same thing. 08/03/2013 all new replacement today 08/10/2013 was the first purchase of the fone

  Correct, the only tweets that appear in the Hub will be those who have mentioned you or direct messages on Twitter.

  The normal timeline Tweets are not designed to appear in the hub.

  What'sApp and BBM should appear in the Hub if you have set up to appear in the hub, doesn't it?

• Call log will not appear in the Simulator

  For some reason the call log manager which is available on my phone does not appear on the Simulator. I don't know if it's a bug or a feature?

  Any help in getting it on the Simulator is appreciated.

  It manifests!

  I was looking for the icon to call log similar to what appears on my phone.

  Who's going to do. Thanks a lot for your help.

• BlackBerry Smartphones my caller ID is not visible on the phone of receivers

  When I call someone, my number is not visible on the phone receivers. I have enabled Caller ID, but it does not always show.

  I have a Bold 9000.

  Any suggestions how to solve this problem?

  Hiya!

  Does show anything at all? or just "Unknown"?

  You said that you check what ID caller is activated?

  Phone key > Menu key > options > General options > Show My Number is set to 'Yes' and limit my identity is set to 'network '?

• IOM, API - getData() - no data is not returned by the user account

  Hi all

  I have a question for the AD account data. The problem is when I try to get the account data from any account (account status: enabled, the account Type: primary), the API GetData returns a blank card and I don't know why. I see this account in the accounts of the user to the IOM. This account has been created through reconciliation of AD and this account is only one (primary and active).

  In the test environment my code works very well, but production only.

  Here is part of my code where I get some details of account.

  ...

  accounts = provServ.getAccountsProvisionedToUser (take);

  Logger.Finest ("getUsersToTheLookupTask-> user Details - take:" + take + ", DisplayName:" + userDisplayName);

  Iterator it = accounts.iterator ();

  {while (IT.hasNext ())}

  Account ad_account = (Account) it.next ();

  If (ad_account.getAppInstance () .getApplicationInstanceName () .equalsIgnoreCase (appInstName) & & ad_account.getAccountType () .equals (Account.ACCOUNT_TYPE.) (Primary)) {}

  Logger.Finest ("getUsersToTheLookupTask-> AppInstance ApplicationInstanceName:" + ad_account.getAppInstance () .getApplicationInstanceName ());

  Logger.Finest ("getUsersToTheLookupTask-> AppInstance DisplayName:" + ad_account.getAppInstance () .getDisplayName ());

  Logger.Finest ("getUsersToTheLookupTask-> AccountDescriptiveField:" + ad_account.getAccountDescriptiveField ());

  Logger.Finest ("getUsersToTheLookupTask-> getAccountID:" + ad_account.getAccountID ());

  String UtilisateurDN = getADUserDN (appInstName, take);

  AccountData accountdata = ad_account.getAccountData ();

  Map < String, Object > accdata = accountdata.getData ();                         //THIS RETURN EMPTY map < String, Object >! And I don't know why!

  Logger.Finest ("--> account data:" + accdata);

  String userOrg = accdata.get("UD_ADUSER_ORGNAME").toString ();

  String userCN = accdata.get("UD_ADUSER_COMMONNAME").toString ();

  Logger.Finest ("-> CN an ORG:" + userOrg + "-" + userCN);

  userOrg = userOrg.substring (userOrg.indexOf ("OR ="));

  String UtilisateurDN = "CN =" + userCN + "," + userOrg;

  Logger.Finest ("getUsersToTheLookupTask-> pair key / value:" + UtilisateurDN + ":" + userDisplayName);

  userMap.put (UtilisateurDN, userDisplayName);

  }

  }

  ...

  You have an idea why I'm not able to get user account data?

  Thank you!

  Milan

  Fact.

  The following API does not return the AccountData in the AccountVO. Old API IOM at 11.1.2.0 in 11.1.2.1 IOM Yes.

  accounts = provServ.getAccountsProvisionedToUser (take);

  If you need obtain account data, use:

  Acccriteria SearchCriteria = new SearchCriteria (ProvisioningConstants.AccountSearchAttribute.APPINST_KEY.getId (), "*", SearchCriteria.Operator.EQUAL);

  accounts = provServ.getAccountsProvisionedToUser (take, acccriteria, null, true);

  ...
  

  AccountData accountdata = ad_account.getAccountData ();

  Card accdata = accountdata.getData ();

  GetData returns then map of attributes as I expected.

• return the empty record only when no results not returned by the main query

  It is a question of SQL (not PL/SQL)...
  
  Let's say I have the following text:
  
  Full_name SELECT NULL, NULL, NULL last_update_date address
  OF the double
  UNION ALL
  SELECT full_name, address, last_update_date
  Employees
  WHEN TRUNC (sysdate) = TRUNC (last_update_date)
  
  If the second part of the query retrieves no rows, it works beautifully and I get a blank line; However, if the second part of the query returns records, I get a blank line over my dataset I want.
  
  How can I create a SQL statement that executes only the first query (before the union all) when no result is returned from the second. Also, I don't want to exceute the query twice only if I can get a count of the records because my actual query is much more complex than the example I've provided here.
  
  Thanks in advance!
  Emily

  Hello

  You can try to use a subquery factoring (WITH clause)
  The query is executed only once, the query results are cached in memory or in a temporary table.
  and you can view these results several times in the main query:

  WITH second_query AS (
    -- your second query here
    SELECT full_name, address, last_update_date
    FROM employees
    WHERE TRUNC(sysdate)=TRUNC(last_update_date)
  )
  SELECT full_name, address, last_update_date
  FROM second_query
  UNION ALL
  SELECT NULL full_name, NULL address, NULL last_update_date
  FROM dual
  WHERE NOT EXISTS ( SELECT 1 FROM second_query)
  

  Published by: kordirko on 2010-07-08 02:02

• application will not return to the page

  I have an application that runs a package oracle.
  
  the appeal in the apex process is something like
  
  callpackage.start_process.
  
  
  
  The procedure is long and it ends, but the page disappears with the package is done.
  
  
  
  This does not happen within the apex, just at the moment where it is deployed and the client calls the server.
  
  This could be just a network issue, but it's a real show stopper, and I could use any info you can give me.
  Thank you
  Doug

  Doug,

  You can use background APEX for long running process tasks. See this link for more details.

  See you soon,.
  Hari

• new agent is not displayed in the grid control

  I got 10.2.0.1 agent registry in the grid control 10.2.0.4.
  
  I remove agent from grid control OEM target GUI interface. remove the home directory of the agent on the target computer,
  can I install a 10.2.0.4 target agent on the computer, but this did not appear in the OEM grid control. Why?
  Thank you.
  
  Oracle2@bclabdb02:/Clusterware/Oracle/agent10g/bin > emctl agent status
  Oracle Enterprise Manager 10g Grid Control 10.2.0.4.0 4 Release.
  Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 10.2.0.4.0
  Version of the WHO: 10.2.0.4.0
  Protocol version: 10.2.0.4.0
  Home Agent: / clusterware/oracle/agent10g
  File binary agent: / clusterware/oracle/agent10g
  Agent process ID: 16470
  Parent process ID: 16454
  Agent URL: https://bclabdb02:1831/emd/main /.
  URL of repository: https://bclabdb03.smc.ads:1159/em/upload
  Starts on: 2008-10-11 21:11:43
  Started by user: oracle2
  Last reload: 2008-10-11 21:17:49
  Last download successful: 2008-10-14 11:47:30
  Total megabytes of XML files uploaded so far: 40,36
  Number of XML, waiting for loading files: 0
  Size of the XML files in the upload wait (MB): 0.00
  Available disk space on the file upload system: 39.20%
  Last pulse in SGD: 2008-10-14 11:51:01
  ---------------------------------------------------------------
  Agent is running and ready

  performance agentca d AOH\bin and still not working, paste the targets.xml

• 29 Firefox "back" button will not return to the previous form

  Previous screen is a form of research and the results returned. Clicking on one 'other info' button moves to the next screen and print more information. The 'back' button will return to the previous screen, which gives the message "document is no longer available.

  Firefox is standard installation of vanilla. All the other major browsers properly return to the previous screen. If this cannot be fixed, we will be forced to give up FIrefox and recommend our customers to 46 000 to switch to a different browser, especially when you use our Web site.

  To reproduce this problem, go to www.mybfl.com/search.php, get a book, when displayed, click on the "More info" button By clicking on the "back" button on Firefox illustrates the problem.

  Yes, Firefox 32 is at the beginning of this behavior.

  I just went and checked tools-> Options-> auto-Cache Management override and for now at least, the problem disappeared.

  Thanks, hope that this action has resolved the problem.