Satellite A100 display empty but external vga works

Similar Questions

• After having cleaned my Satellite A100 display no longer works

  I opened my Satellite A100 to make sure it is clean. After opening it, I decided to close this back. After I put all the screws, and I turn on the laptop, there is no display on the screen but the mother/processor board works very well.

  Also, I reopened the laptop and checked the material and saw that near the port where you can connect a monitor, the white piece of hardware are separated, if I can connect these two back, I think I can make it work.

  Can someone help me please?

  Hello

  Looks like you have accidentally disconnected (removed) the FL inverter cable or video cable that connects the screen LCD with the jury.

  Usually it of not recommended and not recommended to disassemble the laptop if you have no experience. During this process other parts can be damaged and therefore jobs must be performed by a technician for laptop.
  I see that you have already opened the laptop and the warranty is not valid.

  It of always difficult to explain this procedure and so I goggled a bit and found this page useful:
  http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/remove-replace-LCD-screen-1.htm

  The laptop described on the page is a Sat A105 but very similar to A100
  Good luck and be careful.

• Satellite A100 - 906 internal LCD does not work

  Hello, I have laptop Toshiba Satellite A100-906, and I struggle with internal LCD. Only three gray belts are displayed with horizontal lines or without. Backligt works. External monitor works.
  Initially, the screen freezes sometimes but after short time continue to work. But now is still dead.
  What is defekt? LCD or graphics card? It's the Geforce Go 7600 with 256 MB.

  Help, please.

  > External monitor works too.
  You said that external monitor is not affected. Right?

  Well, in this case I think that the graphics card is OK and the problem is related to the internal display.
  If the graphics chip would be affected, both screens would not work properly.

• The Satellite A100 created recovery, but DVD does not start

  I'm trying to reload a Satellite A100 with the DVD that was created when I started the laptop when he bought the news of recovery 11 months ago.

  I changed the boot order so that the DVD is first and when you restart, the drive runs at high speed, so it works

  No option is presented to be able to boot from this drive (as the usual "press a key to reboot from DVD")

  If I press F8 when booting I get a list of the options-led FIX YOUR COMPUTER that is highlighted.
  I then press ENTER and get a message "Windows is loading files".
  The system recovery options are then displayed, keyboard, layout, then the opening of the session, what I do using an administrator account.
  I am then presented with a screen with 6 system recovery options
  -Startup Repair
  -System restore - restore to an earlier point in time
  -Restoration of Windows complete PC (from backup)
  -Windows memory diagnostic
  -Command Promt
  -Restoriing the full Windows operating system

  There are 2 buttons {color: #000000} * low _S_hut * {color} and * _R_estart *.

  When I select the last option all I get is another screen with the message
  The complete oprtating of Windows System Restore *.

  If the pre-installed files are damaged you can use the product Recvoery DVD - Rom to restore (which is what I'm trying to do)
  A caveat against the loss of data is also included and then the OK button which, when clicked on resturns me to the previous screen without action
  If I select shutdown or restart it's there for that and boots from the hard drive.
  The disc is not damaged, I can copy him on system, then one more

  Can someone tell me how to start and recover from this drive?

  Hello

  Sorry, but you have misunderstood something. I'll try to be clear now:

  -Via recovery CD/DVD, you CAN NOT repair already preinstalled the operating system. Using Recovery CD/DVDs, you can make clean OS install only. Please note that, prior to installation, the procedure begins old BONE is removed.
  -Reading your ad, I think that you try to use Microsoft Vista of origin and not the recovery image options because when you start the recovery procedure is no different 6 menus

  Can you please tell me what is the problem with your Satellite A100? What are the files that you are trying to fix? What happens at the start of your laptop?

• Satellite M30 - LCD white but the VGA output is ok

  Hello

  I have a Satalite M30-832, I got second hand. There is no output LCD, alough the lites back works.
  VGA output connector works very well.
  I reinstalled the video drivers and I have replaced the LCD screen, but still no joy.

  My question is, if anyone can help,

  1: what is a hardware (graphics chip) or a software problem.

  2: Diagnistic tools are there on the disc support

  Scarub

  Hi Simon

  I have a question;
  You said that your VGA port is ok.
  You you connected the external monitor that laptop and have you checked if you can switch the display to the external monitor?
  Please check if your external monitor works fine and if something appears on the second screen.

  This procedure would be useful to know what's exactly wrong with your laptop.
  If you would be able to connect the external monitor to the computer and the external monitor works then your graphics card is not faulty and the problem could be related to a defective laptop internal TFT screen.

  Best regards

• Satellite A100 PSAARA - Questions about RAM, VGA and BIOS

  I used Toshiba Satellite A100 PSAARA, now I have a few questions:

  1. I have updated the BIOS for my laptop (new version 6.0 to version 5.10): everything seems to work ok, but after I rebooted the laptop, it automatically connect a black screen with these warning "checksum bad sectors, F1: default settings, F2:..." (remember exactly).
  I pressed F1, my Toshiba reboot works ok after that, so there's something wrong with this warning?

  2. I upgraded RAM to 2 GB (1 GB + 1 GB) with the KingMax brand, if the RAM expandable max I can do on my laptop?

  3. This Toshiba laptop use to edge or video card, I check my Nvidia geforce card real estate (laptop) and I saw this: memory: 256 MB + RAM shared memory: 256 MB = 512 MB of total memory?
  So: can I upgrade my card graph and maximum card that I can use?

  4. I cannot set 75 Hz for refresh monitor, can see 65 Hz

  Thanks for your help!

  1. try to load the default settings in the BIOS. Then it should work.

  2. the Satellite A100 supports 4 GB max.

  3. No, the graphics card can not be changed. It s soldered on the motherboard and cannot be exchanged.

  4. what internal or external monitor? Monitor internal and other s LCD works best with 60 Hz.

• Satellite A100 - display balack after replacing the LCD screen

  Hello

  So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

  When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

  I think it is the inverter, any suggestions?

  Could be the sensor cover?

  Thank you! Kyle

  Hi Kyle,.

  Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

  Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
  Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.

• Satellite A100-1011E - AV button does not work

  Hello world

  I'm new here but I have an urgent problem. I hope that you guys can tell me what to do. I have this laptop SATELLITE A100-1011E model. My AV button which located on the left side of the keyboard does not work.

  I'm sure that it works always 3 days ago, but I don't know what I did and it doesn't now. I n it's a driver issue cause I just bought this phone 5 days ago. I checked with this 'Toshiba' commands in the Panel and I've assigned to the right program (windows media player 10) but it does not work when I press a key.

  Can someone help me with this? :( Thank you very much.

  Hello

  Until you try anything roll back OS to an earlier time using System Restore tool. Maybe it will help you.

  If this don't work let us know.

• Satellite A100 - 02L - Media Player has stopped working

  I have a Satellite A100 - 02L with Vista. I have there two weeks and media player has stopped working, it won't even open. It worked fine when I bought the laptop but not worked for the past few days.
  Does anyone know why it happened or how I might solve this problem?

  Maybe a magician can tell you for sure why WMP has stopped working. Who knows what you have done with it?

  Try to download and install the latest version. Maybe it will be working again.

• Satellite A100-062 - USB mouse does not work

  Hello

  I have a Satellite A100-062.

  I've never been able to get a USB mouse to work with her.
  The OS is Vista Home Premium, whenever I have plug in a USB mouse, the operating system detects a device has been connected to the USB port, but eventually the message material has not installed successfully.

  So I have to rely on the touchpad, the problem seems to be limited to mice only, I've successfully used a USB webcam without incident.
  I tried several USB mouse with the machine exclude a problem with my original mouse.

  Has anyone else had similar problems?

  Thank you

  > So I have to rely on the touchpad, the problem seems to be limited to the mouse only, I have successfully used a USB webcam without incident.
  Looks like a problem with the USB mouse and not with the laptop or with USB ports
  I would recommend testing different mouse and using the other.

• On the Satellite A100-784 Internet connection does not work

  I use a Satellite A100-784 with Vista Home Basic and a US Robotics router. My question/problem is that when I discover the network connection, it shows I am connected to the router, but not to the internet even though I am.

  It is a quirk of the Vista operating system or is it normal if you use a router? Should I worry or not?

  Thank you all in advance and my apologies for the newbie question.

  Each router must be configured and the right data ISP (internet service provider) must be inserted.

  -Don't configure you the router?
  -How about the TCP/IP settings? All the settings are set to automatic?
  -How about firewalls? Have you used one or you turn it?
  -Have you tested different browsers?

  Please check the points above.

• Satellite A100-192: FN keys do not work after the update to Vista Ultimate

  I am a user of Satelite A100-192. Yesterday I installed Windows Vista Ultimate on my laptop. After installation, I realized 'Fn' and media player function keys buttons on my laptop keyboard do not work. What can be the problem?

  Hello

  Who knows? It s not easy to say what's wrong.
  Satellite A100-192 belongs to the PSAA9E series.

  All the drivers, tools and utilities need to be downloaded from the series on the right. Choose this model number!

  On the page of Tosh, you will also find the Installation Instructions. The drivers must be installed in that order. This is important.
  and don t forget to install the package of value added

• Satellite 4030cdt has a white screen but external monitor works properly

  Hello
  I have the following problem.
  My boss give me a Satellite 4030cdt laptop because the screen was white and because he was old.
  The rest of the laptop works very well so I want to make 100%
  But sometimes I see a bit of an image at boot and sometimes a bit of Win xp.
  Half of the screen and then "working" and after a while the screen turns white.

  I have a link that says get the answer, but you have to pay for it and I don't want to pay for something, if I'm not sure 100% if I get the right answer.
  or they say he cannot be resolved.
  I hope you understand what I am trying to explane.
  This is the link. http://www.experts-exchange.com/hardware/Laptops_Notebooks/Q_21759183.html

  Greetings hans visser

  Hello

  According to your description there is certainly some malfunction of the display. If everything works with external display, this means that you might not suspect graphics card. The display must be replaced.

• Satellite A100 - keyboard and Touchpad are not working

  Hello

  Toshiba Satellite Pro A100 to my daughter has developed a few flaws.

  First of all, the keyboard displays random characters like a stuck key. for example, if Google or Wordpad will be randomly type a single character over and over again even when no key is pressed. Sometimes it will also open windows or programs as sank the "enter" key, or scroll through the icons on the desktop.

  Second, the touchpad is inadmissible and cursor operation is not possible since the touchpad or buttons. I don't know if the two are related.

  She assures me that she has not spilled anything on the laptop, so any help would be appreciated to correct these mistakes.

  Thank you
  Brian

  Hello

  Can you notice the same problem with external input devices?

  Otherwise it s time for a service provider allowed. I think the keyboard and the touchpad should be replaced and the technicians can help you.

  On the Toshiba site, you can find a list of authorized service provider.

  Good luck! :)

• The Satellite A200 display driver update do not work

  I tried to uppdate the displaydriver of my Satellite A200 (PSAE0). I downloaded from toshibas website. 7.14.10.1461 driver version. (vista 32 bit).
  But when I try to install the exe, I received a message that the computer do not have the minimi requirements to run the program.
  What could be the problem?

  I tried to update the driver removes I can't get any picture in WinTV, only sound. Used with the Hauppauge Nova-TD USB tv card.

  If you have installed some drivers Nova-TD or software I think you have screwed something.
  Achieve the clean OS install and you will see that you will need to install the driver to display without any problems.

  In my opinion it is certainly not a driver problem. The same driver, you can find in the recovery image and all proposed pilots are tested. So the problem must be something else.
  A few weeks ago I ve made some experiments on Satellite L500 nine friends. I tried to install the tuner TV USB Toshiba and Savvy TV software. Later, when I tried to run the software, I got message that laptop has not enough RAM or something like that.

  Something wrong with all this. Using other applications, everything works perfectly.

  So I think that there is something wrong with your software and additional hardware.