Can anyone confirm if host vista can go to sleep when vmware workstation is running?

Similar Questions

• Windows 7 64 bit host works very slowly after discontinuation of VMWare Workstation

  I am running 64 bit Windows 7 on a Dell laptop with an i7, 6 GB ram and VMWare Workstation 9 processor. Everything works well on the host and the VM, while the virtual machine is powered on but after the suspension of the virtual machine and station work out of the system host becomes very slow and applications become desensitized. This lasts for several minutes after the stoppage of work. In general, I have executed only a VM at a time, but even when I got a couple of them run both the host system and they are very sensitive. I started the task with great difficulty Manager when this occurs to see if I can see problems with the free time of processors and memory use, and everything seems fine. So far all my research turned discussions about this kind of problem during execution of the virtual machine so I am at a loss to know even where to go next to make this diagnosis.

  Kind regards

  Bruce Brandt

  This is because windows is the collection of memory the vmware used in the system and marking of these blocks of memory piece by piece as 'free '. If you shutted down of the virtual machine (not paused) then the memory can be returned to the system immediately. I guess if it was caused by the Intel RST driver because I noticed about there is also no question AMD computer used by my colleague.

  You can wait until the stops of HDD-light, keeping the stats of light, constant in the meantime try avoid to activate any application of consumption-e/s disk / operations.

• WLan can be activated only when the NB200 is running

  I have a laptop Equium n and a netbook NB200.
  I implemented the new netbook NB200 a couple of days and had the same problems experienced by others trying to turn on the Wifi!

  Now it's OK, but I find that the laptop can't access Wifi now if the Netbook is running (the laptop was fine before that appears the laptop!). Obviously, to put in place access Netbook, I did something stupid, but I can't imagine what it is!

  I hope that someone can suggest a solution.

  Thank you

  Hello

  Sorry mate, but I'm a bit confused of m.
  For me it s case; If the laptop is turned OFF the Wlan cannot be used.
  Only if the laptop is turned on you can activate the WLan using FN + F8 key combination and use the WLan.

• Get 'error, cannot start. Setup can not continue"message when you try to run autorun.exe Fifa 2011

  Original title: error

  In fifa 11 when I run autorun.exe and put the serial key it says: error: could not launch. Setup cannot continue.     What should I do?

  Please help me!

  Hello

  Check if the game is compatible with Windows Vista Compatibility Web site.

  In the meantime, I would suggest you follow these steps and check to see if they help.

  Step 1:

  a. right click on the file and run as administrator.

  Step 2:

  Run the game in Windows compatibility mode and check if that helps.

• Computer virtual configured NAT on a host of authentication 802. 1 x (VMWare Workstation)

  This setting works, if the host is not authenticated and the 802 network port. 1 x open mode. It also works, if the virtual machine is in bridge and the virtual machine is authenticated with the 802. 1 x parameter or in the LAM. But as soon as the host is authenticated with 802. 1 x and the VM is configured in NAT, if I restart the VM, it no longer works.

  I know that it is better to have all the VMS to authenticate to the network, but I want to know why it doesn't work?

  Sorry I found the answer! NAT and DHCP options was remove with the deployment package.

• Can't build the kernel Linux in VMware Workstation 7.0 modules

  Hi, I have VMware Workstation 7.0 installed on a Fedora 20 x86_64 system, and I can't get past the 'install' kernel modules I looked around, but and I tried some things but none have worked. Is there anyone here who knows how to create and load the modules in the kernel for my system. The kernel is 3.13.8 - 200.fc20.x86_64 - x86_64.

  Thank you

  Fedora is not a host operating system support however is not officially supported and may / will this market are separate things.

  I have VMware Workstation 10 running under Fedora 20 on the stock kernel however the core of 3.13.x is not yet supported on supported OS host and modules need to be patched.

  VMware Workstation 7 is probably to old for work, unless you can find patches of third parties to the versions of core and WS.

• The host VMware workstation and multi-core CPU

  Apologies if this has already been answered, but all my research to turn questions about processors how can specify in a virtual machine. It's not what I'm after here.

  I want to know is the use of VMware workstation (v6 and v7) is available on a multi-core worksation host physical cores.

  I have a scenario where we have several virtual machines containing sensitive coding environments. The material that they are on is a little old and we don't have the time or the knowledge to recreate systems (a combination of Matlab, DSpace and some custom coding). Our only option (and we did it for a couple with success so far) is to create virtual machines of these workstations.

  Which is absolutely essential for us is the material we choose VMs on host. Virtual machines will use simple/double/processors virtual.

  In order to choose the correct hardware platform, I need to know if VMware workstation is running an instance of the virtual computer within a single processor (in this case is the reduced performace?), or if there are multithreaded and make the most of the hardware it will run on.

  (We are not welcome, never more 2 virtual machines at the same time)

  Any suggestions on material would be appreciated also. I think of something based around a core of Xeon 4-6 with 12-16 GB of RAM.

  Thank you very much

  Nick

  Correct, for laboratory/debugging and interaction VM Workstation is pretty good.

• Can anyone confirm that a square-end 85w can be used in a 13 "MacBookPro 2012? I hate 60w L-shaped connector.

  Can anyone confirm that square-end 85w, for example as expected with MacBook Air, a connector can be used for a MacBookPro 13 "beginning 2012? I hate the 60w L-shape connector which was published with this laptop. Power cable from my previous small white MacBook had the square-end connector and it worked GREAT. The L one shape is difficult to reach, and it does NOT have quick disconnects if someone tripping over the power cord. Thank you.

  The version of Magsafe backward compatibility rather than another, is documented;

  However for the moment, I have not access to an old bookmark on this aspect.

  A problem with some MacBook Air power adapters is that they lack power for use

  with the other big power demanding models. Start/MacBookAir used power 45W.

  Examples of magsafe power adapters:

  http://eShop.MacSales.com/search/MagSafe+adapter

  Other info MagSafe:

  • Laptops Apple: Troubleshooting MagSafe adapters - Apple Support

  • Find the right adapter cord for your laptop Mac - Apple Support and sector

  I used a newer MagSafe2 with old computer equipped with MagSafe original ports.

  Don't know why, but any form adapter is needed to make it work. It's a square-edged 85w.

  Good luck in this case!

• NET Accounts, locking threshold does not change. Can anyone confirm if the Net Accounts command has been depreciated?

  I have recently updated our default domain password policy.  After that I updated the threshold of locking to 7 I ran the following command in PowerShell:

  Get-ADDefaultDomainPasswordPolicy

  This shows that the policy has been updated to reflect the change I made.  However, when I run the following:

  NET Accounts

  The threshold of locking does not show change.

  Can anyone confirm if the Net Accounts command has been depreciated?

  Thank you

  Emmanuella

  CrystalBall © SEZ...

  It is a forum for specific consumers. You will find appropriate support for Windows 7 in these forums of Pro-specifique to IT: https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

• Can anyone confirm that Edge animate is now discontinued?

  We use this in our classes. One of my colleagues today confirmed that EA development is officially abandoned, and Adobe will now focus on the export of html5 in Flash.

  Can anyone confirm this?

  Well, that's it then, I guess.

  Update on the tools and Services

  Welcome to Adobe animate CC, a new era for Flash Professional

  As expected and now officially confirmed.

  The end of the line to animate dashboard. Goodbye Edge Animate - it was good knowing you, and we are sad to see you go.

  Flash is NOT the solution for me, however. I already work with alternative tools.

• Can anyone confirm that groups of Nik Collection plug-in filters are compatible with 13 PS elements? Thank you

  I am considering the purchase of 13 PS both the Nik Collection of Google - plug-in filters for use with PS Elements. The Collection of Nik is a package of 6-7 groups of plug-in filters. Someone told me that NOT ALL the Nik plug-ins filters are compatible with PS 13 items. I thought I would ask the source. Can anyone confirm that groups of Nik Collection plug-in filters are compatible with 13 PS elements? Thank you

  Hi jimc,

  HDR Efex Pro 2 is the only group of plugin is not compatible with Photoshop Element 9 to 13, still other groups plugin works fine with Photoshop elements 13.

  See link: Google Nik Collection

  It will be useful.

  Kind regards

  ~ Mohit

• Can anyone confirm that LrDialogs.promptForActionWithDoNotShow is buggy

  Hello

  can anyone confirm that the first code fails and the second is not?

  Rgds - LZA

  LrTasks.startAsyncTask(
       function()     local result = LrDialogs.promptForActionWithDoNotShow(
            {
                 message = "Warning",
                 info = "Info",
                 actionPrefKey = 'lzaIgnoreVersionWarnings',
                 verbBtns = { { label = "OK", value = "OK" } },
            }
       )
  
       end
  )
  
   
  

  LrTasks.startAsyncTask(
       function()     local result = LrDialogs.promptForActionWithDoNotShow(
            {
                 message = "Warning",
                 info = "Info",
                 actionPrefKey = 'lzaIgnoreVersionWarnings',
                 verbBtns = { { label = "OK", value = "OK" } },
            }
       )
  
       end
  )
  
  
  

  Is it a trick? (the code is the same in the two blocks)-one thing:

  the verbBtns must be:

  label & verb NOT label & value

  PS - Beware of some inconsistent naming of members ui-text/response-code button in the api...

  _R

• NLB - two virtual machines can't ping eachother when on separate hosts

  Greetings,

  I've been running some tests with NLB on the different desks as recommended here:

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1006558 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 42912404 & StateID = 0% 200% 2041454115

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1006778 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 42912404 & StateID = 0% 200% 2041454115

  I found that Unicast works better in our network environment, but it is still a problem:

  In http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1006580 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 42912690 & StateID = 0% 200% 2041454807

  He says: "since all hosts in the cluster have the same IP Address and the same MAC address, there is no communication possible inter-hote between the hosts configured in unicast mode.» A second NETWORK adapter is required for any other host communication. »

  However, even with a second NETWORK adapter the virtual machines cannot ping eachother when they are on a different esx host. When they are on the same host esx virtual machines can ping each other. Also, when they are on different hosts, so that a virtual machine cannot reach each other on their dedicated IP address, virtual machines can reach other when ping the second card NETWORK (the one without an informed gateway).

  For example, the next 2 guests are connected unicast:

  VM1 has 2 network cards, NIC1 = 172.18.18.41 with gateway (dedicated IP) and NIC2 = 172.18.18.43 without gateway / WLBS enabled.

  VM2 has 2 network cards, NIC1 = 172.18.18.42 with gateway (dedicated IP) and NIC2 = 172.18.18.44 without gateway / WLBS enabled.

  When on the same ESX host VM1 can reach VM2 on 172.18.18.42 and 172.18.18.44, and vice versa.

  When on ESX different hosts VM1 cannot reach VM2 on 172.18.18.42 but it can reach VM2 thanks 172.18.18.44. In this case VM2 cannot reach VM1 on 172.18.18.41 but can reach VM1 on 172.18.18.43.

  I followed and applied the settings recommended in this article: http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1556 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 42912404 & StateID = 0% 200% 2041454115

  I even tried the kb from microsoft as shown here: http://support.Microsoft.com/kb/898867 even if the virtual machines have 2 network cards, but of course that did not help either.

  Does anyone have an idea what is happening here?

  The fact that it works on the same host, but not on different hosts type advanced to a network within VMware issue.

  Thanks in advance,

  Bram

  It seems that ir can be a problem of IP routing, even with the hosts on the same subnet.  Make sure that your routing table that traffic on each that is to/from your mgmt that ips turns off your local management interface.  If it isn't, then update your routing table in order to.

  Or, you could try setting up your mgmt network cards on a different subnet from your IP NLB.  I suspect that this will solve the problem.

  JP

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I run VMWare Workstation on a virtual host?

  I need to run VMWare workstation 7.1 on a 2008 R2 virtual running on ESXi.  The software installs fine, but when I try to start the virtual machines I get the following error 'you are running VMWare Workstation via an incompatible hypervisor. You can not power on a Windows virtual machine until this hypervisor is disabled. »

  Is it still possible?

  Due to a design flaw of material in the first AMD - V compatible processors, we do not support AMD - V on your host.  Hardware support for virtualization (AMD - V or VT - x) for the virtual machine outside is needed to get nested VMs to work.