can application not available I restore the data from an encrypted backup?

Similar Questions

• I'm not allowed to transfer the data from the laptop on an external hard drive.

  Original title: operating system Windows 7, problems with Permissions

  I use the Windows 7 operating system. Recently my system I cannot transfer all the data from my laptop to any external hard drive. The Popup says that you don't have any administrative permissions... I am a single user and a newspaper with my Admin password but some how it continues to be. Help, please.

  You may need to take possession of the records on your external drive - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/
  Alternatively, you can reformat the external hard drive.

• XP sp 3 order restore system restore. Reports, not able to restore the (date) _

  recently installed program of care 3 Advanced System. clean registry, short cutting etc. with apparent problem. correlation? suggestions? I already "canceled" pre cleaned State .even no joy will not restore?  reload XP OS and start @ square one?

  System Restore didn't work before installation produce of the care system?

  Did you install a free or paid version of ASC?

  I suppose it does not really matter, but what problem have you requiring you to use the system restore or if you are just practical (it should still work).

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  Depending on what you use for malware protection, you will maybe disable the product temporarily, make the system restore and then turn on the product.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• New iPad: restore the data from the old iPad, but...

  I got a new iPad. I have already backed up my old iPad to iTunes and wanted to put in place the new iPad to restore this backup data. BUT when I connected to iTunes, I've learned that I have to update the operating system first. He wouldn't let me NOT restore from backup! I had to set up as a new iPad.

  So, I did the installation of the new operating system. But I have a lot of applications and data from the old iPad I want on the new iPad. How can I quickly transfer these data? I have found no method to restore the backup of the old iPad now since. Frustrated!

  Follow the directions here: https://support.apple.com/en-us/HT203434

  Basically, now that iOS is updated you need to clear the iPad and then you can restore from a backup. -AJ

• does "set up as new iphone" prevent later restore the data from the old iphone (iphone 4)

  refurb Iphone 4: if I use the option "set up as new iphone", I can retrieve later data from the old iphone from itunes? (macbook 10.6.8 don't dl latest version of itunes @ this time)

  You would be able to restore an old backup him later, but doing so will wipe everything that is currently on the phone. There is no way to combine.

• I have CS2; It was installed on my old MacBook Pro 17 "and fortunately he used for years.  The aircraft crashed and I got a new hard drive and system board; restore the data from the back upward.  Now I'm trying to reinstall from CD/DVD, but when I get to

  Can I somehow remove the old program files in the back-up?

  Hello

  You can check this link to download and activate the cs2.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Concerning

  Gilles marneffe

• Restore the folder from Time Machine backup external hard drive

  Hello world

  I have a folder of music that is 600Go and has been saved on Time Machine my previous internal hard drive in the iMac.

  Ive since upgraded to SSD and do not want to want to restore this music folder on my new SSD due to its massive size.

  Is there anyway I can restore the folder music of time machine on an external hard drive?

  This way I can still recover my music collection but away from the internal SSD.

  Any info and advice would be great.

  Open Time Machine

  Navigate the backups to find the music folder

  Click on the music folder to highlight

  Click on the gear at the top of the window icon

  Click on "restore to".

  In the next window that appears, locate the hard drive

  Click on the hard drive to highlight

  Click on choose

• Could not restore the data on the iPad

  Welcome!

  I restarted my data and the news of the iPad in Factory mode and after that I wanted to restore the data from backup to iCloud.

  My problem is very simple.

  After the nice tutorial and connection with apple ID, I have to choose 'restore data for icloud.

  That's what I do every time.

  Next step is to choose which backup I want to restore, I chose iPad Mini 20 June 2016.

  iPad show me to connect to another identifier apple to download applications and...

  He begin to calculate how long it will restore the data.

  It is the calculation for a long time and I can see the end of it. AFTER THAT I decided to stop the calculation, I chose again restore the same backup data.

  After that... it shows me that he cannot restore data from this archive.

  I did it many times, restart, save trying to itunes and nothing does.

  Dr. Fone wondershare cost a lot, and I can't buy it right now. How to restore the data, what can I do?

  FACT.

  I did it.

  I thank all of you who is interested in the topic.

  I like to say how I solved it if someone goes here in the future

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  You can not. Try to return the unit and get your money back. There is absolutely no way for you to unlock the device,

• Restore the data to backup the Windows XP system files

  I have a backup of the Windows XP system to an external drive.  I need to restore my data from this external hard drive files only.  I don't have an XP machine.  Ideally, I would like to restore my data files on a Windows 7 computer and save them to the external drive. Is this possible?  If so, simple step by step instructions can be provided.  Thank you.

  Hi Denise_898,

  1. How were you running the backup of files on Windows XP?

  2. what program did you use to backup files in Windows XP?

  If you use the ntbackup utility available in Windows XP, you use NT Backup Restore Utility for Windows 7.

  Restore description of the backup of Windows NT to Windows 7 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/974674

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/308422

• FDMEE of planning data loaded successfully but not able to see the data in Planning - export of fish shows in FDMEE

  Hi all

  We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.

  In the processes log, I can see her mentioned data loaded in the Cube. Please advise on this.

  Thank you

  Roshi

  Two things:

  -I wasn't talking about method you import data but export data. You use the SQL method. Go to target Applications, select your application of planning/essbase, and set load method as a file. Memorize your settings

  2014-06-19 12:26:50, 692 [AIF] INFO: rules properly locked the file AIF0028

  2014-06-19 12:26:50, 692 INFO [AIF]: load data into the cube by launching the rules file...

  2014-06-19 12:26:50, 692 INFO [AIF]: loading data into the cube using sql...

  2014-06-19 12:26:50, 801 [AIF] INFO: the data has been loaded by the rules file.

  2014-06-19 12:26:50, 801 [AIF] INFO: Unlocking AIF0028 rules file

  2014-06-19 12:26:50, 801 [AIF] INFO: successfully unlocked rules AIF0028 file

  -Then export again and review. DAT file in the Outbox folder. Is it empty?

  -You need to add a new dimension to your import format (Dimension add > currency). Then add Local as expression

  -Import, validate and export data

• Restore the data file

  Hello
  
  Initial situation and config:
  
  Server: Win2k3 Sp1 32 bit
  Database: 10.2.0.4 Standard noarchivelog mode
  RMAN catalog on different server.
  Cold backup
  
  
  Therefore, I was invited to do a restore from a backup of database. What he needs, it's to restore the controlfile, spfile and a data from a backup file complete performed via RMAN. He does NOT INTEND to use them, they just want to see their restored from the backup.
  
  Restore the spfile and the controlfile is not a problem, and I was able to restore them to a Test directory. But since I can't restore datafile 1 to 'C:\dest', I googled how to make these.
  
  I came up with these, which I think who should restore a data file to a different location, but I don't know if it's okay. And since I started on the database server, I prefer to ask first.
  
  The value of newname to 'C:\datafiles\datafile1.dbf' to 'C:\Test\datafile1.dbf ';
  restore the data file 'C:\Test\datafile1.dbf '.
  
  Would this work? It must be run with the open database altering State and work and will not somehow it. If not, can someone help me here? The only thing needed, he did restore a data file just to get...
  
  Thanks for the tips!

  Add this

  RMAN > run {}
  value of newname for datafile 'C:\datafiles\datafile1.dbf' to 'C:\Test\datafile1.dbf ';
  restore the data file ' C:\Test\datafile1.dbf';l
  switch datafile;
  }

  It will update the control file with the new location of this data file

• Application not available through internal work space

  Hello
  
  Is it possible to make an application not available through space internal and connected work as an admin user? If so can you point us in the right direction? We have been watching all about to do, but couldn't find anywhere to do it.
  
  BTW - we made the request not available but we connected to the workspace where the app is as a developer and set the status as unavailable, I was wondering if we could do it as the admin user.
  
  We currently use Apex 3.2.
  
  See you soon,.
  Paul.

  I think you have misinterpreted? or maybe I?

  You want the option change the "availability" of an application, not change from run to run and build.

  You can't do it from the internal workspace from what I can tell, but can do so from within your current workspace if you have administrator privileges.

  See Managing the status of building in the Administration of the workspace in the doco: http://download.oracle.com/docs/cd/E17556_01/doc/admin.40/e15521/aadm_build_status.htm#BABFDJHI

  In addition, I don't know if you're aware, but you can also change the State of availability through SQL Developer.

  Van
  Trent

  Published by: trent on March 12, 2011 08:18

  In fact, that the documentation is for 4.x... not sure on 3.x, nothing in the doco. Maybe try the technique of the SQL Developer?

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.