CAN communicate with Veristand

Similar Questions

• My HP Officejet 6500 E710a-f can communicate with the router or wireless access point

  I don't even know if my printer supports wireless or not there only ethernet logo on it and no wireless setting in its control panel as shown in the manual, I plugged on the router via a cable many years ago but now, for some reason, I need get the router of the printer if it can communicate with the Wireless router and if she can , how it will be, and to ensure in this... I have no parameters to talk wireless in the printer, but as I remember in his specification he supported wireless do not know if I got the wrong specifications or my printer is missing something.

  and it is my printer status

  Hello

  Unfortunately, it is not a wireless printer:

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/my-OfficeJet-6500-E710a-f-wont-print-wirelessly-Windows-7/TD-p/1820813

  Kind regards.

• Anyone know how I can communicate with adobe pro support by phone first?

  Anyone know how I can communicate with adobe pro support by phone first?

  Start here: Customer Contact for Premiere Pro Service. This will help you go down through your particular situation.

• How to create two separate networks in ESX that can communicate with each other with 2 x bear?

  Hello
  Just want to know a fundamental question concerning the configuration of my ESX host of singlebox with several vswitch and two teddy bears,
  What is the definition or use of the network Label and ID of Port? Yes VLAN, I know what it's meant for the physical world.
  My goal here is to
  1. create several vSwitch with much 4 VM on the two vswitch and it communicate somehow vswitch0 and vswitch1 happen? I need to plug the switch of pNIC2 for communication can / must travel through the network cable in my ESX?
  2. how to force all traffic Vmthe in a vswitch to enter a virtual machine that runs as a router VM and then talk to the other router vswitch VM? is this possible?
  Thank you.

  I do not know if I understand perfectly, but I often have to create isolated networks.

  In this case, there is only one NETWORK card, but it works with two, one on each switch. vSwitch0 can communicate with the outside world via the vmnic0. vSwitch0 and vSwitch1 are connected by the virtual router of pfsense. The virtual machines on the portgroup private connect to the world outside and any other VM on the portgroup VM network via the pfsense router. To access computers virtual private Portgroup requires a VPN connection via the pfsense router. This is a completely isolated network. With an additional uplink on vSwitch1, you can connect to other physical devices.

• How the physical machine can communicate with the virtual machines as well as the internet should work on a virtual machine

  Hi team,

  I ask that you forgive for asking a silly question without doing a free search.

  I'm using VMware workstation 6.5. I am able to communicate with both machines by selecting 'only option of home. "

  Is there a way by which the physical machine can communicate with the virtual machines.

  At the same time through the VMS, is it possible to access the Internet from the physical amchine.

  Help, please.

  Concerning

  Sriapti

  When you use a bridged vNIC the customer acts as any other host, so that you can access is by his IP (or name if a DNS configuration exists as you acceding to any other host.) What tools you can use depends on the guest operating system and the software available.

  I assume you mean access deskopt. Then you can use RDP (Windows Terminal services) or VNC (tight/tiny).

  For Linux, you can use this last or all the flavors of SSH. In the case of Linux, I use VNC through SSH tunnel. You can also tunnel X through SSH, so if you have an X server on another host (such as the Hummingbird for Windows), you can open your own office remotely there.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

  Hello

  I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

  I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

  After about 40 min (depends on the amount of data in) I get this error:

  (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

  What are the causes of this error?

  Thanks in advance,

  Aviad

  Hello aviadCielo,

  When you get this error, what does do to make it work again? If you restart your program, start all this work?

  Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

  Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

• 2 separated on same ASA VPN tunnels can communicate with each other

  Here's the scenario that I have a VPN tunnel with one of my remote locations.   I also have a VPN Tunnel with a provider that supports the equipment for my organization.   I need to have my supplier able to communicate with equipment that live in my other VPN tunnel.   The two Tunnels are on the same ASA5540.

  1 is it Possible?

  2 How set it up?

  Thank you

  Follow this link for example. Enhanced spoke-to-spoke VPN, allows the two tunnels ending to your asa5540 to connect, using parameter permit intra-interface with configuration accless-list permits traffic of each endpoint of the tunnel.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00804675ac.shtml

• Can I communicate with VeriStand without VeriStand engine running?

  I know not how to use the .net api to control the VeriStand with VS motor running.

  The exec of model runs on the target, I want to display the value in my own C++ application, can I get the target data without keeping veristand running?

  The answer could be Yes and no. VeriStand gateway must be run as a process to manage the communication with the target. Yet, VeriStand window can be hidden somehow by launching the bridge program. This is a feature not supported from now, but you can read this thread !

  Kind regards

• Issue of school laboratory: setting IPs & VMnet1 so two computers can communicate with each other and to access the internet

  Hello ~

  This question has probably asked a million times in a way or another, but here's my specific: I'm a laboratory for school. I've set up two virtual servers (Windows Server 2012) in VMware Pro 12. The goal is to speak (see others). According to the instructions of the teacher, I set them up as follows:
  
  "Assign your appropriate servers of IP addresses based on your installation environment.  For example, if your network environment uses the class C address range 192.168.1.x, assign a server IP 192.168.1.10, 255.255.255.0 subnet mask, a default gateway 192.168.1.1 and the other server IP 192.168.1.11, 255.255.255.0 subnet mask, a default gateway 192.168.1.1.  Note: If these IP addresses will conflict with your internal network (provide your virtual machines with access to the internet), please choose a different set of address that will work for you. »

  
  

  I need to know what will work addresses. got a domain controller DC1.  Now, I can't see each other. I can't connect to Internet via IE which is one of the 'evidence' that I'm supposed to provide.

  
  

  When I go to the Publisher, I see as the guest only parameter (how is it said to set up when you first install the VMs) is 198.162.150.0. I did not who, but I'm a little but I don't want to make things worse by changing things. I guess that's where the problem is, but I'm not sure what to put the IP, default subset mask and DNS for so I'm stuck.
  
  If it means anything, it is in fact on a borrowed laptop which is connected to the WiFi and wireless. The laptop has internet but I don't know how exactly bringing on the virtual machine when it come to be able to connect. I don't need to become an admin system; This is a compulsory course and I'm just trying to understand enough about it to pass. The problem is that other labs are constructed on it so I can't just ignore it.
  
  Any advice you can offer would be GREATLY appreciated. By the way, happy new year to you all.
  

  Sorry, yes it was a typo. It's supposed to be 192.168.150.xxx.

  Although the virtual machine must be able to communicate if they are both configured similarly (i.e. host only in this case), you generally EF IP addresses in the subnet host only for those virtual machines to be able to access it from the host, which - as mentioned earlier - should have an address of VMnet1 IP of 192.168.150.1.

  André

• Everyone actually works in FireFox, or is it just people here in the forum? It is absoultely no way I can communicate with someone at FireFox... It is totally useless to try more. I have been trying now for 2 weeks

  For openers, I can't connect. My username will not work and the only way I can get in at all is to open a new email account with another e-mail server

  What a mixed suit

  You asked, the questions I had were

  Supports FireFox 9... HP Support Assistant

  FireFox supports... Band in a box of 2012

  Neither does not work after installing FireFox 9

  Firefox does not interfere with your "HP Support Assistant" program (I installed it on my HP laptop) so if it doesn't work anymore, you have to contact HP support or see this page if you want to reinstall: http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html

  I don't know anything about "band in a box of 2012" or if it includes a Firefox Add-on. See reactivate the modules that have been disabled when updating to Firefox in case that's the problem. I found the support page for the software "Band in a box of 2012" here: http://www.pgmusic.com/support.htm

  For connection problems, start a new topic in the forum Discussions Community SUMO, https://support.mozilla.org/en-US/forums/contributors
  ... and add "Attn: Admin" in the title so that it is the attention of a support administrator, for example: "[Attn: Admin] problems of user name and logon.

• 2 - IOS mobile devices can communicate with each other

  I have two Mobile IOS devices, the iPad (3rd generation) and I inherited an IPhone 4S.  I also have a MacBook 2.0 that I use to synchronize the iPad and manage my music in iTunes.   Before inheriting the iPhone, I created a number of events on the calendar on the iPad application.  Can anyone recommend the best way to duplicate the events calendar on the iPad and place them in the iPhone, not manually create events in the iPhone?

  Any help would be greatly appreciated

  Thanks in advance,

  Darrell

  Which versions of iOS are running? If it's iOS, 7, 8 or 9, then you must use iCloud things to sync like calendars, notes, reminders, etc.. See iCloud: overview of the calendar and activate iCloud on your iOS devices.

  Your MacBook sounds very old (what year model is? I can't find any model of MacBook 2.0 2.1 only) probably too old to support OS X with support from iCloud, so it won't work with it.

• WLC can communicate with light AP through Layer 3?

  We have totally autonomous access 20 points in several remote sites. Probably expand us the current wireless network in the future. Say 50 will be enough. We intend to change these autonomous AP to the lighter. Download the WLC to control. My question is: can WLC lwap through lwapp layer 3 to communicate? If so, we only need a WLC sitting at HQ data center.

  Thank you.

  Lou

  Yes, LWAPP (or CAPWAP if you use newer versions of the WLC code) can use Layer 3 for communication between the WLC and APs.

  http://www.Cisco.com/en/us/partner/docs/wireless/controller/6.0/Configuration/Guide/c60ovrv.html#wp1069102

• Dell Wireless 1395 WLAN can communicate with the Netgear router

  Everything works very well with my old HP laptop.
  Now, I also have a Dell Inspiron 1520 with a Dell wireless 1395 WLAN mini map. I can't links with my Netgear router using the new Dell. However, I can link to the top of my next "s"Linksys"router, but by very weak signal because of distance. How can I set up for my Dell to connect with my Netgear router?  I went through all the routines of wireless network of Microsoft AND Dell Wireless network routines.

  
  

• What should I do when I can communicate with my instrument NI MAX through other programs, but not of LabVIEW?

  Hi all, this is a question that I had a few times before in one form or another.

  I use a Boxcar Integrator (245 SRS is the interface) for my experience. I connect to it via GPIB using my Agilent GPIB/USB interface. My program runs in LabVIEW, and I used it successfully in the (very recent) past.

  However, sometimes if I get LabVIEW or something, some weird stuff starts past trying to connect to it. For example, after the LV exit and go back to the top and any attempt to run my program, it throws the error:

  Error 1073807339 has occurred in the CITATION read in OR_Boxcar_ReadAnalogPort3.vi-> OR_Boxcar_SimpleTest.vi
  
  Possible reasons:
  VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  Which essentially means that he cannot connect for some reason or another (don't worry, I'm on the right GPIB address).

  So I go to equivalent NI MAX or Agilent (Keysight connection Expert), proceed to part communication from VISA to either and manually, connect with the machine. And it works! If clear my computer is communicating with the machine at this point, but not of LabVIEW.

  This could be the cause, and what I might try? Thank you!

  Oh shit, I forgot about it! I solved the problem, it was actually a 'me' problem is not a problem of LV. Even my solution would not be to help someone else who finds it. I was trying to read from my instrument, but it is in synchronous mode, so it generates an error if you try to read her when a data point has not been loaded in its buffer. I did something unusual, so it was not a point of data loaded into its buffer.

• Max and LabView can communicate with the device series

  I'm trying to connect a balance Mettler - Toledo JL - 6001 to my computer as an entry for a LabView program through a RS-232 to USB line.

  In MAX, I get sometimes (but not always) the error message "the resource works correctly, but VISA cannot currently access."

  On the general tab for this port, I get the message' VISA returned this camera when searching for resources, and MAX was able to use VISA to analyze the resource name.  The resource was busy, so MAX could not successfully log on VISA to the device. »

  In LabView, the program runs, but I get all zeros as output which is definitely not correct.

  I tried deactivation and activation then the port. I tried making sure that no other program is using the device, and then restarting the computer.

  I'm not sure I have the correct driver installed for this scale (MTT coach), (they do a lot of balances and some pilots and was not sure than to use). I don't know if that makes a difference in MAX.

  A few tips for how to get balance and the MAX to communicate? Also, I know almost nothing about the transfer of digital data / series a response very dumbed down would be greatly appreciated.

  Thanks in advance,

  Joanna R Murphy

  Hello Joanna,

  Please take a look at this white paper. There are several solutions for this error.

  Best,

  Carmen C.