Can directory of wishes, you record your own?

Similar Questions

• When you build your own PC for an operating system you buy Windows 7 or Windows 7 OEM?

  I need to know this! XD

  Conditions of licence for the 'Windows 7' system builder OEM version requires that you sell your computer. This asside, all OEM versions are related to the 1st motherboard you install on and can not be moved to another computer or motherboard.

  You're better off in the long term to buy the full version "Retail".

  I also suggest that after you have built your computer which test you with a non activated Windows (installation keyless) version.

  ===================================

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
   
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Install Windows 7 (no key needed) for 30 days

  'No need to activate you get a grace period of 30 days that is perfect for the tests'
  then use the following tools (which implies that the memtest shows no failure)

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (The steps are the same, except that you do not create a repair disk but complete an installation DVD)

  Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  = Once Windows installed =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Updates the app world VS. your own updates

  Hi all

  We are preparing to release our application.

  My question is, most of you use App World to distribute and update your applications or you roll your own?

  My other question is, all blackberry models come with App world installed? App world will settle on the software updates for the older models?

  We are trying to determine if we need to create our own update process or piggy back the worlds of the app.

  Thanks in advance

  App World pushing updates, but the timing of these updates is different and all users do not receive at the same time (I guess for reasons of scalability and efficiency).

  You use a credit for each update that you push so if you want to push your own updates via a mechanism of "Check for updates", you can, but it's perhaps easier to push in the App World and let the App World to warn the user.

• You can delete your own post

  If you can, please give me instructions. Please note my operating system and devices.

  No, you can't delete your own post that guests can. Give me a link to the post and the reason why you want deleted tt and I'll pass your request to the hosts.

• You can add your own default program

  original title - preset programs

  You can add your own program by default, to the list that I already have in my default program file, any help will be much appreciated cheers john

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you want to know if you can add your own program in the default programs list. I will try to help you with this question.

  Please answer this question to get more clarity on this issue:

  • Are what program you referring?

  A default program is the program used by Windows when you open a particular type of file, such as a music file, an image, or a Web page. For example, if you have more than one web browser installed on your computer, you can choose one of them to be the default browser.

  If this program is compatible with Windows 7 and this program is installed on your pc and then under set your default programs, you can choose which programs you want Windows to use, by default.

  Keep us in the loop to help you further.

• How can I save the page settings in the Notepad. I wish to record the size of A4 paper but just default to 'Letter' every time that I re - open Notepad.

  I can't save the page settings in the Notepad. I wish to record the size of A4 paper but just default to 'Letter' every time that I re - open Notepad.

  Hello

  Included with Windows Notepad text editor allows you to configure the layout including headers, footers and margins. These options are normally not saved between sessions, but with this Notepad tweak can be done to save the changes. Please try this method and answer us.

  Open your registry database and find or create the key below.

  A. go to start and regedit and press ENTER.

  B. HKEY_CURRENT_USER\Software\Microsoft\Notepad

  C. create a new DWORD value called "fSavePageSettings" and there the value '1' to save the settings page.
  D. create a new DWORD value called "fSaveWindowPositions" and it "1" to record the position of the window.
  E. restart Windows for the change to take effect.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows

• How can I configure Messenger to record my conversations, record them and send them to a location I can read and save when you use Messenger on other computers than mine?

  How can I configure Messenger to record my conversations, record them and send them to a location I can read and save when you use Messenger on other computers than mine?

  original title: Live Messenger

  Hi Nicoliani,

  To start saving your Conversations in Windows Live Messenger

  1. connect to your window Live Messenger and click on 'Tools' or click on your display name.

  2. scroll down to "Options", a window should appear. When he does very well and click on "Messages".

  3. locate "historical Message". After that, check the box that says, "automatically keep a history of my conversations.

  4. below that you will see "save my conversations in this folder."

  5. to side of her you will see change, make sure that it is a file that you can access and watch later.

  6. If you are on a network, you can save it in a directory which you have access, or you can save it to a location and later mailed to yourself and access it later.

  Where chats are saved is given below.

  1. to access the Conversations go to the start bar and click My Documents. Then click on "my received files."

  2. There should be a folder with your name on it. Click the folder, then you will be in another folder called history. Continue

  3. by clicking on the folder, now you should see all your saved conversations.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How (burning?) copies of your own movies on a DVD? I have only a single tray to insert the bland DVD. Is a required type of c1040 of DVD? Thank you

  How (burning?) copies of your own movies on a DVD? I have only a single tray to insert the bland DVD. Is a required type of c1040 of DVD? Thank you

  A drive and a blank DVD is all you need. Check
  the manual of your DVD burner and a DVD player to
  See the types of DVDs, they are compatible with.

  Personallty I have had success using DVD - R blanks.
  The following article offers some info about brands:

  What are the best blank DVDs?
  http://www.digitalfaq.com/reviews/DVD-media.htm If this is 'not' a commercial - protected against copying DVD...
  the following freeware can create an ISO Image
  that allows to burn copies.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.5.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

• In the hearing of the CP, how can you record a Skype call?

  I don't see a way to get Skype as input source.

  You probably can't.   Audition records just any signal that is called by the audio device to your computer, be it the sound chip on board basis or a professional audio interface.  It is on the controls to you audio device that you have selected your source.

  Unfortunately, most of the manufacturers have removed options like "What U Hear" or "Line Out" of their selection menus. "  It was under pressure from the recording industry who thought that this ability was used to pirate music.

  There are ways around it for Skype.   There is a piece of software called 'Virtual Audio Cable"which would let you do - unfortunately not free and quite tedious to put in place.  Virtual Audio cable home page

  Or, if you can deal with recording in a separate bit of software and editing at the hearing, there are a number of specialist Skype recorders.  I used one called "ifree Skype Recorder" recording Skype calls with iFree Skype Recorder - your FREE Skype software call recorder with great success.

  Finally, if you have mixer etc. Sometimes, I have rigged a system to use my smartphone to call Skype, create UNMIS RSS mix in mixer and record at the hearing.  I must admit that it was more to see if I could because I had to!

• can you put your mail icon in the dock on your top menu bar?

  can you put your mail icon in the dock on your top menu bar?

  N °

• How can you transfer your bookmarks to a new PC?

  It's a simple question!
  How can you transfer your bookmarks to a new PC?

  Thank you
  Marie Pierre

  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• "This device is already associated with one identifier Apple" "If you can also download past purchases with your Apple ID, you don't auto download or download past purchases with another Apple ID for 90 days.

  I had damaged my phone and Rec'd a refurbished Iphone s 5, Assurian, for an insurance claim.  (all transferred, but the phone was defective and returned and replaced with another refurbished iPhone 5 s) Yet once implemented with the help of AT & T Tech support Pro, everything goes fine until I realized that, although transferred to my iTunes library, when I went to play a song, I got the following message...

  "This device is already bound with one identifier Apple."

  "If you can also download past purchases with your Apple ID, you don't auto download or download past purchases with another Apple ID for 90 days.

  I've had several I phone and I have never encountered this problem. It gives me the option to cancel or transfer, however, I'm afraid of something disorder which could cause me to lose my purchased music or cause other problems... everyone has ever encountered this problem? or know what to do about it? Thank you

  You will not lose your purchases related to your Apple ID

  It seems that the device you have was not properly separated from its prior owner, before to be delivered to your

  Settings - iCloud - which is your current Apple you see there ID?

• How can you find your restrictions password if you remember?

  How can you find your restrictions password if you do not remember?

  Read How to reset the forgotten password Restrictions with iPhone restore?

• You made too many attempts to answer your security questions. You can try again later or use your rescue email address to reset your security information.

  Hello

  My encounter with this error:

  You made too many attempts to answer your security questions. You can try again later or use your rescue email address to reset your security information.

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• How is it possible to specific your own, with the constant help of string to locate a directory where the NEW

  How is it possible to specific your own, with the constant help of string to locate a directory where the NEW
  created the folder to save?