Can I access a printer wireless wireless from my office?

Similar Questions

• HP 4630 all-in-one: install hp4630... print wireless from iPad... Unable to print from the laptop? All ideas

  Installed new hp4630 printer all in one... can print wireless from my iPad, but I can't print from my laptop?
  Recently upgraded to windows 10. Any ideas? I'm not very computer.

  Hello Tommyboy2,

  Welcome to the HP Forums.

  I see that you experience a problem when you try to print from your computer.

  Have you installed the software/driver for Windows 10?  If this isn't the case, please click on the following link for the e-all-in-one HP Officejet 4630 Printer series full feature software and drivers.

  Please let me know if you see messages or error codes on your computer or printer when you try to print.

  Thanks for your time.

  See you soon,.

• How to print wireless from my Iphone?

  I bought a new HP Officejet 6500 has more and he says I can print wireless from my iphone. Yet, I must find a way to do it. I find available wireless networks, but how the hell do I print from the phone to the printer?

  Hello

  Please use it to check and fix:

  http://www.Apple.com/support/iPhone/Assistant/AirPrint/

  Kind regards.

• My Officejet 6500 more suddenly stopped printing wirelessly from my iPad 2

  After working perfectly for several months, my 6500Plus HP E710n Officejet-z does not print wireless from my iPad2 or my iPhone 4 s. I use version 5.0.1 on these devices and had used this version before that the printing problem. I get the following message: "Officejet 6500 E710n-z [11E2A9] the printer is no longer available." The printer works fine (without thread) of my MacBook Pro in OS X 10.6.8 version. I "think" that there was an update from HP before it started, but I'm not sure of the timing. Any ideas on how I can get these mobile devices wireless print again?

  What router?  Reboot the router by pulling its plug momentarily.

  If this does not work, we will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Printer HP psc 1210xi range can be configured to print wireless?

  Hello Forum - anyone know if the printer mentioned above can be configured to print wireless or is it more cost effective to simply buy a new printer?       Run Windows XP thanks for any help-

  Perhaps you could get a wireless router that supports USB printers, but it would only print of this configuration, not scan.

  I recommend you to get a new wireless printer.

• Can you help me eprint wireless from my ipad to my HP7310?

  Can you help me eprint wireless from my ipad to my HP7310?

  Hello

  You have the HP Officejet 7310?   A few years?

• Computer can't find a printer Wireless Signal

  My computer is connected to our wireless network, but can't find the printer wireless also connected to the network. Here are some of my info. Someone has ideas of how to do to solve this problem?

  Windows IP configuration

  Name of the host...: work

  Primary Dns suffix...:

  Node... type: broadcast

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: hsd1.tx.comcast.net

  Local Area Connection wireless LAN adapter * 13:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Wi - Fi Direct map virtual #2

  Physical address.... : 26-DB-30-DA-26-50

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 2:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Wi - Fi Direct virtual card

  Physical address.... : 16-DB-30-DA-26-50

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Ethernet Ethernet adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Description...: Realtek PCIe FE Family Controller

  Physical address.... : F0-92-1C-EC-91-E9

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wi - Fi wireless LAN adapter:

  The connection-specific DNS suffix. : hsd1.tx.comcast.net

  ... Description: AR9485 Qualcomm-Atheros 802.11b/g/n WiFi adapt

  Physical address.... : A4-DB-30-DA-26-50

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv6 address: 2601:e:2880:4000:1f62 (Preferred)

  Lease obtained...: Thursday, March 19, 2015 11:56:09

  End of the lease...: Monday, March 30, 2015 09:55:28

  IPv6 address: 2601:e:2880:4000:b802:91 has 6:701 b: 7419 (Preferred)

  Temporary IPv6 address...: 2601:e:2880:4000:60ac:66ac:9534:45c1 (Preferred)

  Temporary IPv6 address...: 2601:e:2880:4000:bc50:2d9a:18fc:a414 (Deprecated)

  Temporary IPv6 address...: 2601:e:2880:4000:d150:f11:21 has 9: cbd8 (Deprecated)

  Address IPv6 local link...: fe80::b802:91 a 6:701 b: 7419 %3 (Preferred)

  IPv4 address...: 10.1.10.58 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Thursday, March 19, 2015 11:56:08

  End of the lease...: Tuesday, March 31, 2015 13:14:45

  ... Default gateway. : fe80::250:f1ff:fe80:0 3%

  10.1.10.1

  DHCP server...: 10.1.10.1.

  DHCPv6 IOOKING...: 61135664

  DHCPv6 DUID customer...: 00-01-00-01-1A-2C-70-2F-F0-92-1C-EC-91-E9

  DNS servers: 2001:558:feed:2

  2001:558:feed:1

  75.75.76.76

  75.75.75.75

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter ISATAP.hsd1.TX.Comcast.NET:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. : hsd1.tx.comcast.net

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:9d38:6abd:3871:178f:9d37:3318 (Preferred)

  Address IPv6 local link...: fe80::3871:178f:9d37:3318 %7 (Preferred)

  ... Default gateway. :

  DHCPv6 IOOKING...: 335544320

  DHCPv6 DUID customer...: 00-01-00-01-1A-2C-70-2F-F0-92-1C-EC-91-E9

  NetBIOS over TCP/IP...: disabled

  Hello

  Thank you for the information.

  I would like to inform you that we have a support forum dedicated to systems on area issues, I suggest you to send your query on Microsoft TechNet forum for this issue. You can get more effective suggestions and adapted by experts familiar with this topic.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope the helps of information.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• Direct print wirelessly from iPad Pro w/o third-party app?

  I want from my iPad Pro laser-printing on a printer wireless to work. My corporate network, however, is not configured to allow wireless printing; I have to work around the network with a direct wireless printing. I know that a lot of printers don't support not this, but everyone I've studied requires a third-party printing application. I'm sure that it will work very well, but I don't trust the manufacturers of printers to continue to support these applications.

  Is there a printer wireless laser available that I can print without a wifi network, directly from the iPad without a third party app?

  Thank you!

  John

  The printer you want to print unless on supports AirPrint, no, you would need an application.

  AirPrint allows to print from your iPhone, iPad or iPod touch - Apple Support

• Pavilion s-1217 can't find Canon printer wireless

  I have a HP printer, but I can't allow me to feed him, because of the Habs cartilages.

  I bought a Canon wireless printer and my 2 other HP computers can see and use it. My s-1217 Pavilion cannot see it.

  My printer has been verified by Canon and my router has been checked and updated by Belkin. Both work correctly.

  I called HP several times on this computer. The last time technology downloaded HP Print and Scan doctor but he can also not to see this printer.

  Cannon suggested that this computer isn't able to use IPv4.

  I had the help that solved my problem but @
  http://www.extremetechsupport.com
  An open forum where computer geeks help those who are not. Here is the Exchange:
  
  I bought a Canon wireless printer and my 2 other HP computers can see and use it. My s-1217 Pavilion cannot see it.
  
  My printer has been verified by Canon and my router has been checked and updated by Belkin. Both work correctly.
  
  I called HP several times on this computer. The last time your tech downloaded printing software HP and doctor Scan but he can't see that printer.
  
  Cannon suggested that the computer isn't able to use IPv4.

  AWS: "I think that maybe the tech meant that he can't use IPV6 IPV4 is the norm." "If your computer could not use IPV4, then you would not be able to use the internet at all the.

  No Canon technology said that this printer uses IPv4. The IPv4 address, according to the Configuration Page of the network printer printing is 192.168.2.4. No IPv6 address is listed. Belkin technology said that IPv4 is "almost obsolete" and the update of the firmware that it installed had an update to IPv6 capabilities but no change in IPv4. All three devices are under warranty and the tech barrel and several HP technicians have taken control away from this computer and installed the latest Canon drivers from the Canon website. HP said there is a software problem and that there is nothing wrong with the computer so that they will not return. Belkin (one HP tech blamed the router Belkin N750) and Tech Canon say their equipment is working properly, and in fact from two other HP computers that we have.

  Cindy E: to reset IPv4 "select Control Panel > select network and sharing Center > change settings card.»
  
  «Right click on the Ethernet connection, you want to change > select Properties > double-click on Internet Protocol Version 4 (TCP/IPv4) > here's your IP address settings.» When you have finished, select OK, and in the last window, click OK again. »

  Did the printer works fine now

• my friend can't access to my wireless, I gave him the password why?

  I gave him the password of the router, but does not always have access to my wireless

  Hello

  1. what exactly happens when you try to access wireless?

  2. you get any error message?

  3. you can access the Internet through connected?

  4. what operating system is installed on the computer?

  I suggest you to follow the steps from the link below and check if it helps.

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information is useful.

• HP Photosmart C410 PC can't find the printer wireless

  I have my printer wireless for a year and all of a sudden it stopped working.  The printer says that the network connection is good without error.  But the PC does not see it and says that it is offline.  I restarted the printer.  Restarted the pc.  Connect the printer cable and it works fine.  Reset the wireless upward.  When I unplug the cable from the printer, even once the pc can't find it.  I've looked everywhere and can't find how to solve this problem.

  My pc is running windows 7.

  I finally solve the problem by removing the printer from the computer and uninstall all related software and put it back, from scratch.  This seems to have solved the problem.

• Can scan but not print wireless

  HP Deskjet 3050 j610 printer all in one

  I have two PCs running Windows 7 Ultimate 64 bit, and Windows 7 Home Premium 32 bit on a network home.

  The Home Premium pc is connected via a USB cable and prints and scans OK. The ultimate is wifi and scan OK, but do not print.

  If I try to print a document from the ultimate pc, by selecting the network printer, the printer icon appears in the system tray, but no printing occurs.  Mouse on the icon of the printer displays "1 document pending".

  I used printing HP and doctor Scan and uninstalled and re installed all the drivers and software HP, nothing helps.

  Any help will be appreciated.

  Hello @oxley0cjy , welcome to the forums

  I understand that you can print and scan of your computer USB connected but cannot print from your PC connected wireless, however, can sweep her successfully. The print spooler may be necessary to restart, among other reasons.

  I see you tried some troubleshooting already, without success. I suggest to try all the steps that are listed in the guide below and you should be upward and printing again later.

  Print jobs are stuck in the print queue

  Let me know the results

• 2542 printer all-in-one: print wireless from my Acer laptop problem

  My printer is about 18 months old. Originally, it worked perfectly when installed everything first, a year ago, he stopped wireless printing. HP support person came on my laptop on the internet and took 45 minutes to make it work again. I didn't do anything, and now a year he stopped again to print wireless.

  My Acer laptop will print with a USB cable

  It will also communicate wirelessly with the levels of ink printer control etc.

  I can print E wireless from my Samsung Tablet and Samsung mobile.

  When I try to print wireless I get error message printer.

  I wouldn't change a thing, but I don't know about microsoft or Norton auto updates

  If you have recently installed Norton Security or received a new patch to update/update for Norton Security, you may need to reconfigure the settings of network devices later.

  Harry

  Norton support

• Satellite A110-277: can not access the internet wireless

  Hello
  I have a Toshiba Satellite A110-277. We have wireless internet access in our House and it was workin fine, but since a few days I can not access the internet. My laptop is certainly recognizing internet connection wireless, but through IE or Firefox it just does not connect.

  For some reason, he worked briefly through Firefox, but then that stopped. I don't see what anyone, I have done differently, other than (finally) updated Windows Media Player, but why would that cause problems, I don't know!

  I would really appreciate help as soon as POSSIBLE, that the internet is my lifeline to work!
  Thank you
  GcDh

  Hello

  You said
  > My laptop is no doubt recognize the wireless internet, but does not connect via IE or Firefox, it's just
  Hmm, I guess that you can connect to the WLan router and can insert the WiFi encryption key successfully right I'm right?

  How does LAN connection? Can connect you to the internet using the LAN cable?

  Feedback would be appreciated

• Cannot get photosmart 5520 to print wireless from my Macbook pro

  Hi-

  I tried for more than a month to get my computer to print wireless, and I can't make it work.  It will print the test pages, but when I try to print anything else I get the message "Printing - the printer is not responding.  I deleted and reinstalled the software of the printer 5 times.  I restarted the printer again and again.   I downloaded and installed this: http://support.apple.com/kb/DL907 but I still can't make it work.

  I have a MacBook Pro running OS X 10.8 and an Airport Express router.   Please help if you can!

  Well Yes.  I highly recommend you uninstall - you don't really need it.  Use its uninstaller in Applications > Symantec.