2542 printer all-in-one: print wireless from my Acer laptop problem

Similar Questions

• HP 4630 all-in-one: install hp4630... print wireless from iPad... Unable to print from the laptop? All ideas

  Installed new hp4630 printer all in one... can print wireless from my iPad, but I can't print from my laptop?
  Recently upgraded to windows 10. Any ideas? I'm not very computer.

  Hello Tommyboy2,

  Welcome to the HP Forums.

  I see that you experience a problem when you try to print from your computer.

  Have you installed the software/driver for Windows 10?  If this isn't the case, please click on the following link for the e-all-in-one HP Officejet 4630 Printer series full feature software and drivers.

  Please let me know if you see messages or error codes on your computer or printer when you try to print.

  Thanks for your time.

  See you soon,.

• How to print wireless from my Iphone?

  I bought a new HP Officejet 6500 has more and he says I can print wireless from my iphone. Yet, I must find a way to do it. I find available wireless networks, but how the hell do I print from the phone to the printer?

  Hello

  Please use it to check and fix:

  http://www.Apple.com/support/iPhone/Assistant/AirPrint/

  Kind regards.

• My Officejet 6500 more suddenly stopped printing wirelessly from my iPad 2

  After working perfectly for several months, my 6500Plus HP E710n Officejet-z does not print wireless from my iPad2 or my iPhone 4 s. I use version 5.0.1 on these devices and had used this version before that the printing problem. I get the following message: "Officejet 6500 E710n-z [11E2A9] the printer is no longer available." The printer works fine (without thread) of my MacBook Pro in OS X 10.6.8 version. I "think" that there was an update from HP before it started, but I'm not sure of the timing. Any ideas on how I can get these mobile devices wireless print again?

  What router?  Reboot the router by pulling its plug momentarily.

  If this does not work, we will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• install hp officejet j4550 all-in-one for drivers from the Web site. all works except scan option

  all-in-one for drivers from the Web site. all works except scan option

  what OS you have... Windows 7, Vista XP? and when you try to scan it is out of the front of the printer or from the software of the PC... and when you try to analyse what is happening.

• I have problems wireless on my Acer laptop which has Windows Vista. I am able to connect to my school of university network and used to connect to my home network.

  original title: Wireless on the Fritz

  I have problems wireless on my Acer laptop which has Windows Vista.  I am able to connect to my school of university network and used to connect to my home network (both are networks limited requiring a password or log in).  However, last week my computer stopped connecting to my home network (no one else has this problem with the home network).  I tried to fix the problem, but my computer says that "Wireless association failed because Windows did not receive response from the access point or wireless router."  That said also thatthe connection "(my wireless network)" has been cancelled.  This is perhaps due to a timeout or user action. »

  The only different thing I did last week was click option at my University 'connect long-term' instead of 'connect short term' to their wireless network.  Maybe who has messed up my settings?  That's what my University said of his record long term: "students, faculty and staff also have an option to easily record their computer (or other wireless devices), so that it is not necessary to authenticate each day they connect from the network wireless campus, to resources outside the University.»  However, these settings are saved on their network (I can access it online from another computer), so I think it is unlikely that he messed up my settings.

  I don't really know what the problem is.  Any ideas as to what I can do?  I don't want to reset my computer everything.

  Thank you!

  Hello

  You can view these methods:

  Method 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Method 2:
  I suggest also allows you to check in SafeMode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  Method 3:
  I also suggest you to check the settings of the router firewall.

• 6600 printer all-in-one is offline and wont print wireless from laptop

  My 6600 not connected wireless all in one printer shows offline will not print from my computer laptop (Windows 8) worked all the way until last week, that he just decided to stop printing

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• HP Officejet 4620 e-all-in-one stop wireless print whenever it is turned off

  My HP 4620 stop wireless print whenever it is turned off, although it is connected to the network (by the results of the test network wireless, pass & the quality of the signal is excellent).  No troubleshooting - HP Print & Scan Doctor work there is no help, I have to uninstall & reinstall the printer each time to be able to print wireless again.

  I use it on/on button to turn the printer off, don't disconnect not.

  Please help, or I need to return to the store, this is the third time!

  I also had the same issue and after a few game it seemed to have fixed so here's what I did... Hope this helps someone else.

  -My printer is connected to my wireless network.

  -On my computer that I'm connected to the printer through the IP address 192.168.1.153... (Yours may vary) in a browser

  * You can find the ip address printers on the control panel of the printers by pushing the wireless button and pushing the ok option 1, it should appear with the intensity of the signal and the ip address is at the bottom.

  -Once I was on the Printers page in my browser, I went to the tab network at the top.

  -Then to Internet Printing Protocol section (on the left in the advanced settings)

  -On my own PPI was already on, but the location was empty I put a '1' in the location box and then applied settings.

  -C' is the only thing that I changed and now my printer is asleep as always, but when I print something from my iphone, mac or pc it wakes up and prints as it is supposed to!

  BTW before I went to the printer via the browser. I changed layout sleep in 15 minutes via the Control Panel on the printer itself, don't know if it helped the issue or not because I still had the problem of sleep after I set the timer to 15 minutes instead of 5 min. But I solved my problem after performing the steps above!

  Also note that on the one hand some ppl on here say it's a network problem or a router! This is NOT the case I never even tried these roads and I solved my problem only by changing the setting of the printer! I have not set a static ip address or something like that!  The above steps is things ONLY I touched and my problem is SOLVED!

  Router: NETGEAR AT & T 7550 wireless router/dsl Modem

  -Security: WPA2-PSK (AES)

  -Printer connected to the router via WPS (push button configuration)

  Printer: HP Officejet 4620e all-in-one

  Computer: Apple iMac OS X Version (connected to the network via wifi) 10.7.5

  Dell running Windows 7 server (connected to the network via wifi)

  Apple iPhone 4S (connected to the network via wifi)

• HP Office Jet All in One 6700 wireless print sometimes it works and sometimes it doesn't?

  I have a new HP 6700 all-in-one.  I have a Win 7 desktop pc and a laptop Win 7.  Sometimes I can print from my laptop to 6700 sometimes and not others.  Once it will not print a word doc, next time. same thing for excel.  Cannot do print PDF files and web pages.  I am at a loss?

  Hey, I'm glad I could help!

• HP Deskjet 3050 all-in-One - scan wireless; DO NOT print wireless. Just moved.

  Hi, I just moved.  Until I move, I was able to print and scan wireless.  Since his arrival, I've only been able to scan wireless not print wireless.  Wireless printing works very well for my roommate.  Everything seems fine until I try to print and then it just says: 'Error' for print job status, without any explanation as to why there is an error.  I am abe to print if I connect via a cable to the printer.

  Help!  What Miss me?  Thank you!

  Moor_lady wrote: Hi, I just moved.  Until I move, I was able to print and scan wireless.  Since his arrival, I've only been able to scan wireless not print wireless.  Wireless printing works very well for my roommate.  Everything seems fine until I try to print and then it just says: 'Error' for print job status, without any explanation as to why there is an error.  I am abe to print if I connect via a cable to the printer. Help!  What Miss me?  Thank you!

  Hello Moor_lady, if you are using Windows 7, you can try to reset your printer wireless.

  Go to control panel of configuration, devices, and printer and in the menu bar above, select Add a printer in the lower option, select Add a network, wireless or Bluetooth printer.

  There should be another window that shows all available printers to be added. See if your wireless network printer can be found. If so, select this option and continue the process.

• What I have LAN in order to have printing wireless with my two laptops and 6520 all-in-in-one?

  I have two laptops and you want bluetooth my all-in-one printer to 6520. Do I need something else, such as a router or a LAN?

  Hello

  The 6520 does not support bluetooth, so you cannot use bluetooth. You can use the configuration of an ad hoc network. Please see the following book:

  http://h10032.www1.HP.com/CTG/manual/c00389927.PDF

  Kind regards.

• Laptop HP Pavilion: can no longer print wireless from my laptop

  My sister has a HP Pavilion 64-bit laptop, running Windows 8.1. There the WAP2 encryption. His Plusnet 0FC0A8 wireless router and the modem is BT Openreach

  It has a network HP Photosmart Premium Fax all-in-one Series - C309.

  Until lately, she has been able to print from the laptop, but not more, even if the other laptops in the household can still do.

  We did the test page and followed all the instructions. Where are we mistaken?

  Can you advise?

  Did you run the diagnostics to http://www.hp.com/go/tools ?  What was the result? Diagnostic tests could "see" the printer on the network?

  If you put the IP address of the printer into a browser's address bar will open: the printer Web server integrated?

• I can print wireless from my vtab 1008?

  I have a Photosmart C309a.  Can I use my Vizio VTab 1008 to send a print job on my printer?

  Hi Adak1952,

  Web of TouchSmart from HP Photosmart Premium all-in - One Printer Series (C309) only supports Print Apps it does not support ePrint.  However, or to download and use app HP ePrint home & Biz.  HP ePrint home & Biz is a free application for mobile devices that allows you to view, share and print photos, documents and Web pages. You can print the C309 wireless in a local Wi - Fi network.

• I get an error message when I want to print from my laptop on my Lexmart printer wireless. It is said "problems connecting to the printer.

  original title: devmgmt msc

  I get an error message when I want to print from my laptop on my Lexmart printer wireless. It says "connection to the printer problems" sometimes he just complained and then prints, sometimes it won't print at all. I hate the thing!

  Hello

  I suggest you to see link below and check if it helps.

  http://www.Lexmark.fr/publications/pdfs/810/winug/Eng/UGnetwk.html

  I suggest also you see the steps from the article below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• Direct print wirelessly from iPad Pro w/o third-party app?

  I want from my iPad Pro laser-printing on a printer wireless to work. My corporate network, however, is not configured to allow wireless printing; I have to work around the network with a direct wireless printing. I know that a lot of printers don't support not this, but everyone I've studied requires a third-party printing application. I'm sure that it will work very well, but I don't trust the manufacturers of printers to continue to support these applications.

  Is there a printer wireless laser available that I can print without a wifi network, directly from the iPad without a third party app?

  Thank you!

  John

  The printer you want to print unless on supports AirPrint, no, you would need an application.

  AirPrint allows to print from your iPhone, iPad or iPod touch - Apple Support