can I configure an IPv4 address and IPV6 on the same NETWORK card

Similar Questions

• Configure DHCP (get guest and host on the same network)

  First of all, I want to thank everyone for all the help that has given me so far.  I apologize that I'm such a newbie to virtualization, but I learn fast!

  I'll have set up a printer (HP OfficeJet J4860) wireless.  Here is my configuration:

  Computer: Dell computer Inspiron 1318 laptop

  VMPlayer Version: 3.0.0 build-203739

  Host o/s: Fedora 12 Linux 64-bit (2.6.31.12 kernel - 174.2.3.fc12.x86_64)

  Comments o/s: Windows 7 Home Premium

  Guest network settings: NAT (using DHCP)

  The problem I have is that the configuration of HP printer utility complains that the IP address of the printer (192.168.0.102) is not on the same network as the client (172.16.79.1).  So, in order to install the printer, I need to configure the VMware DHCP server to use IP addresses in the range 192.168.0. *.  I tried manually editing /etc/vmware/vmnet1/dhcpd/dhcpd.conf and /etc/vmware/vmnet8/dhcpd/dhcpd.conf (Yes, I know, the files that you are not supposed to change these, but I tried anyway).  Who broke everything (guest couldn't access anything whatsoever!), so I put the original files of dhcpd.conf.  I also tried to change the settings of the VM guest network to bridged and assigned a static IP to the map in Win7, but that does not work either.  (I did not try to use the Host parameter only because I don't have any idea what this means?)

  Could someone guide me please you through the configuration process of the range of IP addresses to the DHCP server on VM or manually assign IP addresses bridged network or host-only?  I have attached copies of my config output files and the vmnet1 and vmnet8 ifconfig in the case where it is useful.

  Thank you, in advance, for any help.

  Best regards, Chris

  P.S. If this question has already been answered, I'm sorry for the redundancy.  I'm looking through the forum, but I am come with has been set to the "NAT" VM network and map comments to "Using DHCP".  So, if this has been answered before, please point me to the thread.

  According to the ifconfig_output.txt IP address of the host is 10.41.1.111, and you say the IP address of the HP printer is 192.168.0.102 if the host cannot yet access the printer on this subnet so neither will be the guest who is on the 172.16.79.x subnet.

  How the host receives its IP address?

  Is there a router in the game?

  If so you can assign the guest Bridged to so it will then get an IP address from the router and then the host and the guest will be put on the same subnet and then you configure the HP printer to have an IP address that is on the same subnet but make it a static address that is outside the scope of the Pool of addresses IP DHCP servers as it better to have the printer to use a static address and not a single one in the range that would be affected through DHCP.

• Can I install VAC on Mac and PC on the same network?

  My license is a license for the team and if I need to install it on my MAC and PC.

  They both were connected to the same network, it's illegal?

  I will only use MAC or PC in this network.

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

• Ipv4 and ipv6 on the same ACL line vty

  Hello everyone.

  I just want to confirm if I can protect a router (telnet and ssh) put 2 ACL (an IPv4 and other IPv6) on the same line vty. Something like:

  line vty 0 4 access-class hostsIPv4 in ipv6 access-class hostsIPv6 in

  I have to use named ACL?

  Thanks in advance

  Yes,

  You can do it.

  line vty 0 4

  access-class 60 in

  class to access acl-ipv6-IPv6, in

  transport input telnet ssh

  Kind regards

  Herbert

• Can I install OBIEE 10 g and 11g on the same machine?

  While I'm waiting for new hardware, I wanted to start on the installation of OBIEE 11 g on my laptop. Can I do if I have already 10g installed?
  
  I want to assure you that if I install that it will not affect my current configuration of 10g. I don't know if it substitutes for certain files and folders, or if I can do a separate install for both.

  Hi, I installed OBIEE 10 g and 11g of the same machine (by car).

  Because the installation of 10g OBIEE was the first, it took the 9704 and 9703 port for messages of the BI server.

  Then I installed the OBIEE 11 g installation used the port 9500 (analytical) and por 9702 for BI server. It has also used port 7001 to Weblogic Administration Console.

  The two instances of OBIEE works great!

• Why can't acquire data from strain and resistance at the same time with a NI 9219 module?

  Hello

  I use a chassis with a NI9219 module 9172 cDAQ to try to acquire the strain and resistance at the same time, with the Labview SignalExpress software.  Is this possible?  When I try to display two values of signal at the same time, I get an error of assistant DAQ 50103 'the specified resource is reserved.  The operation could not be performed as indicated.  I used to be able to acquire the strain and tension at the same time, but now even that gives me error 50103.  I have hours trying to figure this out.  Any help would be greatly appreciated.

  Thank you

  Justin

  That's all!  Thank you very much, now I can sleep tonight - seriously!

  Thanks again,

  Justin

• [French] Can I install Photoshop Elements 10 and 11 on the same computer?

  can we do coexist Photoshop elements 10 and 11 on the same PC?

  Title of the message was edited by: Brett N

  Yes, each program is autonomous.

  Both versions use the same files. Organizing United Nations elements privilege creates pour each photo without duplication.

  http://help.Adobe.com/fr_FR/ElementsOrganizer/9.0/using/WS0A018322-3DDA-4d0b-845C-F7374D1C 6FF9_WIN.html

• Advantages and disadvantages of the use of the same network card to the network management and production (all my virtual machines) VLAN?

  Hello

  I have an ESXi. The management network and the virtual machines vlan through the same network adapter.

  What the disadvantages are to do?

  Can you help me please?

  Thank you in advance,

  Kind regards

  Garish

  Well well, in this case. This is a perfect case of SPOF, try to reach NIC teaming to avoid this.

  At least two cards physical network is necessary in your hardware ESXi host to do.

  Download an official guide of VMware Networking from the following URL, it has got everything you need and much more.

  http://pubs.VMware.com/vSphere-55/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-552-Networking-Guide.PDF

• Can I create multiple notebooks address with some of the same people in more than one case?

  I have several addresses for different accounts books. I can move people in an address book, however, which removes them from the first. I want to be able to 'copy' instead of 'move', while some are at more than one address book.

  Hold down the CTRL key while dragging from an address book to another.

• Can my MG6320 to connect wired and wireless at the same time?

  I have a MG6320 on a wired / wireless internal - can he connect both at the same time, or what I have to choose one or the other?

  Hello.

  Only one network connection may be used at a time.  They cannot be used simultaneously.  This is the case even for one of our products PIXMA network with Wi - Fi and ethernet connections.

  If additional information is required, please call us at 1-800-OKCANON.

• Can I view a PDF bookmarks and thumbnails at the same time?

  Can I view a PDF bookmarks and Navigation panes Page thumbnails at the same time? If I can't do it, can it be possible? It is a constant source of frustration.

  Only one of the components of the navigation can be active at a given time, so it's the thumbnails or bookmarks and not both at the same time.

• Can we run a LabVIEW VI and downloaded at the same time on Arduino code map Arduino?

  If we use LabVIEW to write data in series to an Arduino, can send us on the Arduino code before you run the VI so that the Arduino has something to do with the signals it receives from LabVIEW? Specifically, we want to use the digital IO pins to read into a signal on the Arduino (provided in series by LabVIEW) and do something with the signals as a LED lights up. Is that what most people do?

  Our project includes a parking meter and we want to use the Arduino by itself, but first we want to simulate the code using some signals that we want to move through LabVIEW. Basically, the meter said the Arduino, if they are paid, and if there is five minutes or less remaining on time. Based on this information and data from a PING sensor, we will determine which exit to turn off (a flashing LED to different frequencies to designate two different messages).

  Sorry if my question is not clear or if it is trivial; my partners and I are very new to LabVIEW and the Arduino, and we try to get this working soon.

  The LabView VI Arduino library is designed to work with the Arduino as a USB DAQ/DIO.

  This isn't really what you're after...

  I don't really know how LabView would be useful in this project.

• How can I share documents between XP and 7 on the same computer?

  I installed 2 windows xp and a windows 7 on my computer how can I share their documents

  Use one of these guides:

  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/

  http://www.TechRepublic.com/blog/window-on-Windows/how-do-i-make-Windows-7-HomeGroup-content-accessible-to-Vista-and-XP/1910

• Can I install Acrobat XI Standard and Professional on the same computer?

  need help to activate my adobe pro xi requires the standard xi adobe srial number I have on my computer in my computer

  You can't have both xi acrobat standard and pro is installed.

  If you bought both, you must uninstall the standard in order to install pro.

• Can I install After Effects CS6 and CC12 on the same computer?

  I use CS6 in a class, and one of my students used CC12 to complete his project. Since CS6 cannot open a CC12 project, I want to install CC12 on my computer to open and view it, but I want to assure you that it won't screw up my ability to open all the world projects that use CS6. Besides, I don't want to use CC12 because our school has only CS6, and I don't want to do anything at home that I can't bring to the school.

  In the past, I had problems with the installation of a duplicate software versions and won't have to uninstall and reinstall CS6...

  Yes