Can I have a checkbox that checks a series of other boxes?

I have a checkbox located above many other boxes on a sheet. I want the box to be used to 'check all' by checking all the boxes below it when selected. I'm sure that there is a script for this but I don't know.

Thank you!

Try this:

var suffix=/(\w+_)D$/.exec(this.name)[1];
var i=1;
while (xfa.resolveNode(suffix+i)!=null){
          xfa.resolveNode(suffix+i).rawValue=this.rawValue;
          i++;
}

Kyle

Tags: Adobe LiveCycle

Similar Questions

  • How can we create a promotion that is not out of the box?

    Hello
    How can we create a promotion that is not out of the box?

    Hello

    You can create a new descriptor from point to point in atg/commerce/pricing/pricingModels.xml.

    ~ Abdelali

  • How can I have a button that will show/hide one area of text and images on the same page?

    I have a page like below:

    4ef3986b768c1642dac40a3eb1d534dc.png

    I want to make sure these 3 buttons display text different under them when they are pressed. How can I achieve this?

    Thank you.

    Hello

    Please try to use the Widget for Composition of ToolTip to achieve this...

    You must customize the trigger as long as the button and you can use the target to insert images or the desired text area.

    You can find it in library of Widgets Panel > composition

    Please let me know in case you need further details on that.

    Concerning

    Vivek

  • How can I have a path that is in the front and the rear of another shape?

    I have an elliptical shape with a path that dress. The path has a tip of arrow and applied back.  I want only the tip of the arrow head to go behind the elliptical shape and at the back of the arrow rest on top of the elliptical. The problem is, I tried the way by cutting with scissors and he applied the arrow head and towards the two newly created paths. I remove arrow and make a simple line, send the way before that was cut at the back so it goes behind the elliptical shape, and to join the two paths and apply to arrowhead again, however, now that it sends the path before forward?

    How can I do this?

    I-this is essentially a vidoe of the fact, except Monika I use the Eraser tool because I think it's a little easier to understand and do.

    Also take note of the stacking of the trajectory of the copi circle which is important.

    http://www.wadezimmerman.com/videos/OverlapPaths.mov

  • How can I have an animation that leads to a youtube video?

    The page opens and displays an animation I need to blur (it already does).

    After he disappeared, I want a video youtube to display. How can I do this?

    Thank you

    I think you use the embed video code, you must add value for automatic playback.

    Check out this document which explains how this can be done:

    https://support.Google.com/YouTube/answer/171780?hl=en

    Thank you

    Sanjit

  • How can I create a chart that creates new series each year when the data are not collected on a daily basis?

    I collect numbers "occasionally" of my solar system and to create a standardized chart that shows that the generation on an annual basis, so I can compare fall in the fall of each year, etc..

    Because the information is not strictly 'daily' (just whenever I get to it), I don't know how it normalize for several years.

    For example, if I had

    Date - Kw/day

    15/01/10 - 14

    03/04/10 - 18

    18/04/10 - 17

    01/06/10 - 19

    21/09/10 - 15

    03/12/10 - 9

    07/02/11 - 13

    02/05/11 - 16

    17/08/11 - 18

    01/11/11 - 12

    02/11/11 - 12

    05/01/12 - 9

    04/06/12 - 12

    and so on.

    What I'd like to see is a line graph for each year from January to December with these datapoints on it. I have much more "incremental data" that I presented above, but it's on "random dates" during the last 8 years, and I'm just trying to see how each year compared to other years.

    To be at the front, I tried to understand how this in Excel as well, but he could not understand where the other.

    DRM for any tips/tricks/tips!

    Steve

    This might work for you...

    I placed your data in a table named "Data."

    Create a second (in this example, titled 'Table 1')

    In the table 'Table 1' months are in the first column and the first row (which is a header row) contains the years - add columns to add new year:

    B2 = if (SUMIFS (data: $B, data: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" "") > 0, SUMIFS (data: $B, given: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" ""), "")

    It's abbreviation dethrone select cell B2 and type (or copy and paste it here) the formula:

    = IF (SUMIFS (data: $B, data: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" "") > 0, SUMIFS (data: $B, given: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" ""), "")

    Select copy of cell B2

    Select the cells B2 at the end of F13, dough

    now select cells A2 through F13 and add a graphic (the XY scatter diagram)

    Add new year add one (or more) new columns for "table 1", then add the year to the top:

    Now alone, click the chart to activate the chart.  then click on the button 'change data references '.

    now, drag the data reference control handle to the right to add the new year to the table:

    You can add several years to the time, so you don't have to it very often

  • How can I have with these positions columns in MY EMAIL IN BOX: FROM, to, SUBJECT, DATE SENT

    I have columns with the following headings in MY Inbox

    DE TO TOPIC Shipping DATE                 

    Depends on your e-mail client, but probably yes.

    If you use Windows Live Mail (for example), just go to your Inbox, right-click FROM or TOPIC for example, click COLUMNS. Then check the boxes you need I.E. '.

    Once the 'TO' column is listed just click to select it and drag it into the order that you need them.

  • Can you have bookmarks in a document of fm and other beginner questions?

    Hello

    I just took an assessment of Framemaker to accelerate the generation of pdf and html, as I currently

    Use a single source tool developed in-house.  I used latest Framemaker when it was version 6 and I

    a few questions about things I would like to be able to do:

    Can I view the bookmarks in a document, standard framemaker, like in Word? I find that this makes it easier to

    navigate around the documentation, or is there a better way? I don't know their definition in the PDF file, this

    is for me as the author...

    I got just the Autonumbering once again kick, but have not found out/understood how to keep my legends of the figures

    with the images that I imported a framework anchored, if any help you can give me would be appreciated

    with that.

    Output PDF is great and the speed of the savings is ideal even for large documents. Is there a real advantage

    have a lot of several chapters in a book, rather than a long document? My longer document is of approximately

    280 pages and consists of four sections, with Appendix, glossary, index and table of contents.

    Output HTML seems to be as bad a I remembered 6 years when I used Webworks Publisher to

    perform the conversion. RoboHelp is a good alternative I organized an assessment from next week

    so have not had the chance to look at this yet, but would be interested in what people think.

    Thank you very much in advance for your help.

    See you soon,.

    Karen

    AKACB wrote:

    Hello

    I just took an assessment of Framemaker to accelerate the generation of pdf and html, as I currently

    Use a single source tool developed in-house.  I used latest Framemaker when it was version 6 and I

    a few questions about things I would like to be able to do:

    Can I view the bookmarks in a document, standard framemaker, like in Word? I find that this makes it easier to

    navigate around the documentation, or is there a better way? I don't know their definition in the PDF file, this

    is for me as the author...

    Hi, Karen:

    In FrameMaker documents, you can navigate to something that will become a link in a PDF document to its source, with a "hyperclick" on the page entries table of contents and indexes in the generated files and references or hyperlinks not generated documents. A hyperclick is Ctrl + Alt + click. There is no click back. You can lock the FrameMaker documents to make these active links with a single click and use the dos commands and others on the Navigation menu that appears when a locked document is active.

    To lock or unlock a document for the type of hypertext navigation and release these keys in order: F Escape (must be uppercase) l (lowercase ' el' not important 'eye' or number one) k (must be lowercase). I remember as "(F) Island (l) oc (k).»

    Google search for words like 'Lock of FrameMaker for hypertext Documents' and "FrameMaker navigation Menu" without the quotes, for more information on these techniques.

    Also, you can use the dialog box insert reference allows to browse some sort of plan file, by selecting a paragraph format such as a cap, on the left and scroll through these paragraphs on the right. Page numbers, you can see the list below indicate the first and last page of the paragraphs in the list above. It's a little inaccurate, but useful.

    You can also generate table of contents or index or list of external cross-references (special > list of > references > external cross references), and then close window of the file generated to fit in the workspace to the sides of the active document. Hyperclick in the generated files, or lock files and a simple click on an entry, to navigate to the location linked in any other file is advanced to.

    HTH

    Kind regards

    Peter

    _______________________

    Peter gold

    Know-how ProServices

  • Media Center Question can I have set up as a server and the other two as clients, each using two of the tuners of the card?

    I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.

    Any ideas?

    On Fri, September 19, 2014 12:28:56 + 0000, SamJ008 wrote:
     
    > I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.
    >>
    >>
    >>
    > Any ideas
     
     
    Start reading here
     
    You will not be able to use your existing tuners like tuner network. Microsoft has
    arrested development of Media Center, so don't expect any new hardware/software to
    appear.
     
     
     
    __________________________________________________________________________________________________
    Barb
    MVP Windows Entertainment and connected home
     
    Please mark as answer if that answers your question
     
     
     

  • Can we have three sets of Essbase on the same Linux box?

    We have three versions of HSS and planning on three different servers to Windows - one for the DEV, others for the stage and TEST.
    We have also three mounted 11.1.1.3 Essbase servers on a 64-bit Linux (one for DEV, others for the stage and TEST).
    Install DEV planning could be confused as to which Essbase is using the address because they all reside on the same 64-bit Linux box?
    Did someone correctly set schedule with three Essbases on the same LINUX box?
    I asked precisely because install DEV planning seems to work but REFRESH planning filters is not created in Essbase filters.
    In addition, CSSexport does not seem to recognize security Essbase.

    Do you mean that it does not all filters or the worst.
    Did you give the user access Essbase writing role?

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Check several choices and limit box

    Hello

    I created a quiz on as3. This is the code I used for radioboxes:

    var quizscore = 0;  score. "" Text = quizscore + "";

    var group1:RadioButtonGroup = new RadioButtonGroup ("question1");

    A1. Group = a2.group = a3.group = a4.group is group1;.

    submit_btn.addEventListener (MouseEvent.CLICK, myquiz)

    myquiz function (event: MouseEvent): void {}

    If (group1.selection.label == "Correct answer") {quizscore += 10;}  nextFrame(); }

    else {nextFrame() ;}

    }

    A multiple choice question so I want to use the checkboxes. can I use the same type of method for checkboxes?

    That is to say. If the value of the selected box is 'this' and then add 10 points. This question has two answers; have I can limit how many checkboxes are checked before they reach submit it?

    can anyone help?

    Thanks much :))

    Since you use frames as the mechanism to change the quiz, the scripts on each image can mutate a little to treat each question easily.

    In each script of frames, you can decide what values are correct for this image and use the existing logic you use to determine if something is correct. Using the property selected box will tell you that are selected in order to compare that to the right answer, for example:

    If ((checkbox1.selected && checkbox2.selected && checkbox999.selected))

    {

    OK, what you want

    } else {}

    incorrect, do something else

    }

    There is on the other side as well, you usually want to check that some boxes are not checked (wrong answers), then just add! in front, for example: if (checkbox1.selected &! checkbox2.selected) {/ / 1 is selected, 2 is not}... If you have a few questions with 20 possible responses the strategy is not elegant then mention if you do.

    Limiting the number of checkboxes that can be archived is possible in a variety of ways. The simplest is telling the user how much can be verified, which allows them to check that a lot as they want and the submission of the response, check the number of responses is within your limits. It is not the best way, but it is easier. Literally just loop through boxes and County. If you name the answer with a number boxes (checkbox1, checkbox2,... checkbox99) you can even browse them in this way, for example:

    define a range of 1-3 answers

    function checkAnswers(e:MouseEvent):void

    {

    response range

    var minAnswers:int = 1;

    var maxAnswers:int = 3;

    detected number as selected

    var selectedAnswers = 0;

    total number of checkboxes for that matter (checkbox1, checbox2,... checkbox20)

    var totalCheckboxes:int = 5;

    for (var checkboxNumber:int = 1; checkboxNumber<= totalcheckboxes;="">

    {

    If (this ["checkbox" + checkboxNumber] .selected is true)

    {

    increment the selected answers

    selectedAnswers ++;

    }

    }

    a simple check because if it is in the range

    If (selectedAnswers > = minAnswers & selectedAnswers)<=>

    {

    number is located, continue

    }

    on the other

    {

    out of reach, warn the user on the number of responses

    }

    }

    When they click on which key you have you can have the Manager to do what he does and also to trigger this function...

    myButton.addEventListener (MouseEvent.CLICK, checkAnswers);

    There are ways much cleaner to do, but because the question is basic I give you just a simple way to manage the solution. If you are a lot more in the script and the reusability I can suggest other ways, but as they are less painful, they are more complicated.

  • I can cause a ticking a box to add 1 to a calculated field?  I have a field that summarizes the numbers entered in several previous fields and must be able to add '1' If a checkbox is enabled as well.

    I can cause a ticking a box to add 1 to a calculated field?  I have a field that summarizes the numbers entered in several previous fields and must be able to add '1' If a checkbox is enabled as well.

    My first sample: If all the checked Checkbox event.value wins 1

    My next sample: If one of the boxes is enabled event.value wins 1

    Event.Value =

    this.getField ("Check Box16") .isBoxChecked (0) |

    this.getField ("Check Box17") .isBoxChecked (0) |

    this.getField ("Check Box18") .isBoxChecked (0) |

    this.getField ("Check Box19") .isBoxChecked (0) |

    this.getField ("Check Box20") .isBoxChecked (0)

  • I can't have the deleted messages from the server after that they landed in my box in. There was a checkbox in the settings of the server to "leave messages on server".

    My other 2 accts in THB have the checkbox to remove the message from the server. they are configured as a POP mail server The new account is IMAP if this has any bering.

    There. With IMAP, all mail is handled on the server. You can move messages from the server to your 'Local folders' account if that's what you want to do.

  • I already have the complete steps to install the demo, but I can't download it because I have to confirm or check the D, but they sent the confirmation of another e-mail account that is not mine

    I already have the complete steps to install the demo, but I can't download it because I have to confirm or check the D, but they sent the confirmation of another e-mail account that is not mine

    Please register again with a new email address.

    Make sure you have access to this email address.

    Concerning

    Megha Rawat

  • Hi, I have a PDF form that has multiple check boxes. Some boxes have values (off, yes) that others have just (Yes). How can I get the value of "Off" to all of the other boxes as well. Any help is greatly appreciated.

    Hi, I have a PDF form that has multiple check boxes. Some boxes have values (off, yes) that others have just (Yes). How can I get the 'Off' the value assigned to all the other boxes as well. Any help is greatly appreciated.

    'Off' is the default value of any box when it is not checked. It can not

    be changed.

Maybe you are looking for