Can I have two licenses on the same name?

Similar Questions

• It is possible to have two tables with the same name in Oracle!

  Oracle Version: 10 gr 2
  
  MS Access 2007, I had to use the 'Export' by which I copy a table (and its data) to an Oracle schema via an ODBC connection. Later, I realized that, during the copy of tables with a mix of lower and upper case names, the table does not copied (exported). But MS Access will give you the message that table obtained export successfully.
  
  MS-Access mess around Oracle data dictionary.
  
  When you issue

  SQL>select * from tab;
  
  TNAME                          TABTYPE  CLUSTERID
  ------------------------------ ------- ----------
  AMStates                       TABLE
  Version                        TABLE

  You will see the names of the tables. But when you try to DESCRIBE or SELECT this table, you will

  SQL>desc Version
  ERROR:
  ORA-04043: object Version does not exist

  You can even create another table with the same name in the schema

  SQL>create table VERSION (X NUMBER);
  
  Table created.

  Why this is happening and how can I bring these items 'non-existent '?

  Hello

  Use

  SQL > desc 'Version '.

  Or

  SQL > select * from 'Version '.

  Or

  SQL > drop table 'Version '.

  To overcome the problems of mixed-case.

• I have two files of the same name in the same directory. If it can happen?

  I've attached a screenshot of this. This isn't a photoshop, I always have that. There are two folders named my videos in the same directory T. However when I look through the window run, typing T:\, it showed my videos and videos such as fall down in this directory...

  

  One of the record is fair 'videos' but configured (in desktop.ini) appears as "my videos."

• How can I have two instances of the same open page to separate tabs?

  New 4.0.1 on a Win7 machine - last week using. It happens in time I want to open the same page twice. In the case of today, it's because I need to fill out a form and the need to look at a previous version - filled - in the same form that opens with the same URL. I've done this before, on the old machine with the next recent FF and Win XP.

  Thank you and I love Firefox!

  You can middle - click reload on the side of the right end of the address bar to open the same page in a new tab.

  • Switch to no more Tab: https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more/

• Can we have two textures for the same project?

  Hi all

  I use Captivate4. In my project, the transparency of the background for reading bar controls is 100%. If the texture would be considered to be the background of the PlayBar. I have a requirement to hide the commands of reading in a few slides. Then I would change my texture to another image. In short, I want to show a single texture when the play bar is visible and another texture when the play bar is invisible.

  Is this possible?

  Thank you and best regards,

  Kartik.

  In Captivate 4, to achieve something like this, you must use a picture placed on the layer immediately above your background layer with your PlayBar in the overlay mode.  Then turn off your PlayBar would reveal the image below instead.

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

  If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

  Hi cliffwho

  You can fill with connections to the LAN. However I recommend you read this first to understand what it is that you do. I hope this helps.
  http://TechNet.Microsoft.com/en-us/library/bb457038.aspx

• can I add another license to the same e-mail address

  Hello. I use creative cloud on a desktop and laptop. I could buy another computer. Can I add another license to the same account/email address? I don't see a way to do it. This is how I could use licenses on up to 4 devices.

  Thank you

  Andrew

  Hello

  In case you want to use on 4 machines, please purchase a subscription on a different Email address.

  Adobe has moved to based on the identity of license with a technology that will not support multiple licenses and products, you can buy only one membership per Adobe ID. If you need two memberships creative cloud, you can buy each with a unique Adobe ID. You can also buy a creative cloud for membership of the teams, which allows you to buy and manage several places under an own account.

  Also, you can read:-https://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  I hope that answers your query!

• How can I separate two movies on the same timeline?

  I use the first elements 11 but that you him have not used for quite awhile so I forgot much of what I learned. So here's my question: I have two movies on the same timeline. How can I separate them. In other words, how can I move one on the timeline, so it won't confuse my editing on the other? But better yet - how can I make a movie on the timeline completely and change it later as a separate film. I have really four shorts - a minute long. I would like to change separately, with a new file name. I don't know how to do that more.

  Tommyvincent

  I did some research on the issues that you have raised in this thread.

  Comments...

  1.

  After you import a video into the assets of the project, you can right click it, select Rename. This file when you drag the timeline will have the new name.

  But...

  If you import a video into the assets of the project, drag it to the timeline, right-click clip timeline, select Rename from the pop-up, then the calendar file will be renamed but not its thumbnail in the active project. You rename this project asset vignette to match if you want. However, these traces yet files renamed to the original with original filename to its disk hard saving location.

  2.

  All down your Timeline... one way would be to export the clip selectively if she was included in the Group of the clips on the Timeline. Two conditions for

  a. change box, set the gray tabs on the work area bar to expand on the segment to export

  and

  (b) in the field of export, have a check mark next to the option "Action work area Bar only.

  3.

  If you have made a clip in the active project, double clicked to open the preview window, you can cut the clip with the points put in and Set Out and create "subitems" with new names in the active project. These "subitems" would be part of the media of this project which could be moved to the timeline when necessary.

  Please review and determine if all the foregoing is in the right direction for what you want to do.

  Thank you.

  RTA

• Return of the mistake of MUSE: why do we not have several files with the same name?

  Well - I thought I had all this worked and fixed, but I met the download error 'Why do we have several files with the same name' once again.  (I downloaded all the files several times today in order to 1) works the way it worked the last time and 2) get an OAM file that is not loading for some reason any load again and the download takes about an hour to transfer all the files manually.

  To recap:

  (1) an option "Upload only modified files" returns the 'Muse has encountered an error and closes.  Why do we have several files with the same name? "error just as before.

  (2) a full download will work but takes forever and is NOT a substitution for work changed files option.

  Please advise with possible solutions!

  -Dave

  Is it possible to have two .oam different files in different folders on your computer where the .oam files have the same name? I'm theorizing that there may be a bug in the treatment to ensure the folder created for a .oam placed on the server receives a unique name, particularly in the case of a partial update of the site on the server.

  Please send us the .muse file and all the files in .oam related to [email protected] along with a link to this topic for the context so we can attempt to reproduce this error and isolate the root cause. If files are larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing. Thank you.

• I can't save a PDF with the same name

  I can't save pdf files with the same name on the network drive in our society. I have full control over this network drive and can do anything create/read/write/change. Other programs work fine, but not Adobe Reader. I can save a pdf file with a different name, but when I try to save as in XI or replace as in DC had an error: the file is read-only or opened by someone else. Save the document under a different name or in a different folder.

  By the way, Acrobat Pro, I got the same message.

  

  Hi igorp74028164,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after crossing "" help > check updates "»

  Follow this thread to reset the preferences for the acrobat software. : - How to reset preference settings in Acrobat format.

  Also please check if this file is saved to the network drive or local, if its network on Please save it on local disk & then check. Make sure also that this preview pane must be closed in windows Explorer.

  Kind regards

  Christian

• I want to move virtual machines to a folder called Linux name, but we have several file of the same name in our Datacenter, please give me PowerCLI Script to move exactly

  I want to move virtual machines to a folder called Linux name, but we have several file of the same name in our Datacenter, please give me PowerCLI Script to move exactly.

  I tried to use for the function FolderByPath below, but don't know how to use it and have worked. Please help me in this.

  Function Get-FolderByPath {}

  < #.

  . Records of recovery SYNOPSIS by giving a path

  . DESCRIPTION the function will retrieve a record by its

  path. The path can contain any type of leave (folder or)

  Data Center).

  . Author NOTES: Luc relaxing

  . Path PARAMETER

  The path to the folder.

  This is a required parameter.

  . Path PARAMETER

  The path to the folder.

  This is a required parameter.

  . PARAMETER separator

  The character used to separate the leaves in the

  path. The default value is ' / '.

  . EXAMPLE OF

  PS > Get-FolderByPath-path ' Datacenter/Folder1/Folder2 ".

  . EXAMPLE OF

  PS > Get-FolderByPath-path "Folder1 > Folder2"-separator ' > '

  # >

  (param

  [CmdletBinding()]

  [parameter (Mandatory = $true)]

  [System.String []] ${Path}.

  [tank] ${delimiter} = ' / '.

  )

  {in process

  If (((Get-PowerCLIConfiguration).)) DefaultVIServerMode - eq "Multiple") {}

  $vcs = $defaultVIServers

  }

  else {}

  $vcs = $defaultVIServers [0]

  }

  {foreach ($vc to $vcs)

  {foreach ($strPath in $Path)

  $root = get-file-name of the server data $vc centers

  $strPath.Split ($Separator) | %{

  $root = get-inventory-name $_-location $root - server $vc - NoRecursion

  If ((Get-stocks-localisation $root-NoRecursion |)) Select--ExpandProperty name)-contains "vm") {}

  $root = get-inventory-name "vm" - location $root - server $vc - NoRecursion

  }

  }

  $root | where {$_-is [VMware.VimAutomation.ViCore.Impl.V1.Inventory.FolderImpl]}|% {}}

  Get-file-name $_. Name - location $root. Parent - Server $vc

  }

  }

  }

  }

  }

  You can try to retrieve the object file by steps as well.

  Something like this for example

  $folder = get-data center-name 'LTX01-G8 | Get-file-name "LTX-servers | Get-file-name "LTX servers 0000 - 0299. Get-file-name Linux

  I guess the first qualification in your path was the data center.

• I have 2 bookmarks with the same name but different stuff in them. I want to remove one, but pass the contemts remaining bookmark

  I have 2 bookmarks with the same name but different stuff in them. I want to remove one, but pass the contemts remaining bookmark

  This is the first mention you made records. See this - https://support.mozilla.org/en-US/kb/Sorting%20bookmarks#w_rearranging-manually - and move individual bookmarks from one folder to the other folder. You may need to press the Alt key to display the Menu bar and the View menu item.

• How to have two copies of the same program to install on WIndows 7 and on the desktop

  «"" "Dear help forum:»»"»

  I am new to WIndows 7, but just have not found the right research
  How to get my answer from Microsoft/Windows 7 basic knowledge.

  I have two programs. There are two versions of the same program
  ('LACE') One is the version 4.0.1, and the other is Version 4.0.6.

  I wish I had one old continue to run (using a purchased
  Product key which I own and have for years).

  BUT there is a problem. The old and new programs are the
  same 'setup.exe '? Download 124 MB each. There are small but
  many corrections and changes in the new program, I am told, but
  they do not have add up to change the size in MB of the program.

  SO I'm in trouble when I'm trying to download the program, as
  It seems to be in WIndows 7, a small program that removes the
  size of the incoming download and informed me that I can not download
  a new that I have already one of this program is installed in the
  computer!

  He asks me if I want to "Uninstall" the previous version and then replace
  It is with a new one. I can't cancel the old version because she had a
  Product key that was told to me in the instructions that he could
  only be used 'once', to uninstall the program won't help
  me as I won't be able to continue to use this program once again, as the
  registration code could only be used once.

  I have a purchased code new, different program version 4.0.6.

  Is this a problem with WIndows 7? I already called/sent the
  company and they have no help and no solution for how these two programs
  are to run on the same computer at the same time.

  Can you please help me and provide instructions on how I load
  This program of "LACE" most recent second size 124 MB and even download
  name in the computer (replacing the automated duplicate program
  prevention installer routine), so I can have and use two copies of
  This program on the computer at the same time?

  During the creation of this issue, I had an idea of what will happen if I created a
  second Downloaded Programs folder to contain the program setup.exe inside
  and try the operation or the opening of this place. He did not like
  the program checked the computer for the first copies of the
  LACE and identified, he was always present in the computer and asked
  Once again if I wanted to remove it.

  Thank you very much!

  If this program is not designed for the execution of the two copies on a single installation of Windows, then you simply can't do.  No ifs, ANDS or goals.  You have never been able to do with any version of Windows, and apparently the creators of this program thinks there is no reason to do so, then you'll just have to choose one version or another.  I'm not familiar with the lace, but more recent versions programs usually include most of the older features while adding the most recent.  They sometimes make us learn new ways of doing things that make us less happy, but I'm afraid that's life in the world of computing.

  That said, I must mention that there may be alternatives that you might continue even if they are less obvious than what you suggested.  If you have the professional version or full edition of Windows, you can get XP mode free you can start Windows 7.  It normally happens in 15 to 30 seconds and you could install and run another version of your program under that.  If you do not either of these versions, you can invest in the Anytime Upgrade and do it available.  Upgrade Home Premium to professional is $ 90.

  The other alternative would be a dual-boot configuration where you could have two versions of Windows in separate partitions, so when you start your computer, you can select the one with the version of your program you want.  I think that the choice of the XP mode would be preferable because it would be so much easier to use, but these two options are available, if you want to continue.

  Good luck.

• Can I have several structures with the same case of event event?

  Hello

  I do an application which reproduces the front of the power supply HP6675A. To do this, I did a machine to States with different States

  (initialize, measures, voltage, current, ocp, ov, store, recall, etc.). In each State, should have a structure of the event that attracts the events of the buttons, as for example: If the current state is the voltage mode and the current button is pressed the next State will be the current mode. For this purpose in each State of the state machine should be the same structure of event with the same events.

  My problem is that the Vi does not work properly when I have several structures with the same case of event event. There are some possibly to do and how? Or is impossible to have several events? I read a few posts, but I can't find solutions.

  Any help is appreciated.

  Thank you very much.

  In general, you should have 1 structure of the event in your VI.  In your state machine, the structure of the event should be in "pending" status  So you will probably start in the State of the initialization and then spend idling.  Then, the user presses the present button.  If your state machine should then, go to the current state and then return to Idle.