can I interface a third-party hardware with labview using rs232c

Similar Questions

• Tips using a third-party host with Muse

  One of my clients pay for their own accommodation with a third party. I created a site for them using Muse. I understand I can load on their third-party host through Muse or export to a folder. I'd rather do the latter and wash my hands of the project and let them deal with him. It was a heavy releationship.

  I watched the tutorial on export to a folder (that I hoped then dropbox to the client) but Muse keeps asking me for a domain, site map SEO and typekit, that occur in the tutorial, I looked. How to get around this? I don't have any idea what area they will use, it might even be a page in a current site, I'm not even sure that the client knows (they have someone who takes care of it). Currently the site is online on the BC using the. businesscatalyst.com address it is naturally affected.

  Am I also right in thinking that they will be unable to edit the site, they will use obviously is not BC dashboard, could someone change the HTML well?

  Thank you

  Penny

  Hi Penny

  You can use any domain you want to save the site in HTML format, it is just a reference to the name of the site while saving the site uses what Muse.

  That doesn't effect the upload process that your client will do at their end by transferring the content to the external server.

  They plan to publish the Business Catalyst site, if yes then you can directly load the site from your end to their account.

  And if they use external server, then they can use in the browser edition at the present stage.

  Please let me know if you have more questions, of if you have a paid subscription, you can check out our beta program.

  Thank you

  Sanjit

• Three questions.  The heart rate monitor now plays nice with the third-party applications?  Can you run these third-party applications, without the link to your phone?  How much storage?

  My experience with the original watch is that the heartbeat was working fine with apps in the House but does not work well with third-party applications.  Aboriginal health applications were sub par at best.  In addition, he wouldn't these third party apps (Strava), unless you were related to your phone.  A new doesn't do me much good if it is always the case.  Finally, it's great that you can bind your helmet now but what storage is the watch have?  I am not unrealistic, its understandable if its not much, but I hope that it is enough that a few apps and music enough to pass through a 4 hour tour.

  1 WatchOS3 made major changes in this area, and 3rd party applications get access to things like HR. OS3 also makes everything much more receptive. 3rd party applications will need to be updated to play with the HR monitor.

  2. you can run applications 3rd party without the phone with you, but for your type of application, you'll want a series 2 with GPS watch. The likes of Runkeeper OK working in the older shows, but without GPS, they do not really work you need. New - 3rd third party apps will need updates to work with the GPS watch. OS3 software has been available to developers for a while now, so I expect software updates only very quickly. I don't know if or when 3rd parties had access to the equipment and GPS devices, s, then it may be some while before they have series 2 updates.

  3. you can store 2 GB of music. How much music that is depends of course format and quality, but certainly several hours.

  Hope that helps

• Monitors high-resolution produce unreadably small fonts in software from third-party manufacturers with Windows 7 Professional.

  Operating system
  Windows 7 Professional 64-bit SP1
  CENTRAL PROCESSING UNIT
  Intel Xeon E3 1226 v3 3.30 GHz 33 ° C
  Technology 22nm Haswell-WS
  RAM
  16.0 GB Single-Channel DDR3 @ 798 MHz (11-11-11-28)
  Motherboard
  LENOVO SHARKBAY (SOCKET 0) 28 ° C
  Graphics
  LEN E2323swA (1920x1080@60Hz)
  LEN E2323swA (1920x1080@60Hz)
  2047 MB NVIDIA Quadro K620 (NVIDIA) 40 ° C
  Storage
  931GB Western Digital WDC WD10EZEX-08M2NA0 SCSI Disk Device (SATA) 34 ° C
  931GB TOSHIBA external USB 3.0 Flash DRIVE (USB (SATA)) 33 ° C
  29GB SanDisk Cruzer Glide peripheral USB (USB)
  Optical drives
  HL-DT-ST DVD-RAM GHC0N SCSI CdRom Device
  Audio
  Realtek High Definition Audio

  The default resolution and "recommended" for my two monitors lenovo is 1920 x 1080. I have a new system and I tried for a few weeks now to something to work with screen resolution and third-party apps. I am under W7 Pro right now, but will soon be getting to 10.

  The high resolution is not a problem in 7 with any Microsoft stuff. With the help of a custom of the DPI setting takes care of all the native stuff. Some third-party applications can be set as well. For example, Corel Photo Paint X 7 has bars of detachable command with command icons that can be set to small, medium or large. When the size of the icon is changed, the size of the font adjusts accordingly and it is perfectly feasible, acknowledging the icons or by reading the text. It is perfect for this dual screen system and works like a charm.

  However, most of other software companies are not quite as respectful of their clients. Bryce, formerly owned by Corel, but now DAZ despicable, is not removable toolbars and there is no options available to adjust the sizes of icons in order. Even if preferences to provide an engaging, multiple monitor option not to release the toolbars or increase the font size. It only opens the Bryce "Labs" in the second monitor in a position at the end of the dialog box, half of the Cup.

  It also applies even in a top of the range of applications such as VIEW and Smith Micro, Poser Pro. They present menus and toolbar icons that are so tiny, it is necessary to use the Magnifier Microsoft to make and which isn't real solution when your work with graphics programs. It's incredibly awkward.

  My old system, running XP Pro, SP3, which I always put in place and operational, has a screen resolution of 1280 X 768, and it displays all the software of third party very well. If I try to use this resolution with W7 and these monitors high resolution, I get a crushed image down and half on the screen which is useless. I can read everything very well, but all images are short and fat! If it was possible to type values for the height and width, using an infinite scale rather than the fixed scale that is provided by the slider over, nicked in W7, it would be possible to find a combination that worked. Then, once the wreck was set for third party stuff, the custom DPI settings Windows could take care of the native stuff.

  I had an Oracle VirtualBox running for awhile and loaded the third of things out there and it worked for awhile but it did not offer the ability double screen and, in any case, after awhile it started to get really uptight and I finally just had to get rid of.

  Really, I would be much happier if I could just load XP Pro on this machine and do run as quickly as things that made to run on it. The only reason why I got a new system was the need for more speed and muscle. But if I can't use my favorite, applications worth it?

  Is there no workaround solution that will make it possible to adjust the resolution so that the third-party applications are fully functional using all the space on the screen?

  Thank you to everyone who takes the time to read and respond.

  Since no one answered I'll provide the solution myself. Doing right thing 'upgrade' to Windows 10 has this problem of resolution.

  Other than that, getting W10 to work even at halfway was a nightmare.

• Right third-party services with secure LDAP connection?

  Hello

  We work with the company DPSuite in my company for 3 years now by the creation and distribution of fact sheets to our sales teams.

  Different teams use different applications for different folios.

  We would like to take this experience can feel next level to be able to use our credentials Active Directory as you connect with a single application. Then be able to share folios, depending on what a user of Group belong etc...

  We have played with a right external server, we have in place, but the limitation is obvious that you need to create a username/password for each user (a plus password to remember!)

  You know any third-party service put these tools?

  Thanks in advance!

  Direct payment of the entire solution can do: set - consultant.

  Neil

• Will you be able to dissconect from third-party sites with download of "add-on"?

  I like the idea. Is their a way to delete the third-party connections after their identification? For example, third-party cookies. As soon as I know that the site has a third party, can I delete the primary cookie and the cookie party or they are hidden?

  Hello aden0102, lightbeam is above all an educational tool to view the amount of common and content of third party trackers. the only option to improve actively your privacy within the extension is to block the browser to make connections to the monitoring servers you can set...

  https://www.Mozilla.org/LightBeam/

• Control a third-party hardware

  I'm new to LabVIEW instrument control.

  Here, my duty is to control a DC motor servo using lab VIEW. It's C - 863.11 mercury.

  I enclose the catalouge with this question.

  Please guide me through the first steps to controllling this controller.

  Thanks in advance

  Most important: RTFM!

  You need at least a basic understanding of this material, what it does, how it is done, how to set parameters...

  The documentation will tell you how to do it.

  This unit has a RS232 and USB connection. USB is perhaps just a RS232 (so if you plug it into your PC, you will see a COM port, or you need to install additional drivers of PI. You need to know.

  Then, take a look at the network of pilot OR ask PI, web search, maybe a driver for LabVIEW already exist. (But you should know 1. What do I do? and 2. The pilot how can?)

  A simple departure (after reading the manual on how to control the unit!): connect the RS232 interface and start with the simple to write VISA read example (LabVIEW uses it's pilot on VISAS screws to connect the RS232 interface). You need to set the sertain parameters (such as the flow rate in baud, data bits,...), but the PI manual will tell you...

• How can I allow 3rd third-party products

  I want to include a few 3rd party features on my site of BC. Each requires a user to connect, if I already have my visitor connected to a secure area, how can I pass on that permission on the 3rd third-party modules so my visitors must identify separately in British Colombia and the 3rd third-party modules.

  You will not be able to intercept the and enter the username and password on login BC forms and pass it anywhere if you plan to use the remember me function (because the user password is already chopped in the cookie, or a token ID).

  So my advice / suggestion to help your question would be:

  -Create a staging server.

  -After user names in, via JSONP or querystring on the secure page send the entityID to the server of the middle man.

  -L' the middle man then uses the BC API to check if the ID of the entity is in fact really connected and authorized through Contact_IsLoggedIn

  https://worldsecuresystems.com/catalystwebservice/catalystcrmwebservice.asmx?op=Contact_Is LoggedIn

  S ' they are connected use the example in the link you provided for the SSO

  Official Single Sign-On for speech - speech Meta

  For the App42, it seems that it doesn't have a single sign in method?

• Alerts are have passed to the third-party tool with a some minutes along 2 late

  Hello

  I use this script to pass the Foglight alerts to a third-party tool:

  ServiceAlarms = #! FSMCategory: name = 'Test' # .topologyObjects [0] .aggregateAlarms

  found = ServiceAlarms.find {a-> a.alarmId == @event.get ("alarmID") ;}}

  If (found & @event.get ("severityLevel") > = 3 &)
  (@event.get("change/value") == 0) {}

  Returns true
  }

  This works successfully to transmit alerts for servers in the "Test" group and also as critical and fatal events without transmitting the events of compensation as it did before.

  But now the problem is that alert is get passed after about 2 minutes of being trigger who should not happpen and we want to get alerts immediately transmitted on fires.

  Help, please.

  Yes I use the script in the Condition of the rule.

  

  

• Where to install third-party drivers for LabVIEW

  Hi, I have not used LabVIEW in several years.

  I downloaded many third party drivers and saved locally on my C:\.

  Where should I move these .lib files so that I can use their throught it works Palette?

  Is there a certain structure should I use when registering these?

  Also, what is the difference between user.lib & instr.lib files?

  I tried to find the folder as shown in the following tread but I can't seem to find the file:

  How to install my third-party instrument Drivers?

  It is what the recommended action:

  

  Can anyone help?

  Kind regards

  Seamus

  InStr.lib is for instrument drivers.  User.lib is your own private libraries.

  I'm guessing that you are on a 64 bit OS.  So you should look in C:\Program Files (x 86) \National Instruments\LabVIEW (20XX) \instr.lib

• advice on the follow-up to the elderly with third party hardware/software?

  Ok. advance apologies if this isn't the right forum for this but apple seems to come with great new tools very frequently and app users tend to be quite sophisticated. Anyway, here goes:

  is it good hardware or software to track an elderly parent that needs to be followed for their safety? I mean, assuming that they give permission or assuming that they are beyond the point where they can give the permission is there such thing as a small bracelet that let me do this using my iphone and a kind of software?

  find my iphone seems like it does something similar, but that's assuming that the phone battery is not dead, and assuming that they take on the phone with them which are the two major assumptions.

  I just saw there was a framework for friends and family on icloud.com but nobody knows how it works? can I turn on his phone and have access to the place where it is if her phone is with him, and when its battery is turned on?

  LG made a device called a Gadget of Gizmo (adult version of their Pal Gizmo). It looks like a smart watch. But it is basically a stripped down the phone (so you would need a cell plan). There is an application to track the user. Not an Apple product, but it gets good reviews.

• Can I use third-party widget with Muse, as those of Code Canyon?

  I have not yet tried a Muse, but I'm curious. I used Dreamweaver for many years, but the idea of an app works more as my most comfortable Adobe design programs is very encouraging. However, I'm not sure how so many features I would have. I often use elements of Code Canyon, such as cursors and menus with special functions. Is it possible to use it with the Muse? I am about to launch a new site, and I'm trying o weigh my options.

  Hello SasserCreative,

  In muse, you get an option to enter the external HTML codes of object > insert HTML code but you may need to customize codes in some cases.

  You can also use the widget provided by Code Canyon http://codecanyon.net/category/plugins/muse-widgets.

  There is a muse online widgets library so that you can use to accomplish different things in the muse.

  Adobe Muse Widget Directory

  Kind regards

  Vivek

• How to use references from web third party service with service Cloud Computing to Oracle database schema

  APEX 5.0

  Cloud Computing service for the Oracle database schema

  
  

  I'm in the middle of do a proof of concept.  Basically, I need an application with security of the stored data, UI, user, data loading, and able to post data via an external web service said.  It seems that with the database schema Oracle cloud service, it is not possible to use web service references that are not in the field.

  If I try to use a service via http reference, I get:

  ORA-20987: APEX - the requested URL was forbidden. Contact your administrator. -Contact your administrator of the application.

  If I try to use the same reference service via https, I get:

  ORA-29273: HTTP request failed

  ORA-06512: at & quot; SYS. UTL_HTTP & quot; line 1130

  ORA-29259: end-of-input reached

  I read somewhere that cloud services only https can be used.  Is this true?

  And then I read somewhere to use the protocol https, the portfolio must be configured to store certificates, etc.  However, I read somewhere else that the portfolio cannot be configured because there is no access to the instance database with the Oracle Cloud Computing database schema service.  Is this true?

  If both are true, how can I make a call to post data to an external web service?  Or do I need to use a different Cloud Computing service?  Or do I need my own instance of Oracle DB?

  Any help would be great.  Thank you!

  It turns out there was a problem with the remote rest service.  After successfully calling a rest service that was created using SQL Workshop, I tried different remote rest services and they all work.  Sorry for the confusion.  I thought it was very strange that the schema of database service wouldn't be able to do it easily.

• Anyone can vouch for some third-party widgets?

  Not happy with slide show in muse cc options, so started looking in widgets. Found a few really smart of QooQee, however, they do not respond by email/support queries and read on their own community forum someone had problems with payment taken and not being able to download, so this put me off. More circumspect on the reviews they have 3 clients written entirely on the same date? and very similar writing. They write their own? I asked for advice on their products (those who should I choose and questions about them), didn't have an answer, which was minimal when emailing again and still nothing so I expressed my concerns and received a very confused email back from them. Does anyone here use them? Are they are not reliable? Too bad that some of the things is superb.

  However, how know its official and regulated by adobe?

  Need a decent widget that supports HD images-slideshows/lightbox, adjustable thumbnail layout / portfolio, etc and is highly customizable with options menu good navigation... reactive and resizable without stretching your images, proving difficult!

  I have not personally used Qooqee or Muse-themes widgets but I personally met the Ali and Steve. Unsure of their support as I've never had to use it, but as a provider, they are great guys who create great widgets. I do not know the support and things to MuseGrid and 123Muse are excellent even if, as I speak for them (ladies and gentlemen) on a regular basis. I have no concerns about the use of widgets to one of these four suppliers.

• Looking for programmable hardware with labview

  We are fairly new to labview.  We intend to move to labview for many of our control systems, we develop and use the PC Panel. We still have many applications that we use a traditional controller, and these do not require a graphical interface of any kind.  We still want to find a solution to switch completely to labview but I'm having a hard time finding a solution of low cost hardware to run a labview program.  Someone at - it good ideas?  Thanks in advance