can I use an installation cd with separate key codes?
One of my friends got his stolen cds of XP operations, but she still has the code key package. Now we need to reinstall the xp operating system, can I use my cd of xp with its key code?
This is a forum for office, but given that the answer is short and simple, I believe that nobody will mind if we make an exception.
If your installation disc is in Siena, no problem. You must match the edition (home to home, Pro to Pro, Media Center, Media Center, etc.),and that you need to match the type of license (full retail full retail or upgrade of retail to upgrade of retail or OEM to OEM).
Service Pack level is more important when you use a product key XP Pro SP3...
Tags: Windows
Similar Questions
-
I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?
My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.
Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?
Thank you
Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you. I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!). Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.
If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.
I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!
Thank you much for the help...
Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.
Thank you
@Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!
-
Can I use your Apple TV with MacBook Air
I use a MacBook Air, 13-inch, mid 2013, OS X El Capitan 10.11.6. I am interested in Apple TV. With this product I was able to connect my Epson EB - S18 projector to my Mac in order to project movies that I bought on iTunes on my wall of the apartment? Would be there is always a problem to play these movies 'protected' outside the computer itself? Must they be downloaded in SD and not HD? Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port? Can I use a patch to connect the VGA cable to the port on the computer to the projector? Please notify.
Thank you very much.
Can I use your Apple TV with MacBook Air
Yes! AirPlay with an AppleTV is the easiest to use and less complicated solution.
SD / HD makes no difference.
You will only be able to enjoy the full quality of an HD movie with a better projector however. This model projector is not really intended for presentation of home theater. It will work well. As you can imagine that there is no upper limit on the amount, you can overlook these things, but $2000 is going to buy a nice home theater projector these days. A few years ago, you would need to spend $ 50,000 or more.
Would be there is always a problem to play these movies 'protected' outside the computer itself?
No, not if you bought (or leased) from iTunes. They have to play on any device compatible iTunes. You can even use AirPlay to distribute it to your AppleTV from an iPhone.
Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port?
Yes.
Can I use a patch to connect the VGA cable to the port on the computer to the projector?
Not without a converter. Avoid using the VGA if possible. It's a terribly outdated and generally horrible alternative to any digital standard. Since your MBA has a port Thunderbolt, and if your projector has a HDMI input, buy a cheap (± $10) Thunderbolt to HDMI adapter cable. But AirPlay is preferable to a wired connection.
-
A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?
Yes.
http://www.Apple.com/Mac-mini/specs/
the voltage may vary from 100-240 V AC.
-
Can I use data value references with a functional overall?
Can I use data value references with a functional global? I am trying, but it causes problems: I run the attached VI with "new DVR" selected. Then I run it again with "return array" and I get the error 1556: "The reference is invalid. This error might occur because the reference has been deleted." It seems to have forgotten the DVR, but I thought it should be stored in the shift register. Another odd thing: In my VI, if I try to connect the wire shown in "something strange", then the type changes (from U16 array to DBL), i.e. it doesn't recognize the type referenced by the DVR. I want to pass a very large 4-dimensional array between parallel loops with a functional global. To avoid memory problems, I want to use a DVR and in-place element structures. If that's not allowed in Labview, I will try passing it through a user event or notifier. Any problems with those alternatives? Thanks.
I received a response from an engineer applications OR on this subject, and it seems that it is perhaps a problem with Labview. They are working on it, so I'll go ahead and close this discussion.
Thanks for the help,
Allan
-
Can I use internet in Holland with a rt surface that I bought at the Portugal?
Can I use internet in Holland with a rt surface that I bought at the Portugal?
From Internet Explorer
Original title: rt of surface
Hi pmeulendijks,
The answer is Yes. It depends on your networks.Thank you
-
Can I use VMware vSphere Hypervisor™ with vSphere Client?
It's the question next poped upward.
-Can I freely use for my business need VMware vSphere Hypervisor™, and what will be the difference with VMware vSphere Starter Kit?
and
-Can I use VMware vSphere Hypervisor™ with vSphere Client software for free?
Yes - it is freely permitted, but he he has limits and lack of features compared to the vSphere Essentials kits. Another thing to note is the absence of vCenter Server to manage multiple ESXi hypervisors with the free version. The backup API are, in my opinion, one of the main obstacles to the use of this.
-
Can I use LEAD or TROLLING with groups?
Can I use LEAD or TROLLING with groups?
I want to compare two records in each group.
Is this possible?
Thanks in advanceXavi says:
Can I use LEAD or TROLLING with groups?
I want to compare two records in each group.What do you mean by groups?
Twinkle
-
HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)
Hello
Please do not type in capital letters because it's difficult to read and considered to be shouting.
---------------------------------------------------------------------------------------------------
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
The system has RAID? If so, it's also very suspicious.
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E which is also 0x1000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
interpret, you must identify which exception has been generated.Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
the Microsoft Windows Driver Kit (WDK).Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Make sure all new hardware that is installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">-->
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-----------------------------------------------------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
http://www.NirSoft.NET/utils/blue_screen_view.html
death ' crashes and displays information about all accidents of a table.
FreeBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I own CS5 with discs & Key Codes, but my new PC does not have a DVD, how can I download the software?
Hello
You can download it from
-
Can I use several nulls in a unique key column
Happy Pongal (SANKRANTHI) friends hi... Can you please help me in this regard...
Can I use several nulls in a unique key column?Yes you can have
-
I suspect I already know the answer to this question:
I have an PXI-6224 M-series data acquisition card and a terminal of the SCB-68 block and want to take action using a bunch of 4-wire RTD. Is the power to the power source for these measures 6224, or is - not possible with the hardware I have?
I know that NEITHER you propose other solutions to my problem: I am interested to know if I can do these measures with the device that I currently have on site.
Thank you!
Hello Jeffrey,.
You have two options here, but it doesn't look like you need some hardware.
The SMU-4357 built conditioning of signals, but it will not work on the chassis curent you have:
http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/210596/
We also have an option with the NI 9217 cDAQ, but once, it gets you into a different platform:
http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/208804
We used to have an option that we sell no more - the SC-2042RTD. If you are lucky and have one of them on hand so here's some info:
http://digital.NI.com/public.nsf/allkb/4FF2C0F8D11B99B486256F4C006DCEA0
You can also use these two elements in conjunction with eachother with your current PXI card:
http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/12311
http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/10778
Finally, you could get an SCXI chassis and drop them in:
http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/201609
Thank you
Joel C
Technical sales engineer
National Instruments
-
Original title: Windows Installer does not
I use a laptop Windows Vista Home Basic 32-bit, and whenever I try to use a Windows Installer Package (.msi file) it gives me this message: "the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. "Because Windows Installer does not work, I can't update anything, including Windows itself. Windows Installer used to work perfectly, I got this computer for awhile. I tried /unreg msiexec/RegServer andmsiexec, none of them worked for me. If anyone can help me, please respond.
Kind regardsRobinHello
I suggest you to go through the procedure described in the link by spirit X who speaks of a similar problem.
Warning: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.
-
Can I use any mSata SSD with ExpressCache?
Hello
I'm buying a X230i and I want to increase the performance with a SSD cache drive, as I have on my desk.
I've been watching this disc; Kingston SSDNow v + 30 GB mS200 (http://www.kingston.com/en/ssd/s#sms200s3), that seems advantageous, that need to be or I might as well buy an SSD 'normal '...
But it'll work in a X230i and I can use the ExpressCache software with it?
Best regards
Morten
Hello
I do not have a X230i, but I have a 220 X, and I successfully running Windows 7 and Windows an mSATA 120 GB SSD and Windows 8.0 8.0 and 8.1 of a 240 GB inside mSATA. So I think that these drives would work in the most recent series of X230i thus, as long as it wasn't anything physically blocking a mSATA card installation.
Kind regards
Aryeh Goretsky
-
How does the OEM? Can I use an OEM disc with a product key, I already have?
So I just bought a laptop preloaded with Windows 7 32 bit. I would like to install clean with win7 64-bit, but I don't have an installation disc and I can't find one online that is not cracked which leads me to the conclusion to go out and buy the thing. So the question is: if I'm going out and buying an OEM version, can I use it to clean install, using my previous product code provided with my laptop? Or is the OEM software and key, it comes with a part of the binding process which binds to a machine? Any info would be much appreciated. ~ Vince
If you buy the exact same OEM version as your current license (Windows 7 Home Premium - Windows 7 Home Premium) it will work.
If you have difficulties to activate Windows 7 open the Windows Activation Wizard in Windows 7 to use the phone and activate Windows:
During the Windows 7 installation at the entrance of your product keys page, do not enter your key and uncheck the "automatically activate when online.
1. When you reach the desktop, click Start, then in the search box type: slui.exe 4
2. press enter on your keyboard
3. Select your country.
4. Select the option to activate the phone, then call and hold to a real person.Difference between a full license and an OEM license
Windows OEM licenses:
are related to the first computer installed on and are non-transferable
cannot make a room upgrade from older versions of Windows
do not offer any free support from Microsoft
allow the hardware upgrades of all components except for the motherboard (unless, of course, because the card mother original becomes defective)Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses
Maybe you are looking for
-
Audio skipping on the Satellite L350
I have problems with the audio on my Satellite L350. I bought it in February & for the first two months, I had no problem, but more recently I've been doing audio stuttering/vibrations/jump on my laptop.It always happens to intervals of 5 minutes for
-
How to highlight a cell IR report based on a value in another column?
I used the code below and the cell is highlighted for all use column formatting css #COLTOHIGHLIGHT #add to pageBut what I need is if the HIDDENCOL is 'OUT' value and Custom2 should apply if the HIDDENCOL has value 'IN' then custom1 should apply. How
-
I had to uninstall CC app. Now, it will not re - install.
I uninstalled the app CC as shown because of download problems and activation, I had when I tried to update the applications, now when I try to reinstall I get to the window "Download creative cloud desktop application" and the blue bar gets 10% of t
-
JynI'm having a deliverance for a line, I need to convert it to as3 but idk how to do :/There is the line to be converted:If (MovieClip (root) .flagSound){This.random_RO.gotoAndStop (randomly (this.random_RO._totalframes - 1) + 2);}And he said:"Call
-
Flash player crashed, all the time now
I constantly get a message that flash player crashed into firefox.I just got a popup with the following:Signature of the problem:Problem event name: BEXApplication name: FlashPlayerPlugin_16_0_0_296.exeApplication version: 16.0.0.296Application times