Can I use a PXI-6224 with the SCB-68 to take the measurements of 4-wire RTD, or do I need a power supply separate?

Similar Questions

• Can I use an SD card with the new MacBook?

  Looking to buy a new MacBook. From what I can tell there is no SD card reader.  I don't see any accessory adapter for SD readers either.  Is it possible to use an SD card with the new MacBook?  Thank you!

  Only I can find is for iOS devices > > http://www.apple.com/shop/product/MJYT2AM/A/lightning-to-sd-card-camera-reader?f node = 91

  On the SDXC - Apple Support and SD card slot

  I hope someone will find an adapter for you.

• can I create custom context menus? Can I use Push technology? With the browser?

  Anyone know if I can create custom context menus? Also, can I use Push technology? I vibrate the device? With the browser?

  Just try to clarify to make sure I understood the question.  The browser does not support the menu adding items to the BlackBerry menu (I don't know how tell - the menu that is displayed when you press the menu key on the BlackBerry). Java applications are.  You could build something in JavaScript (on 4.6 and later) who gave you menus, but it does not fire when the menu button has been pushed.

• DROID: Can you use any mic usb with the brick to charge?

  Sorry, it's maybe a stupid question, I'm generally pretty good with computers and technology, but I don't want to take any chances with an amazing new piece of equiptment.  I got an LG dare before the droid and the dare had a much longer charging cable and was also micro usb.  The usb cable said LG on it, like the motorola droid, said.  Can I use cable of the Dare with the droid as long as I plug it into the power droids brick?  Thank you

  I bought one yesterday long Radio Shack so that I could use the cable stock for a connection point permanent for my office. It works very well.

• Can we use type multiset and with the clause the two

  Please let me know how to use the multiset type and with the clause.

  You need more inlining, as for example in:

  SQL> select *
  from table (cast (multiset (select *
                              from (with t as (select deptno from dept)
                                    select * from t)) as sys.dbms_debug_vc2coll))
  /
  COLUMN_VALUE
  ----------------------------------------
  10
  20
  30
  40
  50                                      
  
  5 rows selected.
  

• Can I use my MacBook Pro with the Display 27 "Thunderbolt

  My MacMini seems to have thrown a crisis of anger with El Capitan and I need to continue my work with my 2.4 Ghz Intel Core duo MacBook Pro (2008).  I see that I can connect the two wires into the side of my MBP but an empty black screen seems to dominate with no sign of life at all.  It is likely to please?

  TBD will only work if you have TB port on your laptop.  Your laptop probably has a mini port that looks the same, but differs based on display.

• Can I use internet in Holland with a rt surface that I bought at the Portugal?

  Can I use internet in Holland with a rt surface that I bought at the Portugal?

  From Internet Explorer

  Original title: rt of surface

  Hi pmeulendijks,
  The answer is Yes. It depends on your networks.

  Thank you

• Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?

  Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?  How about studio flashes (Alien Bees)? I just sold my Canon gear and moved to Sony, but I need advice on how to trigger wireless flashes.  Thanks for any help you can provide.

  Larry

  LarryMarshall, Any Trigger of manual Radio should work.  Assistants of pocket or RadioPoppers.

  But there are a few problems with the 60 m.

  (1) it doesn't have a PC or a 1/8 port to connect directly to a Rec Radio of any brand.

  (2) you WILL NEED to buy or use a hot shoe with a PORT adapter... 1/8 according to the sync cable or PC you may already own.

  (3) you WILL NEED to 'Check' to 'ensure' that trigger the 60 m SHAFT is aligned with the center of contact your hotshoe adapter hot with a PORT... because some adapters won't online upward with the 60 m Flash... who fooled you into believing that it does not work.  When, in fact, it's just the PIN which is not aligning with ALL the hot shoe adapters.

  It will work... you just have to be careful... and know of the gatcha.

  The 60 m PUT claw is not fully compatible with all... hot shoe adapters and there that to do with how PUT 60 m flash foot aligns the trigger ROD.

  I triggered the 60 m in flash with RadioPoppers... in the manual... so, I know it works.

  It is, manual release of the waste of the 60 m flash TTL/HSS abilitys.    What is needed is for SONY to develop and deliver a Radio trigger Solution.  Which would be TTL/HSS and you allow to 'Control' the Flash too... from the camera.

  It is the power of a Flash of modern Radio System.

  Manual triggers are old school.

  p.s. the A7r/A7 can easily trigger flashes of Studio with Pocket Wizzards or RadioPoppers... or probably triggers of manual.    Just be careful if the brand you choose is reliable.

  Pocket wizzards and RadioPoppers were the choice of PRO for years.  Because they are reliable.

• Is it possible to route signals of relaxation between two chassis PXI-1002 with the PXI-8335?

  Hello

  as the subject says, I am interested in the delivery of a signal to trigger between two chassis PXI-1002. At present, these two chassis are connected by a MXI - 3 system using maps PXI-8335. The software is Labview 2010 sp1 and 380 NIScope drivers.

  We want to keep (a PXI-5122 by chassis) scanners supply separated due to the requirements of our measure! The chassis are connected via cable to fiber optic. This explains why I can not just use the shutter release in Star, or connect via 'Trigger' or 'clk' cards (the inputs / outputs to the front of the cards).

  I found a few examples, but they seem to all be designed for use with a chassis only, I'll call later to the examples that inspired me to this point. Each guide explaining the synchronization of several chassis systems seems to use another material or VI is not accesible to me. This makes me wonder if my hardware has the capacibilities I need.

  The first picture shows approximately where I started from (sorry I can't post VI, confidential...):

  Only the middle part is interesting. Two sessions are initialized and manipulated parallel, trigger too. This has led to delays in the signals and should now be fixed. This apart from the VI works fine.

  Goal is to trigger only on one channel but both devices! If possible, the device will trigger must be chooseable.

  I started to rebuild the VI using the "EX Synchronization.vi 5xxx niScope' seeming spontaneity. The result is shown in the following image:

  

  I tried different RTSI lines, but had no positive results. only the main channel has triggered.

  After this first approach, I looked in the "niScope EX .vi multi-Device configured Acquisition (TClk)" and other examples of TClk which seem to work for similar problems. The VI of reconstruction can be seen in the following images:

  

  (Sorry, I had to use two photos..)

  In this case, I didn't have no choice for trigger lines, it would automatically set the VI TClk. I tried to trigger on both devices, though. This second approach seemed promising to me, but it was an error:

  "niTClk Synchronize.vi:1".

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  Status code:-89125niTClk Synchronize.vi:1

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  "Status code:-89125"

  This error came back even after I've identified this drug as possible to the MAX, as shown in the screenshot:

  

  In some of the textbooks, they showed how to get the MAX trigger lines, but as you can see, there is only booking options in my MAX. Whatever I do, I can't find options to define how to get my trigger signals...

  In principle, it is possible to trigger instruments in different chassis, which is indicated in this Guide and others... the question that remains is can it be done with my set of components?

  I understand that the use of multichassis compromised the integrity of the lines very adjusted as trigger in Star etc., so the configuration should be taken into account in some way, that my approach does not, I knew... But there must be a way to do this? And to start: to get just any signal from one device to the other trigger!

  For any advice on this issue, I would be very thanfull!

  Concerning

  Max1744

  Hi Max,.

  Thanks for the detailed post and explanations of your application and requirements. You're right using TClk, because this is the optimal method to synchronize the 5122 digitizers. The original VI you worked with is unique for some of the legacy scanners and does not directly work with scanners based on the most recent CMS (for example the 5122). The good news is that you can synchronize these cards to separate chassis, but it will use the calendar 66xx and synchronization (T & S) cards in the chassis of the master and the slave, as indicated in the guide that you have accessed. These are needed because a common reference clock must be shared between them as well as a couple of tripping. MXI itself can not handle export triggers and clocks, so there is no way to do this without physically wiring between the chassis with cards T & S. Unfortunately, regardless of what specific method, you use for synchronization, it will take a material extra beyond what you currently have.

  As one of your needs looks like it is necessary to retain wiring between the chassis directly, you may need to consider to synchronize using 1588 or GPS protocols. 1588 Protocol is a system for synchronization on the network while GPS course use antennas and locks for a common wireless signal. Although these synchronization methods may allow you to keep your chassis isolated, they will also require some manual configuration because you would be able to use the TClk synchronization and so the level of synchronization you can get between the cards may not be as good that can physically wire signals between the chassis using T & S cards.

  Hope this helps,

• Can I use your Apple TV with MacBook Air

  I use a MacBook Air, 13-inch, mid 2013, OS X El Capitan 10.11.6. I am interested in Apple TV. With this product I was able to connect my Epson EB - S18 projector to my Mac in order to project movies that I bought on iTunes on my wall of the apartment? Would be there is always a problem to play these movies 'protected' outside the computer itself? Must they be downloaded in SD and not HD? Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port? Can I use a patch to connect the VGA cable to the port on the computer to the projector? Please notify.

  Thank you very much.

  Can I use your Apple TV with MacBook Air

  Yes! AirPlay with an AppleTV is the easiest to use and less complicated solution.

  SD / HD makes no difference.

  You will only be able to enjoy the full quality of an HD movie with a better projector however. This model projector is not really intended for presentation of home theater. It will work well. As you can imagine that there is no upper limit on the amount, you can overlook these things, but $2000 is going to buy a nice home theater projector these days. A few years ago, you would need to spend $ 50,000 or more.

  Would be there is always a problem to play these movies 'protected' outside the computer itself?

  No, not if you bought (or leased) from iTunes. They have to play on any device compatible iTunes. You can even use AirPlay to distribute it to your AppleTV from an iPhone.

  Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port?

  Yes.

  Can I use a patch to connect the VGA cable to the port on the computer to the projector?

  Not without a converter. Avoid using the VGA if possible. It's a terribly outdated and generally horrible alternative to any digital standard. Since your MBA has a port Thunderbolt, and if your projector has a HDMI input, buy a cheap (± $10) Thunderbolt to HDMI adapter cable. But AirPlay is preferable to a wired connection.

• How can we do a single element with the content of two clips

  How can we do a single element with the content of two clips

  You try to get a picture of image? In other words, that contained two visible clips at the same time? If you are, change the substantive item to you main plot and another tie on top using an edit connect to the battery. Select the top item. Activate the transform tool and resize and reposition the clamp if necessary.

  Russ

• Can I use data value references with a functional overall?

  Can I use data value references with a functional global?  I am trying, but it causes problems:  I run the attached VI with "new DVR" selected.  Then I run it again with "return array" and I get the error 1556: "The reference is invalid. This error might occur because the reference has been deleted."  It seems to have forgotten the DVR, but I thought it should be stored in the shift register.
  
  Another odd thing:  In my VI, if I try to connect the wire shown in "something strange", then the type changes (from U16 array to DBL), i.e. it doesn't recognize the type referenced by the DVR.
  
  I want to pass a very large 4-dimensional array between parallel loops with a functional global.  To avoid memory problems, I want to use a DVR and in-place element structures.  If that's not allowed in Labview, I will try passing it through a user event or notifier.  Any problems with those alternatives?
  
  Thanks.
  

  I received a response from an engineer applications OR on this subject, and it seems that it is perhaps a problem with Labview.  They are working on it, so I'll go ahead and close this discussion.

  Thanks for the help,

  Allan

• I have four recovery disks that after I bought my computer, I did. These disks can be used to install Windows on the new drive?

  My computer came with Windows 7.  Recently, my hard drive failed.  I have four recovery disks that after I bought my computer, I did.  These disks can be used to install Windows on the new drive?

  YES!

  I just did mine 01/01/2016, installed a new WD 500 GB HDD black on my laptop ASUS K52F, took my DVD 4 restore disks and restored to Win 7 Home Premium, more 10 Windows, which is sitting on my old HDD in the trash. I'll stick with my Original OEM OS and never improve to WIN 10 times.

  NOTE: The only time the restore disks do not work is when you replace your motherboard.

• I changed my password in the cloud, but I can always sign in my PC with the old password

  I changed my password online, but I can always sign in my PC with the old password

  To connect to online services, you must use your password later. However, we recognize that sometimes you just need to get to a document on your PC and may not have an internet connection to validate your password more later. In this case, we you always let connect you to your PC using the last known password, but then when you want to use services online, we will ask you your last password as soon as we need to authenticate you.

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.