Can I use Muse or Dreamweaver. What is the difference?

Can I use Muse or Dreamweaver. What is the difference?

Hello

Here's the thread related muse vs dreameaver

Tags: Adobe Muse

Similar Questions

  • Ive been told to rebuild my site, can I use Muse or Dreamweaver?

    Hello world

    Recently, I had someone do a check on my website and the results that came back were not good. It seems I have all sorts of problems with my site, mainly from the SEO point of view. The guy who did the audit said they could rebuild for me, but the quote was very expensive. I think I could do it myself to try to save money. One of my good friends suggested I use Muse, but before he said, I had never heard of him.

    I have never designed my sites using Dreamweaver and I am very confident to use it.

    So my question is, should I use Dreamweaver or Muse? What is the best? Is there really much difference?

    Oh, and here's my site if you have any suggestions. Muted | gear

    Thank you.

    Hello

    Take a look at the similar discussion here

    Muse vs dreameaver

    Let me know if you have any question.

  • Can I use Muse to generate the CSS code to improve a basic website?

    My new fulfillment center offers a basic showcase.  Can I use Muse (or another Adobe product) to improve the site?  I'm not a web designer, but the videos and tutorials seem very simple and user-friendly tools for the non-techie user.

    Thank you

    No, you would not be able to use the Muse to edit a website non-Muse. Dreamweaver is most likely you want to use. The new Live View and Panel Designer CSS in Dreamweaver make it simple enough even for the non-codeurs.

  • Can I use Muse with an existing Web site?

    Can I use Muse with existing websites created with the Adobe? Or can I import a site I created with Dreamweaver in Muse?

    Post edited by: Corey@Adobe

    You will be able to import an existing site that has been created outside of the Muse, or the site that is created when you export as HTML of Muse.

    You must use the original .muse file in order to edit your site.

    Post edited by: Corey@Adobe

  • My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

    My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

    have you tried to change the batteries in the mouse?

  • What key combination can be used to capture a screen to the Clipboard? __

    What key combination can be used to capture a screen to the Clipboard?

    http://en.Wikipedia.org/wiki/screenshot

    In Microsoft Windows, pressing the button print screen capture a screenshot of the whole office and put it on the Clipboard. Pressing the combination Alt - Print Screen captures only the current active window. In most versions of Windows, captured screenshots do not include the mouse pointer.

    Video content in the programs using a hardware overlay video converter is not captured by the method described above. Windows Media Player on Windows XP in its default configuration on supported hardware is affected by this. However, some third-party applications can capture overlay images.

    By default, Windows does not record the screenshot to an image file; the user is required to paste the image into a separate program (such as Microsoft Paint, which is integrated) imaging for the economy. Some programs, however, especially online multiplayer, will automatically save screenshots in a specified folder. From Windows XP (or any version based on Windows NT), it is no longer possible to take screenshots of windows DOS full screen without other software.

    Windows Vista and Windows 7 include a utility called Snipping Tool, first introduced in Windows XP Édition Tablet PC. This is a screen capture tool, which allows you to take screenshots (called snips) of windows, rectangular areas, or a free-form area. Shears tinsmith can then be annotated, saved as an image file or an HTML page or by e-mail. Unfortunately, it does not work with uncompressed, XP versions but represents an XP compatible equivalent.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://en.Wikipedia.org/wiki/Print_screen

    In Microsoft Windows, pressing print screen will capture the entire screen, while pressing the alt key pressed in combination with the screen print will capture the selected window. The captured image can then be pasted into an editing as a word-processing, electronic mail, or graphics softwareprogram. On the keyboards that have a caps lock key, you may have to press lock first. Pressing print screen, with the alt key and the SHIFT key pressed, turns on a mode of high contrast for people with visual impairments.

    See you soon.

    Mick Murphy - Microsoft partner

  • Since the recent upgrade, my Photoshop menus tools have no names, and I can't use it properly. What can I do to fix this? I already tried uninstalling and reinstalling to no avail...

    Since the recent upgrade, my Photoshop menus tools have no names, and I can't use it properly. What can I do to fix this? I already tried uninstalling and reinstalling to no avail... I've updated the graphics card drivers. also... I tried to reset the default preferences

    1, make a bug report https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for requests for features or bugs

    2nd, consider going back a previous version via the Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

  • Can I use MSTSC to connect remotely on the internet?

    Can I use MSTSC to connect remotely on the internet (local computer is Vista Ultimate SP2 to a distance Win 2003 Server)? I used MSTSC on my local network and it works well.

    Hi Ibaltsae!

    Thanks for posting. Yes, you can use MSTSC to connect remotely to a computer or server on the internet, the same as if you were using your local network. To connect to the remote computer, use the DNS or public IP that are associated with name.

    I hope this helps! Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Can someone tell me what is the difference between a default playback device and a default communication device?

    original title: sound settings are very complex. Can someone tell me what is the difference between a default playback device and a default communication device?

    In fact, I use the recording software to record songs instead of downloading. Some recorders record their own drivers and they work fine. But sometimes, they do not respond. The DD Realtek Audio Manager is sick with something. People suffer a lot using this. My questions are endless. Some of them are:

    • What is "Realtek Digital Output?
    • Save devices-part of sound cards?
    • What are animals like 'Audio CD' and 'Stereo Mix' displayed on the DD Realtek Audio Manager?
    I'm sorry for not being specific, but I need a very good idea of how to deal with the settings of the sound in windows 7. And one thing, I have no microphone plugged but always Realtek HD Audio Manager detects? Why?

    Hi SandiKollol,

    A communication device can mean different things, but mostly it is used to allow voice communications on the internet.

    A playback device plays his return, such as your speakers or headphones.

    I hope this helps.

  • Im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected.

    Hi im having problems to connect my helmet at the entrance in front of my laptop, and I can't use my microphone, which says that the "device" is not connected. What should I do? Thank you

    Hello

     
    1. have you checked the problem by plugging the headset to another computer?
    2. it worked before?
    3. What are you talking about ""device"is not connected?
     
     
     
    I suggest you to connect to another computer and check.
    Also check if the device is compatible with Windows 7.
    Reference:
    Windows 7 Compatibility Center
    If it's compatible, perform the methods below
    If it is not compatible, see the following articles:
     
     
     
     
     
     
     
    Method 1: Run the audio Troubleshooter and see if it helps.
     
     
     
    Method 2:
    Run the Fixit described in the article and perform the steps:
    See also:
     
     
     
     
     
    I hope this helps.

  • What is the difference between using Global or an initiative called when you configure custom or user-defined fields?

    What is the difference between using global or initiative when setting custom fields?
    If you have or are never going to have multiple initiatives, him setting the Global causes all initiatives for this area.  If you start by choosing the initiative or initiatives that you want to use this area (the recommended way to go), you have choices later if you add another initiative.  I always go to the initiative, and then it can be added to the new initiative that I wanted.

  • What is the difference between dedicate this device to ready boost and use this device?

    Hello

    I wanted to know what are the differences between the two above. Could someone please explain?

    Hello

    Ready Boost is intended at startup to speed things up...

    You can use the DATA reader when used for Ready Boost...

  • What is the difference between POS and VSC? Which should I use?

    Hello

    Turns out we have a multitude of backup running for our virtual machine environment. We lack vCenter 6.0, 6.1 VDP, VSC 6.2P1, SnapManager for SQL and SnapMirror jobs put in place in OnCommand 3.1.2.

    I go crazy trying to pierce the need to have all these products running of backups and snapmirroring data. Bottom line, our SnapMirrors for one or two Volumes take f o r e v e r... And that impacts my tests of SRM (when you use the replication of data).

    I'm trying to clean up, he perfected down, consolidation, re-scheduling and friction on all these solutions. And in the middle of my panic, I thought that "these all do essentially the same thing? Taking snapshots and SnapMirroring data? »

    So, my question to the community is, what is the difference between these solutions, or are they all essentially do the same thing? They confront each other, vying for the band width and stumbling on them to achieve the same thing? Right now my plan is to suspend all work of everything except VSC and SnapManager for SQL and do all this from VSC. This means suspend jobs in NetApp services.

    I'm not the admin for POS, it is my co-worker, so he who installed independently of my work. Is it still necessary?

    What brought me to all of this, besides the failure of MRS to transfer data (SnapMirror on request within a reasonable time) was noting the deltas for our work of snapshot is always huge at certain times of the day. For example, our biggest pork of data has a light snapshot at midnight, and he is constantly 71GB. This leads me to believe that this is a job, because it is predictable. The net effect is SnapMirror jobs take days, latency are several days and transfers has never really stop.

    We plan to upgrade our pipe between our protected Site (HQ) and our DR Site (branch) of 50mbps at 100 Mbps. We have 100 out of our headquarters and 50 in our satellite TV right now, so we want to both be 100. Maybe that would solve the issue, but I still would be pretty effective.

    If you need more information, let me know and I will fill you, or less make up something so I look like I know what I'm talking about.

    TIA!

    Steve

    The reason why you do SnapMirror replication is DR. It is not a backup solution. If you stop all your SnapMirrors in OnCommand Unified Manager and your storage array, the production goes down, you no longer have a DR.

    What does VSC is, it creates snapshots of your NetApp volumes, you can use for short term backup/recovery. The snapshots are not a real backup solution, however. If someone deletes a volume on the NetApp snapshots of this volume will not save you because they no longer exist. But they are still useful in many scenarios, such as Previous Versions of Microsoft CIFS options.

    SnapManager aims to make consistent snapshots of demand for software such as MS SQL in your case. Instant database do not give you this ability, as they do not trigger the VSS suspension. More SnapManager for SQL gives you point in the ability to recover in time for your databases to SQL transaction logs, which provide none of the solutions above. However, as SnapManager creates snapshots, you must make sure that you have dedicated LUN for you SQL VM, otherwise you will be taking snapshots of the same volumes twice.

    And now VDP makes backups of your environment. It supports long-term retention, as snapshots in general are not kept for more than one week or one month. Make sure that the data are stored on a separate volume from where are your virtual machines. Or ideally to a destination that is external to your storage group.

    Hope that clears things up a bit. The result is, what you have is perfectly fine.

  • What is the difference between the two publish to ftp host and export as html in Muse?

    What is the difference between FTP publishing and export as HTML in Muse? When I had some problems with missing assets, I exported as HTML and fixed it, but it didn't update on the layout of the phone or completely on the desk until I published on ftp. Assuming that perhaps export just updates the files on the server? Thank you

    Hi Brian,.

    Site as HTML export will export just your Muse site on your desktop without making any changes to your site online, but when you select Publish to FTP, it publishes the changes you did for your website online.

    Export to HTML format is mainly used when you want to use any external client to load your site on the server.

    Refer to this document to better understand: Adobe Muse Help | Download a Site from Muse Adobe on a third-party hosting service

    Kind regards

    Akshay

  • What is the difference brtween CS6 Dreamweaver and Dreamweaver CC?

    What is the difference between CS6 Dreamweaver and Dreamweaver CC? It seems that the CC version is a a license, while CS6 is for life. Is this correct? If I buy the CC of Dreamweaver, it will expire after one year if I don't renew it? Will I still get Dreamweaver software to use without creative cloud?

    What is the difference between CS6 Dreamweaver and Dreamweaver CC?

    Now, about 5 versions apart.   Review the requirements below:

    System requirements | Dreamweaver

    CS6 12.0 (perpetual licensed version). No more updates available.

    Creative Suite 6

    All others are available by subscription creative cloud

    Pricing plans and creative Cloud membership | Adobe Creative Cloud

    =====================================

    New features in CS6 12.2

    2013.html http://helpx.adobe.com/Dreamweaver/using/Whats-New-Dreamweaver-Creative-Cloud-Release-Feb-

    New features in CC 13.0

    http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-CC-2013.html

    New features in CC 13.1

    http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-131.html

    New features in CC 13.2

    http://helpx.Adobe.com/Dreamweaver/using/whats-new-Dreamweaver-13-2.html

    New features of CC June 2014

    http://helpx.Adobe.com/Dreamweaver/using/whats-new-2014.html

    New features of CC 20141 October

    http://helpx.Adobe.com/Dreamweaver/using/whats-new.html

    New features of CC 2014.1.1 February release

    https://helpx.Adobe.com/Dreamweaver/using/whats-new.html#enhancements%20To%20Live%20View%2 0editing

    Nancy O.

Maybe you are looking for