Can I use ODBC drivers instead of the JDBC driver?

Similar Questions

• I have four recovery disks that after I bought my computer, I did. These disks can be used to install Windows on the new drive?

  My computer came with Windows 7.  Recently, my hard drive failed.  I have four recovery disks that after I bought my computer, I did.  These disks can be used to install Windows on the new drive?

  YES!

  I just did mine 01/01/2016, installed a new WD 500 GB HDD black on my laptop ASUS K52F, took my DVD 4 restore disks and restored to Win 7 Home Premium, more 10 Windows, which is sitting on my old HDD in the trash. I'll stick with my Original OEM OS and never improve to WIN 10 times.

  NOTE: The only time the restore disks do not work is when you replace your motherboard.

• Can I use a different version of the Windows driver to install my scanner?

  I have an abandoned scanner which has drivers that are compatible with Windows Vista, 2000, ME and 98. I have Windows 7 Home Edition on my new computer and that you need to load the driver for my scanner Visioneer 9320. Can I use one of the above drivers or do I need to get a new scanner? Thank you.

  Wednesday, October 3, 2012 16:02:52 + 0000, Jennifer S_844 wrote:

  I have an abandoned scanner which has drivers that are compatible with Windows Vista, 2000, ME and 98. I have Windows 7 Home Edition on my new computer and that you need to load the driver for my scanner Visioneer 9320. Can I use one of the above drivers or do I need to get a new scanner? Thank you.

  You can try the Vista driver. It might work. Others will not.

  Ken Blake, Microsoft MVP

• Portégé R400 Tablet PC - 2nd battery instead of the optical drive

  Can someone tell me if the R400 Tablet PC can take a 2nd battery instead of the optical drive?
  From Toshiba Web site and the specs don't say do I guess this isn't?

  Just FYI;
  Check out this website of Toshiba Portege R400:
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/seriesHomepage.do?service=UK&SERIES_ID=123942

  and [here | http://uk.computers.toshiba-europe.com/Contents/Toshiba_uk/EN/Others/datasheets/PortegeR400_0707.pdf] you can download the datasheet Portege R400.
  It is perhaps useful to s

• How can I use my watch to snap the shutter on my iPhone?

  How can I use my watch to snap the shutter on my iPhone?

  Click here > https://help.apple.com/watch/

  Then click on: Remote Camera on the left.

  You'll see instructions.

• Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  

  I did it with a 32GB SDHC UHS - I Transcend

  

  I do not recommend under OS X from such media, but it works very well. I was preparing for my review of the CPHA Yosemite and did not want to mess with the internal drive of OS X.

• Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode.

  Since I changed the Windows 7 32-bit to 64-bit operating system, I can't use Firefox browser except change the browser in safe mode. When I start the browser is not open and it displayed a message
  Mozilla Crash Reporter

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; InfoPath.3)

  Go to the address on: plant and tell us your last accident IDs. Then we can watch data specific to your accident and have a better idea of what is causing the problem.

  Given that everything goes well in safe mode, one of your extensions or themes is at fault. See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems to figure out which one of your modules is the cause of the crash.

  Start here: https://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes#The_problem_does_not_occur_in_Safe_Mode

• How can I use my current windows7 for the new portable computer

  Original title:

  Windows 7

  Hello

  I bought the original windows7 and I currently use it in my laptop. I recently bought a new laptop and now I want this original windows 7 on my new laptop.

  How can I use my current windows7 for the new portable computer

  Please notify

  Concerning

  Run you where you are unable to activate code product. It gives you a list of phone numbers for Microsoft to ring.

• How can I change the player assigned to the SSD for a SATA instead of the SCSI drive?

  Original title: SCSI instead of SATA

  I built a PC with Windows 7 Ultimate 64 bit.  My C: drive is a Samsung 840 Pro SSD.  The system never worked properly and I discovered that the SSD which is a SATA 3 drive in Device Manager is configured as a SCSI disk.  Someone knows how to change the driver assigned to the SSD for a SATA instead of the SCSI driver?

  Hello Uriel,

  Thank you for your response.

  SATA controllers will normally appear as "SCSI" controllers in windows. It's normal and nothing to worry about. Often the SATA controllers will also be able to run in IDE mode and then they present themselves as IDE controllers, but it is unlikely that they will be able to operate optimally, as the IDE interface is missing some features of SATA. So even if you do not have the ability to set the cache in the Device Manager, a SATA controller is running in mode SATA should work just fine.

  The IDE bus is managed by the controller SATA3, and if this control is set in the BIOS to "IDE" somehow it seems related to the operating system as a SCSI device.  By setting this entry in the BIOS to "RAID/IDE" IDE devices get properly detected.

  This can also occur if you change the BIOS settings for the SATA ports of 'IDE' to 'AHCI' after installing Windows 7.

  I hope this information helps.

  Thank you

• Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?

  Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?  How about studio flashes (Alien Bees)? I just sold my Canon gear and moved to Sony, but I need advice on how to trigger wireless flashes.  Thanks for any help you can provide.

  Larry

  LarryMarshall, Any Trigger of manual Radio should work.  Assistants of pocket or RadioPoppers.

  But there are a few problems with the 60 m.

  (1) it doesn't have a PC or a 1/8 port to connect directly to a Rec Radio of any brand.

  (2) you WILL NEED to buy or use a hot shoe with a PORT adapter... 1/8 according to the sync cable or PC you may already own.

  (3) you WILL NEED to 'Check' to 'ensure' that trigger the 60 m SHAFT is aligned with the center of contact your hotshoe adapter hot with a PORT... because some adapters won't online upward with the 60 m Flash... who fooled you into believing that it does not work.  When, in fact, it's just the PIN which is not aligning with ALL the hot shoe adapters.

  It will work... you just have to be careful... and know of the gatcha.

  The 60 m PUT claw is not fully compatible with all... hot shoe adapters and there that to do with how PUT 60 m flash foot aligns the trigger ROD.

  I triggered the 60 m in flash with RadioPoppers... in the manual... so, I know it works.

  It is, manual release of the waste of the 60 m flash TTL/HSS abilitys.    What is needed is for SONY to develop and deliver a Radio trigger Solution.  Which would be TTL/HSS and you allow to 'Control' the Flash too... from the camera.

  It is the power of a Flash of modern Radio System.

  Manual triggers are old school.

  p.s. the A7r/A7 can easily trigger flashes of Studio with Pocket Wizzards or RadioPoppers... or probably triggers of manual.    Just be careful if the brand you choose is reliable.

  Pocket wizzards and RadioPoppers were the choice of PRO for years.  Because they are reliable.

• I can't use illustrator because it took the serial number

  I can't use illustrator because it took the serial number and I uninstalled the app and redownload again my computer Illustrator program. But I can't download it. Help, please

  Windows or Mac?

  
  

  If you have not installed Adobe Creative Cloud app, you can download at the bottom of the link:

  
  

  Windows:

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

  Mac:

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

  Reference:

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

• Images uploaded by share subscription can be used by a company in the same division?

  Images uploaded by share subscription can be used by a company in the same division? If I alter the image or do not change it? They will not change it, just posting on a blog or other social media.

  Yes, provided that they fall within the license agreement.

  http://wwwimages.Adobe.com/content/dam/Adobe/en/legal/servicetou/Adobe_Stock_Terms_en_US-2 0150313_hpc.pdf

• I can't use creative cloud. After the program open, I see backbone of creative cloud and empty space without all the icons. I want to download photoshop as I pay by bank transfer for Adobe...

  I can't use creative cloud. After the program open, I see backbone of creative cloud and empty space without all the icons. I want to download photoshop as I pay by bank transfer for Adobe...

  If you see a blank white screen, see this link. If you see something else, please let us know what you see.

  Blank white screen. Sign in | Creative cloud Packer

• How can I use SQL to check if the receipt is taken into account?

  Hi all:
  How can I use SQL to check if the reception of the AR is taken into account? Because there are so many recipes to check, I can not open to see the details one by one.
  
  My environment is: 11.5.9
  database: Oracle 9.2.0.8

  Terry,

  Run the script (11i: Oracle receivables data reception Data Collection Test [215969.1 ID]) and see if it helps.

  Thank you
  Hussein

• How can I use my time capsule as a hard drive on an existing network accessed through a password

  How can I use my time capsule as a hard drive on an existing network, storage, accessed through a password?

  We need more information in order to provide the right solution and Setup for you.

  You already have another router Apple... as an AirPort Extreme or Airport Express that provides the signal of your wireless network?

  If not, what is the serial number and model of your modem?

  Finally, what operating system is installed on the device you will use to install and configure the time Capsule? If it's a Mac and you're not sure what operating system it uses... click on the Apple icon in the upper left corner of the screen, then click on about this Mac, and post back with number of Version of OS X that you see there.