can not get netframe work 3.5 service pack 1 to install always get an error code ox643
I have a hp windows xp x 86(32 bit) media center 2005, I tried for about 3 to 4 weeks to get to dragon speaking naturally premium to install on the computer > it will not install because it says I have to install netframe work 3.5 SP1 in order so that he can install it. . When I try to install the netframe 3.5 I get a code error message 0 x 643. Is it possible to get the netframe work 3.5 service pack 1 to install when the netframe who entered the computer is part of the operating system. I tried to eliminate the netframe 1.1 work with the system, but also many other programs is tied to it and would not be able to serve.
HELP PLEASE!
When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
http://support.Microsoft.com/kb/976982
If necessary:
Order of relocation:
- .NET framework 3.5 SP1 (this will install the .NET Framework 2.0 SP2 and 3.0 SP2)
- .NET framework 1.1 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
- .NET framework 1.0 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
- .NET framework 4
For more information, please visit: http://blogs.msdn.com/b/astebner/archive/2010/12/22/10108400.aspx
Tags: Windows
Similar Questions
-
Can not get updates error Code 80246008
I can't BITS to start and receive error 193:Oxcl "Windows failed to start the BITS service on local computer. I use Vista Home Premium 32 BIT.
http://support.Microsoft.com/kb/956706
"Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site:"0 x 80246008.
Hope the above helps.
There are two different methods to try the MS link above.
See you soon. Mick Murphy - Microsoft partner
-
Vista SP1 - error startup! 0xc0190002! 328/88027 ($$ _boot_pcat_ja - jp_d98fca962b0246de.cdf - ms). I can not get this error to go away and start my PC now. Help, please!
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or try this Forum:
http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads
Restore the previous settings, repair facilities, and retrieve data.
See you soon.
Mick Murphy - Microsoft partner
-
Ideas:
- When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you
I tried to download the RegCure as advised, but the problem still exists...
Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.
See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Im trying to install vista service pack, its driving me crazy. im making error code ox800700. Help, please
Hello
Error message: 0 X 8007002 can occur if the update of Windows on the computer database is incompatible with the instructions of the update database.
Refer to the suggestions from the following link and check.
Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002. -
I have made several attempts unsuccessfully to update my vista using the automatic update for service pack 2, but I always "update has not 8024200d error number". I tried a start-up in minimal mode, but automatic update does not appear. I reached my intellectual limits. What means exactly the error 8024200d mean?
How do I beat successfully automatically update?
F....Hi Mubarak,
Can you please tell me the number of KB article of updated with the question?
Take a look at the response from here-
Thank you.
-
I have an ASUS K52F/K62F computer laptop w/Windows 7 Home Premium, Service Pack1. The icon of my laptop shows an indication for an error/problem. The error is "Microsoft Terendo Tunneling adapter, error 10 code, the device cannot start.
I went in the Manager device and uninstalled this 'network card' and then tried to reinstall, however, had no chance. Read the suggestions of various forums and various download sites, but have had no success. Any suggestions? where to find the referenced so adapter disc I can download? Uninstall and reinstall windows 7? update to windows 7? Download windows 10? My wife has a laptop ASUS with Windows 8 and she recently downloaded windows 10 which now works, but takes it little time to get used Windows 10.
I've been on his computer w/Windows 10 laptop and I still prefer Windows 7.
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you are getting an error code.
I suggest you to refer to the suggestions by Jatin Pradhan replied on 17 October 2014 and check if that helps.
You can also check:
https://support.Microsoft.com/en-us/KB/943104
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
WdiServiceHost does not get the error code 5 access denied
Diagnostic Service Host System (WdiServceHost) has been unable to restart when you try to restart maintain error code 5 access denied. How to restart the Service
Hello
You did changes to the computer before the show?
I suggest you try the steps from the following link:
Some services do not start in Windows Vista and Windows 7
http://support.Microsoft.com/kb/943996Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista
-
Hello
I tried to install windows service pack 2 for vista via windows update, but it fails everytime with error code: 800F081F. I tried to run Microsoft FixIt and systsme even update the tool but no luck. even the system tool update crashes while ' installation of hotfix for Windows (KB947821) (update 1 of 1)...» ". No online solution proved to be correct in my case. Help, please.Thank youHello
System update readiness tool will take some time, so I suggest you wait a while until the process is completed.
You can find newspapers by accessing this folder.
c:\Windows\logs\cbs\checksur.log
I would suggest trying the following steps and check.
Method 1:
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
Methods 1 and 2 require changes in the registry to do. Make sure that you back up the registry before you proceed.
I would have you look at the article-
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 2-
I would have you look at the article-
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997#appliesTo
Note: The Chkdsk command will try to fix bad sectors on the hard drive. All the data on these areas could be lost in the process. It is also possible for the computer to enter in a start State no.
Proceed at your own risk.
In addition, see the reference article-
Problems with installing updates
http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates
Answer if you need more information on this, and we will be happy to help you.
-
I forgot my password and can not get a reset code to work
A few days ago, I changed my password on my mobile device. Subsequently, I was unable to access my account on pc. I need help with this. I keep this message copy the link in the browser. I don't know how to do this. Help, please. I can't disable my account because I can't access account without password. I can't change my password to access my facebook account
Contact Support phone manufacturer that can help you with your password reset.
Generator of QR Code Google use
https://chrome.Google.com/WebStore/detail/cicimfkkbejhggfjaabggafffgdnjgjp
Copy/paste Windows Phone
http://www.Microsoft.com/windowsphone/en-us/HOWTO/WP7/basics/copy-and-paste.aspx
-
I continually receive an error indicating this update has failed. I tried to understand what could be the cause. I just bought a new laptop (Acer - Aspire) which has been preloaded with Windows 7, almost a month. All other MS updates have been successful. Any advice would be greatly appreciated. Please note that I am not a guru comuter, so if you can keep your answers in other words, it would be most appreciated. Thank you!
Hi Jejali_67,
Sorry that the problem still persists!
You can try to unregister and re-register Windows install and check if you are able to perform updates.
To unregister and re-register the windows installer
1. exit all Windows programs.
2. click on start, type run in the search box and then press ENTER, type msiexec / unregister in the Open box and then click OK.
3. click on start, type run in the start search box and then press ENTER, type msiexec/regserver in the Open box, and then click OK.
4 restart your computer.
This should solve the problem and you will be able to perform the update of windows.
You can also see the link given below which talks about the same issue.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Computer tried to install the automatic update for SQL Server 2005 pack 4 (KB2463332) fails with the 0xD59 error code
Hello Rich Boetsch,
Please ask your question in the forums SQL Server within TechNet they manipulate all server related issue.
See you soon
-
my system downloaded and installed service pack 1, yet auto update keeps popping up telling me to instal it?
Hi Jerry,
1. How have you installed service pack 1 before? Is it through Windows update?
2. have you checked the Windows update history?
Check if the Service pack is already isntalled on the computer. Follow the steps.- Right click on "computer".
- In the system of the Details check if section Serivce pack is mentioned.
If the Service pack is not installed, then you can download the stand-alone package for Service Pack 1 and install.
See the article to download the stand alone Service Pack 1, and then run the installation.
Windows Vista Service Pack 1 five language standalone (KB936330)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=30You can verify if the service pack is installed in Windows update history.
Reference:
See the Windows updates are installed
http://Windows.Microsoft.com/en-in/Windows-Vista/see-which-Windows-updates-are-installed
Hope this information helps. Response with status so that we can help you.
-
Can not get the updates of Windows after crash, also need service pack 3
Original title - service pack 3
Computer crashed and can't seem to the windows update page to download updates. It seems that I need service pack or packs to do this, but can not get to any place for that in addition to devopler or it version that does not work. Someone at - it help him?
SP3 for XP can be ordered on CD.
http://support.Microsoft.com/kb/322389#Method2
or downloaded
http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
I suspect that you've already tried this source.
Tom Ferguson
-
Original title: internet telephone
My PC (win XP) can not get Internet through a Bluetooth adapter to the phone, same phone work with win 7 & vista
Hello
1. What is the brand and model of the phone and Bluetooth adapter?
2. what exactly happens when you access the internet via your phone?Please provide more information. This will help us assist you better.
How to ask a question
http://support.Microsoft.com/kb/555375
Also, please take a look at the below items that might help you.
How to install and configure Bluetooth devices in Windows XP Service Pack 2
How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
Maybe you are looking for
-
HP Envy 15 Windows 7 Professional clean install Driver questions
This morning, I did a clean install of Windows 7 on my brand new envy 15 (LW897AV), which includes the deletion of backup partition as the partition driver HP. Unfortunately, many drivers not installed, and I can't find a way to find them. This inclu
-
Upgrade of RAM Acer Aspire 1830 t
Greetings, I'm running into a problem to upgrade the RAM on my Aspire 1830 t-3425. There currently 2x2G of PC3-8500 ram in it, but I found the information that says that it will take up to PC3-10600 ram 2x4G. (http://www.crucial.com/store/listparts
-
I used to be able to watch videos on a certain type of site now all say file not found windows vista. I recently added a router for a kindle fire original title: streaming videos
-
cannot share files from my Vista computer
I have a home network with 4 PC on it. My main PC is a Vista desktop computer, it is connected to my router. The other PC is connected wirelessly. I have a laptop with windows 7. and 2 other desktops with xp installed. My problem is the following...
-
Can I install my W7 Pro on a W7 prem-oem version that is installed on my HP Pc?
HelloW!Sorry for my bad English {it is not my native language} and I will try to be as clear as possible with my question. I bought HP Desktop in 2012 {with 2 hard drives, (c) & (E :) who already had an oem version of Windows 7 premium (x 64) install