Can not get the camers to work

Similar Questions

• Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Thanks Tanuj,

  After reloading the software it seems to work now.

• can not get the printer to work when sending my laptop computer that he used to work the printer is on and functional

  Can't get printer to work when sending my laptop computer that he used to work the printer is on and functional. Canon pixma MP180

  Hi NickManchisi

   

  1. for how long have you been faced with this problem?
  2. what happens when you try to print?
  3. do you receive any error messages?

  Method 1 :
  Please refer to the below mentioned article and check if the given steps help.

  http://support.Microsoft.com/kb/308028

  
  Method 2:

  You can even perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time when you have not experienced the problem.

   

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Refer to the following help link on performing a system restore.
  http://support.Microsoft.com/kb/306084

   

  I hope this helps.

• After restarting my computer Windows Vista, I can not get the wireless to work.

  Re start my Vista and now l can't get broadband wireless, but before he started he was work ing great. Can anyone help please, or can I use my windows 7 on my laptop by paying a fee

  Paul

  original title: Vista, broadband

  The computer is a Toshiba Satellite model PSLB8E-0CK00YEN

  l cleaned my vista with my drive, everything works, but the broadband wireless

  Which means that Vista has erased my discs, how l can get the disks on my lap top?

  Actually - if you have installed Windows Vista from scratch yourself (booted from the Windows Vista support and followed along to do a clean install or use some CD/DVD by default) then you're the one who has erased your disks and all data about them.  In any case - your "wifi" does not indicate any wiping.  * smile *.

  If it's just a simple Windows Vista DVD, then * you * need to get all the drivers for hardware on this computer.  You may need to use a different machine (of course) in order to get the proper and then drivers transfer to them for the Toshiba by USB/CD/DVD.

  Is this REALLY a Toshiba Satellite L300-20 d?  (Click on this link to check...)
  The * number * of part is PSLB8E-0CK00YEN.

  You should be able to get the drivers you need here:
  http://UK.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=UK

  Laptops
  Satellite
  Satellite L series
  Satellite L300
  PSLB8E
  Windows Vista 32 bit
  ----- All -----
     
     

  (Click on research)

  Page 3 of pilots - one of the two wireless Lan drivers.  I have no way of knowing that.

• Can not get the printer to work under Windows

  I have a Brother Laser printer and a Canon ip8500 printer.  I tried to get one to run Windows XP Professional.  This week I installed the Hello printer software and it finds my printers but then I get this message "sharing is not supported for this type of printer.  When I click on settings in VMware, disabled the said printer icon.  If I close Windows and click on settings in VMware, the icon of the printer is enabled.  I'd appreciate it if someone could help me get one of my printers to work.  I must do something wrong and just can not understand.  I use VMware version 2 and Snow Leopard on my iMac.  Thank you.

  onemulligan wrote:

  I use Fusion 2.0 (116369) and a version of snow leopard 10.6.2 iMac.

  Fusion 2.0 (116369) is not compatible with Snow Leopard and you should spend at least VMware Fusion 2.0.6 (free upgrade) or VMware Fusion 3.0.1 (paid upgrade).

• Satellite Pro P100 can not get the screen to work again

  If someone could point me in the right direction, I would be very grateful!

  I bought a monitor to use when I am in the office (it's a LG Flatron L225WT), installed the software that came with it and plugged. Nothing seemed to happen, then in Toshiba HWSetup, I changed my power on the screen 'LCD + Analog RGB'.

  To cut a long story short, the external screen works perfectly now, but I cannot access the internal screen, even after changing the power supply on the display to 'Automatic Selection '. The Fn + F5 key does not appear to have any effect at all.

  I must have inadvertently done something to mess up the computer. Can anyone suggest how I could reset it back?

  TIA to all who can help you!

  -Laurence

  I put t know what laptop you have and don t know what OS you are using, but it seems that you have managed to set the external monitor as the main screen.
  You should change in display properties (right click on desktop-> properties)

  Somewhere in the settings, you should try to score the internal display (1) and should mark use this device as the primary monitor

  You won't find any similar settings or this will not help then set the operating system to the point of time at the beginning. In this case all settings will be reset!

• can not get the updates to work error 0x802400a

  can't get updates to work the error code, 0x802400a

  SP3 is installed?

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• can not get the printer to work with pc

  that means when the message tells me that the printer doesn't have a pilot - it's recording and the printer is working but does not connect to pc

  that means when the message tells me that the printer doesn't have a pilot - it's recording and the printer is working but does not connect to pc

  This means that there is no driver installed on the system.  According to the printer model there may be a driver available via Windows Update or download on the website of the manufacturer.  If none of these options are available there may be a compatible driver that can be used by selecting a driver to a different printer model.

  What is your printer model?

• BlackBerry smartphones can not get the wireless to work

  Business email works fine, phone function works fine but I can't seem to get the job of Wi - Fi

  I pulled the battery and and started again without success.  My home network works fine, just don't know what I'm doing wrong. I'm in the configuration of a Wi - Fi and "Manually add network", type the network name (SSID) and set the WEP security then enter my WEP key.  I get the message the connection was successful, but when I try and open my browser I get this error message "unable to connect to the selected Mobile Data Service, please try again later".

  Phone is a platform for v4.6.0.126 9000 "BOLD" 4.0.0.135

  AAARRRGGGGGGGGGGHHHHHHHHHHHHHH!

  Thanks to bifocals!

  I discovered that it was something as simple as the activation of Java script

• Can not get the web service works

  I get the following error message when you try to call ASP.NET web service on the same host.
  
  TypeError: Error #1034: has no Type constraint: cannot convert function-2010 in Namespace.
  to mx.rpc.wsdl::WSDL/::processNamespaces()
  to mx.rpc.wsdl::WSDL$iinit()
  to mx.rpc.wsdl::WSDLLoader/mx.rpc.wsdl:WSDLLoader::resultHandler()
  at flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal::resultHandler()
  at mx.rpc::Responder/result()
  at mx.rpc::AsyncRequest/acknowledge()
  to: DirectHTTPMessageResponder / completeHandler)
  at flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flash.net::URLLoader/flash.net:URLLoader::onComplete()
  
  I use http://localhost/Hello/Service1.asmx?WSDL as the wsdl and it works when I browse it with the browser.
  
  Any help would be much appreciated.
  Thank you
  

  Got it... Finally!

  In my Tools.as file I had a static method named Split(Array,delimiter). I added this because I didn't like the stock of String.Split implementation... ie you get nothing if the delimiter is not found in the string, I wanted an array containing a single element in this document, the original string.

  in any case... There was a conflict of names with the Split method in the SDK because as soon as I changed the name of the method of SplitMeUp it worked and I got no longer error when loading of the WSDL.

• Can not get the video to work

  I followed tutorials Adobe, Lynda.com and Stackoverflow but cannot get my video to work in my presentation of edge animate.

  Here's the code I used. 'holder' means a rectangle on the stage. I put the code in a trigger of chronology according to the tutorial.

  var vid = sym.$("holder");

  VID.html = ("< video width ="300"height ="200 "src =" shortclips/one.mp4 "poster is" images/alpha20.jpg"type is" video/mp4 "controls =" orders"> < / video > ');

  I copied the HTML5 code directly into a Dreamweaver page, and the video worked fine, like the poster frame.

  Any help appreciated.

  A '=' ask problem.

  The code must be

  var vid = sym.$("holder");

  VID.html ("");

• Can not get the Messenger at work need wldlog.dll

  I can't the functioning of messenger. tell me that I always wldlog.dll... anybody born have all the answers. I did everything...

  Hello

  Please repost in windows Messenger forums in the link below

  http://www.windowslivehelp.com/product.aspx?ProductID=2

• Satellite L20-153 may not get the WLAN to work

  Hello world

  I have a problem with my laptop wifes that I've not been able 2 fix.

  Its windows had crashed and wouldn't start in 'BACK' keept marker just flashes and nothing happened, I tried to restore to later work windows, but that did not help, nor the integrated security mode. So I took out the CD/DVD recovery and tried to do a new installation, the configuration of the installation has functioned well until he asked me 2 remove the disc and restart the comp I did.

  When it restarts the same problem appeared (flashing marker and nothing happens).
  So what I did I took a normal windowes XP (SP2) and reinstalled eveverything (I formatted the drive also) and rebooted and it worked.

  2 my next challenge is 2 get all the hardware working I got all all work, but the WIFI network (integrated).
  After I installed everyting I saw my network wireless but next time I started the comp, it disappeared along with all other WLANS that I use to be Alba 2 see. and when I still have refreash sound empty.

  I tried to disable it and then turn it on again but it doenst help.

  I also tried once more to use the Toshiba recevory drive but you have the same problem.
  So now I'm back with my windows Xp is installed, but I can't get the WLAN to work.

  There isn't any conflics material.

  So now I need your help about how to do 2.

  tanks a lot.

  Kind regards

  Quickhat

  Hello

  On WLAN, there is actually no philosophy, and few things are important:
  The wireless network card must be installed properly (properly listed in the Device Manager) and
  It must also be enabled. Initially with switch WLAN (WLAN light is on) and then activate it by using the FN + F8 key combination.

  After making this key WLAN card should see all available wireless networks. To connect to one of them is another theme.
  To be honest I didn't understand exactly what is happening. If I understand you right your laptop can see WLAN but after reboot all available wireless networks is not visible. Am I right about that?

  Have you tried rebooting your WLAN router and restart analysis the WLAN area?

• MG6320 on Mac - can't get the installer to work

  I can't get the installer to work, fails to connect to the printer without wireless or wired. However, the Apple system preferences printer box can find the printer, allowed me to install the Apple driver, and I can print. I can also scan but only by using the Apple software. What should I do to get the additional applications provided with the printer to work, and why the all-in-one installer driver does not work?

  I am running Mac OS X 10.7.5, no firewall problems.

  Thank you!

  Hello.

  Please try to download the latest drivers for Mac OSX and software on our Web site.  These items can be downloaded from the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg6320#D...

  If additional information is required, please call us at 1-800-OKCANON.

• HP Photosmart series 7520 I can not get my fax to work at all

  I can not get my fax to work.  He always tells me that my phone connection may not be configured correctly.  I place the phone cord Jack #1 at the back of the printer and also connected the phone cord to the wall outlet.  I don't know what else to do.  But I'm losing too much time trying to get this working.

  I appreciate your advice and help. However, after checking, I found that the wall outlet is not working. Plugged into another connection and it worked fine.

  Thank you very much for your help.