Can someone get job JavaScript debugging?

Similar Questions

• Can someone explain what this debug is telling me (associated with ISAKMP)?

  It is a router 803. I have a second 803 that connects to it via the internet without any problem. If I created my own VPN I can connect to my office.

  However, I have a remote user who is trying to dial using a laptop and it keeps the message "the remote peer not responding" or words to that effect. I debugged the crypto isakmp while the guy was dealing in and got the following:

  4w0d: ISAKMP (0:20): audit ISAKMP transform 11 against 10 priority policy

  4w0d: ISAKMP: 3DES-CBC encryption

  4w0d: ISAKMP: SHA hash

  4w0d: ISAKMP: group by default 2

  4w0d: ISAKMP: pre-shared key auth

  4w0d: ISAKMP: type of life in seconds

  4w0d: ISAKMP: life (IPV) 0x0 0 x 20 0xC4 0x9B

  4w0d: ISAKMP (0:20): atts are acceptable. Next payload is 3

  4w0d: ISAKMP (0:20): processing KE payload. Message ID = 0

  4w0d: ISAKMP (0:20): processing NONCE payload. Message ID = 0

  4w0d: ISAKMP (0:20): load useful vendor id of treatment

  4w0d: ISAKMP (0:20): load useful vendor id of treatment

  4w0d: ISAKMP (0:20): load useful vendor id of treatment

  4w0d: ISAKMP (0:20): load useful vendor id of treatment

  4w0d: ISAKMP (0:20): load useful vendor id of treatment

  4w0d: ISAKMP (0:20): entry = IKE_MESG_FROM_PEER, IKE_AM_EXCH

  Former State = new State IKE_READY = IKE_R_AM_AAA_AWAIT

  4w0d: ISAKMP: had 1 callback

  4w0d: ISAKMP (0:20): SKEYID generated State

  4w0d: ISAKMP (0:20): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication

  4w0d: ISAKMP (20): payload ID

  next payload: 10

  type: 1

  Protocol: 17

  Port: 500

  Length: 8

  4w0d: ISAKMP (20): the total payload length: 12

  4w0d: ISAKMP (0:20): package is sent to * (R) AG_INIT_EXCH

  4w0d: ISAKMP (0:20): entry = IKE_MESG_FROM_AAA, PRESHARED_KEY_REPLY

  Former State = new State IKE_R_AM_AAA_AWAIT = IKE_R_AM2

  4w0d: ISAKMP (0:19): serving SA., his is 2E3BD30, delme is 2E3BD30

  4w0d: ISAKMP: Unlocking CONFIG struct 0x2DDB564 return of attributes, count 2

  4w0d: ISAKMP (0:20): received packet of * (R) AG_INIT_EXCH

  4w0d: ISAKMP (0:20): phase 1 package is a duplicate of a previous package.

  4w0d: ISAKMP (0:20): retransmission due to phase 1 of retransmission

  4w0d: ISAKMP (0:20): retransmission phase 1 AG_INIT_EXCH...

  4w0d: ISAKMP (0:20): retransmission phase 1 AG_INIT_EXCH...

  4w0d: ISAKMP (0:20): incrementing count of errors on his: retransmit the phase 1

  4w0d: ISAKMP (0:20): retransmission phase 1 AG_INIT_EXCH

  4w0d: ISAKMP (0:20): package is sent to * (R) AG_INIT_EXCH

  4w0d: ISAKMP (0:20): received packet of * (R) AG_INIT_EXCH

  4w0d: ISAKMP (0:20): phase 1 package is a duplicate of a previous package.

  4w0d: ISAKMP (0:20): retransmission due to phase 1 of retransmission

  4w0d: ISAKMP (0:20): retransmission phase 1 AG_INIT_EXCH...

  4w0d: ISAKMP (0:20): retransmission phase 1 AG_INIT_EXCH...

  4w0d: ISAKMP (0:20): incrementing count of errors on his: retransmit the phase 1

  4w0d: ISAKMP (0:20): retransmission phase 1 AG_INIT_EXCH

  4w0d: ISAKMP (0:20): package is sent to * (R) AG_INIT_EXCH

  4w0d: ISAKMP (0:20): received packet of * (R) AG_INIT_EXCH

  4w0d: ISAKMP (0:20): phase 1 package is a duplicate of a previous package.

  4w0d: ISAKMP (0:20): retransmission due to phase 1 of retransmission

  4w0d: ISAKMP (0:20): retransmission phase 1 AG_INIT_EXCH...

  4w0d: ISAKMP (0:20): retransmission phase 1 AG_INIT_EXCH...

  4w0d: ISAKMP (0:20): incrementing count of errors on his: retransmit the phase 1

  4w0d: ISAKMP (0:20): retransmission phase 1 AG_INIT_EXCH

  4w0d: ISAKMP (0:20): package is sent to * (R) AG_INIT_EXCH

  4w0d: ISAKMP (0:20): retransmission phase 1 AG_INIT_EXCH...

  4w0d: ISAKMP (0:20): incrementing count of errors on his: retransmit the phase 1

  4w0d: ISAKMP (0:20): retransmission phase 1 AG_INIT_EXCH

  4w0d: ISAKMP (0:20): package is sent to * (R) AG_INIT_EXCH

  4w0d: ISAKMP (0:17): serving SA., his is 2E431DC, delme is 2E431DC

  4w0d: ISAKMP: Unlocking CONFIG struct 0x2D5ABE8 return of attributes, count 2

  4w0d: ISAKMP (0:0): received packet of * (N) NEW SA

  Any help would be greatly appreciated and please, be gentle, VPN is reletivly new to me.

  Thanks in advance.

  Have you recently changed your modem connection settings?

  Maybe your remote access provider is filtering something you need?

• Can someone get FileSelectPopuEx and WMI calls to CoInitializeEx / CoInitializeSecurity to coexist in the same code?

  I'm having a problem to run the attached code, which in an ideal world, would allow me to access the hard disk on the host PC serial numbers and use the FileSelectPopupEx function in any order.

  It seems that as soon as I launch FileSelectPopupEx (even by cancelling) the disc code stops working. There will be mistakes retrun to CoInitializeEx run from the same thread or CoInitializeSecurity run from separate threads.

  Based on aid for the 3 functions, it's probably that the error is caused by the mode of apartment for pieces of code. With WMI needing an MTA and the FileSelectpopupEx that need to be threaded in a single compartment. The FileSelectPopupEx suggests executes in a separate thread to avoid conflicts. I tried this, and unless I have that messed up, separate threads did not fix the problem.

  Since I never plan on the implementation of these components at the same time, it would be quite 'Cancel initialization' environment variables set FileSelectPopupEx after each instance in my case. Unfortunately, I'm at a bit of a loss on the bits to switch.

  Regarding the attached code, I tried to run in the two CVI2012 SP1 (32-bit and 64-bit) and CVI2013 (SP1 (32-bit and 64-bit) with identical results. If you want to re-create the link of a few questions for the following static libraries from lib SDK for CVI: ole32.lib, propsys.lib, Ole32.lib and WbemUuid.lib.

  I discovered that the code 'error' in this case was just a warning that was already called CoinitializeSecurity. The code is equal to RPC_E_TOO_LATE and can be swallowed with the following slight change to the code provided.

  If (FAILED (hr) &!) (HR) IS RPC_E_TOO_LATE))

  Sorry for the bug world.

• How can I get this Javascript to work under IE

  Here is the code.  It works perfectly in DW, but not in IE.  What changes do I need to make to make it functional in IE?

  Thank you.

  <!DOCTYPE HTML>
<html>
<head>
</head>
<body>
<form>
    Invoice Payment:  <input type="text" name="InvoiceAmt"  id="InvoiceAmt" size="20" maxlength="30" />
    Payment Amount:  <input type="text" name="Chargetotal" id="Chargetotal" size="20" maxlength="30" />
</form>

<script>
    document.getElementById("InvoiceAmt").addEventListener("keyup", invoiceAmtKeyup, false);

    function invoiceAmtKeyup(e) {
        document.getElementById("Chargetotal").value = (+(e.currentTarget.value)*1.05).toFixed(2);
    }
</script>
</body>
</html>

  My thanks to Kenneth Kawamoto for the above code.


  IE8 and earlier do not support the addEventListener method. The following change should work in all browsers:

• How can I get javascript to work with version 18 - all boxes checked but still problem

  I have WINDOWS 8 (for 2 weeks), Firefox v18. I try to use a banking site that requires javascript, but when I try to use the site, I get "javascript not working (or available).
  If I go into Youtube, any video that I take is unable to run - instead I get Flash video screen
  I put active Javascript but not difference.
  can someone point me in the right direction.
  I've reloaded Firefox and reset problem persists

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• Can someone please tell me how to get my back Bookmaks?

  Hello

  I had to reboot my laptop then had to reinstall Firefox, now I've lost all my favorites.

  Can someone please help me get back MY bookmarks?

  Thank you

  Al

  I don't think you can get back them now, but you should save them the next time.

• I used to have a box with the letters/folder called "All messages" - I do not have. Don't know what happened to her - I guess I could have deleted by accident? Can someone tell me how to get it back? Thank you

  I use the MAIL function on my MacBook Pro. I used to have a box with the letters/folder called "All messages" - I do not have. Don't know what happened to her - I guess I could have deleted by accident? Can someone tell me how to get it back? Thank you

  What do you mean 'all messages '? all mail entering, or email any or all all. ?

• IMac ongoing enforcement if slow takes like 5 min to open the page if it opens even, I don't know what or how to get rid of the things that is what actually happen how to clean what should be cleaned as all these extensions, please can someone explain ste

  I'm no computer expert and cannot afford to have my iMac cleaned. I don't know what to clean or how to do it.  I have extensions that I don't know which ones to delete, things like that, not sure what flash player I need or does come with your old iMac 2007?  I have Adobe who is good or bad but there are a few other does not say what I really should use.  I hate feeling so stupid and for the past 3 days, my computer works so slowly takes good 5 min to open a page opens it sometimes say oops error, waited for a long time, I even guess.  I don't know how to fix or what I should be getting rid of or keep.  I finally get rid of all the caches, just took a chance, still no improvement.  I have never on this point but can't afford to get whatever it is, I need to back up.  So please, can someone help to shed light on this point, what to delete it so my computer can run like he did?

  Thank you very much

  Sandie

  EITHER back up front what!

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• My navigation bar has been accidentally closed (file, tools, refresh, and stop buttons, address bar, etc.) and now I can't get it back. I tried pressing F11 as someone suggested, but nothing happened. Please notify.

  My navigation bar has been accidentally closed (file, tools, refresh, and stop buttons, address bar, etc.) and now I can't get it back. I tried pressing F11 as someone suggested, but nothing happened. Please notify.

  Use the ALT key on the keyboard if you can't see the menu bar, then

  • View-> toolbars-> and select'Navigation bar tools "(and the Bar Menu)
  • See the Navigation buttons such as back, home, bookmarks and recharge are missing

• I just signed up for offers on request.  I received on my iMac, but don't know how to get it on my Apple TV.  Can someone advise?

  Can someone advise me on how get Opera met at the request of my computer to Apple TV?  I have Netflix and many other sources which works very well.  I can receive puts it on demand on my computer programs but I don't know how to connect to Apple TV.  I'm sure it's simple, but I am at a loss.  Help would be very appreciated.

  You need reflect your Mac. Use Native requires a Mac OSX 2011 10.8 or later running or later version. The alternative is to use a program like Airparrot. If you have a 4th gen ATV and app is available, then there is also the option to install it directly.

• can someone tell me why I can't update to El Capitan 10.11.2? the line "Show details" gets up and I click on it to make the update. When I do this, it just goes back to doing nothing, so I can never get past this point.

  can someone tell me why I can't update to El Capitan 10.11.2?

  When I try to update "updates available have changed" guest shows up.i click "Show details" prompt to complete the update and when I do that, it just goes back to doing nothing, so I can never get past this point. can someone help me with this, please?

  Thank you very much.

  In some cases, this error message is caused by a problem in the network. Restart your router as your device at wide band, if they are separated. If there is no change, see below.

  This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data and read this message before doing anything.

  Triple-click anywhere in the line below on this page to select this option:

  /var/folders/zz/zyxvpxvq6csfxvn_n00000s0000068

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.* file should open with a selected subfolder. The subfolder has a long name beginning with "zyx" and ending with "68". Place this subfolder in the trash. Do not move other subfolders with similar names. You may be prompted for administrator login password. Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• I'm trying to stream a DVD playing on my iMac through my ATV3 - all I get is audio but no picture.  Can someone please?

  I'm trying to stream a DVD playing on my iMac through my ATV3 - all I get is audio but no picture.

  Everything seems to be fine as Photos, music and home movies etc, which all are thinner, it's just the DVD playing in the slot of the iMac.

  Can someone please?

  DVDs have been blocked since mirroring due to copyright

• Hi there is a balance of $20 showing on my Itunes account, however I don't seem to be able to use it to download a movie to rent.  Can someone tell me please how to get this balance...

  Hi there is a balance of $20 showing on my Itunes account, however I don't seem to be able to use it to download a movie to rent.

  Can someone tell me please how to get this balance...

  What happens when you try to rent the movie? If you use a family sharing and that you are the family Organizer so you won't be able to use your balance.

• My coprocesser needs a driver, it does not have a pilot. Can someone tell me how to get one?

  My coprocesser is not a driver; Can someone tell me how get/download a driver coprocesser?

  Hello:

  The driver that you need to (re) install that would install the coprocessor device would be the driver for chipset on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75757-1&cc=us&DLC=en&LC=en&OS=4062&product=3860051&sw_lang=