can't burn a dvd using windows dvd creation

Similar Questions

• I can't burn a CD using Windows media Player.

  I could already burn music to CD, but now it says when I try to burn a playlist to connect a device. I looked on the peripheral and CD-ROM/DVD-Rom Manager files and there seems to be a problem. I double-clicked on the file who is descended from CD/DVD files and it says that the device cannot start (code 10).

  Thank you

  See if this Microsoft FixIt can help you... Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  t-4-2

• I can't burn a CD with Windows Media Player.

  I can't burn a CD using Windows Media Player. I use a Sony CD - RW 700 MB and the latest version of Windows Media Player.  My computer recognizes it as a blank CD, I can create the playlist to burn and when I hit the button to burn, Windows goes through the motions of burn the disc, but when I re-read the disc, there's nothing there, it's always a blank disc.  The same thing happens with itunes.  I tried to use a blank Memorex CD - R disc, but my computer will not even recognize it.  I burned the disks before using Windows Media Player.    Help?

  Hello

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
  themselves at the start because they will be competing for resources. This does not mean that this issue has been
  caused by those, however, it's a possibility depending on which and how many you have installed.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• can I burn a dvd 2.3:1 using windows dvd create? __

  can I burn a dvd 2.3:1 using windows dvd create?

  I don't see how to make 16:9 and 4:3. If I had a divx file that was 2.3:1 How could I burn and keep proportions?

  Hi snmkelley,

  Windows DVD maker cannot accommodate proportions 16.9 and 4.3.

  For more information please visit the link below.

  http://blogs.msdn.com/deanro/archive/2006/11/14/Windows-DVD-Maker-and-aspect-ratios.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't burn a DVD in Windows Movie Maker

  Original title: DVD burner

  I just started using Microsoft Windows Movie Maker and not able to burn a DVD.  Can you help me find the right DVD burner software?

  Hello

  ·        What happens when you try to burn a movie using Windows Movie maker? You get an error message?

  I suggest you follow the steps mentioned in the article below.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I burn a DVD in Windows Media Center with the closed captioning information included?

  I recorded a program in Windows media center.  When I read the program, it displays the closed captioning information.  If I burn a DVD program closed captioning information do not display during playback.  How can I burn the DVD to include captioning?

  Hello
   
   
  1. How do you try to burn the DVD? You have saved the DVD on the desktop (hard drive) or you burnt before you save it to a DVD?
  2. after are burning the DVDs in which application you trying to play?
  
  I suspect that the captions are already burned in DVD, at this point in time we can cross check if the option is set to display captions.
  To enable or disable subtitles for DVD
  a. on the Windows Media Center start screen, navigate to tasks, click settings, click DVD and then click subtitle.
  b. click the plus (+) and minus (-) buttons to select power off or when cut, and then click Save.
   
  For more information, refer to the article below.
  Show captions or subtitles in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-closed-captions-or-subtitles-in-Windows-Media-Center
  See also the belowl link:
  http://Windows.Microsoft.com/en-us/Windows7/turn-on-full-screen-mode-and-closed-captions-in-videos-on-the-Windows-website
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Make a mistake 99% encoding when burning to disc using Windows DVD creation

  Original title: DVD burn problem

  When I tried to burn my movie using windows dvd, it was encoding and reaches 99% and said error occurred, could not burn disc, I used and the .avi format, what do I do?

  Disable all filters can be worth a try...

  See the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll down for...) What to do in case of problems)

  Also... the following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Ulead, etc... but at least it is a start.

  Good luck.

• can I burn a dvd using quicktime 7 pro?

  can I burn a dvd using quicktime 7 pro?

  N °

  (137641)

• I use IMOVIE. I had to project with mini videos. I can't burn a DVD. I have DVD creator, I can't find the project. How can I do?

  I use IMOVIE. I had to project with mini videos. I can't burn a DVD. I have DVD creator during its use, I can't find the project. How can I do? I made in IMOVIE I force see where and how I can save the project

  I have an IMAC

  Hey fradel,.

  Looks like you need to export your movie, so you can burn it to a DVD using the DVD Creator Application.  Back on how to do it.

  Now I'm not sure what version of iMovie you use, but take a look at the links below for the steps to export the videos to your computer. Then you should be able to see those newly created files on your DVD Creator application.

  This first link is for the latest version of iMovie and the following link is for the previous. If you have a different version of let me know.

  iMovie (2013): export a QuickTime file
  https://support.Apple.com/kb/PH14734

  iMovie 11: export your videos in a folder from the Finder
  https://support.Apple.com/kb/PH2285

  Take care

• my laptop stop save my movies for windows and I can't burn a dvd eithier

  my laptop stop save my movies for windows and I can't burn a dvd eithier

  Hi handyman6810,

  Can you give us more details about your film, about saving?

  For your problem of DVD burning, you can also take a look at the article with information here.

  Thank you!

• How can I burn a dvd in my player? ity all does is audio cd or data dvd. I need to add something?

  + im trying to burn DVDs that ive downloaded and all I can do is burn audio CDs and data DVDs or CDs. is there something I m missing to get movies to burn on a regular dvd. I'm using dvd - r discs

  + im trying to burn DVDs that ive downloaded and all I can do is burn audio CDs and data DVDs or CDs. is there something I m missing to get movies to burn on a regular dvd. I'm using dvd - r discs

  ===================================================
  Have you tried Windows DVD Maker?

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

  Also... the FreeMake Video Converter freeware can
  Easily burn a DVD-video. :

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7 / 8)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  Freemake free Video Converter - how to burn video DVDs
  http://www.Freemake.com/how_to/how_to_burn_dvd_video

• I have a video which is 51 minutes long but 8,34 GB how can I burn a DVD video which is only 4.5 GB 120 min

  I have a video which is 51 minutes long but 8,34 GB how can I burn a DVD video which is only 4.5 GB 120 min

  I have a video which is 51 minutes long but 8,34 GB how can I burn a DVD video which is only 4.5 GB 120 min

  =================================================
  Shouldn't be a problem... DVD-video is encoded based on the duration
  and not size. 51 minutes is well within the boundaries of a 4.7 GB DVD.

  Try DVD Maker if the video format is compatible:

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

  If this fails to do the job... the following freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Free video converter Freemake
  http://www.Freemake.com/free_video_converter/
  (Windows XP/Vista/7)

  Freemake free Video Converter - how to burn video DVDs
  http://www.Freemake.com/how_to/how_to_burn_dvd_video

  Good luck...

• I've never owned yet. I have trial version of first CC. How can I burn a dvd?

  How can I burn a dvd in first pro cc?

  If I understand correctly, due to licensing issues, yet is not available with the trial version.

• still not entering the first CC of the Cloud, how can I burn a DVD

  still not entering the first CC of the Cloud, how can I burn a DVD?

  See: http://forums.adobe.com/thread/1238080?tstart=0

• I can't burn a DVD widescreen

  In Pr 5.5, I can define what I want via file > export > media, and then by selecting "format": mpeg2dvd and a "preset" of "ntsc widescreen H Q. and then specify 1.2 pixel aspect ratio. This creates one. File M2V (which I can't find it). How can I burn a dvd from this?

  "" If I try to burn a dvd in Encore, it ignores the above information and all it allows me to do is to burn 4 x 3 dvd that distorts (squishes) my ' widescreen ' 1920 x 1080 images which are not attractive.

  OK, if you define your Export to SD card and found the files, import the M2V in again as a timeline and then import the WAV as an asset. From en project Panel, drag the WAV to the timeline (if you have several), where it snap into place. Let him. XMP file. Which should help you to create again.

  Good luck and sorry that I missed the settings for your MPEG export. My bad.

  Hunt

• Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista an

  Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?

  Error 1935. Assembly Microsoft.VC80.CRT component | Install | Adobe Creative Suite 5.5, CS5, CS4 | Windows