C309a paper in the main tray

Similar Questions

• Photosmart D7560 do not print envelopes-> load paper into the main tray

  My photosmart D7560 h will not print envelopes, after having moved the envelope position for printing, the message "loading the paper in the main tray is displayed.  It prints correctly the data of envelope on a sheet of paper 8.5 x 11.  The Setup is for a #10 envelope.  Envelopes are self-sealing.  I tried to crease the edge better but that did not help.  I tried a non-self seal (who had a top letterhead so I couldn't use it for this shipment) and he worked.  Is it possible to do self seal envelopes work in this printer?

  You have the flap folded inside the envelope, so that it does not stick?

• HP Photosmart more B210e - no more paper - load paper into the main tray

  
  

  Hey fanblade,.

  Thanks for the detailed post describing the problem you are experiencing.  Looks like that paper inside the printer sensors have a problem with the detection of the paper in the tray.  This may be due to rollers be dirty and unable to take the book, settings problem or possibly an electrical problem in the unit.  I recommend the steps in the document below.

  "Out of paper" Error Message and the printer is not looking upwards or the paper feed

  I would like to know how it goes as I steps to perform a factory reset on this printer,

  Jason

• Photosmart 7525: photosmart 7525 photo tray - how to get the photo tray to use instead of the main tray

  I use a computer from Dell using Windows 8.1 desktop 64-bit.  Printer is HP Photosmart all-in-one 7525.  The software is Microsoft Picture Manager.   I want to print a photo .jpg of MS Picture Manager for paper photo 4 x 6 I have loaded in the photo printer paper tray.  The problem is that printing is still trying to main paper tray in the printer.  Remove all paper from the main tray just causes the print operation to not to say that the main paper tray is in the paper.    If the main tray contains plain paper, the photo printed on this paper.  I have the printer set up to use the photo tray.  I select HP 4 x 6 paper in MS Picture Manager and also set Picture Manager to the highest print quality.  But no mater what I tried, the printer selects tray to main paper rather than the smaller photo paper tray.  The printed image is 4 x 6, but it is printing on paper of the main plate.  What I am doing wrong?

  Well - I found that among the pop ups related print had a link 'options' that seems to indicate that it could be me trying to change things which were not suitable for my printer - so I didn't click the link.  So this time I didn't click the link and he showed me up - again - to set the s/w to use the photo tray.  So I did and the photo made print from the photo rather than the main tray tray.  So now I know how to do and don't need to mess with trinkets or all other signs, you've shown me.  Thank you for taking the time to try to help me.  I appreciate your help.  CR

• HP ENVY 7640 all-in-one: print envelopes and its telling me to load paper into the photo tray

  I am trying to print envelopes on the HP ENVY 7640 printer and it tells me to load paper into the photo tray. Have you encountered this problem and how to solve? Thank you.

  Hey @cmm3,

  Welcome to the Forums of HP Support!

  I understand that you have a problem when printing envelopes from your Windows 7 computer to your HP ENVY 7640 e-all-in-one printer. I would like to help you today with correct this print error "Photo tray". To start I have to make sure that the envelope is correctly loaded in your troubleshooting paper tray. Once you have confirmed that your envelope is loaded OK we'll take a look at the envelope to print on your computer settings. Can I please you follow the steps below.

  Step 1: Load the paper:

  To begin troubleshooting, please click here. Once the support document opens, please select the drop down list for "load envelopes. Please see the instructions on the screen to ensure that your envelope is correctly loaded in the paper tray. Once you have confirmed that your envelope is loaded correctly, proceed to the next step.

  Step 2: Check the print settings:

  Below I will provide you with instructions for printing envelopes per word. You should use a different program on your computer to print envelopes, please respond to this post with the program that you are using so I can provide specific measures.

  1. Open Word and click mail merge to top
  2. Select "envelopes" in the upper left side
  3. A page of envelopes and labels should now open. Enter your delivery and return address.
  4. Select 'Options' on the lower right
  5. Under the tab 'Options for envelopes' to ensure that your envelope is correctly selected.
  6. Select the 'Print Options' tab at the top. You must now select as appropriate feeding method for your product.
  7. Make sure that you choose the option "Face down".
  8. Also ensure that 'right-hand Rotation' is selected
  9. At the bottom of the window, select the drop-down list of pet food
  10. Make sure that the feeding method is set to main tray rather then select automatically
  11. Press 'OK' and 'Print'.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Photosmart premium will not print from the main tray

  I have a HP Photosmart Premium.  It won't print or copy from the main tray.  Despite the fact that I specifically designated main tray settings, he continues to try to print from the photo tray. How can I fix it?

  My recommendation would be to define the default values for what you do most often.  You can assign the parameter of the bins to automatic and the printer should draw the correct tray based on the other parameters of size and type of media.  If you experience problems with the automatic selection of tray for a particular document or a picture, you can specify the drawer wished for this print job.

  I'm a link the User Guide for your printer.  Click here  I thought you might find useful.

• Photosmart 6520 does not print to the main tray

  I'm trying to print a PDF file which is the letter format.  The printer says its printing on the main tray preference, yet the printer continues to try to print by using the photo tray.  How can I get it to print on the main tray?

  Hey @flowerchild22,

  Thanks for getting back to me on that.

  It is this problem with the main tray only with the 1 PDF A4 format you are trying to print. In other words, all other programs print correctly?

  What program you print PDFs through?

  If you use Adobe, try to go to:

  1. Click on file
  2. Click on print
  3. Click on advanced
  4. Choose 'print picture '.

  Please let me know if it's just a single PDF file or if it is the case with other PDF files and other programs. Good luck!

• How can I route printing jobs for the main tray instead of the photo tray?

  If I send a mail with an attachment JPG to the e-mail address of my printer, it will always try to print it by using the photo tray. I guess he assumes simply because it is an image file, happened to print using photo paper. Although it is not a bad assumption, it is not necessarily what the user wants. I was wondering how I could implement the ePrint to control which tray to use for printing the attachments of the image files. Thank you.

  PS My printer is Photosmart 7520.

  Hello

  At this point, you will not be able to do so through ePrint. Please also read the following post:

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile-printing-and-ePrintCenter/eprint-attachment-tray-selection/TD-p/2729103

  Kind regards.

• Select tray 2 as the main tray for all functions

  I use the top tray for odd size media and want to set the lower plate (#2) in the Lac main for all functions presented. How this is done on my Officejet Pro 8600 Premium?

  Hello

  This can be done in the control panel of the printer and printing software

  To set up the trays

  in your PC

  1. you must select the option Auto tray in the printer software. If the printer is on a network

  and you set a default bin, the setting affects all users of the printer.

  On your printer

  1. make sure that the printer is turned on.
  2. tap (right arrow), press Setup, tap preferences and then select default
  Tray or tray Lock.
  3. click on OK or apply after changing settings of the desired tray.

  Above measures avaialbe in the manual, please see page 32 in http://h10032.www1.hp.com/ctg/Manual/c03026243.pdf

  Good impression

• OfficeJet 7612: Customer size of paper in the Photo Tray feeding

  Hello, I'm at my breaking point, trying to get my printer to print on an envelope of 4.75 "x 6.5". It was working fine until I tried to print another batch the next day, then I continued receives "paper mismatch" errors as well as the printer would try to power on the picture for a reason Board any. I already did the following:

  -J' tried 2 versions customized with overturned dimensions of paper sizes. None worked.

  -Configure the printer to read my custom paper size and also put up on the menu print autoadjust the paper to the dimensions of my new size.

  -Reset my printer, it takes off my network wifi, readded and even reset my documents.

  All other tips would be appreciated, I'm running on a Mac. Thank you!

  Hi bgeyvandova, I suspect this problem may be related to your printer firmware, although there is some other explanation that fits your problem.

  HP offers several measures to help solve the paper mismatch error: LINK

  If you try to update your firmware, you can do it here: LINK

  Please let me know if this, or the guide helps you solve this problem. Thank you!

• OfficeJet Pro 8600 not giving orientation options when printing photos from the main tray

  Greetings, all.

  I searched this issue, but I have not found anything, so this is:

  I have an OfficeJet Pro 8600 911 and an iMac (21.5 inch, end 2013) running OS X 10.9.2 Mavericks.

  The problem comes when I try to print a photo 4 x 6 from the main drawer - in the print dialog box, the image is oriented the wrong way on the preview. No matter if I rotate the image or not, it does a perpendicular orientation. In the print dialog box, there is no orientation option to change from portrait to landscape or vice versa, even if

  I checked the software update of the Mac and the Pro 8600, but there is nothing available.

  I am pleased to learn that the Preview will allow you adjust orientation, at least, we know that this is possible. Apple is the one controlling the features such as that within the application. Click here: view contact information of apples. Apple Support Forums are also available here:

  Kind regards

• Printer HP (photos in the little tray)

  I get an alert "in the paper" on the screen of the printer even with the photo in the little tray paper (there no paper in the main tray) how do I get it printing from paper tray (photo)?

  Hello

  You must choose the Photo paper tray before printing. What is your printer? Where did you ptint of? Please read the following article, then post back:

  http://h30434.www3.HP.com/T5/first-time-here-learn-how-to-post-and-more/advice-for-asking-the-quot-very-best-question-quot/TD-p/83280

  Kind regards.

• HP Photosmart, 7525 how to print photos from iPad to use the main paper tray.

  I have pictures of troubled impression of the main plate. He continues to try to use the smallest. Photo tray
  I tried selecting the main tray by default and will not work.
  With the help of hp photosmart 7525

  Hello

  If you use AirPrint, the default setting is to use the photo for the photo tray and the main tray for all other printing. AirPrint allows very little flexibility in this regard.

  To increase the flexibility around paper selection and the plateau, you will need to download the HPe-Print application on the app store and use it.

• ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.

  ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.

  We recommend that you reset your C510 HP first. You can perform the reset by following the steps below:

  1. press the "Power button" to activate the product.

  2. with the product, unplug the power cord from the back of the product.

  3. disconnect the power cord from the wall outlet.

  4. wait at least 15 seconds.

  5. plug the power cord into the wall jack.

  6. reconnect the power cord to the back of the product.

  7. If the product does not light by itself, press the Power button to turn it on.

  Once done, print a self-test report by following the next steps:

  1 load plain white paper in the input tray.

  2. from the home screen on the control panel of the product, click "Menu" on the upper left side. A list of menu options screens. 3. click on "Settings" and then click on 'tools '. The maintenance of the printer menu displays.

  4. in the maintenance of the printer menu, click "Printer Status Report". The product prints the report.

  If the report is printed correctly, try again to print your original document.

  If the problem persists, you may need to check the status of documents in the status bar. To do this, follow these steps:

  1. remove the stack of paper from the status bar.

  2. check that the obstacles within the status bar. A flashlight to view the mechanism inside the status bar to make sure that nothing is blocking the paper to engage with the rollers. Even small pieces of paper can cause paper feeding problems. (Important: If any obstruction is detected in the paper path, you need to refer to "Cleaning the rollers" segment at http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken)

  3. to review the status of the paper and then replace any paper torn, dusty, curled, wrinkled, or bent.

  4. ensure that all the papers in the stack are the same size and type. Never charge which coexist types of paper in the tray. The product can only process one type of paper at a time.

  5. press on the stack of paper on a flat surface to align the edges.

  6. make sure that the paper stack does not contain less than 10 and not more than 25 sheets paper.

  (Note: the limitation of the number of documents applies only during the phase of solving problems.) Once the problem is resolved, you can load the tray to its original capacity).

  Once you have checked the status of documents, reload the tray in the following way:

  1. lift output in open position and open the door of the feeder.

  2. slide the width guide to its outermost position paper.

  3. Insert the stack of paper into the paper tray with the short edge forward and the print down side.

  4. adjust the paper width guide so that it rests against the stack of paper.

  5. lower the output tray, and then close the tray door. Once this is done, print again an automatic test report by following the above steps. If this too does not resolve the issue, refer to some more solutions at HP support center link below: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  GuruAid.com

• I have a HP photosmart printer. I have problems printing of documents. I get a message that I have more paper. However, there are paper and the tray is installed properly. What can I do?

  I have a printer HP photosmart Plus B209. my pc is communicating with my printer but the printer will not print because it repeats me more paper. However, the tray is properly installed and loaded paper. I unplugged my printer and plugged back in nothing works. All boards

  Hello

  1. What is the full/exact error message?

  2. who is the operating system installed on the computer?

  A supply of paper problem can occur for several reasons, such as rolls of papers dusty or contaminated, the condition of the paper in the tray, or even problems with the software.

  You can run the troubleshooter and check.

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: You can change the operating system that is appropriate in the article.

  See also the steps from HP article:

  HP Photosmart Plus (B209a, B209c and B209b) all-in-one printers - all-in-one not picking up or feeding of the paper in the Photo tray

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3777155&prodTypeId=18972&ObjectID=c02156652

  Hope this information helps. Response with status so that we can help you.