Can't change an editable region

Similar Questions

• Can spry menu cause editable regions?

  Hello. I have two questions menu spry that I hope someone can answer:

  1. I use a horizontal menu spry in my template for my navigation bar (pictured below). But I would like to make the "Menu" tab Middle an editable, so that I can change its destination of links on certain pages of the subsites. Is this possible? I tried to insert an editable region in the spry, but Cree Dreamweaver warnings against me and, when I went anyway, the navigation bar broke out on my pages.

  

  2. I want to only the 'Previous' and 'Next Page' tabs to display on some subpages (and maybe to hide tab "Menu" way). I do not think that an optional region will work in the spry, so I tried just type the new tabs on each side of the menu spy. But, once again, Dreamweaver got mad at me and broke my navigation bar.

  Any suggestions on how I can either work around? Or sprys are not otherwise flexible? I was wondering if I could create two different navbars and make the two optional regions, but still, I don't think it's possible.

  Thanks to all those who can help you.

  Hmm.

  I've never considered part of an editable Spry menu bar, but you can do it. Simply ensure that you delete it or don't overlap the necessary code, and I think the submenus will be problematic.

  When you want to change a menu item, do it in code view, and then select all the contents of the list item:

  Point 1.1

  This way, you will be able to change the link and the text of the item...

  If Dreamweaver warns you that you are working in a block element, don't you worry about this. You know, and it won't hurt anything in this case.

  There will be other ways to build local versions of the menu. If you need the submenus, you must remember to add some class designations, which you certainly can do it if you're careful. I personally would opt for several different menus controlled from the style sheet. It would be a bit more complicated, but then you don't have to remember to go to all the pages to set the menu. I don't know your project, so I couldn't say if it would be a great loss of time or useful. If you were to use the same menu on several pages, it can be useful. If each page is different anyway, make your way!

  In addition:

  I did a modifiable menu item and the code looks like this: each editable region will have its own name.

  Point 2

  Beth

  Post edited by: Zabeth69

• Cannot change the editable regions-

  Hi people,
  
  I don't even know what to look for, so if this was taken over by all means please tell me here!
  
  Running on OS 10.4.9 DW8. I use templates in the redesign of the customer, and I implemented a region repeated inside a DIV. My problem is that when I change a file having this model, my cursor gives me the 'no sign' (circle with slash) when I fly over this area. I can change it in the Code and split mode, but I can't click the repeat region to add another element.
  
  This happens from time to time and I just did my work in Code view, but this time I need to click on the little sign of the repeat region to add a box in Design view.
  
  Is this a bug? Is there any solution for this?

  Hi Murray,

  I wish it was! Just a simple old DIV for a sidebar. As I was about to demonstrate by copy/paste code here... when I found the problem! I had a few renegade living in the CSS code (margin-bottom:-9999px) and now that happened I can click in the editable again.)

  Thanks Murray! :)

• Can I change a locked region of a page based on templates?

  Hi all -
  
  Well, to cut to the Chase, I have a page that is based on a master template which no longer exists. I need to change the < title > attribute in the cephalic region.
  
  normally, I just open the main template for this page and change the < title > tag it. but, as I said, there is no longer the main template (the Moose model name has been changed, I think).
  
  I was hoping I could just correct this line to reference the master model current, correct. but I can't find a way to change this locked line of text. Unfortunately, the < title > tag was not in an editable region.
  
  does perform a work around, or do I have to rebuild everything this page by using the new correct model?
  
  

  Thank you Murray-it is exactly what I ended up doing.

  I just copied and pasted the editable code regions into a new master, then make some changes to css to get straight. has taken 5 minutes.

• Equium - How can I change the DVD region?

  even thought it says I have 1 more change available. I have a Pioneer DVD - rw dvrkd08a ata device and he tells me he needs a region 2 original disk and insert the disk and try again, but I just go around in circles.

  How to make that one final change from region t rear 2?

  Hello

  The DVD region is limited and can be changed to 4 or 5 times
  If the option is grayed out then that would mean that you have already changed this time view settings and now it is not possible to s more.
  In my experience it of not possible to disable this limitation

  Of course, there are a lot of different information about this and many people are trying to solve this problem by updating the firmware using a few pirates and unofficial software but I would not recommend this because it could damage the STRANGE
  In the worst case the ODD won't read and write Ant records

• Cannot change my editable region on the child page is grayed out

  I have a model. And on the pages of children from this I try to change the region of editabel ("name =" head) with a few metatags for Facebook, unique for each page, but it is grayed out.

  And I think it's strange spesial because the combo box ""name = "doctitle" is editable. "

  I'm working in Dreamweaver CC2015. Model comes from the Business Catalyst.

  What I am doing wrong?

  It is the code:

  < head >

  "" <!-TemplateBeginEditable name = "doctitle"--> < title > It's editable < /title > <! - TemplateEndEditable - >

  "" <!-TemplateBeginEditable name = "Chief"-> This is NOT editable and greyed out <! - TemplateEndEditable - >

  < / head >

  Please anyone who can help?

  If you have reviewed the file on the remote server and the code is in place, this is what will be sent to the browser. The fact that you have edited the child page outside of Dreamweaver makes no difference whatsoever. Dreamweaver template tags are simply HTML comments that start with InstanceBeginEditable or InstanceEndEditable. Dreamweaver uses comments internally to control what can or cannot be changed within Dreamweaver. According to browsers and web servers are concerned, they are simply comments that are ignored.

  It is possible that a proxy server is caching of your page. You could try renaming the page, download the renamed version and check that.

  The only other thing I can think is that you use a model of Business Catalyst. Business Catalyst is is more integrated with Dreamweaver CC 2015.

• Where can I change my peripheral region

  I can't find the news application after downloading the iOS 9.3

  Are which country you currently? The news app is currently available only in the United States, the United Kingdom and the Australia

• Nesting templates: child-model Pages does not fully to the Editable vs a-Editable regions

  Me kay, so first of all, it's all done within Dreamweaver CS5. How can I explain this, is that I have a series of Master-models for my site, then accompanied by child-models related to offshore of / nested my master-models. So far it's going wonderfully, until what I'm trying to make a page of one of my children-models.

  The page of my child-model accurately comment on an non editable (region in which is editable in the master model, but left as ONLY editable within the child-model) as long as I add an EDITABLE area it contains. In the circumstances I have DO NOT add an editable region in the editable area of the master model, the area within the Page is appearing always editable.

  For example:

  __________________

  Model Master:

  <!-TemplateBeginEditable name = "ChildTemplateCSSLinks"->

  Model child CSS links here.

  <! - TemplateEndEditable - >

  _____

  Child model:

  <!-InstanceBeginEditable name = "ChildTemplateCSSLinks"->

  Model child CSS links here.

  <!-TemplateBeginEditable name = "ChildPageCSSLinks"->

  Child CSS PAGE links here.

  <! - TemplateEndEditable - >

  <! - InstanceEndEditable - >

  _____

  The child page:

  Model child CSS links here. (Precisely appearing not editable - {editable area of the master model tags appearing exactly invisible})

  <!-InstanceBeginEditable name = "ChildPageCSSLinks"->

  Child CSS PAGE links here. (Accurately appearing editable)

  <! - InstanceEndEditable - >

  __________________

  It is a WORKING example of editable regions. In the child Page "Template CSS child links here." Appearing in comment and therefore not editable in the child Page, as if it was supposed to be. This time allows the 'child PAGE CSS links here' to be editable with PRECISION within the child-Page.

  Now for an example of what does not work:

  __________________

  Model Master:

  <!-TemplateBeginEditable name = "ChildTemplateCSSLinks"->

  Model child CSS links here.

  <! - TemplateEndEditable - >

  _____

  Child model:

  <!-InstanceBeginEditable name = "ChildTemplateCSSLinks"->

  Model child CSS links here.

  (As you can see, I've added an extra editable within the editable area of the master model. This is an area which is supposed not to be editable within the child-model and NOT the child-Page, which seems to be up to NOW accurate.)

  <! - InstanceEndEditable - >

  _____

  The child page:

  <!-InstanceBeginEditable name = "ChildTemplateCSSLinks"->

  Model child CSS links here.

  (For a reason, THAT as long as I DO NOT add an additional child-model - edit box in the editable area of the master model, this area is appearing ALWAYS visible but also editable in the child Page.)

  <! - InstanceEndEditable - >

  __________________

  So, in this circumstance, it seems that the only way I can leave ALONE the editable region of the master model can be changed within the child-model and NOT editable in the child Page is leaving an ADDITIONAL editable produced through the child-model somewhere within the editable region EVERY SINGLE, produced by the master model. Unless I do something bad, it seems this until a potential defect/bug in Dreamweaver CS5. I can't imagine how this would be correct, otherwise child/Nested-Templates would be not possible to do. What could I do it wrong? Is it possible that I can specify in the master model is an editable editable ONLY within the child-model and NOT yet child-Pages (A Page based on the template of the child)? Or maybe is it possible that I can specify the child-model that an area can be changed WILL NOT be editable in the child Page? Furthermore, no, I DON'T want to make "Optional Regions", so please do not suggest that.

  I know it's all probably a little confusing, but I hope the examples above more than descriptions aside. As you can probably assume, it is definitely a HUGE complication in my site if it does not end up being a solution, especially with all the time I put into making the child models, which I hope to rely on. It would be really silly if I had to script - in an editable region extra in each master-model-editable-region unique available within my child-model just so that I can update my child-model, in addition to my changes to my child-Pages, to fall as much as it would maintain the content that I never wanted to be editable in the child Page in the FIRST place.

  Some help would be appreciated sincerely, as soon as possible, if I could ask politely.

  Thank you. Sincerely,

  ~ Miss Cat

  = _ = I can't believe that I say this, after having written ALL that a period, but thanks to 'Dreamweaver CS5 for Dummies,' I just found out that if you place: @@("") @ in the editable area of the desired child/Nested model DO NOT passed down for your child-Pages, it won't appear not editable. God knows why such a discrete formula was the answer, but I guess that everything works. ... WHY WAS IT SO DIFFICULT TO FIND INFORMATION? @_ @ Information about nested templates in general seems quite hard to find, however, so I'm glad that I thought that this output /not/ never a full hour / after writing all this upward and detachment. #__#  ... At least my child models can work perfectly now, though. Then... FIXED scenario. ^^

  I hope that now this information will appear useful to someone else hunting for that information via Google or other search engine in the future. And if there is nothing at all that I'm still officially missing, then do feel free to add to food and let me know, because the last thing I need now of law are more surprising difficulties also slow down the productivity of this vast project I worked on... @_ @... But so far things seem to be going well. ^^ So I can just incredibly grateful that he will eventually be a solution to this ridiculous after all.

  Sincerely,

  Miss Cat

  [info promo signature removed by Moderator]

• Error in adding an editable region in the nested template header

  I have a basic model for the website (creation of main menus) and a secondary model using this basic model, which establishes a common table, on the one hand of the site layout. After you create the PHP to drive page, I need to lock this secondary nested region - otherwise any edit I make on my secondary & quot; -definition of table & quot; model is not passed to the last pages using the secondary model. I created a secondary edit box successfully in every part of the & lt; body & gt; region, and of course, it locks text outside the secondary editable help DW says it should. So far so good.
  
  Now the problem - I can not create a region inside the & lt; head & gt; combo box to lock this region too. Normally we'd like keywords and so on to be variable from one page to another, but as I am filling variable keywords from a database, it makes sense to lock the & lt; head & gt; Too much. Does anyone know why that generates an error & quot; failed to create an optional region here & quot;? Is there anything we can do about it?

  > by whom?
  This is DW CS3 help on nested models:

  A nested template is a template whose design and editable regions is based on another model. Nested models are useful for the control of content in the pages of a site that share many design elements, but have some differences between pages. For example, a basic model can contain broader design areas and be usable by many contributors of content on site, while a nested model can further define the editable regions in the pages of a specific section of a site.

  > the solution
  I just figured out how to lock the header in the document of reference to TechNote 16416. It is referenced in the called DW CS3 help page

  Prevent an editable region to a nested model

  In summary - insert the marker @@("") @ in the editable area.

  I tried it and it works perfectly! The cephalic region is now locked in the nested template, so the changes in this area went from child pages. That's the answer.

  > your book
  Yes, I saw it on Amazon. Kudos to you for publication.

  > your suggestion extracted
  Thanks for that. This looks like a more manual approach, however.

  > mysteriously missing paragraphs
  Very strange, I can see them on my screen in Firefox and IE7.

  Best regards
  Richard

• Editable region can only be changed in Code view

  I recently upgraded to CS5 and launched a new site today (first one I built from scratch in CS5). As usual, I built a model. In this model, I did two editable regions. The first is a div called PageContent. I did the whole div editable. It goes the same for the sidebar DIV. When I create a new page in this model I can change only the editable code view areas. I get the symbol "unauthorized" in Design view.

  The page is fully editable in CS3 in design mode.

  To facilitate the display of code from that page is http://Bryant.melanieadcock.com/index.html

  CSS is available at http://Bryant.melanieadcock.com/bryantstyle.CSS

  No idea... seems to be a software problem. I have updates.

  Melanie Adcock

  Try to comment the overflow: hidden in your CSS #wrapper

  /**overflow: hidden;**/
  

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• I can't change my region in the settings of the xbox

  I can't change my region of billing and accounts management coz im from Turkey and xbox does that.and I can't buy something because this... when I have edit personal information, it says 'bad post code type' how can I change it and buy something on the markets.

  Hello

  I suggest you to contact Xbox support center and check.

  http://support.Xbox.com/en-us/pages/Xbox-Live/how-to/Xbox-Live-account-management/manage-Live-ID.aspx

• Cannot change the meta name = description of an editable region

  http://thegreensolarcompany.com

  I initially (and mistakedly) created the model with just a description of name meta for all pages.

  Now, I tried to change that, so I can change the description of the page ecah individually using various methods, but every time I get a different number of warning/error messages.

  Can someone please help? (I know that this is a bit of a mess, I would also like to make editable keywords)

  The beginning of my model is as follows:

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  "< html xmlns ="http://www.w3.org/1999/xhtml">".
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  "< name meta ="keywords"content =" solar energy society, green energy, solar panel,.
  Solar company Sussex, surrey solar, photovoltaic solar panel installations, feed in tariff,
  MADE, renewable energy, solar energy, MCS, REAL, free solar, free solar facilities ">"
  <!-TemplateBeginEditable name = "doctitle"-->
  < title > Untitled Document < /title >
  <! - TemplateEndEditable - >
  < name meta = "description" content = "we are the leading company of green solar specializes in solar and photovoltaic panels.  We offer the best solution of solar installation for you.  We offer also Government subsidies and information and advice to MADE it.  Superior solar society for home and business facilities. "/ >
  < name meta = "norton-safeweb-site-verification" content = "ev0-v6slm6yd9wo84gbb951wtpos84zwv88f84zzzrmv4chy e-84vukldx6b7gbef2bfidyam1lpzykamla31ca86gr9or402ekj71-ezp5760zx4acn0abktm3ie2vk" / >
  < style type = "text/css" >
  <!--
  {.aral}
  do-family: Arial, Helvetica, without serif.
  do-size: 14px;
  text-align: justify;
  }
  ->
  < / style >
  <!-TemplateBeginEditable name = "head"->
  <! - TemplateEndEditable - >

  Thanks a lot for the help of anyone.

  You have two regions can be changed with the same name ('meta').

  Just start over and follow my instructions in the previous post.

• You can create a locked in an editable region?

  Hello

  I have a box that varies in length for each web page. -This article, I want to make it editable.  In the box, there are 19 references to other web pages on the site.  These references do not change from one page to the next and if possible I would like to locked.  If this feasible and if so, how?

  Thank you.

  Make sure the section in a server-side include or a library item.

  However, that's the answer direct to your question, no, you can't put a region locked in an editable region, however, you can split an editable region in two editable regions, separated by a non-editable area.

• How can I change the background color for the bar 'help file edit view history bookmark tools' in Firefox 29,0

  How can I change the background color for the bar 'help file edit view history bookmark tools' in Firefox 29,0

  You can add a theme of solid color to change the color of the top of the browser window, which contains the Menu bar.

  https://addons.Mozilla.org/en-us/Firefox/themes/solid

• What happened to the bar that says 'file, edit' etc.? How can I change the font size to display Hotmail? Where can I access 'Cancel '? Thank you-

  How can I access the toolbar which includes "file, print" etc.? How can I change the font size of my hotmail home page? It used to be using "display".

  In Firefox 3.6 and later Windows, you can hide the menu bar on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press F10 or press and hold the Alt key to bring up the menu bar temporarily.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select to show or hide toolbars (click on an entry to switch from the State).

  See also what happened to the file, edit and view menus? and http://kb.mozillazine.org/Toolbar_customization