Adding absence of steps to a label

Similar Questions

• Is it possible to add an extra step group?

  I would like to add additional groups of Step, in order to better organize my test sequence.  This would only be for purposes of Visual Organization and is not related to the call of subsequences.  I think that reports, as well as documentation would be easier to read if there was a way to separate the groups of sequences / in smaller sections.  I understand that this can be partially achieved by using the sequence of calls, but I found the data record is much more straight forward if I can keep the steps in order of higher level (I need not to pass the data through variables or parameters).

  Please let me know if this is possible, or if there are other suggestions for a better visual organization.  Thank you.

  GSinMN

  Unfortunately you can't add/remove groups stage.  You can only ever to have 3.

  However, you can use the step Label and hide the icon, name and status.  You can use several steps of the label to achieve certain look:

  No label to hide everything

  Label not hide everything except the name (the name will be description section)

  No label to hide everything

  You can also change the icon of the step of the label to help identify the section as well.

  Hope this helps,

• Custom step problem

  I have a number of custom steps (not inherited, no source code) that we use with TestStand 3.0 and 3.5 versions.  I'm trying to import them into TestStand 4.1, but I have problems.  I know that the location of the files has changed under TestStand 4.x.  They used to live in the TestStand folder, now they live in C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.1\Components.  I copied all the DLLs, INI, ICO, files in the correct folders, but some of the measures do not appear in the context menu when you add a step.  I have added custom, four steps two I have visible, two are not.

  The management mode that Custom steps has changed in the TS 4.1?

  Thank you.

  Have you added your pallets of type under C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.1\Components\TypePalettes?

  Your pallets of type and the types of step appear in the Palette of Document Type?

  You may also right-click on the palette to insert a step and choose Customize... to update where your step types appear in the Insert palette.

  Hope this helps,

  -Doug

• Step.Limits Set with ActiveX

  Hello

  I work on the development of a VI to create a TestStand sequence based on a set of inputs to an excel file.

  With LabVIEW, I was able to create a new file of sequence and insert a test "LabVIEW digital limit" in the sequence (VI attached for adding new digital step). I don't know how to take this additional numerical limits and put 'Step.Limits.Low' & 'Step.Limits.High '.

  Grateful if someone can let me know if/how this is possible.

  Thank you best regards &,.

  Don1

  PS: Please advise if I should have posted this on the set of LabVIEW.

  With the help of the reference step change for a reference of PropertyObject (Step.AsPropertyObject), then you can change the default values using the PropertyObject.SetValNumber using the search string for "Limits.Low" and "Limits.High".

• HELP Please!  How to merge and link A / V in one step?

  Hi guys,.

  Have a quick question.  I'm passing FCP7 in Premiere Pro (latest version).  I'm a Publisher so speed and ease of use is really important to me.

  Essentially in FCP7 when I link an element and drag it in the bin area, it creates a new, related clip which I then rename.

  If I'm understanding right, the equivalent in Premiere Pro is to merge a clip.  But whenever I drag a clip merged into the timeline, it is not linked (I can't click on the audio or video and highlight the entire clip merged, but instead, it highlights just the respective track I clicked).  For me, in terms of speed, it is pretty useless if my merged clips are not related.  I talked to friends who use the first, and their workaround is to simply "link" a merged clip whenever they drag a new selection in the timeline.  But who is adding a new step and I am still pulling very fast clips and wouldn't bother with it, if possible.

  I have to imagine there is a faster/easier way for me to merge a clip and then be bound at the same time.  Even if I connect an A / V follow together and drag it in the bin area and merge it, the merge process clips will be actually UNLINK the clips.

  I am making sense and nobody knows if I am able to create a new clip out of a bound element OR merge clips and ask them to be bound at the same time?

  Thank you

  Sheridan

  Clips merged not be related in a timeline sequence, is a known (as Jim mentioned) problem and I hope to fix soon.

• Adding objects to the stage & amp; Properties of the acceessing Stadium - I'm a bit confused...

  Hello
  
  I'm a bit confused about the programming of the display's two-pronged:
  
  A. What are the best way to add objects to the stage?
  B. how to access the properties of the step.
  
  I can make these two when the project is a 'Action Script Project', but I have a problem when it is a "Flex project" (for example a MXML file). See the attached files two questions included in the commentary to see exactly what I mean.
  
  
  A. What are the best way to add objects to the stage?
  =====================================
  
  In a project of action script which extends Sprite I can call him addChild()
  
  In a project MXML I add objects to the scene first, adding them to a UIComponent, then adding that the step.
  
  1 - is the best way to do it?
  
  In this doc: http://livedocs.adobe.com/flex/3/html/help.html?content=05_Display_Programming_02.html he says this quote from

  :
  Each SWF file has an ActionScript class associated with it, called the main class of the SWF file. When Flash Player opens a SWF file in an HTML page, Flash Player calls the constructor function for that class and the instance that is created (which is always a type of display object) is added as a child of the Stage object. The main class of a SWF file always extends the Sprite class

• Allocation of shares to the dynamically added buttons.

  Hello
  
  Here's my problem, I'm adding buttons to step execution and for the life of my I can't have shares in them to work. Now when I click the button nothing happens. Am I missing something?
  
  

  Well, it seems I've found the reason why. For starters, I dropped the whole thing look.

  What I was trying to accomplish was to choose an image that has been associated with the number of the button to say "image_1" has "button_1. So what I wanted was that when I clicked on "button_1", he would send the number to the showImage() function.

  NOTE: I discovered after a few hours I could just add the variable x in the function as in...

  this.adButton.onRelease = function()
  {
  showAdImage (x);
  }

  ... because it reminds the current value of x that would eventually be someNum. So FYI, call events will call the current values of all variables.

  SO MY SOLUTION...
  The way I had the time it was simply call the name of buttons with "this" and turn it into a string variable. I then shared using split() and grabbed the number.

  Once this has been done well all worked.

  This is the final code.

  ...

  for (x = 0; x< somenum;="" x++)="">

  name and create the button...
  btnName = "adButton_" + x;
  this.attachMovie ("btn", btnName, this.getNextHighestDepth ());

  get the button...
  adButton = eval (btnName);

  button position...
  this.adButton._x = somePosX;
  this.adButton._y = somePosY;
  this.adButton._width = someWidth;

  define and Add button actions...
  this.adButton.onRelease = function() {}
  imThis = what + "";
  I have = imThis.split ("_level0.adButton_");
  showAdImage (i [1]);
  }
  }

  ...

• tab in firefox, open now

  I get 'Tab in Firefox, open now,' when a link is clicked. It's something new after an update. I hate adding an extra step to open a link. It is very annoying. How to stop? I am under Android 5.0 on Samsung S5.

  Hi, in order to activate or disable the queuing tab refer to Open links in the background for later with Firefox for Android viewing.

• How to tie the two serial numbers using test including the tie in the database.

  I have two separate committees, I need to link the serial number too.  One is being tested as a separate unit, then the two are tested together, I need to make sure that I connect them in the database.  Don't know how to do it, looking for any input I can get.  Using a labVIEW vi to request the entry of a Board, and then use information interface to USE testbed for UUT of the hand.

  I have juries, one of the boards, A onboard, was tested by a different sequence file, then A is connected to Board B, and then they are tested as a complete set.  Received a few suggestions on how to save the two serial numbers, but went with a popup message added types of step (modified record results), and then just have the user scann the second number in and it stands as one of the results of the step in the database.

• How to transfer data from a MainSequence to a reminder

  I'm just trying to learn TestStand so patient with me.

  I use the sequential model by default. I added a few steps and local variables to my MainSequence. I copied the reminder of the sequential model test report by default and which added to my list of sequences as a reminder. I have since added a few steps to customize the reminder of sequence of test report.

  My problem is to find how to move a my MainSequence LocalVariable to my reminder of test report. What is the best method? How can I use an Expression statement in my test report reminder to recover data from the local MainSequence? What is the best method?

  I spent 8 years to do with threads of data flow programming. This passage disconnected data is very frustrating.

  Not sure know how you are with the RunState variable?  RunState essentially information describing the State of enforcement.  At this point in your reminder in MainSequence executing State is not known (even if you have a pretty good idea).  In your case, you are probably safe, but there are cases where it could cause problems.  It is simply not sure make a habit to access data via RunState.  And it complicates maintenance because now you have stronger coupling (not in your case).

  In my opinion, FileGlobals seems to be more stable.

  There are moments where the RunState access is needed but I would like to use it with moderation.

• Stabilized measure continues

  Hello world

  I'm looking for something that I have not found here as a matter already welcomed (perhaps because I did not use proper keywords).

  I'm doing a program of measurement of blood pressure. The tension is caused by a change in the concentration of gas in a liquid, I use probes for it. A part of a program is to measure the voltage and expected a steady state in order to have good results.

  Say, I'm measuring 540 points (3 minutes, 3 Hz). The State, which must occur, is the sequel:A1, A3 or A1 > A2A4 or A2 > A3

  I'm looking for a function called 'Add another framework, if the incident' or something like that. Could someone please help me or give some advice?
  Concerning

  Jan

  Looks like you need to the current value (X), the previous value (X-1) and the one that precedes this (X-2).  You can do it with a registry to offset by adding a new step on the left edge, as in the example.  Notice that it contains X, X-1, and available inside X - 2 While loop, so just add the logic of 'stop' (which I left out) for the wire to the Terminal stop.

  

  Bob Schor

• TestStand 2012, BatchModel treatment of intermittent problems result.

  During execution of the BatchModel results are supposed to be going to separate directories for each Socket.  What we see is that intermittently, the path is not correct for a few shots, that is to say the results for a socket will be written to the badly taken directory.

  What could be cause the shells to the incorrect path generator?

  To obtain the path and the following file names has been added to USE Start, in NI_ReportGenerator.seq:

  Parameters.ModelPlugin.PluginSpecific.Options.ReportFileBatchModelExpression = ""-"-... \\\Data\\\"+ Parameters.UUT.ModuleType + "-" + StationGlobals.JSFPNR.TestType + (Parameters.UUT.ModuleType == ""?) "" " (Reports\\\":"\\\Reports\\\") + Parameters.UUT.SerialNumber +" \ "+ Parameters.UUT.ModuleType +"[] - TR2_ _MSN"+ StationGlobals.JSFPNR.TestType +" _PN ["+ Locals.UUT.PartNumber +"] [] []. " \"",

  Parameters.ModelPlugin.PluginSpecific.Options.BatchFileBatchModelExpression = ""-"-... \\\Data\\\"+ Parameters.UUT.ModuleType + (Parameters.UUT.ModuleType == ""?) " (Reports\\\":"\\\Reports\\\") +" BatchReport [] []. " \""

  You can insert steps Lock acquire and release the lock "TestStand - determine report File Path Mutex" around the stage that you added AND current steps of determination of file report so that the report expression file values are not changed by a power outlet while being still used by another taken?

  Lock: Acquire 'TestStand - determine the report queue Path Mutex'

  Lock: Open early 'TestStand - determine the report queue Path Mutex'

• Loop with Timeout

  Hello!

  is - that someone tried to set up a custom test step that performs a loop failure, until a timeout occurs? Unfortunately, this is not one of the default option in TestStand loop.

  I try to test an asynchronous system with signal delays and want to retry a teststep during a certain period of time before declaring it "failed".

  Is it possible to do this? I tried a few that, including a stage performance in the message custom action condition that changes the SeqeunceContext.NextStepIndex property as shown in the example OR a button to retry in an operator interface custom. The code is executed, the property is changed, but step is not repeated. Can anyone help?

  Hello!

  My question is obsolete now that I managed to get it working now.

  I use four called Timeout, StartTicks, StartTicksValid and ExecutionTime variables of step. I then added two sub-steps, a prestep defining the StartTicks if not valid, and a poststep to calculate the time elapsed since the StartTicks. Then I use a custom loop expression by comparing the execution time for the timeout and stop if there was a success or if the time limit is exceeded. Success of the whole loop is then determined by the number of loop past, steps which must be watching! = 0.

  Now, I have to take a look again how to change the report to contain the data I want. I don't want to get the intermediate outcome and the counties of loop, but rather the execution time. This should be a working RTFM.

  Thank you for your willingness to help.

  hit74

• Clear and original graphics

  I can't completely erase and reset a chart... I do not know if this is possible.

  I generate a chart on a separate Panel. Now if I close the Panel, I want to be able to generate a new graph with new parameters.

  I call DeleteGraphPlot (int panelHandle, int controlID, int plotHandle, int refresh); with the option-1 for plotHandle, which deletes all of the plots on my chart.

  The first problem is now-> the legend is not allowed

  I could call ClearLegend, but I read that it actually hides that items... which is not the behavior I want.

  Also the plotHandles do not seem to reset. This causes a few problems while generating a new graph and adding the correct to the legend label since all the old handles always seem to be there (but my routine starts from 1 again).

  Am I missing something? Or is it just not possible?

  I'm using LabWindows/CVI 8.5.

  Hi, while I can't say anything about the legend, I can assure you this parcel handles are not reused when a field is deleted. There is an interesting discussion about it here.

  A good solution for your problem is to create an array of plot handles were stored them for tracing and re-read the handles when you need to customize a conspiracy.

  You can also try to remove all locations and legends, the control of duplication and deletion of that which exists just to see if a new can still trace IDs of the old chart: I've never tried because I prefer the first solution, I mentioned.

• The function of the vs Office Update laptop?

  I have a desktop Dell running Vista Home Edition & a laptop Dell with Vista Home Edition. Both are set for automatic updating.
  When automatic updates of Office I then finish and turn around my chair to update the Ladtop, but he said, it is up-to-date.
  It's already happened, but why the laptop wouldn't need to be updated as well since both have Vista?

  Thank you
  Arthur H

  Hi Arthur,.

  Thank you for writing to Microsoft answers Community Forums.

  Make sure print spooler service and the service of dependency for the print spooler service is set to automatic and started.

  To start the print spooler service and set it to automatic, follow these steps.

  1. right click on my computer (computer in Vista), and then select Manage

  2. in the console that opens, scroll down the menu Services and applications

  3. click on Services

  4. double-click on the key of spooling print

  5. in the 'Général' tab, go to Startup Type

  6. set the value to automatic, manual or disabled

  7. to activate or deactivate the service immediately print spooler, click on stop or start

  8. click on apply, and then restart the computer.

  Check if you can add the printer and try to print after restarting the computer.

  Also, you try access the link below and run the patch program.

  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  If the problem persists, reply with the following details:

  1. you receive an error while adding the printer step?

  2. don't you make changes on your computer, before that this problem occurred?

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think