Can't do recovery disk "cannot set the power.

Similar Questions

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. Error - ' Manager of power strategy cannot set the regime... two revision levels are incompatible "when trying to save the scheme in power options.

     Original title: cannot set a power scheme in Power Options

     Cannot set a power scheme. When I try to save the scheme, "Manager power strategy impossible to define the... two revision levels are incompatible."

     How can I fix it?

     Hi BernieHopkins,

     1 have you properly previously defined the power scheme?

     2 have you made any hardware changes or software on the computer before this problem?

     3. What is the full error message that you receive?

     If you receive the same error as mentioned in this link, you can follow this link & check if the problem persists.

     Error message: Power Manager political unable to define a strategy. Indicates two revision levels are incompatible

     Hope the helps of information.
     Please post back and we do know.

  8. Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

     Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

     Hi rebick,.

     Try the troubleshooting steps presented by spirit X in this thread.

     Dena
     Microsoft Answers Support Engineer
     Visit our Microsoft answers feedback Forum and let us know what you think.

  9. I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of

     I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?

     Hi Pcaubi,

     There is no such updates for the same from now.

     I suggest you to please put in a feature request to: Photoshop community customer family

     Kind regards

     Tanuj

  10. ORA-12054: cannot set the ON COMMIT...

      Hello
      can someone please tell me what am I missing here?
      I can't create a materialized view, but I can't understand why is this?
      

      SQL> select * from v$version;
      
      BANNER
      ----------------------------------------------------------------
      Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
      PL/SQL Release 9.2.0.7.0 - Production
      CORE    9.2.0.7.0       Production
      TNS for HPUX: Version 9.2.0.7.0 - Production
      NLSRTL Version 9.2.0.7.0 - Production
      
      
      SQL> r
        1* select master,primary_key from user_mview_logs where MASTER='CIS_CASE' or master='CCR_ACTION_DEF'
      
      MASTER                         PRI
      ------------------------------ ---
      CCR_ACTION_DEF                 NO
      CIS_CASE                       NO
      
      
      
      SQL> r
        1  SELECT a.table_name, a.constraint_name, a.constraint_type, b.column_name
        2    FROM user_constraints a, user_cons_columns b
        3   WHERE a.constraint_name = b.constraint_name
        4*    AND a.table_name IN ('CIS_CASE', 'CCR_ACTION_CASES')
      
      TABLE_NAME                     CONSTRAINT_NAME                C COLUMN_NAME
      ------------------------------ ------------------------------ - ----------------
      CCR_ACTION_CASES               ID_PK                          P ID
      CIS_CASE                       PK_CIS_CASE                    P ID
      CIS_CASE                       SYS_C008496                    C ID
      
      
      
      SQL> CREATE MATERIALIZED VIEW mv
        2    REFRESH FAST ON COMMIT
        3  AS
        4  SELECT c.ID,
        5         CASE
        6            WHEN (c.script_id IS NULL OR c.queue_id IS NULL)
        7               THEN 1
        8            WHEN c.script_id IS NOT NULL AND c.queue_id IS NOT NULL
        9               THEN 2
       10         END TYPE,
       11         c.datum + a.due_time / 24 - a.alarm_due_time_1 / 24 alarm1,
       12         c.datum + a.due_time / 24 - a.alarm_due_time_2 / 24 alarm2,
       13         c.datum + a.due_time / 24 due_date
       14    FROM ccr_action_def a, cis_case c                                  --users u
       15   WHERE NVL (a.queue_id, NVL (c.queue_id, 0)) = NVL (c.queue_id, 0)
       16     AND NVL (a.type_id, NVL (c.case_code_type_id, 0)) =
       17                                                    NVL (c.case_code_type_id, 0)
       18     AND NVL (a.code_id,
       19              NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
       20             ) = NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
       21     AND (c.datum + a.due_time / 24 < SYSDATE)
       22     AND state IN (1, 2)
       23  UNION
       24  SELECT c.ID, 3 TYPE, a.due_date - a.alarm_due_time_1 / 24 alarm1,
       25         a.due_date - a.alarm_due_time_2 / 24 alarm2, a.due_date
       26    FROM ccr_action_cases a, cis_case c
       27   WHERE c.ID = a.cis_case_id
       28     AND (a.due_date < SYSDATE)
       29     AND state IN (1, 2);
        FROM ccr_action_cases a, cis_case c
             *
      ERROR at line 26:
      ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view

      Vili Dialis wrote:
      Rob, if you have any comments on my last query operation, I would be greatfull.

      Vili,

      You must start with a join view which does not contain any aggregate. Just a join of the ccr_action_def and cis_case. And don't forget to include the two table rowid to make quickly updatable. Then create a full blown newspaper on top of the join mv materialized view and create mv aggregation, selecting in the mv to join.

      Kind regards
      Rob.

      Published by: Rob van Wijk on 14-dec-2009 12:09

      And two boards that are not linked mv:

      (1) as has said, use a.id and c.id in a group by clause for the query itself work
      (2) do not use the string ' 14.12.09", use a date but you compare it with a date. So use: date "2009-12-14'

  11. Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

      Satellite M100-179
      Graphics - ATI x 1400 card.
      Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
      There is no resolution 1368 x 768 in the available resolution list.

      The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
      I think so you re not able to choose this special resolution on the external display.

      In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

  12. Satellite A300 - is the recovery disk contains all the drivers?

      I bought a new Satellite A300 and now I have to reinstall Windows Vista. My question is:

      Through the recovery disk I already have all the necessary drivers for my computer?
      What I have to download them one by one in line?

      Thank you for your help

      Ciao

      Michele

      Hello

      Yes, the Toshiba Recovery disk contains all the drivers and tools for your laptop. After using the Toshiba Recovery disk, you have the same settings that you have started the laptop the first (out of the box). This means that the disc contains a picture of the factory settings.

      The disc is very easy to use: you only have to boot from it and follow the instructions on the screen. Windows, and all drivers will be reinstalled in a few minutes.

  13. Cannot set the time zone of Moscow winter + 3 hours.

      Cannot set the time zone of Moscow winter + 3 hours.
      Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
      It is an error of your software when you are ready to address this issue.

      Automatic deactivation date & time(Settings>Date&Time...)

  14. BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

      BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

      found in the security system] [, thanks]

  15. ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

      Hi all

      I tried provide access to filter the group in both SSP and thru Maxl command but still get the error below. Any experience of this problem? If Yes, please let me know how you solved this problem.

      
      

      ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

      
      

      Thanks in advance!

      Krishna

      Read the support document that I posted the link, prior to changes for openldap ensure you that it is saved.

  16. Cannot set the configured property "/ Initial.initialServices".

      Hi all

      I'm getting following error.

      05:21:52, 006 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet

      05:21:52, 013 INFO [STDOUT] * error

      05:21:52, 064 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet

      I checked the path of configuration of two components and the structure of the servlet is as below.

      src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java

      For properties files I created them under the path - config/atg/dynamo/servlet/dafpipeline / config/atg/dynamo/servlet/pipeline

      Inside of these I keep the files FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties
      

      The Initial.properties is as below - config/atg/dynamo/servlet/Initial.properties

      The content of Initial.properties is-

      & initialServices =.

      / ATG/Dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,.

      / ATG/Dynamo/servlet/dafpipeline/FacebookProfileRequestServlet

      
      

      Should I have to keep the two pipelines-dafpipeline and pipeline or one of them?

      And my pipeline structure is correct or not?

      How to solve the error above?

      Please help on this!

      Kind regards

      Prateek

      You seem to be confusing core components and classes Java.  They are completely different.  The error message that you get "Unable to resolve component", says that the kernel is unable to find a file of specific properties anywhere in the directories named in your configpath trees.  To be precise, there is no file named /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties in your config directory.  If I read correctly this conversation, it is because the file with this name is a .java file, not a .properties file.  The two most likely causes of your problem are:

      1. you have a file of properties somewhere that mentions/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet as the value of something else than $class.  $class is a special case whose value is sought by a Java ClassLoader in the classpath.  Values of the other properties are interpreted as references to the component, and looked up from core in the configpath.

      2. in the directory tree that contains the /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties isn't in the configpath.  ATG displays the complete configpath during startup.  If your directory is missing, you have may have specified correct information in the entrance of the ATG-Config-path in your module MANIFEST. MF file.

  17. Can I buy 5 LightRoom and set the language for the Portuguese (Brazilian)?

      Can I buy 5 LightRoom and set the language for the Portuguese (Brazilian)?

      Yes, https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom

  18. Can I create a cursor and set the values by myself

      Can I create a cursor and set the values by myself, and it has not been filled by an SQL?
      
      Thanks in advance

      Yes, you can.
      Use variables with a default value or nvl (some_parameter, some_variable) in your cursor WHERE predicate.
      They provide an example if it isn't clear, since that's all I can think about reading your post...

  19. Cannot change the power state of VM: internal error

      Hello

      I freshly installed OS elementary which is based on Ubuntu.

      VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:

      Cannot change the power state of VM: internal error

      I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.

      Here is my log file

      Thanks a lot for your help

      PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

      Hello

      Welcome to the VMware community forums.

      I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

      If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.

      vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
      

      If you then put the bug number into google, you get:

      http://KB.VMware.com/kb/1227

      Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

      Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

      The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

      --

      Wil