Can't get into recovery

Similar Questions

• can't get into recovery mode

  My ipad2 nonstop, first. When I press on and press and hold the power button on the top, slide stops seeing never does. Finally I connect to computer via USB and itunes. When I try to turn off hard, it just won't work. I try to get back in now theHOME and button / stop, but I never get further than the white Apple Logo.

  Just to be sure:

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  You may need to do the above, more than once as recovery mode is difficult to enter.

  Restore first as New and test. Then restore backup if you wish. If the backup is corrupt it will probably bring back the question.

  https://support.Apple.com/en-us/HT201263

  If the steps above do not help, you may need to consider at an Apple store for testing.

• Flow 10 7 HP - Windows does not start, I can't get into recovery 8.1 because cannot boot from USB-HELP Please!

  Hi all, I'm new here!

  I am (excuse me: has) with a stream 7

  A few days ago, I tried to install Windows 10 TP renovation 8.1 with Bing. After a while of waiting, he managed, but unfortunately I have forgiven to in SSD Tablet hp drivers, thinking that they were not necessary. If the touchscreen, WiFi and all the other stuff has failed. After I've got collegated by OTG, a keyboard and a mouse, that I managed to use Windows 10.

  Try to install the drivers, my fault, I opened a .exe from Realtek (perhaps for audio), Tablet asked to reboot and after that I can't access Windows anymore.

  I tried to start Windows 8.1 from a USB key, but it does not start, the same even if I disable secure boot.

  With disabled bitlocker Windows gives this error

  

  In the start option, I set these settings

  

  I put the USB in this way:

  

  The stream does not consider the USB absolutely XD

  If I turn on again the secure boot Windows gives this error (which 99% is caused by the .exe I installed):

  

  Restart the flow some time with secure boot it goes in a menu (where touch screen works) where there are a lot of options to reset Windows, but none of them doesn't work. If I try to format in this menu it asks password for my account, but it does not accept the mine :/

  If I try to open the collection (from volume button when it starts less) it gives this message:

  

  Waiting for relief,

  Thank you for your patience!

  @fotogruia in my case, the indicated operating system was windows 10 and as I wrote it has worked well. Good luck!

• How to remove the Windows 7 Administrator user when I can't get into Windows

  My laptop was stolen, and all the disks.  When it was recovered by the police, it was returned to me with a password protected user account.  I tried the steps to connect safe mode, but that the same user account is presented as the administrator account.  I can't recover the system, given that the recovery disks were never me returned (very probably not recovered by the police) - even with the OS install disk, flew with the computer.

  How can I get into my computer and get back to work again?

  My laptop was stolen, and all the disks.  When it was recovered by the police, it was returned to me with a password protected user account.  I tried the steps to connect safe mode, but that the same user account is presented as the administrator account.  I can't recover the system, given that the recovery disks were never me returned (very probably not recovered by the police) - even with the OS install disk, flew with the computer.

  How can I get into my computer and get back to work again?

  Use your Windows repair CD to start the computer in Repair Mode, and then use the system restore to set Windows to the Restore Point as soon as you can find. The chances are that this will be a point before they changed the password.

• Where can I get a recovery for Equium A100-549 media

  I need help please, I bought an A100-549 on internet, it did not come with any recovery media.
  He has now a virus is serious and I need to restore it. Where can I get a recovery media for my laptop?

  See you soon

  Perfecto

  Hello

  where did you bought it? On Ebay? If Yes, then you must contact the person who sold you the unit. If you don't have any chance to get this collection, you should communicate with a
  ASP local in order to get a recovery.
  If Don t you want to get a recovery, and you have a genuine copy of Windows that hang out, then install, download the appropriate drivers for that machine on toshiba website and install
  them afterwards that you have windows installed.

  Welcome them

• I can't get into a new contact to my contact list

  I can't get into a new contact to my contact list

  And what happens when you try to do?

• Satellite L840/020 - can't get into BIOS after enabling the quick start option

  I have a laptop Toshiba L840/020 (PSK8LA-020007). I recently installed a 330 Series SSD and Windows 8 Pro RTM 6.2.9200 MSDNAA on this Intel and enabled the fast boot option in the BIOS (boot speed > fast).

  Now I can't get into the BIOS, no matter what I do. I tried pressing the power button / stop while pressing F2 (as suggested by a few other forums), upward on default that I tried all F and Esc keys, but nothing does. I also tried repeatedly pressing F2 during startup, plugged a USB external and supported on F2 keyboard on it, but no matter what I can't get into the BIOS.

  When I go to the Toshiba support download section > 8 64 bit Windows, I see also a BIOS update for my laptop, but when I try to install I get the following error:

  ---------------------------
  Error
  ---------------------------
  Flash process will end!
  Current platform have secure start capability, it must provide the location of storage NV by interface IHISI.
  Please contact BIOS OEM Engineer to add the feature.
  Without this IHISI interface, variables to authenticate will be modified or erased by flash process.
  If you understand the risk and want to keep flashing.
  You can add the following parameter in platform.ini to ignore the error.
  [EngineeringErrorDisable]
  SkipSecureBootProtectionCheck = 1
  ---------------------------
  Ok
  ---------------------------

  I'm not changing platform.ini and flash, without first asking the help of the community.

  Please let me know how to enter the BIOS. Thank you.

  null

  Hello

  First try INS then F2 key.

  Then you should be able to access the BIOS, I recommend disabling the QuickStart in the BIOS if you can successfully enter the BIOS.

  With regard to the update of the BIOS.
  I checked the page of the Toshiba driver to THE and it seems that the BIOS v6.20 is even similar to Win 7.
  I think that the BIOS update must be done running the system pre-installed Toshiba since Win 8 is not officially on the market, and to my knowledge, there are some big restrictions updated BIOS running Win 8

• Pavilion g series 1016-tx: with a burned (more likely) display card, I can't get done recovery without getting a blue screen

  Hello all, I have this old laptop that has one of these double called graphics cards. Unfortunately the ATI you won't work after a few years, I get blue screen when you try to start. I disabled the ATI display driver, and he worked well with the integrated INTEL card.

  And then I tried to restore the thing to factory default settings by using the Recovery Manager. Once more I am getting blue screen when you try to start, which means I can't get the recovery made. And this time I won't be able to boot in safe mode to disable the display driver.

  Any help?

  Hi @JonJon ,

  Welcome to the HP Forum! Is a great place to find answers and advice! You have the best experience on the HP forum, I would like to draw your attention to the Guide of the HP Forums. First time here? Learn how to publish and more.

  I understand that you have a failed graphics card that overcame you by turning off that one and using the integrated card, when you tried to perform a recovery, that he had failed as a result of the card, recovery won't work due to the fact that it tests the equipment prior to installation and of course it will detect the problem.  I don't know, but after talking with a colleague, you should be able to install from a disk of Windows, but I am not sure. You may be able to download Windows from the web, if this is not possible, it would be probably more cost-effective to replace Notepad.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. "In addition, by clicking on the" ""Twww.Mountainview.rsb.qc.ca Up ' below is a great way to say thank you!

• Can't get into BIOS

  I just bought a side 130 for my girlfriend for Christmas and wanted to set up today.

  But I just can't get into the BIOS! I keep on pressing F1 during the startup Lenovo screen.

  I have pressed it several times, he broke down, I even tried with the Fn key. Nothing has worked.

  I have been working with and professional support Lenovo (and IBM) laptops for more than 10 years and not once I had such a problem. It is only the second E-series phone I've ever had. I bought myself an E525 last summer and had no such problems and to work, we have T, X and W-series.

  Am I missing something? Am I too old? :-D

  Any help would be appreciated.

  Thanx

  The twist, I completely power down the laptop - meaning, hold the button for 5 seconds (the closure of normal windows will not suffice).

  Then, when you turn it back on and see the Lenovo logo for the first time, you should see the message "press on enter to interrupt Boot", press ENTER, and then you will get a menu of options, one being to enter the bios.

• I can't get into my hotmail I think has been hacked and blocked, how can I use it to connect to Facebook.

  My old hotmail email has been hacked and blocked by Windows Live, which means, I can not all emails from this account, then how to I can use it to get into Facebook again but can not get into windows Live Hotmail, I have created a new e-mail address, but have lost all my contacts on my old Hotmail account you think someone is using my old Hotmail e-mail address. I don't understand how I can use the old e-mail address to log into Facebook but can't get the emails at all.

  HNS my old hotmail email has been hacked and blocked by Windows Live, which means I can not all emails from this account, then how to I can use it to get into Facebook always but can not get into windows Live Hotmail,.
  . I don't understand how I can use the old e-mail address to log into Facebook but can't get the emails at all.

  Ann, recorded with Fb uses this old account, your user ID, so Fb he still uses until you delete or change on Fb. Fb doesn't know anything about your account other than hotmail, but it is possible that some Fb users hacked you.
  Replace your new email for notifications in Fb.

• I can't get into my e-mail address. Account is no longer supported. Error message 35

  I can't get into my e-mail address.  Account is no longer supported.  Error message 35

  Hello

  You don't tell us the account provider. Hotmail, Windows Live Mail, Yahoo or so on--just the provider
  After the @ sign and no e-mail address full which responds automatically to blocks.

  You must contact the mail provider, because we cannot help regardless of the provider.

  Here is some info that might help:

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/
  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  --------------------------------------------

  Answers is a peer support group and unfortunately has no real influence on Windows Live.

  Windows LiveMail has its own Forums, so you can ask your questions there.

  Windows Live Mail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solution Center - Solutions mail - Mail Forums
  http://windowslivehelp.com/

  Windows Live Mail - mail Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  Compromised account - unauthorized account access
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Can't get into any of my mail such as facebook, etc.

  * - Original title - * address email is removed from the privacy *.

  Can't get into any of my mail such as facebook, etc.! I need a new password, because I forgot mine and he wants to know my address? When I put my email address he said that someone already has this address! YES, I KNOW THAT BECAUSE IT OF ME! Don't know what else to do?

  Hi Robert,.

  If the question is limited to Facebook, you can connect with Facebook and post this question in the forum of the Facebook community: http://www.facebook.com/help/439078162792430/#! / help/community

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• iertutil.dll was not found after trying to download internet explorer 8. I can't get into my computer. Not even the start screen.

  I can't get into my computer.  All I can get is the Task Manager.  It shows all my still intact material, I'm not him.  Not even to my home screen.  All that appears is my screensaver and a message saying to re - install iertutil. DLL... but how to do when I can't.

  Maybe someday, we will see again the proposal to:

  Once you open the Task Manager try the commands below.

  1. in the Task Manager, click file, and then click new task

  2. now type rstrui.exe and click OK

  This would launch the system restore on the computer refer the below Microsoft article more about the restoration of the system.

  If you really try , you would find that it does not work because rstrui.exe is unlikely that never will be in the PATH statement.

  If you want to launch the restoration of the system from the Task Manager, you will need to perform a new task like this:

  %SystemRoot%\System32\restore\rstrui.exe

  If c:\windows\system32\iertutil.dll is missing, you will see a message like this:

  Explorer.EXE - unable to locate component

  The application has failed to start because iertutil.dll was not found.  Re-installing the application may fix the problem.

  Because explorer.exe is not running, you will see only your background image /, but Ctrl-Alt-Delete will always bring up the Task Manager where you can maneuver around and replace the file.

  If the only problem with your system, it's that iertutil.dll is missing, you can replace the backup copy in the dllcache folder.  You can continue to obtain reviews iertutil.dll is absent, but just click OK for messages of recall as they pop up so you can continue working.

  One might think that you use the Task Manager, you can browse c:\windows\system32\dllcache and (after choosing to view all files) copy the iertutil.dll from there and then paste the iertutil.dll file in c:\windows\system32 where it belongs.  That actually works, but it seems that it does not work as you will get an hour glass stuck on the paste operation and perhaps wonder whether or not it has actually worked.

  To feel better replace the missing file, so you can actually see the file being copied and replaced... Task Manager, click file, new task and enter in the box (assuming that Windows is installed on your C drive):

  cmd

  Click OK to open a command prompt window and first make a copy of the original file (if it exists) by entering the following command:

  copy c:\windows\system32\iertutil.old c:\windows\system32\iertutil.dll

  That copies the file in progress if there is an and it will just complain if it is not a copy.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, copy the backup copy of the missing file and replace the missing or suspicious file by using this command:

  Copy c:\windows\system32\dllcache\iertutil.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Type "exit" to close the command prompt window.

  Who will replace the missing or suspicious file and if that's all that's wrong with the system, Shut Down box Task Manager, you can choose to reboot your system and see how things are going.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• I can't get into my email, but sometimes I can't open messages, why?

  I can't get into my email, but sometimes I can't open messages, why?

  I wouldn't have the slightest idea of Hotmail. Ask those who know in the Hotmail forum.
   
  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• I can't get into my control panel to change the security settings or anything like that. It says \windows\systems32\rundll32.exe not found. What should I do?

  I can't get into my control panel to change the security settings or anything like that. It says Windows\systems32\rundll32.exe not found.  What should I do?

  Hello

  1. don't you make changes on the computer before this problem?

  Check if the steps of troubleshooting the following article shows you help.
  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340