Can't log in as administrator! Impossible to change anything!

Similar Questions

• Impossible to change anything in the "window color and appearance".

  Hello.

  Something happened to my computer a while ago, that made me unable to see or edit certain elements in windows.
  Please see image attached:
  
  It seems that my DPI setting is too high so that the text and the content of a window does not.

  These windows cannot be resized or scrolled so I'm in a dead end.

  I tried to change the DPI setting of 100-150%. Does nothing for me.
  Does anyone have a solution that does not involve a complete reinstall? What can I do with the registry to bring any default return?
  Thanks in advance! :)
  Thanks for your reply BearPup.
  Graphic design, I use Adobe Illustrator, Photoshop and Indesign products.
  In color management, I have no assigned profile. If this is the one, you hear:
  You can clearly see my problem with dialog boxes in this screenshot.
  The contect doesn't fit the box.
  I tried changing the settings of compatibility for all of my Adobe products, unfortunately there is nothing.
  going to try a repair of Windows Installer now.
  Edit:
  Impossible to find anything else related to my problem, but a repair installation has worked for me.

• I just asked a question about Java. I received a response. I can't answer, so it's impossible to add anything to this area. How to add to the box?

  I can't add all the sites, either by cut-and - paste or type the thing everywhere. Nothing allows me to add!

  So, what to do on add?

  Thank you.

  It would be useful if this support forum my license to integrate a picture, but I can't even connect to my new account, as it says my password is wrong, which is not very frustrating on all accounts!

  FWIW, the original question is https://support.mozilla.org/en-US/questions/1036576 and I had step by step response in there.

• locked on administrator, impossible to download anything, everything is password protected

  Hello I have a hp laptop 2000 I brought in a store of the computer used, it works fine but I'm locked out of he administratotr, I tried several methods to get with no luck I even brought a password recovery disk and it does not work either, I can't download anything either.

  Hello

  You will have to reinstall Windows:

  You may be able to use the recovery hard disk partition. Follow the instructions in this document:

  If it does not, you can purchase recovery media. Go to the page of the driversfor your specific model. Looking for an article called 'order recovery media '.

  If none of the above options work for you, you may need to purchase a retail version of Windows. You can check this page to see if your system will work with Windows 8.

• Still can not log in to windows XP, cannot change the user name, or start in what either.

  locked out of windows xp.  happens only with the window prompted for a user name and password.  the user name is the name of the previous owner and does not know the password.  It is as far as the computer goes.  It's not my computer (thank God), but I need to know what to do to help the girl he has.  The computer was rebuilt and bought by it.  It's a computer dell laptop.

  What I can do.  I can't connect what either.  I can't edit or create a new user name and password for it either.  I can't get in any other mode.  You have any suggestions?

  Hello

  Microsoft cannot help you to reset, change or delete passwords. For more information, see the article mentioned below.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/default.aspx/KB/189126

• MSCONFIG - access denied, must be logged on as administrator

  When I run MSCONFIG, I get a message "Access denied, must be logged on as administrator to make changes" when I get out of it.  If I make a change, the change takes effect, so this isn't really "deny" me anything.  However, I get the message if I make a change or not.  By doing a few google' ing/forum tedious reading, it seems that there is a cut with Windows XP and Norton Internet Security 2010/2011.  It apparently does not on Windows 7 or Vista, or with NIS 2009.  It prevents me from doing anything, it's just a major nuisance.  I would like to check if this is the issue I'm having.  Any help would be greatly appreciated.  Thank you.

  Hello

  Step 1:

  You can if the problem continues in a new user account. To create a new user account, follow the link below.

  http://support.Microsoft.com/kb/279783

  Step 2:

  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  http://support.Microsoft.com/kb/811151

  Also check if there are infections of viruses on your computer. Follow the link below.

  http://OneCare.live.com/site/en-us/default.htm

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install fonts even if I am logged on as administrator

  I tried to install a new font, but I can't do it through a program of the Organization of the fonts.  I tried to go through the Control Panel, but when I opened the folder of fonts, it does give me the option under 'File' to install fonts.

  I went to:
  http://support.Microsoft.com/GP/Admin who checked my environment and told me to go to step 2 to verify that I am logged on as administrator.  I was able to open and change the time, which, according to this page, check that I am logged on as administrator.

  Then he said: 'Click here to continue' - but the link javascript:pc_NavBack (1) is idle

  If I am logged in as an administrator, I should be able to install fonts - but I can't.

  What should I do now?

  Thank you.

  Create a new administrator user account and then try to install the fonts.

  See:

  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

• I can't log in as an administrator in my windows 7 PC with 32-bit operating system. What can I do?

  I put my password to log on as an administrator.  When I restrart the computer and try to log in it asked me to change the password to connect. I did it. When I try to getback to my computer with the new password, it says it's a mistake. Now, I can not connect as an administrator. What can I do? And who is the administrator of a computer that I own. I'm puzzled. Your help please

  I put my password to log on as an administrator.

  I don't understand what you mean with this statement - please explain.

  To recover from all that you have done, you can follow these steps:
  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you did what you did.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Is it possible to add the Win7 Home Premium 'Administrator' user account so that it can be selected during normal connection? I want to be able to log-in as Administrator without going the route of the F8, as in XP.

  I need to be able to log in as 'Administrator' to the normal screen log-in, ranging from the road to F8 vice. I can find no option for this, not even NET USER to the CMD window. If it is possible, perhaps via a registry change, I sure would appreciate the info. Thank you

  OK, I will be more detailed:
  1. create an administrator account.
  2 log in under this account.
  3. click on start.
  4. type the three letters cmd in the search box.
  5. press on Ctrl + Shift + Enter
  6. click on "run as Administrator".
  7. type the following command:
  NET user administrator /active: ye

• I accidentally deleted my administrative account that had a password to attach to it and now I can't log on to my laptop.

  I accidentally deleted my administrative account that had a password to attach to it and now I can't log on to my laptop. He said that my laptop needs a password and the old password does not work. And there is not any other profile that I could use. Can anyone help me please with this problem?

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you deleted the admin account.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

• Impossible to change the administrator password or log in to the administrator! (CF10)

  So as the title says, I can't connect to the administrator and change the password through Coldfusion10\cfusion\bin\passwordreset.bat doesn't seem to be actually change the password because I always get the "invalid username/password" when I try to log in after resetting the password.

  Further, I used the old method of changing neo - security.xml and changed 'admin.security.enabled' to false. This allowed me access to the administrator, but even in this case, when I activate the password protection and reset the password of the administrator, I am still unable to connect!

  A detail that may be a clue to solve this problem: when installing CF, it has been fixed to not use the default username "admin". When I try to open a session if I try with "admin" and the username is personalized with no luck.

  Any ideas on how to solve this problem? It seems that the password encryption system is broken and store the hash of password reset evil or something...

  EDIT: I forgot to mention that I have to restart the service after the reset of the password.

  Here are possible solutions, you can try: -.

  • Try another browser (problem occurs mainly with IE).
  • Try another address http://127.0.0.1:port_no/CFIDE/administrator/index.cfm or http://localhost:port_no/CFIDE/administrator/index.cfm or http://ip:port_no/CFIDE/administrator/index.cfm.
  • Try the passwordreset.bat, then try again with the same ip address or the IP loopbak.
  • Try a different server and remote access to the server http://ip:port No.
  • Select the port internal/built for ColdFusion and then try to http://localhost:8500/CFIDE/administrator/index.cfm, where the 8500 is the internal port to ColdFusion.

  Note:-a restart of the application server ColdFusion to allow port internal/built would be necessary.

  Here's a similar thread ColdFusion 11 fresh install Administrator Login does not there is place for ColdFusion 10 as well.

  Kind regards

  Anit Kumar

• Since the last update to FF, I can't log out of Yahoo and when I close FF it tells me it crashed.

  Since the last update to FF, I can't log out of Yahoo and when I close FF it tells me it crashed.
  When I try logging out of Yahoo, it comes up with:
  The secure connection failed

  An error occurred during a connection to login.yahoo.com. You have received an invalid certificate. Please contact the server administrator or email correspondent and give them the following information: your certificate contains the same serial number for another certificate issued by the certification authority. Please get a new certificate containing a unique serial number. (Error code: sec_error_reused_issuer_and_serial)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the web site owners to inform them of this problem.
  

  I have run CCleaner and erased cookies. Uninstalled and reinstalled FF to no availe.

  When I close FF one box comes telling me it crashed.

  I can log out of Yahoo in Internet Explorer.

  the advantage of this feature to scan https is at least questionable. in order to make it work, avast has sort of a man-in-the-middle 'attack' in order to access the contents of the encrypted connection (firefox supports a feature called pinning of key which can be used by Web sites to address these MITM attacks and who also seems to pick up interference from AVAST).
  When you download files via a https connection, they will be analysed by the AV software once they land on your hard drive in any case. However, it should be the job of the Navigator to make it impossible to get infected by malicious software trying to surf around...

  Edit: Please try to restart the browser once again, it may take a new session for the change to take effect.

• you are not logged as an administrator...

  When I go to MSCONFIG to change which starts, I keep says I'm not logged as an administrator and I need to sign out and then sign back in as an administrator to make the changes... thing is, there is only a single user account on this computer and it is configured as an administrator.

  You will need to enable the built-in Administrator, connect to it and then run analyses of malware comprehensive here.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]

  Remove the DVD and start up in Windows. You will now see an icon for administrator on the Welcome screen. Open a session.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• To install the updates from this site, you must be logged on as administrator?

  To install the updates from this site, you must be logged in as an administrator or a member of the Administrators group on your computer. If you use Windows XP, you can see if you are an administrator by clicking on user accounts in Control Panel.

  I am logged in as administrator.

  Hello

  1. when exactly you get this error message?

  2. What is the full error message do you get?

  3. the updates you are trying to install?

  4. what browser you are using to install updates?

  I suggest you to see link below and check if it helps.

  http://support.Microsoft.com/kb/316524

  Hope this information is useful.

• Why do I get the access denied error message when you are logged in as administrator?

  "Error" failed to create the file 'C:\Windows\Fonts\[font name]. " Access is denied. "

  is received when I try to install a font by being logged on as administrator (I'm the only person who uses this)
  computer with password protection guest no account)

  or when I use WinZip the fonts folder is not available

  The fonts folder is blocked with a "read-only" access  I can't find any way to change the permissions on the folder (there is no security tab), and any attempt to change the status of reading is has met an insufficient privileges error message.  I notice that the fonts have been added during the last few days several times but I have nothing personally for it - he did alone (how I don't know).  I admit be baffled by your inability to add fonts using your CD (even though I'm reasonably sure it's read-only permission which is at the origin of the problem). I use Vista Business SP2 32-bit and my comments were based on it.  I never really tried to install fonts on my system, so I don't know if I would have the same problem - I presume that I would give for the same reasons.  The article I posted http://windows.microsoft.com/en-US/windows-vista/Install-or-uninstall-fonts explains how to install individual fonts in formats of special fonts - it does not how to do when you use a CD with an install button.  Have you tried right-clicking on the button install to see if it brings up the run as Administrator option (it probably won't)?  Here is another article on how to install fonts: http://www.lytebyte.com/2007/07/03/how-to-install-new-fonts-in-windows-vista/.  If you link to the CD player will be able to see the individual fonts and "select all" or according to which you want to install - instead of using the installation with the CD button (if you can find the right folder (s)).  Here is an article from third on the installation of the http://www.windowsreference.com/windows-vista/how-to-install-fonts-in-vista/ fonts that suggests using the install button should work as should drag / drop it into the fonts folder - thought we seem to be having trouble with these procedures (and I think he did the permissions block which I can't imagine why he's here or why there is no security tab allows you to adjust).

  Maybe someone with more knowledge (like Engineer Support or an MVP) see this thread and respond with a solution.  In the meantime, I'm puzzled.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.