Can't 'open with' LR3.6 in Win Explorer

Similar Questions

• Open with options: I want to add a new application to the list right click on file-> open with and rearrange the list so my search app is first. I know that I can use open with-> other and select any application, but it takes too much time since I u

  I want to add a new application to the list right click on file-> open with

  and also reorder the list so my search app is first / top of the list.

  I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.

  Basically, I'm looking for a configurable way configure open with, something more to send to Windows.

  Thank you very much for all the advice offered.

  The operating system, not you, not control that open with the menu command.

• All of a sudden, I can't open a mov.file with quicktime player. The file has had 14G I click on the file and the answer is that I can not open with qtp try other wit

  All of a sudden I can't open a file with 14 g movie mov. When I click the icon QuickTime Player the answer is to try other versions but to no help t nt.

  He opened before? Whence this file?

  Try to open this file with VLC. If she is playing, press command-I, click on Codecs and post a screenshot.

• Internet Explorer cannot open a SPECIFIC Web site, or I can't open with Firefox

  I can't open a website with Internet Explorer (or Firefox, by the way)...

  	Internet Explorer cannot display this webpage

  Thanks for your help.

  What is the site? After the URL.

• I can not open with CS 5.1 RAW files that I took on a Canon 5 d Mark iii

  I just got a Canon 5 d Mark iii camera and I always shoot in Raw. I downloaded them on my computer and when I went to open them in Photoshop CS 5.1 it tells me it is not supported by the installed version of Camera Raw. I tried to do an update and it still does not work. I'm helpless as to where I start. Can someone please help me with this?

  Make sure you have ACR installed 6.7 it may open with her.

  Devices supported by Adobe Camera Raw

  EOS - 5 d Mark III

  CR2

  6.7, 7.1

  4.1

  Adobe - Photoshop: For Windows

  Adobe - Photoshop: For Macintosh

• Can't 'open with... '. InCopy.exe' in InCopy CC 2014 for Windows

  To say I'm frustrated would be friendly to Adobe... I'll really try to remove my sarcasm and criticism how incompetent programmers of Adobe and program, managers should be to allow these problems to exist...

  I have a few documents InDesign (.indd) that I want to click on and the InCopy value as default program. After some trial and error, on both systems, I was able to adjust the registry to get this working.  On the third, so far, I've tried:

  1 reinstall Incopy - did not work

  2. copy the InCopy.exe to WWXXYYZZ. EXE - and although it allows InCopy appear in the list of "other programs", it does not open. Then...

  3. I tried the registry WWXXYYZZ. EXE and replace all instances with InCopy.exe (why I copied it this weird name in the first place - the easier the registry search - it did not work.

  4 published the following registry locations to make sure that they stressed InCopy.exe - but every time I have change for this exe, Windows will not open.  I don't know Adobe want to blame Microsoft for this, but when EVERY SINGLE OTHER executable (and even the renamed copy) CAN be assigned to open it using the 'Open with' dialog box, I let believe that Adobe programmers decided not to do the right thing by saving the exe file with the registry - or recorded to prevent from appearing in this menu , for some reason any.  SO HOW CAN I FIX THIS!

  Edited registry (reset to point to InCopy.exe) locations:

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.indd\OpenW ithList]

  "a"="InCopy.exe".

  "MRUList" = "a".

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.indd\UserC post]

  'Progid"="Applications\\InCopy.exe '.

  [HKEY_USERS\{ReplacedGUID}\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.in dd\OpenWithList]

  "a"="InCopy.exe".

  "MRUList" = "a".

  [HKEY_USERS\{ReplacedGUID}\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.in dd\UserChoice]

  'Progid"="Applications\\InCopy.exe '.

  [HKEY_CURRENT_USER\Software\Classes\indd_auto_file\shell\Read\command]

  «"@= 'InCopy CC 2014\\InCopy.exe\ \"C:\\Program Files\\Adobe\\Adobe' \"%1\»»

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.indd\OpenW ithList]

  "a"="InCopy.exe".

  "MRUList" = "a".

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.indd\OpenW ithProgids]

  "InDesign.Document" = hex (0): "."

  I'll say it again - HOW DO I TROUBLE INCOPY to OPEN YEAR INDESIGN DOCUMENT BY DOUBLE CLICKING? (and Yes, I'm not that screaming!)

  No thank you completely useless people at adobe, I got that work - I found a registry key that had the previous version of InCopy and once I deleted, I could now do a right click and 'Open with' InCopy and affect permanently.

• Can't 'open with... '. "in Photoshop Elements 10

  I improved PE9 to PE10 and then uninstalled PE9. When you use PE9 (and seized PE8) I could right-click on a photo and select 'open with - Photoshop Elements 9. Since the upgrade to PE10 I am unable to do this is to say "Photoshop Elements 10' does not appear in the"Open with..."list ». I use Win7 64 bit.

  Click the browse or choose button and navigate to the aspplication Editor

  C:\Program Files (x 86) \Adobe\Photoshop elements 10\PhotoshopElementsEditor.exe

• Can't see anything in network in Win Explorer #2

  I tried to answer the technology last July, but no response so to trigger this problem recently, I'm it reposting here.

  Network Win Explorer shows nothing, including the local computer.  Otherwise, the network works fine because Outlook on the affected computer can open the PST on the other computer, and the other computer can see the shared folders on the computer. Both are newly built Win 7 Pro SP1 machines. Updates are ongoing.

  Yes - we have checked the settings sharing advanced and discovery network is on and all the other settings are good.  No error message.

  A technician responded with:

  Method 1:

  I suggest to start the computer in safe mode with network and check if the problem persists.

  Step 1:

  See the link to start in safe mode.

  Startup options (including safe mode).

  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

   

  Step 2:

  If your computer runs fine in safe mode, I suggest you perform the clean boot.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

   

  Method 2

  I suggest you follow the steps described in the following Microsoft article.

  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-see-other-computers-on-my-network

  That and some how simply showed once again without knowing what caused the problem.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------

  A month later, all items under Network disappeared again.

  Network discovery is on.

  Made a boot safe mode with networking and nothing comes in network in Win Explorer.

  Other network connections work fine.

  The affected computer can print to the network printer and open the PST to Outlook from the network. And another computer can see the shared folders on the computer.

  As a solution, I traced the My Documents folder on the second computer by typing the path, and it worked. Of course the function go to map a drive showed nothing as part of Windows Explorer.

  I had done a vast overhaul of the network, and I'm sure that we looked under network in Win Explorer because we changed the names of computers and fixed the Outlook profile so that customers could more easily identify which computer was.

  Since it just happened again seemingly out of nowhere, we did a scan of this computer with MS Sec Essentials full virus/mw and found nothing.

  Thank you

  Bob

  Thanks Bob to keep us up-to-date on the State of the question. Please let us know if the problem persists, we will be happy to help you further.

• Can't see anything in network in Win Explorer

  Network Win Explorer shows nothing, including the local computer except the router [Luxul xbr-2300 company double-wan] which is kind of weird because I've never seen a router appear like that.  Otherwise, the network works fine because Outlook on the affected computer can open the PST on the other computer, and the other computer can see the affected computer. Both are newly built machines Win 7 Pro.

  Yes - we have checked the settings sharing advanced and discovery network is on and all the other settings are good. The customer says it worked very well and it was working fine when I left it there 3 days, but that night she 'magical' stopped working and we know how it goes.  :-)

  I've not seen this problem before and can't think what to do except completely remove the network and uninstall the NIC drivers, reboot, install NETWORK card drivers and set up the network from scratch.

  Any ideas?

  Thanks in advance.

  Hello

  Thanks for posting your question on the Microsoft Forum.

  Did you do last changes made on your computer?

  Receive you error messages, if so, what is the exact error message?

  I suggest you to try the steps below and check if it helps.

  Method 1:

  I suggest to start the computer in safe mode with network and check if the problem persists.

  Step 1:

  See the link to start in safe mode.

  Startup options (including safe mode).

  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

   

  Step 2:

  If your computer runs fine in safe mode, I suggest you perform the clean boot.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

   

  Method 2

  I suggest you follow the steps described in the following Microsoft article.

  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-see-other-computers-on-my-network

  Please let us know if the problem persists. We will be happy to help you further.

  Thank you.

   

• Why firefox can not open with the default profile. It should be renamed?

  trying to install "malwarebytes" for extra protection, the Norton toolbar on firefox has been reduced in size by losing my option "Vault". This prompted reinstalling on securities Notion which then prevented the opening of firefox. Internet Explore works well but I use firefox for years so why change. Firefox won't open (even after being uninstalled and downloaded and reinstalled. The message 'your firefox profile cannot be loaded, etc.' following the instructions of your forum, I locate a profile with the word 'profile' embedded file. The word "profile" in the flow path is preceded by a weird name (such as a foreign name). Path =
  'C:\Users\Owner\AppData\Roaming\Mozilla\Firefox\Profiles\bzjajhor.default-1419035389504 '. This file needs to be renamed and can they?

  Please help me to go back to firefox. Thank you

  Do not rename a profile folder.
  It seems that there is a problem with the profiles.ini.

  See:

  • https://support.Mozilla.org/KB/how-run-Firefox-when-your-profile-missing-or-inacc

  This is usually caused by a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.

  • Windows: %AppData%\Mozilla\Firefox\
    C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • Linux: ~/.mozilla/firefox/
  • Mac: ~/Library/Application Support/Firefox /.

  You can use one of them to make Firefox/reuse to create a new default profile:

  • Remove the profiles.ini file to force Firefox to create a new default profile
  • Use the Profile Manager to create a new profile
    Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Account of Vista standard user will not open programs that more, can only open with the administrator account

  Whenever I try to open a program on a standard user account, a window opens asking "what program you want to use to open this with?", which is of course less useless.  I can open all programs with the administrator account, but then I can't access files of the standard user...  What happened all of a sudden; We had a malware infection that is now deleted and who may well have caused the problem.  If I use the system restore, the malware will return?  Prefer not to use SR if there is a better solution...

  Hello

  Method 1: Run the fixit available in the link below

  Difficulty of the shortcuts of broken office with common system maintenance tasks http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2:  Follow the steps described in the article below and then check out

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If the problem persists, the user account may be corrupted

  Method 3: Follow the steps mentioned in the link below to fix the corrupted user profile
  

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• can I open with draw adobe illustrator file?

  I want to know if I can open a file to illustator (have or eps) with adobe draw. At least to see it.

  Yes you can.

  In your drawing paper, select the layer of the photo, then import them your from your CC files .ai file.

• How to export a Photoshop (Mac) file that can be opened with a PC version of the CAD software

  Hi all

  I'm trying to deliver a photoshop graphic to my friend w / a PC and a CNC machine it will use to cut out my chart.  Unfortunately, he has trouble opening the graphics that I send him, even though I tried all the standard formats (.pdf, .png, .tif, bpm).  What he needs is a .dxf or .dwg file that I think... And there are tons of ".". "PDF to DWG converters" out there (I've downloaded several).  Problem is, when I try to open my .pdf and then export and/or registered as a .dwg file, it saves in an empty file!  When I reopen the .dwg file to check it out, there is nothing there.

  For anyone who is interested to help me, here is a link to my photoshop file (it is reduced to 24 "tall and 48" wide):

  Dropbox - TheSpaceCastle_Logo2.psd

  And here is the PDF:

  Dropbox - TheSpaceCastle_Logo2.pdf

  Here I am pasting a .jpg image file: (the widget download told me that .pdf files are 'prohibited'... lol? It is a Forum of ADOBE.  Why a .pdf file could not?)

  

  Found the solution:

  I had my friend vectorize my original FIRST file in Illustrator and created a .ai file.  It was not a type of simple file conversion.  Then, she saved the vector, that she created as a .dxf file.  It is necessary to first vectorization.

  I don't know the exact process, she used to vectorize the file, but I'm sure that it involved the tracing of the image and the creation of a new vector ('path' in Photoshop?).

  I confirmed this morning with the designer CNC he managed to extract the file in the CAD software for its CNC machine, and it seems good.

• Firefox is adjustable so that it can be opened with a password?

  I thought creating a master password would do this, but it's not. I want to protect the saved information, i. e. income tax returns.

  Extension of profile password - but it is easily circumvented by opening Firefox SafeMode.
  
  http://NIC-NAC-project.de/~kaosmos/profilepassword-en.html#PPFF

  Your first line of defense against the curious eyes is the feature of user account to logon in Windows XP. Not all stored data that are created or saved through Firefox is actually saved in Firefox, but in your "user data" in Windows.

• Why my drive external hard demand to be reformatted... and how can I open with on reformatting

  my external hard drive requires all of a sudden to format in order for me to have access, but I don't want to do that because I will lose my data. How to solve this problem?

  Try to run, type: diskmgmt.msc

  Msc, R.click on the hard drive, select 'open '. If she refuse, L.click on the

  HD, go to actions, everyone, see if her select 'Activate' exists, if so, select it,

  close, try again to open...