Can't see my backup jpg and txt files.

Similar Questions

• How can I add "tags" to PDF and txt files?

  I made the leap from XP to Windows 7.  Under XP, I could edit metadata in almost any file and place "key words" even with the PDF files.  Windows 7 has done away with "Key words" and went to "tags".  I prefer this system, but what I find it horribly frustrating, is that there are several types of files which I can't add "tags".
  (1) is it possible to add "tags" to PDF (in a way that works with the search for system marking of Windows 7)?
  (2) if not, are there any workaround solution (3rd party downloads - who work in the Windows 7 system of tagging metadata)?
  (3) otherwise, it is something that will be fixed in Windows in the future.
  (4) what is the reason for the types of files such as PDF, txt, MP3 with no no not the capabilities of 'tag '?

  PDF and Adobe Acrobat Pro Extended 9.3.1 shell tools worked for me fine... the only issues I have found so far is that I can't add categories and comments... I can change the interface of Windows 7 only the following (which are enough for me): title, author, subject and keywords for Windows 7 keywprds real estate PDF. You can take a look here...

  http://Dimitrios-SPYROU.NET/WindowsExplorerandpdftags.aspx

  Good luck to all

  PS, Don't try to understand the names of files or folders... structure it should all be Greek to you because I am from Greece and they are real Greeks!

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I forgot security rescue and complete e-mail address. How can I see my backup email address or reset my emergency email address?

  I forgot security rescue and complete e-mail address. How can I see my backup email address or reset my emergency email address?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (141239)

• I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear

  I'm AT & T PACE router connected to Internet. However, I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear. I tried to use another network with the name of my network_ext and provide the same passkey that my router, but it was impossible to connect to the Extender.

  I would appreciate it, if I can get any suggestion/help to bind and connect to this extension of NETGear. I have WIndow7 system on my computer.

  Thank you

  Harshad João

  First, make sure that the netgear device is not a router.  An Extender is very good.  You can't have more than one router in a network.  Also make sure that if you use the router wireless integrated into your modem, the router ONLY in use.

  There is a very specific configuration for the Extender.  It should have come with detailed instructions.  If you can't find them, call Netgear for assistance.

• I have 2 accounts of adobe Setup and want to merge to 1. My Behance site is a different connection/e-mail than my creative cloud. So... When I'm connected to CC, I can't see my Behance site and updated. Can you please help?

  I have 2 accounts of adobe Setup and want to merge to 1. My Behance site is a different connection/e-mail than my creative cloud. So... When I'm connected to CC, I can't see my Behance site and updated. Can you please help?

  Please contact our support staff from the following link for assistance on this subject: https://helpx.adobe.com/contact.html

  (be sure to connect to adobe.com with your Adobe ID first)

• Lightroom CC: Develop module: I see only a blue box with a cross inside. If I select before / after, I can only see the picture before and not after after is displayed as a blue box with a cross inside. I can make adjustments, but I don't see them because

  Adobe Lightroom CC:

  Develop a module:

  Instead of my photos were corrected, I see only a blue box with a cross inside.

  If I select before / after, I can only see the picture before and not after (the corrections).

  After appears as a blue box with a cross inside.

  I can make adjustments, but I do not see them because the image after is not visible, it is a blue box with a cross inside.

  Thanks in advance for your help.

  Disable the option of processor graphics use in the performance of the LR preferences section.

• My recovery file is full and more limit. How can I remove back unnecessary ups and delete files.

  My recovery file is full and more limit. How can I remove back unnecessary ups and delete files.

  I tried below it gave me an error. Kindly tell me what steps to take to remove unnecessary files and add additional space to my recovery file.

  Thanks in advance

  RMAN > target /.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-00558: error occurred during parsing of order entry

  RMAN-01009: syntax error: found 'target': expected an a: "advise, allow, a.

  lter, backup, @, catalog, change, configure, connect, convert, copy, create, cro

  sscheck, delete, drop, duplicate, leave, flashback, grant, host, import, list, mo

  UNT, open, print, quit, collect, register, release, repair, replace, report, res

  HE, restoration, resync, revoke, run, sending, game, show, stop, coil, sql, start

  pass, carry, cancel the registration, update, validate, {,'

  RMAN-01007: line 1 column 1 file: entry standard

  RMAN > delete archivelog all;

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the delete command at 09/02/2014 20:48:19

  RMAN-06171: not connected to the target database

  RMAN >

  Hello

  If you could not ask about your db, you can watch in the log_archive_dest_1 parameter, which is in the init.ora file, to know where are your archived log files.

  my previous post would not be the solution to your problem, if so you can manually delete the archived logs and then delivers the command of rman below

  overlap archivelog all

  Concerning

• can I sync my microsoft word and PDF files on my palm?

  I'm new to the family of Plam and I have a question.  I use my Palm for bussiness because I can't do most of us, but can I sync my microsoft word and PDF files in my Palm?

  I use the contract all the time and I need to show a contract from time to time, I don't know how to synchronize those files on my palm... is the windows mobile palm?

  If I could get as much information as possible on all the how of that would be great!

  Thank you and I have a lot of aprecaite it!

  Paul

  Hey Paul, welcome to the forums of Palm.

  Your Verizon Pre Plus runs a mobile operating system called webOS HP/Palm.  The current version is the 1.4.5.  The phone can connect to a Microsoft Exchange Enterprise Server.  When this happens, it uses a timing called "Exchange Active Sync" technology, but your phone does not have the operating system Windows Mobile or Windows Phone.

  Synchronization of Microsoft Office and PDF documents from sort of an adventure the Pre debuted more than 18 months ago.

  DataViz, the application of the notice of Doc officials, was partially acquired by RIM, the fact of BlackBerry and decided to not release a full version of Documents To Go for webOS devices.  Palm in collaboration with manufacturers of QuickOffice to provide the full support of the office for webOS documents in the future.

  For now, if you put Office and PDF documents in the area of storage USB of your pre, see Doc or PDF is to find them and allow you to view them on your Pre.  I put all my documents in a folder simply called 'Documents '.

  If you connect the charging/sync cable for your pre and then attach to your Mac or Windows PC, you will have a choice to activate the USB Drive mode.  When you do, you will be able to work with your pre as you would with a standard USB.  Eject the meadow of your desktop PC when you have finished and you should be ready.

  Hope that helps.

  Alan G

• How to make my Jpg and RAW files into version sets (PSE10)

  I take the two jpg and RAW files on my camera so most of the time, I am happy with jpg and do a little editing, but from time to time I need to really work on a picture which is the place where the RAW file is very convenient. In my photo well, I have 2 of each image displayed is to say the jpg and RAW. How can I get it appears only the jpg and RAW either hidden, or as a set of version collapsed? Have 2 of each photo makes the photo well look poorly maintained and full of duplicates.

  Help appreciated.

  You have to stack pictures. Sets of version does not apply here.

• Link adjacent JPG and CR2 files

  Most of my JPG and CR2 adjacent treats files in a single file when you view in Lightroom. However, I have a folder that, for some reason, the treats like two photos - they are not connected. How can I fix photos in this folder for adjacent JPG and Raw files can be considered as a simple photo?

  Thanks for any help.

  You can promote the crude to the top of the stack. Probably if you expand all stacks, then filter to just the RAWs and then SHIFT - S to move them all at the top of their respective batteries. I never shoot RAW + jpeg, so I have nothing to test on.

  Jao

• Power outage required that I put in place a new user in Vista that I did. Now I can't find the original user and associated files. All files seem to be missing. Help?

  Laptop must have been left on. Last night power Outtage. I went back and put the computer to find guests requiring that I created a user, I did. Now, I can't find the original user and all files seem to have disappeared.  Have Vista

  Hello

  1. don't you make changes on the computer before this problem?
  2. do you remember the exact and complete message on this line?

  Check if you can find the user original files of accounts in the following path:
  C:\Users\[user account name]

  The article could be useful to you.
  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• separating the jpg and raw files after import into lightroom 5

  I would like to separate my jpg and raw files as soon as they are in lightroom (right after importation), so that all my jpg files are 1 after another on the Filmstrip below and my raw files are one after the other. is this possible?

  In the grid view of the library, on the tool bar (T), replace "sort:" to "File Extension."

• How can I see my hard disk and what it contains

  my macbook air has been pop notifications indicating that the startup disk is almost full, which ive just ignored.

  now it says that my hard drive is full and that it cannot receive messages more.

  How can I see which takes all the space

  One way is to click the Apple logo in the upper left corner, and then click this Mac > storage (on the top row).

• How can I see end keyframe markers (and their Bezier handles) in the scenario of control effect?

  Bézier control disappears when a keyframe is at the end of the timeline:

  

  But if I move it a framework it appears:
  

  But there must be a better way.  I don't understand why I can't see beyond the last image or before the first image when affect the Bezier controls.

  Does anyone know how to display the timeline effect fully?

  Thank you in advance!

  Don't know what to tell you. With the Clip pin verified, may not go far enough to see the keyframe at the end of the clip:

  

  With PIN to Clip unchecked, I can:

  

  Something to check-

  so that this works, the clip you're watching may not be the last clip on the timeline (as there is nothing for the effects slider scroll to or show after this clip) so if this is the case, add a few black or something after it and see if that helps.

  MtD