Can't see secondary reading devices in sound?

Similar Questions

• Can't see the read messages in my Inbox even if the filter is not turned on.

  I can only see unread in my Inbox e-mail messages even if the living part of the filter IS NOT set to unread. When I read an unread message, it is then no, but when I close Thunderbird and go back, only unread messages appear and the message read disappears. This isn't a problem in one different folder other than the Inbox.

  Try the button AppMenu - View - Messages - all

• After new OS installation can not see all the devices connected on satellite

  I recently reformatted the computer because I had a lot of problems, after doing so I tried to connect to the internet, on that I just plugged the ethernet cable, the light on the modem was flashing and I opened the network connections, but the network device was not there. e.g. connection to the LAN 1, etc.

  I also have another problem. I opened the Device Manager and could not see any of the connected devices.
  can anyone help?

  HI Kamal,

  If you have reinstalled just your system from the recovery CD then you will also need to re - install one of your devices (including your Internet connections) installation CD that came with them.

  The recovery CD contain only the Windows base operating system, as well as the software provided to Toshiba and to my knowledge, this does not include the ISP software or connections.

  Kind regards

• How can I see what devices are "authorized" computers

  Is the iPad and iPhone connected by a common appleID included automatically?

  How can I see what other devices are 'allowed' and could be deleted, for example, a computer has been replaced and the device wasn't "deauthorized" before you replace and may not be available.

  1 iOS devices do not use the iTunes Store authorizations.

  2. a list is not available at your end. If you are off permissions, click here for more information.

  (140367)

• No sound icon by volume in the taskbar. Can not see the box in the Panel... areas are greyed out. has tried windows Fixit... does not solve the problem

  My knowledge is very limited when it comes to computers, and I don't have a clue when it comes to walk through the bios, etc. Can you help me in Re-establishing sound on this computer. I can assure you that your patience will be judged.

  My hard drive has been cleaned and reformatted about three weeks ago, and I have not all sounds now.

  My OS:

  Windows XP - Pro, Version 2002, service pack 3.

  Is the motherboard: Asus M2N - SLI Deluxe

  Graphics card: Nvidia GeForce 7300 SE 7200

  CPU: AMD Athelon 64 X 2 Dual Core 4200 +.

  IDE controllers: ATA/ATAPI

  Standard dual channel PCI IDE Controller GS

  I bought one online drivers scanner / program, identified the drivers missing, downloaded from nvidia and reinstalled. still no sound.

  Upgraded hardware, Device Manager, I see 3 yellow dots to mark:

  1. audio Device on High definition Audio Bus.

  Details; HUHUDIO\FUNC_01 & VEN_11D4 & DEV_198B & SUBSYS_104381F6 & REV_1002\4

  2. properties of the unknown device on PCI Bus.

  Device ID:

  ACPI\ATK0110\1010110

  3 Dell USB Smart card keyboard.

  "Thank God" Friday, December 31, 2010 11:40

  My knowledge is very limited when it comes to computers, and I don't have a clue when it comes to walk through the bios, etc. Can you help me in Re-establishing sound on this computer. I can assure you that your patience will be judged.

  My hard drive has been cleaned and reformatted about three weeks ago, and I have not all sounds now.

  My OS:

  Windows XP - Pro, Version 2002, service pack 3.

  Is the motherboard: Asus M2N - SLI Deluxe

  Graphics card: Nvidia GeForce 7300 SE 7200

  CPU: AMD Athelon 64 X 2 Dual Core 4200 +.

  IDE controllers: ATA/ATAPI

  Standard dual channel PCI IDE Controller GS

  I bought one online drivers scanner / program, identified the drivers missing, downloaded from nvidia and reinstalled. still no sound.

  Upgraded hardware, Device Manager, I see 3 yellow dots to mark:

  1. audio Device on High definition Audio Bus.

  Details; HUHUDIO\FUNC_01 & VEN_11D4 & DEV_198B & SUBSYS_104381F6 & REV_1002\4

  2. properties of the unknown device on PCI Bus.

  Device ID:

  ACPI\ATK0110\1010110

  3 Dell USB Smart card keyboard.

  Go to this page and download the drivers for your motherboard:

  http://www.ASUS.com/product.aspx?P_ID=szSFtrap7crpBaQE

  --

  Roy Smith
  Windows 7 Professional
  Postbox 2.1.0
  Tuesday, January 4, 2011 22:09:51

• I can see is more devices in Windows 7 64 bit device manager

  I just got a laptop (2.67 GHz quad core i7).  It had Windows 7 Pro 64 bit responsible.  I tried to clean up some unwanted 'free' software.  When I went to the Device Manager to check on a device, nothing was in the window.  There are no hidden devices.   Everything seems to work, but I don't see all the devices in the window.

  Hello

  What is the brand and model of the computer?

  When you open Device Manager, no devices appear in the list. Instead, a blank window appears.

  This problem occurs if the Plug-and-Play service has been disabled (disabled).

  Method 1:

  To resolve this problem, set the startup type for Plug-and-Play on automatic. To do this, follow these steps:

  a. Click Start and run, type services.msc, and then click OK.

  b. double-click Plug-and-Play. If you receive a Configuration Manager message, click OK.

  c. in the Startup Type list, click Automatic, and thenOK.

  d. close Services.

  e. restart the computer.

  Method 2:

  The other reason, Device Manager may be empty is because there are some security issues with the registry key.

  Note: serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  a. click on start-> Run-> type regedit.exe.

  b. search for the following: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum

  c. now right-click on Enum and click Permissions.

  d. click on the Add button and type everyone, and then click OK. Check the box allow next to the reading for everyone. Now click on add and enter the system. Check the box allow next to the read and full control to the system.

  e. the two check boxes under allow must be selected when you highlight the system. Also be sure to click on the Advanced button after adding the two users and select Reset entry permission on all child objects with the entries displayed here and that apply to child objects. Click OK.

  f. restart your computer now and check if the problem persists.

  Method 3:

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Response with status so that we can help you.

• Can't see audio or track sound on the Timeline

  Hello

  I edit a video clip in Prime Minister 11 elements which usually takes an hour of video images in the scenario and audio files (in green) below. I can normally see those audio files on the timeline, remove them and change them.

  I now reopened the PREL file and audio files have disappeared. Audio files, I had that accompanied the video scenes are now part of the clip - so the work I did previously was still valid - but I can't change them because they are no longer on the timeline (but the video itself is still there).

  The main change I made is to move from Win 7 to 10 to win (this is the first time I opened Prem 11 in Win 10 and discovered the absence of audio files), but it may be unrelated. Now I get the following message appears on the screen:

  

  which, again, may be unrelated. In all cases, the Manager of peripheral devices, graphics cards, shows that I have an Intel G41 Express Chipset (Microsoft WDDM 1.1) adaptor, not Microsoft GDI Generic 1.1 which means the message on the screen. In all cases, the device manager tells me that I have updates.

  Again once the upgrade to win 10 and the issuance of the graphics card may have nothing to do with me not being able to see my green audio track. Is it possible, however, to get the way back so that I can change different things?

  Thank you!

  Steve

  Steve

  Just a quick note... even if you can lower the Volume to - 59 dB and into infinity, the highest reading dB is 6.0 (+ included). If you typed dB to + 10.0, you would get 6.0 dB (without sign +).

  I think we're OK on that now.

  Best wishes

  RTA

• can't see the devices in my macbook pro

  I can't see the devices in my macbook pro

  If you mean they are not recognized in iTunes...

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• I can't see my iPHone on my mac pro when using Airdrop book, even though Airdrop is on both devices. Any suggestions?

  I can't see my iPHone on my mac pro when using Airdrop book, even though Airdrop is on both devices. Any suggestions?

  I assume that the Air Drop is enabled in the iPhone and that your devices are regarded as Favorites?

• How can I have my network monitoring airport to see all connected devices?

  I would like to change the preferences of my Fritz! 1750th Repeater. I'll pass the LEDs of the question, but I can't access the device as http://fritz.repeater.

  Thank you for helping me!

  Sorry, we can not help you on a Fritz! Question of Repeater, but if you want an answer to your question of... How can I have my network monitoring airport to see all connected devices? ........

  On your MacBook Pro...

  Open Finder > Applications > utilities > AirPort Utility

  Hold down the option key on your Mac when you double-click on the image of your AirPort Base Station (we assume that you do not have an AirPort Base Station)

  A summary sheet opens to show all Wireless Clients that are currently connected to your network.

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• can not see Add targets and devices in the Project Explorer

  Hello!

  I think I have a strange question. I have the evaluation version of Labview 2010. I am trying to add my cRIO 9004 to a project. I'm just trying to follow the instructions in the getting started with manual cRIO. It is said, add crio to the project by project root right clicking and selecting NEW > ADD TARGETS AND DEVICES. The problem is I can't see the link to the NEW, but once I click that I see not a link under "add new target or device" appear, instead, I see the dialog box to open a NEW FILE LABVIEW appear. everywhere in distress forum/basic knowledge/support of shooting and get started articles have mentioned project root right click > select NEW > select Add a target or peripheral >, as if she IS supposed TO APPEAR STANDARD in all new projects! But I'm not! I do not understand what Miss me. The version of software that I have are below:

  the cRio:

  OR VISA 5.0

  NEITHER RIO 3.0
  RT LV 8.6

  and he allied himself with what I installed on my host.

  I can communicate with the device of cRIO times using MAX as well as ping at the windows command prompt command.

  Any help would be great!

  Thank you!

  Rajesh

  After you have installed the evaluation version of LV 2010, you reinstall all of the other drivers, as for the cRIO?

• Bluetooth Vista Assistant can't see all devices

  Hello. I'm having a problem that began recently. The bluetooth in 32-bit vista Wizard can't see devices trying to connect with. I can connect to nokia pc suite well and I can receive a file from a device, but I can't send anything because he is unable to see my phone or any other phone.
  I recently installed windows 7 64-bit and dual boot with vista 32 bit. I installed 64-bit for the (hp bt450) bluetooth adapter drivers and it works great on windows 7, see all devices, that I try to connect. I use drivers correct 32 bit with vista with the latest firmware.
  Could the second os cause this problem somehow?

  shalinnathan143,

  You have a similar but different problem.  We want to stay focused on the original question here.  Trying to meet all of you in a thread will only complicate things no one will know who meets who what about.  Please repost your problem as a separate issue.

  Thanks and good luck.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Wireless dead after reinstalling Windows. Device Manager can't see the map

  Hello

  I have a laptop model Lenovo 3000 N200 14W 0687.  It was teeming with virus so I wiped the hard drive and installed Windows XP Home Edition from scratch.  Now Device Manager can't see the wireless adapter and Wireless does not work.  I tried to download and install the Wireless driver on the Lenovo site (I don't have a disc of relocation); but I got errors.  Anyone know what could cause this and a fix?

  If you are interested, here are the details of what happened when I tried to download and install the drivers:

  Device Manager gives me the adapters three following network:
  Network adapter 1394
  Broadcom NetLink (TM) Fast Ethernet
  MAC bridge Miniport

  None of which resemble wireless cards. So I used the link http://consumersupport.lenovo.com/ot/en/DriversDownLoads/Drivers.htmlto try out. Enter my serial number L3X3516 took me to a support page client lenovo that says

  Total 13 drivers need to be repaired/upgraded, 9 drivers in need of repair, please click the "Download" button to begin to repair

  One of them was this:

  Intel (r) PRO/Wireless 3945ABG Network Connection

  I downloaded it and it says: 'the contents of this file cannot be unpacked. the executable file that you are trying to run has been damaged. You can get another copy of the file, verify its integrity, and then try again"

  So I used google to find this site:

  http://www.getpcmemory.com/drivers/download-Lenovo-3000-N200-type-0769-notebook-Windows-XP-Vista-DRI...

  who told me that my computer is a Lenovo 3000 n200 Type 0687.

  Using google once again, I found this page:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-68011

  which was another version of the driver. So I downloaded and unpacked it. I then took a glance at the .txt guide provided with the driver. It is said:

  1. Start Windows XP and log on with administrative privileges.
  

  2. Double-click the driver package to extract it to your hard drive.
  

     The default location is C:\SWTOOLS\DRIVERS\WLLANINT
  

  3. Click Start, then click Run...
  

  4. Specify SETUP.EXE with the full path name where you extracted the
  

     package in step 2, and click OK.
  

     Example: C:\SWTOOLS\DRIVERS\WLLANINT\SETUP.EXE
  

  5. Follow the instructions on the screen to complete the installation.
  
  Unfortunately, there is no setup.exe file in the folder so this has failed.
  
  Regards,
  
  satherb
  

  configuration > wireless lan support > enabled

  for display drivers, re - install it: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67978

  and on Device Manager, please, provide the device id. (eg PCI VEN_8086 & dev_2929 & subsys)

  or if you know which wireless adapter you have, download drivers from the download page, then re - install.

• HP Probok 450 G2 Bluetooth can not see my devices bt 8.1 Windows pro x 64

  Hi all!

  I have a problem!

  device: Hewlett Packard Probook 450 G2 (J4s43EA)

  operating system: windows 8.1 pro x 64

  Windows updates: the latest

  BIOS: last

  drivers: on the hp device driver site

  problem: I can see the BT icon near the clock, I turned on the visibility on the laptop and on my 2 android phones, but the pc can't see the phones and phones can not see the laptop.

  So I can't use bluetooth on probook g2 450!

  The Bt on the laptop is only research, but no results...

  What is the problem?

  OK I have solved my problem

  first:

  I uninstalled windows 8.1 pro x 64 and installed windows 7 x 64 home premium

  I have installed all windows updates and drivers of all Hp softpaq listed requible.

  But in the management of devices in bluetooth driver driver default winodws.

  HP softpaq don't ' found realtek bluetooth driver.

  Another problem has been the site of download of hp for this computer does ' t contain the last BT driver.

  Fortunately, I searched this in google:

  and found success!

  CLICK HERE TO DOWNLOAD

  I installed it.

  and this was the solution!

  After installation and reboot, there is another problem:

  the pairing is works, but don't see the send-accept option.

  There is a solution for this problem on the LENOVO site!

  Yes lenovo isn't a very helpful company like HP.

  Lenovo solution:

  CLICK HERE

  Since this all straight!

  Thanks lenovo, thanks google!

  Maybe this works in windows 8.1...

  Maybe...