Can't ssh on Mac OS VPN server

Similar Questions

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Y does it does anyone know how many client can connect at the same time on the Microsoft VPN server?

  Hello everyone

  Is there anyone know how many client can be connected same time on microsoft VPN Server?

  Thank you

  Original title: VPN Windows Server 2012

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I get all the connections on a windows 2008 r2 through a VPN server?

  How can I route all internet connections on a Windows 2008 Standard r2 through a VPN server?

  When I try to run just on an account administrator through regular networking, it hits the vpn in offline mode when someone else that the administrator is trying to distance in.

  I have to use a vpn, because I'm on a school network and have permission to use the server, but I have to do my own static IP address.  My solution for the static IP address, he ran through a VPN with data unlimited which ended with a dedicated static IP address.

  Everything on the server works when comes the administrator will connect.  Site Internet/game/file Services/Ect.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I want to know how to put my vista as a vpn server, so I can connect from work?

  I have Vista Home Basic! and I want it to be VPN server so this way I can access resources on this subject. After researching I found that a customer who wants to set up a private network virtual assigned must address PUBLIC IP. Please ask me I would thank you for it!

  None of the editions of Windows Welcome in native mode allow remote connections from an external PC.  In addition, your own home network router should protect your LAN House of this type of connection.  If you want to connect to your home PC, you need to set your router firewall to allow incoming connections on a port of your choice (not standard ports for incoming connections) and you will ned to install a program such as VNC to accept the incoming connection.  Alternatively, you can buy a service like GoToMyPC (http://gotomypc.com/) that will secure your home firewall courses.

  Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• is conneting to the vpn server can increase my download speed?

  I got cyberghost vpn,

  connection to the different vpn server can increase my download speed?

  Hi Amelia,.

  Thanks for posting in Microsoft Community!

  The question you posted would be better suited in the TechNet community.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps!

• Unable to connect to the VPN server

  Hello

  I'm on Sierra, iOS macOS 10 and Mac OS Server 5.2 (on a Mac mini).  (All dated September 21, 2016)

  Because PPTP is no longer supported, I am trying to create L2TP.  Unfortunately, when I try to connect to the server, I get the error "the VPN server has failed. Please check the server address and try to reconnect. »

  I do not think it is a problem of networking: back to my Mac is not enabled, the appropriate ports are transmission (UDP 500, 1701, 4500) and server says that the service is accessible.

  When I check the logs from the server after a connection attempt, I find:

  21/09/16 21:08:09.994 raccoon [75993]: can't find configuration.

  21/09/16 21:08:13.285 raccoon [75993]: can't find configuration.

  21/09/16 21:08:16.578 raccoon [75993]: can't find configuration.

  21/09/16 21:08:19.884 raccoon [75993]: can't find configuration.

  Any suggestions?

  Does anyone know where the configuration file is supposed to be on the server, so I can look at?

  Thanks for your help!

  Hi Rick,

  -Check that the folder/etc/racoon exist and the folder contains psk.txt and racoon.conf.

  -Installed with the operating system.

  Cheers, dwbrecovery

• Configure a VPN server on non-server version

  I have seen that it is possible to configure your Mac as a VPN server, even if you do not have the server version of Mac OS. Yosemite. Freeware such as VNC Enabler and VPN server Configurator can easily do that. So I tried. I forwarded your UDP, ports 500, 1701, and 4500 to the local IP address of my computer. I did the same for port 9 so I can wake on LAN. I made sure that IPSec, PPTP and L2TP passthrough are enabled (Linksys router). Nothing... does not work. The State of the VPN server says it is, but I can not connect from the outside. I can't wake the computer either, even if Wake for Ethernet network access is on. My IPS does not block these ports.

  Any idea?

  Have you checked to see if the ports are actually open? Check here http://www.yougetsignal.com/tools/open-ports/

  Also do you connect through a domain name or IP? If the domain name is set to the right IP?

  It works on the LAN if change you the server address to its local IP address?

• Access to the internal mail (Exchange) by centimeters remote VPN server

  Hi all

  I have a problem in the configuration of ASA 5510 to access my internal mail (Exchange) through remote access VPN server

  one... I have set up my D-Link ADSL router to port before the SMPTP (25) & POP3 (110) to the external interface of ASA 5510 (192.168.5.101 255.255.255.0)

  b. How can I configure ASA 5510 (using ASDM) to portforward (SMTP POP3 110 25) to my internal mail server with IP 192.168.50.2 255.255.255.0

  c. my internal LAN network (192.168.50.0 255.255.255.0) is coordinated at 10.1.1.0 255.255.255.224 for vpn clients

  d. my IP of mail server (192.168.50.2 255.255.255.0) will also be translated while clients are accessing content through remote VPN access

  e.What IP (Exchange of IP of the server (192.168.50.2) do I have to set up in Microsoft Outlook (incoming & outgoing mail server), vpn clients receive using a NAT IP 10.1.1.10

  Here's my configuration details of access remote vpn

  : Saved

  : Written by enable_15 at 13:42:51.243 UTC Thursday, November 27, 2008

  !

  ASA Version 7.0 (6)

  !

  hostname xxxx

  domain xxxx

  enable the encrypted password xxxxx

  XXXXX encrypted passwd

  names of

  DNS-guard

  !

  interface Ethernet0/0

  nameif outside

  security-level 0

  IP 192.168.5.101 255.255.255.0

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 192.168.50.101 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  !

  interface Management0/0

  nameif management

  security-level 100

  management only

  IP 192.168.1.1 255.255.255.0

  !

  passive FTP mode

  list of access inside the _nat0_outbound extended permits all ip 10.1.1.0 255.255.255.224

  allow a standard vpn access list

  outside_cryptomap_dyn_20 list of allowed ip extended access any 10.1.1.0 255.255.255.224

  vpn-ip-pool 10.1.1.10 mask - 255.255.255.0 IP local pool 10.1.1.25

  Global interface 10 (external)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 10 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 192.168.5.1 (D-Link ADSL router LAN IP) 1

  internal vpn group policy

  attributes of vpn group policy

  Split-tunnel-policy excludespecified

  Split-tunnel-network-list value vpn

  WebVPN

  xxxxx xxxx of encrypted password privilege 0 username

  attributes of username xxxxx

  Strategy-Group-VPN vpn

  WebVPN

  ASDM image disk0: / asdm - 508.bin

  don't allow no asdm history

  ARP timeout 14400

  Enable http server

  http 192.168.1.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-3DES-SHA edes-esp esp-sha-hmac

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  card outside_map 655535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  ISAKMP allows outside

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 3des encryption

  ISAKMP policy 10 sha hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  tunnel vpn ipsec-ra group type

  VPN tunnel-group general attributes

  ip vpn-pool address pool

  Group Policy - by default-vpn

  Tunnel vpn ipsec-attributes group

  pre-shared-key *.

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  management of 192.168.1.2 - dhcpd address 192.168.1.254

  dhcpd lease 3600

  dhcpd ping_timeout 50

  enable dhcpd management

  !

  Policy-map global_policy

  class inspection_default

  inspect the dns-length maximum 512

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  !

  global service-policy global_policy

  : end

  So can someone help me, how can I configure these tasks

  You can without problem

• Help with the easy VPN server with LDAP

  Hello

  I used to be able to set up our easy VPN server with local authentication.

  But now, I'm trying to use LDAP authentication to match with our policies.

  Can someone help me please to check the config and tell me what is wrong with him?

  My router is a Cisco1941/K9.

  Thank you in advance.

  Ryan

  Current configuration: 5128 bytes
  !
  ! Last configuration change at 13:25:16 UTC Tuesday, August 28, 2012, by admin
  ! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
  ! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
  version 15.2
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  !
  AAA new-model
  !
  !
  AAA group ASIA-LDAP ldap server
  Server server1.domain.net
  !
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authentication login ASIA-LDAP-AUTHENTIC ldap group ASIA-LDAP
  local VPN_Cisco AAA authorization network
  Group ldap AAA authorization network ASIA-LDAP-ASIA-LDAP group authorization
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  !
  No ipv6 cef
  !
  !
  !
  !
  !
  IP domain name domaine.net
  IP cef
  !
  Authenticated MultiLink bundle-name Panel
  !
  Crypto pki token removal timeout default 0
  !
  Crypto pki trustpoint TP-self-signed-765105936
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 765105936
  revocation checking no
  rsakeypair TP-self-signed-765105936
  !
  !
  TP-self-signed-765105936 crypto pki certificate chain
  certificate self-signed 01
  30820229 30820192 A0030201 02020101 300 D 0609 2A 864886 F70D0101 05050030
  2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
  69666963 37363531 30353933 36301E17 313230 36323630 39323033 0D 6174652D
  355A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
  532D 5365 6C662D53 69676E65 642D 4365 72746966 69636174 652 3736 35313035
  06092A 86 4886F70D 01010105 39333630 819F300D 00308189 02818100 0003818D
  C1B7E661 4893D83A EFE44B76 92BAA71A 6375 854 C 88 D 4533E51A 49791 551D8EF7
  F82E2432 E65B401D 27FE4896 2105B38A CB1908C1 9AE2FC19 8A9393C3 1 B 618390
  EE6CB1CC 5C8B8811 04FA198E 16F3297B 6B15F974 13EE4897 97270547 31 74270
  4590ACA6 68606596 97C5D4D5 462CACA0 CDDAC35A 17415302 CFD4E329 8E7E542D
  02030100 01A 35330 03551 D 13 51300F06 0101FF04 05300301 01FF301F 0603551D
  23041830 1680142E FF686472 569BCCF1 552B 1200 1 060355 5B660F30 D35060DB
  1D0E0416 04142EFF 9BCCF155 68647256 2B1200D3 5060DB5B 660F300D 06092 HAS 86
  01010505 00038181 00558F64 05207 D 35 AA4BD086 4579ACF6 BCF6A851 4886F70D
  1D0EA15B 75DBFA45 E01FBA5C 6F827C42 1A50DD11 8922F1E5 3384B8D8 8DD6C222
  0187E501 82C1C557 8AD3445C A4450241 75D771CF 3A6428A6 7E1FC7E5 8B418E65
  74D265DD 06251C7D 6EF39CE9 3 D FE03F795 692763 AE865885 CFF660A5 4C1FF603
  3AF09B1E 243EA5ED 7E4C30B9 3A
  quit smoking
  license udi pid CISCO1941/K9 sn xxxxxxxxxxx

  ISM HW-module 0
  !
  !
  !
  secret admin user name of privilege 15 5 $1 rVI4$ WIP5x6at0b1Vot5LbdlGN.
  ryan privilege 0 0 pass1234 password username
  !
  redundancy
  !
  !
  !
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  Configuration group customer isakmp crypto VPN_Group1
  xxxxxxxxxxxx key
  DNS 10.127.8.20
  pool SDM_POOL_1
  ACL 100
  netmask 255.255.255.0
  ISAKMP crypto ciscocp-ike-profile-1 profile
  match of group identity VPN_Group1
  authentication of LDAP-ASIA-AUTHENTIC customer list
  whitelist ISAKMP ASIA-LDAP-authorization of THE
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-ESP-3DES-SHA
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  !
  interface Loopback0
  IP 10.127.15.1 255.255.255.0
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  Shutdown
  !
  interface GigabitEthernet0/0
  IP xxx.xxx.xxx.xxx 255.255.255.224
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  IP 10.127.31.26 255.255.255.252
  automatic duplex
  automatic speed
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered Loopback0
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  local IP SDM_POOL_1 10.127.20.129 pool 10.127.20.254
  IP forward-Protocol ND
  !
  IP http server
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP route 0.0.0.0 0.0.0.0 GigabitEthernet0/0
  IP route 10.0.0.0 255.0.0.0 10.127.31.25
  IP route 10.127.20.128 255.255.255.128 GigabitEthernet0/0
  !
  Note access-list 100 category CCP_ACL = 4
  access-list 100 permit ip 10.0.0.0 0.255.255.255 everything
  !
  !
  !
  !
  !
  !
  !
  LDAP attribute-map ASIA-username-map
  user name of card type sAMAccountName
  !
  Server1.domain.NET LDAP server
  IPv4 10.127.8.20
  map attribute username-ASIA-map
  bind authenticates root-dn CN = xxx\, S1234567, OU = Service accounts, OR = Admin, OU = Acc
  DC = domain, DC = net password password1
  base-dn DC = domain, DC = net
  bind authentication-first
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line 67
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  transport telnet entry
  !
  Scheduler allocate 20000 1000
  end

  Router #.

  Ryan,

  It seems that you are facing the question where it is indicated in the section:

  Problems with the help of "authentication bind first" with user-defined attribute maps:

  * Then you are likely to see a failure in your authentication attempt. You will see the error message "Invalid credentials, result code = 49.  The newspapers will look something like the journals below: *.

  Which is the same error you see. Go ahead and replace in your attribute map and test again.

  If you remove the command "bind-first authentication' configuration above, everything will work correctly.

  https://supportforums.Cisco.com/docs/doc-17780

  Tarik Admani
  * Please note the useful messages *.

• Can't ssh ESXi 5 host

  I had to do a strengthening of security on a host computer and now I can't ssh in.  I can go back to what I did, but I want to clarify what line in the sshd_config file is the cause.  I'll list out what I have:

  The SSH server is enabled and running under Firewall and ssh and ESXi shell is running on the host computer in the security profile

  I can connect to the host via the HP Onboard Administrator, both the shell and the DCUI

  I use putty and I put the 3DES encryption cipher selection policy and I tried to tell the version of the SSH 2 Protocol only, I went back with only 2 and just selection 2

  I can connect to the host directly with root and with an admin account, that set up the shell and DCUI

  I know that root cannot ssh in the host since PermitRootLogin is set to no, I'm getting my secondary account

  I immediately receive an error "The network connection closed unexpectedly Server", so it's going to stop until I can grasp anything.

  Finally, the ESXishelltimeout is 900 seconds

  I don't know what the sshd_config fie since I edited it's just before I had this problem.

  Thanks for any input.

  file of sshd:

  # linking inetd

  # Port 2200

  Protocol 2

  HostKey/etc/ssh/ssh_host_rsa_key

  HostKey/etc/ssh/ssh_host_dsa_key

  UsePrivilegeSeparation Yes

  SyslogFacility auth

  LogLevel info

  PermitRootLogin not

  PrintMotd Yes

  PrintLastLog no

  TCPKeepAlive Yes

  X11Forwarding no

  The cipher 3des-ctr, aes128-ctr, aes192-ctr, aes256-ctr

  Mac hmac-sha1

  AllowTCPForwarding no

  GatewayPorts no

  Allowgroupscase

  GSSAPIAuthentication no

  KerberosAuthentication no

  LOCAL AcceptEnv

  PermitUserEnvironment no

  PermitTunnel not

  MaxSessions 1

  StrictModes yes

  RhostsRSAAuthentication no

  Compression without

  UsePAM Yes

  # use only challenge-response MAP (interactive keyboard)

  PasswordAuthentication no

  Banner/etc/issue

  Subsystem sftp/usr/lib/vmware/openssh/bin/sftp-server

  AuthorizedKeysFile /etc/ssh/keys-%u/authorized_keys

  #ListenAddress

  # 10-minute delay. The default value of ClientAliveCountMax is 3.

  # This is why, we get a 3 * 200 = 600 seconds timeout if the customer has been

  # does not.

  ClientAliveInterval 200

  I think I have figured it out, I think that the 'UsePrivilegeSeparation yes' line is causing the problem, I tried on another host and that seems to be.  I check just in case anyone has the problem in the future.

• ARD can not see remote clients via VPN

  Hi all. I found not been able to find an answer to what works. I appreciate the help.

  I have two networks, home and office, be it online by a router in Time Machine. I set up a VPN server in the office. I can however connect with success at home and can go up to the servers and can control the computer server in ARD. But I don't see any other machines on the network of the company unless I enter their IP directly, and even then I can't control them. I can control the server, and it can see and control the other remote machines. If I'm in the office, I can see and control all machines on the network.

  The network router is set to distribute addresses 10.0.1.2 - 200. The home network is set to distribute addresses of 10.0.1.201 - 250. The VPN server has address 10.0.1.250 - 255.

  What Miss me? Thank you very much.

  for VPN works normally your networks must be in a different IP address ranges

  you have everything in 10.0.1 range

  for example the Office Network 10.0.1.xxx

  network servant 10.0.1.xx

  This is maybe the reason why you cannot control the machines.

  VPN requires the Remote LAN to be on a different subnet/ip range

  If they are no routing etc. can get screwed up like router/VPN cannot know where things are

  Try to change your home network to a range of ip address/subnet different example 192.168.1.xx

• Best VPN server

  I use the VPN server through Server 5.1. However, I recently bought an EdgeRouter POE, and I plan to change to its VPN. Can someone offer advantages/disadvantages for one against the other?

  Thank you

  Jeff

  I have no experience using the EdgeRouter and it took quite some dig able to determine that this was the case to all VPN. It seems mainly focused on being a router Ethernet to Ethernet. However as mentioned, I finally found a reference, which suggests he can do the following VPN protocols.

  • IPSec Site to Site and remote access
  • OpenVPN Site‐to‐Site and remote access
  • RAS PPTP
  • Remote access L2TP
  • PPTP client

  Download and read the whole manual I don't remember not its VPN features.

  I can say that I gave up on VPN server own Apple as it supports only L2TP and PPTP that these two days are considered to be weak from a security point of view and which can be used for VPN on demand configurations. I now use StrongSwan5 which allows to make a Linux server

  • IKEv2 Site to Site and remote access
  • IPSec Site to Site and remote access

  Both being able to VPN on demand.

  IKEv2 is currently considered the most secure VPN solution. IKEv2 is supported the use of VPN client built into El Capitan and iOS 9.

  StrongSwan5 works with the built-in VPN Apple customer and StrongSwan5 supports the use of SSL certificates, it also supports force all traffic through the VPN - a common requirement of companies configuration VPN connection.

• synchronize contacts from Mac OS x Server for iCloud

  HI, I'm migrating to use another contacts (Daylite) back to iCloud and mac Contacts Manager. My main contacts are in Mac OS x Server and are configured for synchronization between Daylite and mac Contacts, so my iCloud is not my correct contact list. Can anyone help or point me to an article or a message describing exactly how to:

  -delete the contacts that I have currently in iCloud

  -import all my contacts of CardDav in iCloud and start again?

  I guess after that, to synchronize contacts between iCloud and mac Contacts, all I do is iCloud account active Contact "accounts"?

  Thank you very much

  Diana

  PS. I use mac OS X 10.10.5

  Howdy Diana,

  I understand that you're looking to remove all existing contacts from iCloud, and then import contacts from another service of Mac OS x Server to iCloud. The first step in the process is delete contacts to iCloud as detailed in the article below (note: multiple contacts can be selected via the SHIFT key).

  iCloud: remove a contact
  https://support.Apple.com/kb/PH12079

  Once your iCloud contacts have been deleted and he and Mac OS x Server accounts have been set up on your Mac, use the article in the link below to first export the contacts from your Mac OS x Server account (again, several contacts can be selected here). Once exported, remove the account from Mac OS x Server for your Mac, and then import them into your iCloud account.

  Contacts: Export and import your contacts
  https://support.Apple.com/kb/ph11586

  OS X Yosemite: add your Twitter, Facebook and other Internet accounts
  https://support.Apple.com/kb/PH18993

  Contacts (Yosemite): Accounts Preferences
  https://support.Apple.com/kb/PH19687

  Kind regards!

• Unable to connect to the Internet after connecting to a VPN server.

  As soon as I connect to the VPN, I can't access the Web or e-mail.

  An article published by Microsoft Support to http://support.microsoft.com/kb/317025 seems to refer to the same problem. However, it is for Win 2000 and NT platforms, not XP. The problem seems to be due to the VPN connection (being configured) to use the default gateway on the remote network.

  Issues related to the:

  1. The problem indeed because the VPN connection is configured to use the default gateway on the remote network?
  2. If so, a) how can I know if it's like my VPN connection is configured and b) how I set up so I can use VPN to the network remotely and still being able to use internet locally?

  Thank you.

  Realize that the VPN is intended to establish a secure connection to a remote network via a public internet.  Allowing a client computer at the same time secure access that a secure network and a public network may pose a risk to data leaks out of the network security in the public internet.  If "split tunneling" VPN server controls is allowed on a client computer.  If allowed by the side of the VPN server, the client computer accesses the VPN and the internet by unchecking the 'use Gateway on the remote network' box.  For more information:

  "Split Tunneling for concurrent access to the Internet and an Intranet"
    <>http://TechNet.Microsoft.com/en-us/library/bb878117.aspx >

  HTH,
  JW